sun pharmaceutical industries, inc. - Medication Listings

Uses temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: runny nose itchy, watery eyes sneezing itching of the nose or throat

Uses temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: runny nose itchy, watery eyes sneezing itching of the nose or throat

Uses temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: runny nose itchy, watery eyes sneezing itching of the nose or throat

Chlorothiazide sodium is a diuretic and antihypertensive. It is 6-chloro- 2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide monosodium salt and its molecular weight is 317.71. Its molecular formula is C 7 H 5 ClN 3 NaO 4 S 2 and its structural formula is: Chlorothiazide sodium for injection, USP is a sterile lyophilized white powder and is supplied in a vial containing: Chlorothiazide sodium equivalent to chlorothiazide USP........................................ 500 mg Inactive ingredients: Mannitol .................................................................................................................. 250 mg Sodium hydroxide to adjust pH. Chlorothiazide is a diuretic and antihypertensive. It is 6-chloro- 2 H -1,2,4- benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C 7 H 6 ClN 3 O 4 S 2 and its structural formula is: It is a white, or practically white, crystalline powder with a molecular weight of 295.72, which is insoluble in water, but readily soluble in dilute aqueous sodium hydroxide. It is soluble in urine to the extent of about 150 mg per 100 mL at pH 7. chlorothiazide-Sodium-structure chlorothiazide-structure

Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula: C 17 H 19 ClN 2 S. HCl M.W. 355.33 g/mol Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP. spl-chlorpromazine-structure

Chlorthalidone is an oral antihypertensive/diuretic. It is a monosulfamyl diuretic that differs chemically from thiazide diuretics in that a double-ring system is incorporated in its structure. It is 2-chloro-5(1-hydroxy- 3-oxo-1- isoindolinyl) benzenesulfonamide with the following structural formula: Molecular Formula: C14H11ClN2O4S Molecular Weight: 338.76 Chlorthalidone, USP is practically insoluble in water, in ether, and in chloroform; soluble in methanol; slightly soluble in ethanol. Chlorthalidone tablets are available containing either 25 mg or 50 mg of chlorthalidone USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, povidone, lactose, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. In addition, the 25 mg yellow tablets contain FD&C Yellow #6 Lake and D&C Yellow #10 Lake. The 50 mg green tablets contain FD&C Blue #1 Lake and D&C Yellow #10 Lake. structure

Ciclopirox Shampoo 1% contains the synthetic antifungal agent, ciclopirox for topical use. Each gram (equivalent to 0.96 mL) of Ciclopirox Shampoo 1% contains 10 mg ciclopirox in a shampoo base consisting of disodium laureth sulfosuccinate, laureth-2, purified water USP, sodium chloride USP, and sodium laureth sulfate. Ciclopirox Shampoo is a colorless, translucent solution. The chemical name for ciclopirox is 6-cyclohexyl-1-hydroxy-4-methyl-2(1 H )-pyridone, with the empirical formula C 12 H 17 NO 2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is: Chemical Structure

Ciclopirox Olamine Cream USP, 1.0% is for topical use. Each gram of ciclopirox olamine cream USP contains 10 mg of ciclopirox olamine equivalent to 7.70 mg of ciclopirox in a water miscible vanishing cream base consisting of benzyl alcohol, cetyl alcohol, cocamide DEA, lactic acid, mineral oil, myristyl alcohol, octyldodecanol, polysorbate 60, purified water, sorbitan monostearate, and stearyl alcohol. Ciclopirox olamine cream contains a synthetic, broad-spectrum, antifungal agent ciclopirox (as ciclopirox olamine). The chemical name is 6-cyclohexyl-1-hydroxy-4-methyl-2(1 H )-pyridone, 2-aminoethanol salt. The CAS Registry Number is 41621-49-2. The chemical structure is: Chemical Structure

Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C 22 H 22 F 3 N⋅HCl with a molecular weight of 393.9 g/mol (hydrochloride salt) and 357.4 g/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white, crystalline powder that is soluble in methanol or 95% ethanol and slightly soluble in water. The hydrochloride salt of cinacalcet is described chemically as R-N-[3-(3-(trifluoromethyl)phenyl)propyl]-1-(1-naphthyl)ethylamine hydrochloride and has the following structural formula: Cinacalcet tablets are formulated as light-green, film-coated, oval-shaped tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33 mg, 66 mg, and 99 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: Pregelatinized maize starch, microcrystalline cellulose, hydroxypropyl cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Tablets are coated with titanium dioxide, lactose monohydrate, FD&C blue #2 aluminum lake, yellow iron oxide, hypromellose, triacetin, and polyethylene glycol. cinacalcet-chemical-structure

Ciprofloxacin and dexamethasone (ciprofloxacin 0.3% and dexamethasone 0.1%) sterile otic suspension contains the quinolone antimicrobial, ciprofloxacin hydrochloride, combined with the corticosteroid, dexamethasone, in a sterile, preserved suspension for otic use. Each mL of ciprofloxacin and dexamethasone otic suspension, USP contains ciprofloxacin hydrochloride, USP (equivalent to 3 mg ciprofloxacin base), 1 mg dexamethasone, USP, and 0.2 mg benzalkonium chloride (50%) as a preservative. The inactive ingredients are boric acid, sodium chloride, hydroxyl ethyl cellulose, tyloxapol, acetic acid, sodium acetate trihydrate, edetate disodium, and water for injection. Sodium hydroxide or hydrochloric acid may be added for adjustment of pH. Ciprofloxacin, a quinolone antimicrobial is available as the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid. The molecular formula is C 17 H 18 FN 3 O 3 •HCl•H 2 O. The molecular weight is 385.82 g/mol and the structural formula is: Figure 1: Structure of Ciprofloxacin Dexamethasone, 9-fluoro-11(beta),17,21-trihydroxy-16(alpha)-methylpregna-1,4-diene-3,20-dione, is a corticosteroid. The molecular formula is C 22 H 29 FO 5 . The molecular weight is 392.46 g/mol and the structural formula is: Figure 2: Structure of Dexamethasone spl-ciprofoxacin-structure spl-dexamethasone-structure

Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride, USP equivalent to 150 mg or 300 mg of clindamycin. Inactive ingredients: 150 mg - black iron oxide, corn starch, D&C Yellow #10, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide; 300 mg - black iron oxide, corn starch, FD&C Blue no. 1, gelatin, lactose monohydrate, magnesium stearate, potassium hydroxide, propylene glycol, shellac, talc, and titanium dioxide. The structural formula is represented below: C 18 H 33 ClN 2 O 5 S•HCl M.W. 461.45 The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6, 7, 8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside monohydrochloride. structure

Clindamycin Phosphate Topical Lotion, 1% contains clindamycin phosphate, USP, at a concentration equivalent to 10 mg clindamycin per milliliter. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The lotion contains cetostearyl alcohol (2.5%), glycerin, glyceryl stearate SE (with potassium monostearate), isostearyl alcohol (2.5%), methylparaben (0.3%), purified water, sodium lauroyl sarcosinate and stearic acid. The structural formula is represented below: The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). Chemical Structure

Clindamycin phosphate gel USP, 1% contains clindamycin phosphate, USP, at a concentration equivalent to 10 mg clindamycin per gram. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibacterial drug produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The gel contains allantoin, carbomer homopolymer type B, methylparaben, polyethylene glycol 400, propylene glycol, purified water and sodium hydroxide. The structural formula is represented below: The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). Chemical Structure

Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C 18 H 34 ClN 2 O 8 PS). The structural formula for clindamycin is represented below: Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C 14 H 10 O 4 ). It has the following structural formula: Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, potassium hydroxide, propylene glycol, and purified water. Chemical Structure Chemical Structure

Clindamycin Phosphate and Benzoyl Peroxide Gel is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below: Clindamycin phosphate: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below: Benzoyl peroxide: Molecular Formula: C 14 H 10 O 4 Molecular Weight: 242.23 Clindamycin Phosphate and Benzoyl Peroxide Gel contains the following inactive ingredients: carbomer homopolymer type C, poloxamer 124, potassium hydroxide, propylene glycol, and purified water. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide. Chemical Structure Chemical Structure

Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C 18 H 34 ClN 2 O 8 PS). The structural formula for clindamycin is represented below: Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C 14 H 10 O 4 ). It has the following structural formula: Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, potassium hydroxide, propylene glycol, and purified water. Chemical Structure Chemical Structure

Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C 18 H 34 ClN 2 O 8 PS). The structural formula for clindamycin is represented below: Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C 14 H 10 O 4 ). It has the following structural formula: Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, potassium hydroxide, propylene glycol, and purified water. Chemical Structure Chemical Structure

Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C 18 H 34 ClN 2 O 8 PS). The structural formula for clindamycin is represented below: Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C 14 H 10 O 4 ). It has the following structural formula: Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, potassium hydroxide, propylene glycol, and purified water. Chemical Structure Chemical Structure

Clindamycin phosphate and benzoyl peroxide gel, 1.2%/5% is a fixed combination product with two active ingredients in a white to slightly yellow, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C 18 H 34 ClN 2 O 8 PS. The structural formula for clindamycin phosphate is represented below: Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C 14 H 10 O 4 . It has the following structural formula: Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin phosphate and benzoyl peroxide gel, 1.2%/5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbomer homopolymer (type C), dimethicone, disodium lauryl sulfosuccinate, edetate disodium, glycerin, methylparaben, poloxamer 182, purified water, silicon dioxide, and sodium hydroxide. Chemical Structure Chemical Structure

Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/2.5% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo- α -D-galacto-octopyranoside 2 -(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below: Clindamycin phosphate: Molecular Formula: C 18 H 34 ClN 2 O 8 PS Molecular Weight: 504.97 Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below: Benzoyl peroxide: Molecular Formula: C 14 H 10 O 4 Molecular Weight: 242.23 Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: carbomer homopolymer type C, poloxamer 124, potassium hydroxide, propylene glycol, and purified water. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 1.2% of clindamycin phosphate which is equivalent to 1% clindamycin. Chemical Structure Chemical Structure

Clobetasol propionate lotion, 0.05% contains clobetasol propionate, a synthetic fluorinated corticosteroid, for topical use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Clobetasol propionate is 21-chloro- 9-fluoro-11β, 17-dihydroxy-16β -methylpregna-1,4-diene-3,20-dione 17-propionate, with the empirical formula C 25 H 32 ClFO 5 , and a molecular weight of 466.98 (CAS Registry Number 25122-46-7). The following is the chemical structure: Clobetasol propionate is a white to almost white crystalline powder that is insoluble in water. Each gram of clobetasol propionate lotion, 0.05% contains 0.5 mg of clobetasol propionate, in a white lotion composed of carbomer homopolymer type B, dimethicone, isopropyl myristate, mineral oil, PEG-20 methyl glucose sesquistearate, propylene glycol, purified water, sodium hydroxide and white wax. Chemical Structure

Clobetasol Propionate Cream USP, 0.05% (Emollient) contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4-diene-3,20-dione, and it has the following structural formula: Clobetasol propionate has the molecular formula C 25 H 32 ClFO 5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Each gram of Clobetasol Propionate Cream USP, 0.05% (Emollient) contains 0.5 mg of clobetasol propionate in a white to off-white cream base consisting of cetomacrogol 1000, cetostearyl alcohol, citric acid, dimethicone 350, imidurea, isopropyl myristate, propylene glycol, purified water and sodium citrate. Chemical Structure

Clobetasol Propionate Shampoo, 0.05%, contains clobetasol propionate, a synthetic fluorinated corticosteroid, for topical use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. The chemical name of clobetasol propionate is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1, 4-diene-3, 20-dione 17-propionate. It has the following structural formula: Clobetasol propionate has a molecular weight of 466.97 (CAS Registry Number 25122-46-7). The molecular formula is C 25 H 32 CIFO 5 . Clobetasol propionate is a white to practically white crystalline, odorless powder insoluble in water. Each gram of Clobetasol Propionate Shampoo, 0.05%, contains 0.5 mg of clobetasol propionate in a translucent, colorless to pale yellow viscous liquid shampoo base consisting of alcohol (95% v/v), citric acid monohydrate, coco-betaine, polyquaternium-10, purified water, sodium citrate dihydrate, and sodium laureth-2 sulfate. Chemical Structure

Clobetasol Propionate Topical Spray, 0.05% contains clobetasol propionate, a synthetic fluorinated corticosteroid, for topical use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Clobetasol propionate is 21-chloro-9-fluoro-11β, 17-dihydroxy-16β -methylpregna-1,4-diene-3,20-dione 17-propionate, with the empirical formula C 25 H 32 ClFO 5 , and a molecular weight of 466.97 (CAS Registry Number 25122-46-7). The following is the chemical structure: Clobetasol propionate is a white to almost white crystalline powder that is practically insoluble in water. Each gram of Clobetasol Propionate Topical Spray, 0.05% contains 0.5 mg of clobetasol propionate, in a clear, colorless liquid composed of alcohol, isopropyl myristate, sodium lauryl sulfate, and undecylenic acid. Chemical Structure

Clobetasol Propionate Topical Solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1,4-diene-3,20-dione and it has the following structural formula: Clobetasol propionate has the molecular formula C 25 H 32 ClFO 5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate topical solution contains clobetasol propionate 0.5 mg/g in a base composed of carbomer 934P, isopropyl alcohol (39.3%), purified water, and sodium hydroxide. Chemical Structure

Clomipramine hydrochloride capsules USP is an antiobsessional drug that belongs to the class (dibenzazepine) of pharmacologic agents known as tricyclic antidepressants. Clomipramine hydrochloride is available as capsules of 25, 50 and 75 mg for oral administration. Clomipramine hydrochloride USP is 3-chloro-5-[3-(dimethylamino)propyl]-10,11-dihydro-5 H -dibenz[ b,f ] azepine monohydrochloride, and its structural formula is: C 19 H 23 ClN 2 ∙ HCl Molecular weight: 351.31 Clomipramine hydrochloride USP is a white to off-white crystalline powder. It is freely soluble in water, in methanol, and in methylene chloride, and insoluble in ethyl ether and in hexane. Inactive Ingredients: black iron oxide (25 mg capsules only), colloidal silicon dioxide, D&C yellow No. 10 (25 mg capsules only), FD&C blue No. 2 (25 mg capsules only), FD&C red No. 3 (25 mg capsules only), gelatin, magnesium stearate, pregelatinized maize starch, titanium dioxide, yellow iron oxide (50 mg capsules only). Chemical Structure

Uses cures most athlete's foot (tinea pedis), jock itch (tinea cruris), and ringworm (tinea corporis) effectively relieves itching cracking burning discomfort which can accompany these conditions

Uses treats vaginal yeast infections relieves external itching and irritation due to a vaginal yeast infection

Clotrimazole Cream USP, 1% contains clotrimazole, a synthetic antifungal agent having the chemical name {1-(o-Chloro-α, α-diphenylbenzyl)imidazole}; the molecular formula C 22 H 17 ClN 2 ; a molecular weight of 344.84; and the structural formula: Clotrimazole is an odorless, white crystalline substance. It is practically insoluble in water, sparingly soluble in ether and very soluble in polyethylene glycol 400, ethanol and chloroform. Each gram of clotrimazole cream USP contains 10 mg clotrimazole, dispersed in a vanishing cream base of cetostearyl alcohol, cetyl esters wax, 2-octyldodecanol, polysorbate 60, purified water, sorbitan monostearate, and benzyl alcohol (1%) as preservative. Chemical Structure

Uses cures most athlete's foot (tinea pedis), jock itch (tinea cruris), and ringworm (tinea corporis) for effective relief of itching scaling cracking burning redness soreness irritation discomfort

CLOTRIMAZOLE TOPICAL SOLUTION USP, 1% contains 10 mg clotrimazole USP, a synthetic antifungal agent having the chemical name 1-(o-Chloro-α,α-diphenylbenzyl) imidazole with the following structural formula: MOLECULAR FORMULA C 22 H 17 CIN 2 MOLECULAR WEIGHT 344.85 Clotrimazole is an odorless, white crystalline substance. It is practically insoluble in water, sparingly soluble in ether and very soluble in polyethylene glycol 400, ethanol, and chloroform. Each mL of CLOTRIMAZOLE TOPICAL SOLUTION USP, 1% contains 10 mg clotrimazole USP in a nonaqueous vehicle of polyethylene glycol 400. Chemical Structure

Use treats vaginal yeast infections relieves external itching and irritation due to a vaginal yeast infection

Clotrimazole and Betamethasone Dipropionate Lotion contains combinations of clotrimazole, a synthetic antifungal agent, and betamethasone dipropionate, a synthetic corticosteroid, for dermatologic use. Chemically, clotrimazole is 1-( o -chloro-α,α-diphenylbenzyl) imidazole, with the empirical formula C 22 H 17 CIN 2 , a molecular weight of 344.84, and the following structural formula: Clotrimazole is an odorless, white crystalline powder, insoluble in water and soluble in ethanol. Betamethasone dipropionate has the chemical name 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C 28 H 37 FO 7 , a molecular weight of 504.59, and the following structural formula: Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of clotrimazole and betamethasone dipropionate lotion contains 10 mg clotrimazole, USP and 0.64 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone), in a hydrophilic base of ceteareth-30, cetyl alcohol, mineral oil, phosphoric acid, propylene glycol, purified water, sodium phosphate monobasic, stearyl alcohol, white petrolatum; benzyl alcohol as preservative. Clotrimazole and betamethasone dipropionate lotion is opaque and white in color. Chemical Structure Chemical Structure

Dalfampridine, USP is a potassium channel blocker, available in 10 mg tablet strength. Each tablet contains 10 mg dalfampridine, formulated as an extended-release tablet for twice-daily oral administration. Dalfampridine is also known by its chemical name, 4-aminopyridine, with the following structure: Dalfampridine extended-release tablets are available in 10 mg strength and are white to off-white, round, biconvex, beveled edged, film-coated tablets imprinted with “429” in black ink on one side and plain on the other side, containing 10 mg of dalfampridine. Inactive ingredients consist of hypromellose, povidone, microcrystalline cellulose and magnesium stearate. The film-coating contains hypromellose, talc, ethyl cellulose, triacetin and titanium dioxide. The imprinting ink contains shellac glaze, iron oxide black, n-butyl alcohol, propylene glycol and ammonium hydroxide. Dalfampridine, USP is a white to off-white crystalline powder with a molecular weight of 94.1, CAS 504-24-5, and a molecular formula of C 5 H 6 N 2 . At ambient conditions, dalfampridine is soluble in water, methanol, acetone, tetrahydrofuran, isopropanol, acetonitrile, N, N-dimethylformamide, dimethylsulfoxide, and ethanol. spl-dalfampridine-structure

Dapsone gel, 5%, contains dapsone, USP a sulfone, in an aqueous gel base for topical dermatologic use. Dapsone gel, 5% is a gritty translucent material with visible drug substance particles. Chemically, dapsone has an empirical formula of C 12 H 12 N 2 O 2 S. It is a white, odorless crystalline powder that has a molecular weight of 248. Dapsone's chemical name is 4,4'-diaminodiphenylsulfone and its structural formula is: Each gram of dapsone gel, 5%, contains 50 mg of dapsone, USP, in a gel of carbomer homopolymer type C, diethylene glycol monoethyl ether, methylparaben, purified water and sodium hydroxide. Chemical Structure

Dapsone gel, 7.5%, contains dapsone, a sulfone, in an aqueous gel base for topical dermatologic use. Dapsone gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone has an empirical formula of C 12 H 12 N 2 O 2 S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone's chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is: Each gram of dapsone gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of carbomer homopolymer type C, diethylene glycol monoethyl ether, light mineral oil, methylparaben, polysorbate 80, purified water, sodium hydroxide, and sorbitan monooleate. Chemical Structure

Decitabine is a nucleoside metabolic inhibitor. Decitabine is a fine, white to almost white powder with the molecular formula of C 8 H 12 N 4 O 4 and a molecular weight of 228.21. Its chemical name is 4-amino-1-(2-deoxy-β-D-erythro-pentofuranosyl)-1,3,5-triazin­-2(1 H )-one and it has the following structural formula: Decitabine is slightly soluble in ethanol/water (50/50), methanol/water (50/50) and methanol; sparingly soluble in water and soluble in dimethylsulfoxide (DMSO). DRUG PRODUCT White to off white lyophilized powder in 20 mL colorless tubular glass single-dose vial with grey bromo butyl rubber stopper and sealed with baby blue flip top aluminum seal. Each vial contains 50 mg decitabine. DILUENT Clear colorless solution filled in 10 mL colorless tubular glass vial with grey bromo butyl stopper sealed with transparent flip top aluminum seal. Each vial contains 68 mg monobasic potassium phosphate, 11.6 mg sodium hydroxide and 10 mL water for injection. decitabine-structure

Deferasirox is an iron chelating agent. Deferasirox tablets for oral suspension contain 125 mg, 250 mg, or 500 mg deferasirox. Deferasirox is designated chemically as 4-[3,5-Bis(2-hydroxyphenyl)-1 H -1,2,4-triazol-1-yl]-benzoic acid and its structural formula is: Deferasirox is a white to slightly yellow powder. Its molecular formula is C 21 H 15 N 3 O 4 and its molecular weight is 373.4 g/mol. Inactive Ingredients: colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. spl-deferasirox-chemical-structure

Deferasirox is an iron-chelating agent provided as a tablet for oral use. Deferasirox is designated chemically as 4-[3,5-bis(2-hydroxyphenyl)-1H-1,2,4-triazol-1-yl]benzoic acid and has the following structural formula: Deferasirox is a white to slightly yellow powder. It has a molecular formula C 21 H 15 N 3 O 4 and molecular weight of 373.4 g/mol. It is insoluble in water with a pH of suspension of 4.1. Deferasirox tablets contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, poloxamer and povidone. The film coating contains hypromellose, FD&C Blue No. 2, polyethylene glycol, talc and titanium dioxide. Structure

Deferiprone Tablets contain 1,000 mg or 500 mg deferiprone (3-hydroxy-1,2-dimethylpyridin-4-one), a synthetic, orally active, iron-chelating agent. The molecular formula for deferiprone is C 7 H 9 NO 2 and its molecular weight is 139.15 g/mol. Deferiprone has the following structural formula: Deferiprone is a white to pinkish-white powder. It is sparingly soluble in deionized water (14.3 mg/mL) and has a melting point range of 272°C to 278°C. Chemical Structure Deferiprone Tablets (three times a day), 1,000 mg White, film-coated, oval shaped tablets; imprinted with "T" score "1 K" on one side and plain on the other. The tablets can be broken in half along the score line. Each tablet contains 1,000 mg deferiprone and the following inactive ingredients: Tablet core - crospovidone, magnesium stearate and methylcellulose; Coating - copovidone, hypromellose, medium chain triglycerides, polydextrose, polyethylene glycol and titanium dioxide. Deferiprone Tablets 500 mg White to pinkish-white, capsule-shaped tablets; scored on one side, engraved "T" on the left of the score line and "5" on the right and plain on the other side. The tablets can be broken in half along the score line. Each tablet contains 500 mg deferiprone and the following inactive ingredients: Tablet core - colloidal silicon dioxide, magnesium stearate, and microcrystalline cellulose.

The active ingredient in deflazacort tablets is deflazacort (a corticosteroid). Corticosteroids are adrenocortical steroids, both naturally occurring and synthetic. The molecular formula for deflazacort is C 25 H 31 NO 6 . The chemical name for deflazacort is 16α,17-isoxazole-11β,21-dihydroxypregna-1,4-diene-3,20-dione 21acetate, and the structure is: Deflazacort is a white or almost white crystalline powder and has a molecular weight of 441.52. Deflazacort is soluble in dichloromethane and chloroform, slightly soluble in ethanol and ethyl acetate, almost insoluble in water. Deflazacort tablets for oral administration are available as an immediate-release tablet in strengths of 6, 18, 30 and 36 mg. Each tablet contains deflazacort and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch (maize). defla-structure

The active ingredient in deflazacort oral suspension is deflazacort (a corticosteroid). Corticosteroids are adrenocortical steroids, both naturally occurring and synthetic. The molecular formula for deflazacort is C 25 H 31 NO 6 . The chemical name for deflazacort is (11β,16β)-21-(acetyloxy)11-hydroxy-2'-methyl-5'H-pregna-1,4-dieno[17,16-d]oxazole-3,20-dione, and the structure is: Deflazacort is a white or almost white crystalline powder and has a molecular weight of 441.52. Deflazacort is soluble in dichloromethane and chloroform, slightly soluble in ethanol and ethyl acetate, almost insoluble in water. Deflazacort oral suspension for oral administration is available as an immediate-release oral suspension in a strength of 22.75 mg/mL. The oral suspension contains deflazacort and the following inactive ingredients: benzyl alcohol, glacial acetic acid, magnesium aluminum silicate, noncrystallizing sorbitol solution, polysorbate 80, purified water, sodium carboxymethylcellulose, and sodium hydroxide. Tris Chemdraw Structure

Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows: Mol. Wt. 1129.27 Molecular Formula: C 46 H 64 N 14 O 12 S 2 CH 3 COOH 1-(3-mercaptopropanoic acid)-8-D-arginine-vasopressin monoacetate. Desmopressin acetate injection, USP is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH. chem

Desmopressin acetate injection, USP 4 mcg/mL is a synthetic analogue of the natural pituitary hormone 8-arginine vasopressin (ADH), an antidiuretic hormone affecting renal water conservation. It is chemically defined as follows: Mol. Wt. 1069.23 Molecular Formula: C 46 H 64 N 14 O 12 S 2 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin acetate. Desmopressin acetate Injection, USP 4 mcg/mL is provided as a sterile, aqueous solution for injection. Each mL provides: Desmopressin acetate, USP, 4 mcg Sodium chloride, 9 mg Hydrochloric acid to adjust pH to 4 Water for injection, q.s. to 1 mL The 10 mL vial contains chlorobutanol as a preservative (5 mg/mL). structure

Desonide Cream, 0.05% and Desonide Ointment, 0.05% contain desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α-)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in Desonide Cream, 0.05% and Desonide Ointment, 0.05%, is C 24 H 32 O 6 . It has the following structural formula: The molecular weight of desonide is 416.51. It is a white to off-white odorless powder which is soluble in methanol and practically insoluble in water. Each gram of Desonide Cream, 0.05% contains 0.5 milligram of desonide in a compatible vehicle buffered to the pH range of normal skin. It contains aluminum acetate basic, cetearyl alcohol/sodium lauryl sulfate/sodium cetearyl sulfate, glycerin, mineral oil, purified water, white petrolatum and white wax. It is preserved with methylparaben. Each gram of Desonide Ointment, 0.05% contains 0.5 milligram of desonide in an ointment base consisting of mineral oil and white petrolatum. It is a smooth, uniform petrolatum-type ointment. Chemical Structure

Desoximetasone ointment USP, 0.05% contains the active synthetic corticosteroid desoximetasone. The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Each gram of desoximetasone ointment USP, 0.05% contains 0.5 mg of desoximetasone in an ointment base consisting of mineral oil and white petrolatum. The chemical name of desoximetasone is Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-,(11β,16α)-. Desoximetasone has the molecular formula C 22 H 29 FO 4 and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is: Chemical Structure

Desoximetasone Topical Spray, 0.25% contains desoximetasone as the active ingredient. Desoximetasone is a corticosteroid with the chemical name of pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-, (11β,16α)-. Desoximetasone has the molecular formula of C 22 H 29 FO 4 and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is: Each gram of Desoximetasone Topical Spray contains 2.5 mg of desoximetasone in a clear, colorless liquid with the following inactive ingredients: glyceryl oleate, isopropyl alcohol (23.4%), isopropyl myristate, L-menthol, and mineral oil. Desoximetasone Topical Spray is co-packaged with a manual spray pump for installation by the pharmacist prior to dispensing to patients. Chemical Structure

Desoximetasone ointment USP, 0.25% contains the active synthetic corticosteroid desoximetasone. The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Each gram of desoximetasone ointment USP, 0.25% contains 2.5 mg of desoximetasone in an ointment base consisting of fractionated coconut oil and white petrolatum. The chemical name of desoximetasone is Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-,(11β,16α)-. Desoximetasone has the molecular formula C 22 H 29 FO 4 and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is: Chemical Structure

Desoximetasone cream USP, 0.05%, desoximetasone cream USP, 0.25%, and desoximetasone gel USP, 0.05% contain the active synthetic corticosteroid desoximetasone. The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Each gram of desoximetasone cream USP, 0.05% contains 0.5 mg of desoximetasone in an emollient cream base consisting of cetostearyl alcohol, edetate disodium, isopropyl myristate, lanolin alcohol, mineral oil, purified water, and white petrolatum. Each gram of desoximetasone cream USP, 0.25% contains 2.5 mg of desoximetasone in an emollient cream base consisting of cetostearyl alcohol, isopropyl myristate, lanolin alcohol, mineral oil, purified water, and white petrolatum. Each gram of desoximetasone gel USP, 0.05% contains 0.5 mg of desoximetasone in a gel base consisting of carbomer 940, docusate sodium, edetate disodium, isopropyl myristate, purified water, SDAG-3 95% alcohol, and trolamine. The chemical name of desoximetasone is Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16-methyl-,(11ß,16α)-. Desoximetasone has the molecular formula C 22 H 29 FO 4 and a molecular weight of 376.47. The CAS Registry Number is 382-67-2. The structural formula is: Chemical Structure

Desvenlafaxine extended-release tablets for oral administration contains desvenlafaxine, USP, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine), USP is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine, USP is designated RS -4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the empirical formula of C 16 H 25 NO 2 . Desvenlafaxine, USP has a molecular weight of 263.38. The structural formula is shown below. * Chiral Centre Desvenlafaxine, USP is a white to off-white crystalline powder that is sparingly soluble in dimethyl sulfoxide. The solubility of desvenlafaxine is pH dependent. Desvenlafaxine, USP is formulated as an extended-release tablet for once-a-day oral administration. Each 50 mg or 100 mg extended-release tablet contains 50 or 100 mg of desvenlafaxine, USP, respectively. Inactive ingredients for the 50 mg tablet consist of alginic acid, citric acid monohydrate powder, hypromellose, microcrystalline cellulose, povidone, talc, magnesium stearate and film coating, which consist of hypromellose, titanium dioxide, polyethylene glycol, talc, and iron oxide red. Inactive ingredients for the 100 mg tablet consist of alginic acid, citric acid monohydrate powder, hypromellose, microcrystalline cellulose, povidone, talc, magnesium stearate and film coating, which consist of hypromellose, titanium dioxide, polyethylene glycol, iron oxide red, and iron oxide black. Structure