sun pharmaceutical industries, inc. - Medication Listings

Dexmethylphenidate hydrochloride tablets contain dexmethylphenidate hydrochloride, a CNS stimulant. Dexmethylphenidate hydrochloride is the d-threo enantiomer of racemic methylphenidate hydrochloride. Dexmethylphenidate hydrochloride tablets are available as 2.5 mg, 5 mg, and 10 mg strength tablets for oral administration. Chemically, dexmethylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, (R,R’)-(+)-. Its molecular formula is C 14 H 19 NO 2 •HCl. Its structural formula is: Note: * = asymmetric carbon centers Dexmethylphenidate hydrochloride is a white to off-white powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: FD&C Blue No.1 aluminum lake (2.5 mg tablet), D&C Yellow Lake No. 10 aluminum lake (5 mg tablet). The 10 mg tablet contains no dye. Lactose monohydrate, magnesium stearate, sodium starch glycolate, talc. Chemical Structure

A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, I-amphetamine aspartate. EACH TABLET CONTAINS 5 mg 7.5 mg 10 mg 12.5 mg 15 mg 20 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Aspartate Monohydrate Equivalent 1.25 mg 1.25 mg of Amphetamine Aspartate Monohydrate equivalent to 1.17 mg Amphetamine Aspartate (Anhydrous) as supplied 1.875 mg 1.875 mg of Amphetamine Aspartate Monohydrate equivalent to 1.755 mg Amphetamine Aspartate (Anhydrous) as supplied 2.5 mg 2.5 mg of Amphetamine Aspartate Monohydrate equivalent to 2.34 mg Amphetamine Aspartate (Anhydrous) as supplied 3.125 mg 3.125 mg of Amphetamine Aspartate Monohydrate equivalent to 2.925 mg Amphetamine Aspartate (Anhydrous) as supplied 3.75 mg 3.75 mg of Amphetamine Aspartate Monohydrate equivalent to 3.51 mg Amphetamine Aspartate (Anhydrous) as supplied 5 mg 5 mg of Amphetamine Aspartate Monohydrate equivalent to 4.6 mg Amphetamine Aspartate (Anhydrous) as supplied 7.5 mg 7.5 mg of Amphetamine Aspartate Monohydrate equivalent to 7.03 mg Amphetamine Aspartate (Anhydrous) as supplied Dextroamphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Total Amphetamine Base Equivalence 3.13 mg 4.7 mg 6.3 mg 7.8 mg 9.4 mg 12.6 mg 18.8 mg In addition, each tablet for oral administration contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, and pregelatinized corn starch. The 5 mg, 7.5 mg and 10 mg tablets contain D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake. The 12.5 mg, 15 mg, 20 mg, and 30 mg tablets contain D&C Yellow #10 Aluminum Lake.

Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules contain mixed salts of a single-entity amphetamine, a CNS stimulant. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules contains equal amounts (by weight) of four salts: dextroamphetamine sulfate and amphetamine sulfate, dextroamphetamine saccharate and amphetamine aspartate monohydrate. This results in a 3:1 mixture of dextro- to levo- amphetamine base equivalent. The 12.5 mg, 25 mg, 37.5 mg and 50 mg strength capsules are for oral administration. They contain three types of drug- releasing beads, an immediate release and two different types of delayed release (DR) beads. The first DR bead releases amphetamine at pH 5.5 and the other DR bead releases amphetamine at pH 7.0. CAPSULE STRENGTHS EACH CAPSULE CONTAINS: 12.5 mg 25 mg 37.5 mg 50 mg Dextroamphetamine Saccharate 3.125 mg 6.250 mg 9.375 mg 12.500 mg Amphetamine Aspartate Monohydrate 3.125 mg 6.250 mg 9.375 mg 12.500 mg Dextroamphetamine Sulfate 3.125 mg 6.250 mg 9.375 mg 12.500 mg Amphetamine Sulfate 3.125 mg 6.250 mg 9.375 mg 12.500 mg Total mixed amphetamine salts 12.500 mg 25 mg 37.5 mg 50 mg Total amphetamine base equivalence 7.8 mg 15.6 mg 23.5 mg 31.3 mg Inactive Ingredients and Colors: The inactive ingredients in dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules include: ammonio methacrylate copolymer (Type B), dibutyl sebacate, ethylcellulose, FD&C Yellow #6, FD&C Blue #2, gelatin, hypromellose, methacrylic acid copolymer (Type-C), polyethylene glycol, sugar spheres, talc, titanium dioxide, triethyl citrate, yellow iron oxide and edible inks. The 37.5 mg strength capsule also contains red iron oxide. The 50 mg strength capsule also contains D&C Red #28, D&C Red #33, and FD&C Blue #1.

Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release contain mixed salts of a single-entity amphetamine, a CNS stimulant. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules contain equal amounts (by weight) of four salts: dextroamphetamine sulfate, amphetamine sulfate, dextroamphetamine saccharate and amphetamine (D,L)-aspartate monohydrate. This results in a 3.1:1 mixture of dextro- to levo- amphetamine base equivalent. The 5 mg, 10 mg, 15 mg, 20 mg, 25 mg and 30 mg strength extended release capsules are for oral administration. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules contain two types of drug-containing beads (immediate-release and delayed release) which prolong the release of amphetamine compared to the dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate (immediate-release) tablet formulation. Each capsule contains: Capsule Strength 5 mg 10 mg 15 mg 20 mg 25 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 2.5 mg 3.75 mg 5 mg 6.25 mg 7.5 mg Amphetamine (D,L)-Aspartate Monohydrate 1.25 mg 2.5 mg 3.75 mg 5 mg 6.25 mg 7.5 mg Dextroamphetamine Sulfate 1.25 mg 2.5 mg 3.75 mg 5 mg 6.25 mg 7.5 mg Amphetamine Sulfate 1.25 mg 2.5 mg 3.75 mg 5 mg 6.25 mg 7.5 mg Total amphetamine base equivalence 3.1 mg 6.3 mg 9.4 mg 12.5 mg 15.6 mg 18.8 mg d-amphetamine base equivalence 2.4 mg 4.7 mg 7.1 mg 9.5 mg 11.9 mg 14.2 mg l-amphetamine base equivalence 0.75 mg 1.5 mg 2.3 mg 3.0 mg 3.8 mg 4.5 mg Inactive Ingredients and Colors The inactive ingredients in dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate, amphetamine sulfate extended-release capsules contain: black iron oxide, colloidal silicon dioxide, FD&C Blue #2, FD&C Yellow #6, gelatin, hypromellose, methacrylic acid copolymer Type-B, methacrylic acid copolymer Type-C, polyethylene glycol, propylene glycol, shellac, sugar spheres, talc, titanium dioxide, and triethyl citrate. The 20 mg, 25 mg, and 30 mg capsules also contains yellow iron oxide and red iron oxide.

Diclofenac sodium topical solution USP, 1.5% is a nonsteroidal anti-inflammatory drug, available as a clear, colorless to faintly pink-orange solution for topical application. Diclofenac sodium topical solution contains 1.5% w/w diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug (NSAID), designated chemically as 2-[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14 H 10 Cl 2 NNaO 2 and it has the following structural formula: Each 1 mL of solution contains 16.05 mg of diclofenac sodium. In addition, diclofenac sodium topical solution contains the following inactive ingredients: dimethyl sulfoxide USP (DMSO, 45.5% w/w), ethanol, glycerin, propylene glycol and purified water. Chemical Structure

Diclofenac Sodium Topical Gel, 3%, intended for dermatologic use, contains the active ingredient, diclofenac sodium, in a clear, transparent, colorless to slightly yellow gel base. Diclofenac sodium is a white to slightly yellow crystalline powder. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in water, slightly soluble in acetone, and partially insoluble in ether. The chemical name for diclofenac sodium is: Sodium [ o -(2,6-dichloranilino) phenyl] acetate Diclofenac sodium has a molecular weight of 318.13. The CAS number is CAS-15307-79-6. The structural formula is represented below: Diclofenac Sodium Topical Gel, 3% also contains benzyl alcohol, hyaluronate sodium, polyethylene glycol monomethyl ether, and purified water. 1 g of diclofenac sodium topical gel contains 30 mg of the active substance, diclofenac sodium. Chemical Structure

Diclofenac sodium topical solution USP, 2% contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to slightly pink or orange solution for topical application. The chemical name is 2[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14 H 10 Cl 2 NNaO 2 , and it has the following chemical structure: Each 1 gram of solution contains 20 mg of diclofenac sodium. The inactive ingredients: dimethyl sulfoxide USP (DMSO, 45.5% w/w), ethanol (31.46% v/v), hydroxypropyl cellulose, propylene glycol and purified water. Chemical Structure

Diflorasone diacetate cream USP, 0.05% contains the active compound diflorasone diacetate, a synthetic corticosteroid for topical dermatological use. Chemically, diflorasone diacetate is 6α, 9α-difluoro-11β,17,21-trihydroxy-16-methylpregna-1,4-diene-3,20-dione 17,21 diacetate, with the empirical formula C 26 H 32 F 2 O 7 , a molecular weight of 494.5, and the following structural formula: Each gram of diflorasone diacetate cream USP, 0.05% contains 0.5 mg diflorasone diacetate in a cream base consisting of butylated hydroxytoluene, cetyl alcohol, citric acid, glyceryl stearate/PEG 100 stearate, isopropyl myristate, lanolin alcohol, mineral oil, monobasic sodium phosphate, polyoxyl 40 stearate, polysorbate 60, propylene glycol, purified water, sorbitan monostearate and vegetable oil. Chemical Structure

Each gram of diflorasone diacetate ointment contains 0.5 mg diflorasone diacetate in an ointment base. Chemically, diflorasone diacetate is 6α,9-difluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-diacetate. The structural formula is represented below: molecular formula: C 26 H 32 F 2 O 7 molecular weight: 494.54 Each gram of diflorasone diacetate ointment contains 0.5 mg diflorasone diacetate in an ointment base of glyceryl monostearate, propylene glycol and white petrolatum. Chemical Structure

Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata . The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[( O -2,6-dideoxy-β- D - ribo -hexopyranosyl(1→4)- O -2,6- dideoxy-β- D - ribo -hexopyranosyl-(1→4)-2,6-dideoxy-β- D - ribo- hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C 41 H 64 O 14 , its molecular weight is 780.95, and its structural formula is: Digoxin exists as odorless white crystals that melt with decomposition above 230°C. The drug is practically insoluble in water and in ether; slightly soluble in diluted (50%) alcohol and in chloroform; and freely soluble in pyridine. Digoxin is supplied as 125 mcg (0.125 mg) or 250 mcg (0.25 mg) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: lactose monohydrate, hydroxypropyl methylcellulose, magnesium stearate. In addition, the dye used in the 0.125 mg tablets is D & C Yellow No. 10 aluminum lake. Structure

Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5H)one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The chemical structure is: Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, formic acid, methanol, and chloroform. It has a molecular weight of 450.98. Diltiazem hydrochloride extended-release capsule, USP (Once-a-day dosage) is formulated as a once-a-day extended-release capsule containing 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem), 180 mg diltiazem hydrochloride (equivalent to 165.45 mg diltiazem), 240 mg diltiazem hydrochloride (equivalent to 220.6 mg diltiazem), 300 mg diltiazem hydrochloride (equivalent to 275.75 mg diltiazem), or 360 mg diltiazem hydrochloride (equivalent to 330.9 mg diltiazem). The 120 mg, 180 mg, 240 mg, 300 mg and 360 mg contain: sugar spheres, hypromellose, talc, ethylcellulose, triethyl citrate, ammonio methacrylate copolymer dispersion type B, acetyl tributyl citrate, polysorbate 80, and magnesium stearate. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide, FD & C Blue 1 and iron oxide black (180 mg, 240 mg, 300 mg and 360 mg). Imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. For oral administration. FDA approved dissolution test specifications differ from USP. structure

Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,-3-dihydro-2(4-methoxyphenyl)-, mono-hydrochloride, (+)-cis. The chemical structure is: Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol and chloroform and has a molecular weight of 450.98. Diltiazem hydrochloride extended-release capsules, USP, for oral administration, contain diltiazem hydrochloride, USP in extended-release pellets at doses of 120, 180, 240, 300 and 360 mg. Diltiazem hydrochloride extended-release capsules also contain: Sugar Spheres NF, Hypromellose USP, Talc USP, Ethyl Cellulose NF, Triethyl Citrate NF. The capsule shells contain gelatin, titanium dioxide, sodium lauryl sulfate, FD & C Blue 1, FD & C Red 3 (120 mg, 240 mg, and 300 mg), FD & C Green 3 (180 mg, 240 mg, and 360 mg), and D & C Yellow 10 (180 mg, 240 mg, and 360 mg). Imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. Meets USP dissolution test 25. spl-diltiazem-hcl-structure

Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1, 5-Benzothiazepin-4(5 H )-one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)- cis -. The chemical structure is: Diltiazem hydrochloride, USP is a white, odorless crystalline powder or small crystals. It is freely soluble in chloroform, formic acid, methanol, and water. It is sparingly soluble in dehydrated alcohol and is insoluble in ether. It has a molecular weight of 450.98. Diltiazem hydrochloride is formulated as a once-a-day extended-release capsule containing 120 mg diltiazem hydrochloride, USP (equivalent to 110.3 mg diltiazem), 180 mg diltiazem hydrochloride, USP (equivalent to 165.45 mg diltiazem), 240 mg diltiazem hydrochloride, USP (equivalent to 220.6 mg diltiazem), 300 mg diltiazem hydrochloride, USP (equivalent to 275.75 mg diltiazem), or 360 mg diltiazem hydrochloride, USP (equivalent to 330.9 mg diltiazem). The 120 mg, 180 mg, 240 mg, 300 mg and 360 mg capsules also contain: acetyl tributyl citrate, ammonio methacrylate copolymer dispersion, hypromellose, sodium lauryl sulfate, sugar spheres (sucrose and corn starch), and talc. The 120 mg, 180 mg, 240 mg, 300 mg, and 360 mg capsule shells contain FD&C Blue #1, gelatin, sodium lauryl sulfate, and titanium dioxide. The 180 mg, 240 mg, 300 mg, and 360 mg capsule shells also contain iron oxide black. The 120 mg, 180 mg, 300 mg, and 360 mg capsules are imprinted with black ink which contains iron oxide black, potassium hydroxide, propylene glycol, and shellac. The 240 mg capsules are imprinted with white ink which contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide. For oral administration. Meets USP dissolution test 29. chemical structure

Uses temporarily relieves pain and itching associated with: insect bites minor burns sunburn minor skin irritations minor cuts scrapes rashes due to poison ivy, poison oak, and poison sumac dries the oozing and weeping of poison ivy, poison oak, and poison sumac

Divalproex sodium is a stable coordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure: Divalproex sodium occurs as a white powder with a characteristic odor. Divalproex sodium delayed-release tablets are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients Divalproex sodium delayed-release tablets: colloidal silicon dioxide, corn starch, povidone, pregelatinized maize starch, hypromellose, titanium dioxide, triacetin, methacrylic acid copolymer type C, talc, triethyl citrate, colloidal anhydrous silica, sodium bicarbonate, and sodium lauryl sulfate. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol, and ammonium hydroxide. In addition, individual tablets contain: 125 mg tablets: FD&C Red #40, and FD&C Blue #2 250 mg tablets: FD&C Yellow #6, and iron oxide yellow 500 mg tablets: D&C Red #30, FD&C Blue #2, and iron oxide red spl-divalproex-structure

Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel (anhydrous) is (2R,3S)-N-carboxy-3-phenylisoserine,N- tert -butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula: Docetaxel anhydrous, USP is a white to almost-white powder with molecular formula of C 43 H 53 NO 14 , and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. One-vial DOCETAXEL INJECTION DOCETAXEL INJECTION USP is a sterile, non-pyrogenic, yellowish colour solution at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) and 4 mg citric acid anhydrous in 0.54 grams polysorbate 80 and 0.395 grams dehydrated alcohol (50% v/v) solution. DOCETAXEL INJECTION USP is available in single-dose vials containing 20 mg (1 mL), 80 mg (4 mL), or 160 mg (8 mL) docetaxel (anhydrous). DOCETAXEL INJECTION USP requires NO prior dilution with a diluent and is ready to add to the infusion solution. spl-docetaxel-chemical-structure

Uses treats cold sores/fever blisters on the face or lips shortens healing time and duration of symptoms: tingling, pain, burning, and/or itching

Dofetilide is an antiarrhythmic drug with Class III (cardiac action potential duration prolonging) properties. Its molecular formula is C 19 H 27 N 3 O 5 S 2 and it has a molecular weight of 441.6. The structural formula is The chemical name for dofetilide is: N -[4-[2-[methyl[2-[4-[(methylsulfonyl)amino]phenoxy]ethyl]amino]ethyl]phenyl]-methanesulfonamide. Dofetilide, USP is a white to off-white powder. It is very slightly soluble in water and propan-2-ol and is soluble in 0.1M aqueous sodium hydroxide, acetone, and aqueous 0.1M hydrochloric acid. Dofetilide capsules contain the following inactive ingredients: silicified microcrystalline cellulose, corn starch and magnesium stearate. The components of the hard gelatin capsule shell include gelatin, FD&C Yellow 6 and titanium dioxide. Black imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. Dofetilide capsule is supplied for oral administration in three dosage strengths: 125 mcg (0.125 mg) light orange and white capsules, 250 mcg (0.25 mg) peach capsules, and 500 mcg (0.5 mg) peach and white capsules. dofetilide-structure

Uses first aid to help prevent infection in minor cuts scrapes burns

Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19 H 21 NO ∙ HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula: Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b,e ] oxepin-11 (6 H )ylidene- N,N -dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. The empty gelatin capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg empty gelatin capsule shells contain iron oxide red and iron oxide yellow, the 25 mg and 50 mg empty gelatin capsule shells contain D&C Yellow 10 and FD&C Yellow 6, and the 75 mg and 100 mg empty gelatin capsule shells contain D&C Yellow 10 and FD&C Blue 1. The imprinting ink may contain ferrosoferric oxide, potassium hydroxide, propylene glycol and shellac glaze. Chemical Structure

Doxepin tablets are available in 3 mg and 6 mg strength for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride USP, equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-Dibenz[ b,e ]oxepin-11(6 H )ylidene- N,N -dimethyl 1-Propanamine, Hydrochloride. It has the following structure formula: Doxepin hydrochloride USP appears as white or almost white crystalline powder, that is freely soluble in water. It has a molecular weight of 315.84 g/mole and molecular formula of C 19 H 21 NO∙HCl. Each doxepin tablet includes the following inactive ingredients: colloidal silicone dioxide, lactose anhydrous, magnesium stearate and microcrystalline cellulose. The 3 mg tablet also contains FD&C Blue No. 1. The 6 mg tablet also contains FD&C Yellow No. 10 and FD&C Blue No. 1 Chemical Structure

The active ingredient in doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C 27 H 29 NO 11 • HCl; its molecular weight is 579.99. The structural formula is: Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.50 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH control; and sucrose, 100 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. spl-doxorubicin-structure spl-doxorubicin-structure1 spl-doxorubicin-structure2 spl-doxorubicin-figure

Doxorubicin hydrochloride is a cytotoxic, anthracycline, topoisomerase II inhibitor isolated from cultures of Streptomyces peucetius var. caesius. Chemically, doxorubicin hydrochloride is: 5,12-Naphthacenedione, 10-[(3-amino-2,3,6-trideoxy-α-L- lyxo -hexopyranosyl)oxy]-7,8,9,10­ tetrahydro-6,8,11-trihydroxy-8-(hydroxylacetyl)-1-methoxy-, hydrochloride (8S- cis )-. The chemical structure of doxorubicin hydrochloride is: DOXOrubicin hydrochloride injection, USP is a clear, red-orange, sterile, isotonic aqueous solution provided in vials containing 50 mg/25 mL or 200 mg/100 mL of doxorubicin hydrochloride. The drug product has demonstrated inherent antimicrobial activity suitable for a multiple dose presentation. Each milliliter of solution contains 2 mg of doxorubicin hydrochloride. Inactive ingredients include sodium chloride 0.9% and water for injection quantity sufficient. The pH of the solution is adjusted to 3 with hydrochloric acid. doxorubicin-chem-str

Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules, USP 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate, USP equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the yellow crystalline powder is 4-(Dimethylamino)-1,4,4a,5,5a,6, 11,12a- octahydro-3,5,10,-12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide monohydrate. Structural formula: C22H24N2O8 • H2O M.W. = 462.46 Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline monohydrate, USP equivalent to 50 mg, 75 mg or 100 mg of doxycycline. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The capsule shell contains D&C Red No. 28, FD&C Blue No. 1, gelatin, and titanium dioxide. The edible printing ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. Doxy001

Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula: C 22 H 24 N 2 O 8 •H 2 O Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form figure 1

Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) capsules and tablets for oral administration. The chemical designation of this light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Doxycycline hyclate has the following structural formula: Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg doxycycline (anhydrous). Inactive ingredients for capsules are: anhydrous lactose, croscarmellose sodium, FD&C Blue #1, gelatin, magnesium stearate, microcrystalline cellulose, and titanium dioxide. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg doxycycline. Inactive ingredients for tablets are: lactose monohydrate, carnauba wax, croscarmellose sodium, D&C Yellow #10 aluminum lake, FD&C Red #40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, and titanium dioxide. R:\Regulatory\spl\Jennifer\Doxycycline Caps\Pictures\doxycycline-01.jpg

Doxycycline hyclate is available as a 20 mg tablet formulation of doxycycline for oral administration. The structural formula of doxycycline hyclate is: with an empirical formula of (C 22 H 24 N 2 O 8 •HCl) 2 •C 2 H 6 O•H 2 O and a molecular weight of 1025.89. The chemical designation for doxycycline is 4-(dimethylamino)-1, 4, 4a, 5, 5a, 6, 11, 12a-octahydro-3, 5, 10, 12, 12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow to light-yellow crystalline powder which is soluble in water. Each tablet for oral administration contains 23 mg doxycycline hyclate equivalent to 20 mg of doxycycline. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, titanium dioxide, and triacetin. Chemical Structure

Droxidopa capsules contain droxidopa, which is a synthetic amino acid precursor of norepinephrine, for oral administration. Chemically, droxidopa is (–)-threo-3-(3,4-Dihydroxyphenyl)-L-serine. It has the following structural formula: Droxidopa is a white to light brown crystalline powder. It is soluble in dilute hydrochloric acid and practically insoluble in methanol, glacial acetic acid, ethanol, acetone, ether, and chloroform. It has a molecular weight of 213.19 and a molecular formula of C 9 H 11 NO 5 . Droxidopa capsules also contain the following inactive ingredients: corn starch, magnesium stearate, and mannitol. The capsule shell is printed with black ink. The black inks contain ferrosoferric oxide, potassium hydroxide, and shellac. The capsule shell contains the following inactive ingredients: 100 mg–FD&C Blue No. 2, gelatin, titanium dioxide; 200 mg–ferric oxide yellow, gelatin, titanium dioxide; 300 mg–FD&C Blue No. 1, FD&C Red No. 40, FD&C Yellow No. 5 (tartrazine), gelatin, titanium dioxide. Droxidopa capsules differ in size and color by strength [see Dosage Forms and Strengths (3)] . spl-droxidopa-capsules-structure

Econazole nitrate cream contains the antifungal agent, econazole nitrate USP 1%, in a water-miscible base consisting of benzoic acid, butylated hydroxytoluene, mineral oil, oleoyl polyoxylglycerides PEG-6-32 stearate/glycol stearate and purified water. The white to off-white soft cream is for topical use only. Chemically, econazole nitrate is 1-[2-{(4-chloro-phenyl) methoxy}-2-(2,4-dichlorophenyl)ethyl]-1H-imidazole mononitrate. Its structure is as follows: Chemical Structure

Entacapone is available as tablets containing 200 mg entacapone. Entacapone is an inhibitor of catechol‑ O ‑methyltransferase (COMT), used in the treatment of Parkinson’s disease as an adjunct to levodopa and carbidopa therapy. It is a nitrocatechol‑structured compound with a relative molecular mass of 305.29. The chemical name of entacapone is (E)‑2‑cyano‑3‑(3,4‑dihydroxy‑5‑nitrophenyl)‑N,N‑diethyl‑2‑ propenamide. Its empirical formula is C 14 H 15 N 3 O 5 and its structural formula is: The inactive ingredients of the Entacapone Tablets are microcrystalline cellulose, mannitol, croscarmellose sodium, hydrogenated vegetable oil, hydroxypropyl methylcellulose, polysorbate 80, glycerol 85%, sucrose, magnesium stearate, yellow iron oxide, red iron oxide, and titanium dioxide. structure

Epoprostenol sodium is the sodium salt of epoprostenol, formulated as a sterile lyophilized cake or powder for intravenous (IV) administration. Each vial of epoprostenol for injection contains epoprostenol sodium equivalent to either 0.5 mg (500,000 ng) or 1.5 mg (1,500,000 ng) epoprostenol, 100 mg sucrose, and 5 mg glycine. Sodium hydroxide is added to adjust pH. Epoprostenol (PGI 2 , PGX, prostacyclin), a metabolite of arachidonic acid, is a naturally occurring prostaglandin with potent vasodilatory activity and inhibitory activity of platelet aggregation. Epoprostenol is (5Z,9α,11α,13E,15S)-6,9-epoxy-11,15-dihydroxy-prosta-5,13-dien-1-oic acid, sodium salt. Epoprostenol sodium has a molecular weight of 374.45 and a molecular formula of C 20 H 31 NaO 5 . The structural formula is: Epoprostenol for injection is a white to off-white lyophilized cake or powder material. It is reconstituted with Sterile Water for Injection, USP, or Sodium Chloride 0.9% Injection, USP. The reconstituted solution of epoprostenol for injection has a pH ranging from 12.0 to 13.2 and is increasingly unstable at a lower pH. spl-epoprostenol-structure

Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula: Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C 22 H 24 ClN 3 O 4 and a molecular weight of 429.90. The molecule has a pK a of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0 Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide. structure

Escitalopram oxalate is an orally administered selective serotonin reuptake inhibitor (SSRI). Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula: The molecular formula is C 20 H 21 FN 2 O ∙ C 2 H 2 O 4 and the molecular weight is 414.40. Escitalopram oxalate occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram oxalate is available as an oral solution. Escitalopram oral solution USP contains escitalopram oxalate equivalent to 1 mg/mL escitalopram base. It also contains the following inactive ingredients: citric acid, glycerin, malic acid, methylparaben, natural peppermint flavor, propylene glycol, propylparaben, purified water, sodium citrate, and sorbitol. Chemical Structure

Eszopiclone is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.82, and its empirical formula is C 17 H 17 ClN 6 O 3 . Eszopiclone has a single chiral center with an ( S )-configuration. It has the following chemical structure: Eszopiclone is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone is formulated as film-coated tablets for oral administration. Eszopiclone tablets contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, hypromellose, polyethylene glycol, polysorbate 80 (for 1 mg & 2 mg), FD&C Blue #2 (for 1 mg & 3 mg), FD&C Yellow #6 (for 3 mg) and FD&C Red #40 (for 3 mg). chemical-structure

Febuxostat is a xanthine oxidase inhibitor. The active ingredient in febuxostat tablets is 2-[3-cyano-4-(2-methylpropoxy) phenyl]-4-methylthiazole-5-carboxylic acid, with a molecular weight of 316.38. The molecular formula is C 16 H 16 N 2 O 3 S. The chemical structure is: Febuxostat is a non-hygroscopic, white to off white crystalline powder that is freely soluble in dimethylformamide; soluble in dimethylsulphoxide; sparingly soluble in ethanol; slightly soluble in methanol and acetonitrile; and practically insoluble in water. The melting range is 200°C to 202°C. Febuxostat tablets for oral use contain the active ingredient, febuxostat, and are available in two dosage strengths, 40 mg and 80 mg. Inactive ingredients include microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, sodium lauryl sulfate, hydroxypropyl cellulose, croscarmellose sodium and magnesium stearate. Febuxostat tablets are coated with polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake and iron oxide yellow. structure

Fenofibrate capsules, USP, is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as capsules for oral administration. Each capsule contains 43 mg or 130 mg of micronized fenofibrate, USP. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, l-methylethyl ester with the following structural formula: The molecular formula is C 20 H 21 O 4 Cl and the molecular weight is 360.83; fenofibrate (micronized), USP is practically insoluble in water, very soluble in methylene chloride, slightly soluble in alcohol. The melting point is 79° to 82° C. Fenofibrate (micronized), USP is a white or almost white crystalline powder. Inactive Ingredients: Each gelatin capsule contains hypromellose, pregelatinized starch (maize), simethicone emulsion, sodium lauryl sulfate, sodium stearyl fumarate and talc. The gelatin capsules also contain gelatin and titanium dioxide. The imprinting ink contains ferric oxide black, potassium hydroxide, propylene glycol, and shellac. Meets USP Dissolution Test 2. Structure

Fenofibrate, USP is a lipid regulating agent available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate, USP. The chemical name for fenofibrate, USP is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula: The molecular formula is C 20 H 21 O 4 Cl and the molecular weight is 360.83; fenofibrate, USP is very soluble in methylene chloride, slightly soluble in alcohol and practically insoluble in water. The melting point is 79-82° C. Fenofibrate, USP is a white or almost white crystalline powder. Inactive Ingredients Each film-coated tablet contains colloidal silicon dioxide, crospovidone, hypromellose (3 cps), microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, sucrose, sodium lauryl sulfate, sodium stearyl fumarate, soybean lecithin, talc, titanium dioxide, and xanthan gum. Meets USP Dissolution Test 1. Structural Formula

Uses temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: runny nose sneezing itchy, watery eyes itching of the nose or throat temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies reduces swelling of nasal passages temporarily relieves sinus congestion and pressure temporarily restores freer breathing through the nose

Finasteride tablets USP, 1 mg contain finasteride as the active ingredient. Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). The chemical name of finasteride is N-tert -Butyl-3-oxo-4-aza-5α-androst-1-ene-17β-carboxamide. The molecular formula of finasteride is C 23 H 36 N 2 O 2 and its molecular weight is 372.55. Its structural formula is: Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents but is practically insoluble in water. Finasteride tablets USP, 1 mg are film-coated tablets for oral administration. Each tablet contains 1 mg of finasteride USP and the following inactive ingredients: lactose monohydrate, corn starch, microcrystalline cellulose, povidone, docusate sodium, talc, sodium starch glycolate type A potato, magnesium stearate, hypromellose, yellow iron oxide, titanium dioxide, polyethylene glycol, and iron oxide red. finasteride-structure

Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17β)-. The molecular formula of finasteride is C 23 H 36 N 2 O 2 and its molecular weight is 372.55. Its structural formula is: Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets USP, 5 mg for oral administration are film-coated tablets that contain 5 mg of finasteride USP and the following inactive ingredients: lactose monohydrate, corn starch, microcrystalline cellulose, povidone, docusate sodium, talc, sodium starch glycolate type A potato, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, and FD&C Blue #2 aluminum lake. finasteride-structure

Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below: Fingolimod hydrochloride is a white to off white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate and polacrilin potassium. Components of the gelatin capsule include gelatin, iron oxide yellow, sodium lauryl sulfate, titanium dioxide and water. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. chemical-structure

Fluocinolone acetonide Scalp Oil, 0.01% contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide, 0.01% for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide scalp oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide scalp oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Chemical Structure

Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide 0.01% Solution (each mL contains 0.1 mg Fluocinolone Acetonide) in a water-washable base containing citric acid and propylene glycol. Chemical Structure

Fluocinolone acetonide topical oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β,16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis(oxy)]-pregna-1,4 diene-3,20- dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone acetonide topical oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide topical oil has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, and refined peanut oil. Fluocinolone acetonide topical oil is formulated with 48% refined peanut oil NF. Physicians should use caution in prescribing Fluocinolone Acetonide 0.01% Topical Oil for peanut-sensitive individuals. Chemical Structure

Fluocinonide cream USP, 0.1% contains fluocinonide, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Fluocinonide has the chemical name 6 alpha, 9 alpha-difluoro-11 beta, 21-dihydroxy-16 alpha, 17 alpha-isopropylidenedioxypregna-1, 4-diene-3,20-dione 21-acetate. Its chemical formula is C 26 H 32 F 2 O 7 and it has a molecular weight of 494.58. It has the following chemical structure: Fluocinonide, USP is an almost odorless white to creamy white crystalline powder. It is practically insoluble in water and slightly soluble in ethanol. Each gram of fluocinonide cream USP, 0.1% contains 1 mg micronized fluocinonide in a cream base of carbomer 940 (carbopol 980), ceteareth-20, citric acid, diethylene glycol monoethyl ether (transcutol P), polyethylene glycol, propylene glycol, sorbitan monostearate, and trolamine. Chemical Structure

Fluocinonide Cream USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Mol. Formula: C 26 H 32 F 2 O 7 Mol. Wt: 494.53 Fluocinonide Cream USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated cream base consisting of citric acid, glycerin, 1,2,6-hexanetriol, polyethylene glycol-3350, polyethylene glycol-8000, propylene glycol and stearyl alcohol. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophylic properties. In the Fluocinonide Cream USP, 0.05% formulation, the active ingredient is totally in solution. Chemical Structure

Fluocinonide Cream USP, 0.05%, Fluocinonide Cream USP, 0.05% (Emulsified Base), Fluocinonide Gel USP, 0.05% and Fluocinonide Ointment USP, 0.05% are intended for topical administration. The active component in each is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinonide Cream USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated cream base consisting of citric acid, glycerin, 1,2,6-hexanetriol, polyethylene glycol-3350, polyethylene glycol-8000, propylene glycol and stearyl alcohol. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophylic properties. Fluocinonide Cream USP, 0.05% (Emulsified Base) contains fluocinonide 0.5 mg/g in a water-washable aqueous emollient base of cetyl alcohol, citric acid (anhydrous), mineral oil, polysorbate 60, propylene glycol, purified water, sorbitan monostearate, stearyl alcohol and white petrolatum. Fluocinonide Gel USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated gel base consisting of carbomer 940, edetate disodium, propyl gallate, propylene glycol, sodium hydroxide (to adjust pH) and purified water. This clear, colorless, thixotropic vehicle is greaseless, non-staining and completely water miscible. Fluocinonide Ointment USP, 0.05% contains fluocinonide 0.5 mg/g in a specially formulated ointment base consisting of glyceryl monostearate, propylene carbonate, propylene glycol, white petrolatum and white wax. It provides the occlusive and emollient effects desirable in an ointment. In the Fluocinonide Cream USP, 0.05%, Fluocinonide Gel USP, 0.05%, and Fluocinonide Ointment USP, 0.05% formulations, the active ingredient is totally in solution. Chemical Structure

Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α, 11β, 16α)-. It has the following chemical structure: Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution. Chemical Structure

Fosamprenavir calcium, USP is a prodrug of amprenavir, an inhibitor of HIV protease. The chemical name of fosamprenavir calcium, USP is (3S)-tetrahydrofuran-3-yl (1S,2R)-3-[[(4-aminophenyl) sulfonyl](isobutyl)amino]-1-benzyl-2-(phosphonooxy) propylcarbamate monocalcium salt. Fosamprenavir calcium, USP is a single stereoisomer with the (3S)(1S,2R) configuration. It has a molecular formula of C25H34CaN3O9PS and a molecular weight of 623.7. It has the following structural formula: Fosamprenavir calcium, USP is a white to cream color solid which is soluble in methanol. Fosamprenavir calcium tablets, USP are available for oral administration in a strength of 700 mg of fosamprenavir as fosamprenavir calcium, USP (equivalent to approximately 600 mg of amprenavir). Each 700 mg tablet contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, and povidone. The tablet coating contains the inactive ingredients ethylcellulose, ferric oxide red, hypromellose, talc, and titanium dioxide. The imprinting ink contains the inactive ingredients ferric oxide black, propylene glycol, and shellac. FDA approved dissolution test specifications differ from USP. Structure

Galantamine hydrobromide extended-release capsules contain galantamine, a reversible, competitive acetylcholinesterase inhibitor, as the hydrobromide salt. Galantamine hydrobromide is known chemically as (4a S ,6 R ,8a S )- 4a,5,9,10,11,12-hexahydro-3-methoxy-11-methyl-6 H -benzofuro [3a,3,2- ef ][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C 17 H 21 NO 3 •HBr and a molecular weight of 368.27. Galantamine hydrobromide is a white to almost white powder and is sparingly soluble in water. The structural formula for galantamine hydrobromide is: Galantamine hydrobromide extended-release capsules contain 8 mg, 16 mg, and 24 mg galantamine as 10.25 mg, 20.51 mg, and 30.76 mg of galantamine hydrobromide, USP, respectively. Inactive ingredients include pregelatinized maize starch, hypromellose, hydroxy propyl cellulose, colloidal silicon dioxide, magnesium stearate. The 16 mg capsule also contains ferric oxide (red). The 24 mg capsule also contains FD & C Yellow 6 Lake (15 to 18%). The capsule shells contain gelatin, and sodium lauryl sulfate. The capsule shells also contain one or more of the following: titanium dioxide, iron oxide red, iron oxide yellow. Imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. galantamine-structure