sodium chloride - Medications

Runny Nose Due To Allergies, Worse In Morning*

USE: Condition listed above or as directed by a physician.

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Use: Support for feelings of grief. Temporary relief of fatigue and sinus inflammations. May also be used for standard homeopathic indications or as directed by your physician.

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Runny Nose Due To Allergies, Worse In Morning*

Summary not available yet.

Use: Support for feelings of grief. Temporary relief of fatigue and sinus inflammations. May also be used for standard homeopathic indications or as directed by your physician.

Runny Nose Due To Allergies, Worse In Morning*

USE Condition listed above or as directed by a physician.

USES: SYMPTOMS ASSOCIATED WITH GENERAL COLDS** **C, K, CK & X are homeopathic dilutions

INDICATIONS Use according to standard homeopathic indications for self-limiting conditions. Common Materia Medica indications: sneezing, colds, exhaustion, hay fever, headache, weakness.*

Uses* According to homeopathic indications these ingredients provide temporary relief from eye floaters after serious causes have been ruled out by a physician. *These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

Take 2 grams twice a day, once a day

Take 2 to 3 drops of pipette (about 0.8 to 1.2 ml) twice a day and once.

Spray three times a day, five times a time to the affected area.

INDICATIONS: Uses* • According to homeopathic indications, these ingredients provide temporary relief from symptoms of cold and flu such as: • Fever / chills • Runny nose. *These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

INDICATIONS: Uses* • According to homeopathic indications, these ingredients provide temporary relief from symptoms of cough and congestion.. *These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.

For moistening of the nasal, throat and lungs

Uses for the preparation of normal isotonic solution of Sodium chloride as an electrolyte replenisher for the prevention of heat cramps due to excessive perspiration any alternative use as directed by a physician

Uses for the preparation of normal isotonic solution of Sodium chloride as an electrolyte replenisher for the prevention of heat cramps due to excessive perspiration any alternative use as directed by a physician

Normosol-M and 5% Dextrose Injection (Multiple Electrolytes and 5% Dextrose Injection Type 1, USP) is a sterile, nonpyrogenic, hypertonic solution of balanced maintenance electrolytes and 5% dextrose injection in water for injection. The solution is administered by intravenous infusion for parenteral maintenance of routine daily fluid and electrolyte requirements with minimal carbohydrate calories. Each 100 mL contains dextrose, hydrous 5 g, sodium chloride, 234 mg, potassium acetate, 128 mg and magnesium acetate, anhydrous 21 mg. May contain hydrochloric acid for pH adjustment. The electrolyte content (not including hydrochloric acid) and other characteristics are as follows: Sodium (Na + ) 40 mEq/liter Potassium (K + ) 13 mEq/liter Magnesium (Mg ++ ) 3 mEq/liter Chloride (Cl − ) 40 mEq/liter Bicarbonate (HCO 3 − ) as acetate 16 mEq/liter Caloric value (dextrose) 170 Calories/liter Tonicity Hypertonic Osmolarity 363 mOsmol/liter (calc.) pH (range) 5.0 (4.0 to 6.5) The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-M and 5% Dextrose Injection is a parenteral fluid, electrolyte and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. It has the following structural formula: Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Acetate, USP is chemically designated CH 3 COOK, colorless crystals or white crystalline powder very soluble in water. Magnesium acetate is chemically designated Mg (C 2 H 3 O 2 ) 2 , colorless or white crystals very soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. structural formula dextrose

Normosol ® -R pH 7.4 is a sterile, nonpyrogenic, isotonic solution of balanced electrolytes in water for injection. The solution is administered by intravenous infusion for parenteral replacement of acute losses of extracellular fluid. Each 100 mL of Normosol-R pH 7.4 contains sodium chloride, 526 mg; sodium acetate, 222 mg; sodium gluconate, 502 mg; potassium chloride, 37 mg; magnesium chloride, hexahydrate 30 mg. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH range 6.5 to 7.6; 295 mOsmol/liter (calc.). Electrolytes per 1000 mL (not including pH adjustment): Sodium 140 mEq; potassium 5 mEq; magnesium 3 mEq; chloride 98 mEq; acetate 27 mEq; gluconate 23 mEq. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-R pH 7.4 is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride, hexahydrate (MgCl 2 • 6H 2 O) deliquescent crystals very soluble in water. Sodium Acetate, USP is chemically designated sodium acetate, anhydrous (C 2 H 3 NaO 2 ), a hygroscopic powder soluble in water. It has the following structural formula: Sodium gluconate is chemically designated C 6 H 11 NaO 7 , the normal sodium salt of gluconic acid soluble in water. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. structural formula sodium acetate structural formula sodium gluconate

Normosol-R is a sterile, nonpyrogenic isotonic solution of balanced electrolytes in water for injection. The solution is administered by intravenous infusion for parenteral replacement of acute losses of extracellular fluid. Each 100 mL of Normosol-R contains sodium chloride, 526 mg; sodium acetate, 222 mg; sodium gluconate, 502 mg; potassium chloride, 37 mg; magnesium chloride hexahydrate, 30 mg. May contain HCl and/or NaOH for pH adjustment. pH 6.6 (4.0 to 8.0); 294 mOsmol/liter (calc.). Electrolytes per 1000 mL (not including pH adjustment): Sodium 140 mEq; potassium 5 mEq; magnesium 3 mEq; chloride 98 mEq; acetate 27 mEq; gluconate 23 mEq. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-R is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride hexahydrate (MgCl 2 • 6H 2 O) deliquescent crystals very soluble in water. Sodium Acetate, USP, is chemically designated sodium acetate anhydrous (C 2 H 3 NaO 2 ), a hygroscopic powder soluble in water. It has the following structural formula: Sodium gluconate is chemically designated C 6 H 11 NaO 7 , the normal sodium salt of gluconic acid soluble in water. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. structural formula sodium acetate usp structural formula sodium glucontae

Normosol-R and 5% Dextrose Injection is a sterile, nonpyrogenic solution of balanced electrolytes (with dextrose) in water for injection. The solution is administered by intravenous infusion for parenteral replacement of acute losses of extracellular fluid (with minimal carbohydrate calories). Each 100 mL of Normosol-R and 5% Dextrose Injection contains dextrose 5 g; sodium chloride 526 mg; sodium acetate, anhydrous 222 mg; sodium gluconate 502 mg; potassium chloride 37 mg; magnesium chloride, hexahydrate 30 mg; pH adjusted with hydrochloric acid. See TABLE for summary of electrolyte content, caloric value and characteristics of this solution. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. Normosol-R and 5% Dextrose Injection is a parenteral fluid, electrolyte and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C 6 H 12 O 6 • H 2 0), a hexose sugar freely soluble in water. It has the following structural formula: Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride hexahydrate (MgCl 2 • 6H 2 O) deliquescent crystals very soluble in water. Sodium Acetate, USP, is chemically designated sodium acetate anhydrous (C 2 H 3 NaO 2 ), a hygroscopic powder soluble in water. It has the following structural formula: Sodium gluconate is chemically designated C 6 H 11 NaO 7 , the normal sodium salt of gluconic acid soluble in water. It has the following structural formula: Water for Injection, USP is chemically designated H 2 0. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. structural formula dextrose USP structural formula sodium acetate usp structural formula sodium gluconate

INDICATIONS For the temporary relief of runny nose, sneezing, itching of the nose or throat, and itchy, watery eyes due to sensitivity to common allergens of the northwestern United States.*

Contraindicaciones: Ninguna reportada

Uses - Relieves dryness and irritation of the eye - Provides temporary relief from discomfort due to minor eye irritations or exposure to wind or sun - Helps protect against further eye irritation

OP-P For the temporary relief of general anxiety, sleeplessness, depression, muscle and joint pain and digestive discomfort

INDICATIONS For the temporary relief of runny nose, sneezing, itching of the nose or throat, and itchy or watery eyes due to sensitivity to inhalant allergens.*

USES: • For the temporary relief of symptoms including: • muscle cramps • inflammation • joint pain These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

INDICATIONS & USAGE SECTION Formulated for symptoms such as bloating, fatigue, itching, nausea, teeth grinding, increased appetite, cramping, sluggish elimination and other related symptoms.

INDICATIONS & USAGE SECTION Formulated for symptoms such as bloating, fatigue, itching, nausea, teeth grinding, increased appetite, cramping and sluggish elimination.

INDICATIONS & USAGE SECTION Formulated for symptoms such as bloating, fatigue, itching, nausea, teeth grinding, increased appetite, cramping and sluggish elimination.

USES Temporarily relieves symptoms caused by pinworm infestation. Claims based on traditional homeopathic practice, not accepted medical evidence. Not Food and Drug Administration evaluated.

PEG-3350 and Electrolytes for Oral Solution is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white powder. Polyethylene Glycol 3350, USP Sodium Sulfate, USP The chemical name is Na 2 SO 4 . The average Molecular Weight is 142.04. The structural formula is: Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na + Cl - Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl PEG Chemical Structure Na2SO4 Chemical Structure NaHCO3 Chemical Structure

PEG-3350 and Electrolytes for Oral Solution is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white powder. Polyethylene Glycol 3350, USP Sodium Sulfate, USP The chemical name is Na 2 SO 4 . The average Molecular Weight is 142.04. The structural formula is: Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na + Cl - Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl PEG Chemical Structure Na2SO4 Chemical Structure NaHCO3 Chemical Structure

For oral solution: Each 4 liter (4L) PEG-3350, sodium chloride, sodium bicarbonate and potassium chloride for oral solution jug contains a white powder for reconstitution. PEG-3350, sodium chloride, sodium bicarbonate and potassium chloride for oral solution is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 420 g, sodium bicarbonate 5.72 g, sodium chloride 11.2 g, potassium chloride 1.4 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, USP Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na + Cl - Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl PEG-3350 Structural Formula Sodium Bicarb Structural Formula

Physiolyte is a sterile, nonpyrogenic solution of electrolytes in water for injection intended only for sterile irrigation, washing, and rinsing purposes. Each 100 mL contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 g Sodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 g; Magnesium Chloride Hexahydrate USP 0.03 g Water for Injection USP qs Glacial Acetic Acid USP has been added to adjust the pH pH: 6.8 (6.3–7.3) Calculated Osmolarity: The solution is isotonic (295 mOsmol/liter) Concentration of Electrolytes (mEq/liter): Sodium 140 Potassium 5; Magnesium 3; Chloride 98; Acetate (CH 3 COO − ) 27 Gluconate (HOCH 2 (CHOH) 4 COO − ) 23 It contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Physiolyte may be classified as a sterile irrigant, wash, rinse and pharmaceutical vehicle. The formulas of the active ingredients are: Ingredients Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44 Sodium Acetate Trihydrate USP CH 3 COONa•3H 2 O 136.08 Potassium Chloride USP KCl 74.55 Magnesium Chloride Hexahydrate USP MgCl 2 •6H 2 O 203.30 Sodium Gluconate USP 218.14 The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. Not made with natural rubber latex, PVC or DEHP. Chemical Structure

USES: Provides potentized homeo-nutritional support for the pituitary, pineal and hypothalamus.† †Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

INDICATIONS For the temporary relief of poor appetite, nausea or vomiting, weakness or fatigue, dizziness, body aches, decreased libido, irregular menses, hot flashes, mood changes or swings, dry skin, constipation, memory loss, sleep disturbance, or occasional headaches.*

Summary not available yet.

PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) is a sterile, nonpyrogenic isotonic solution in a single dose container for intravenous administration. Each 100 mL contains 526 mg of Sodium Chloride, USP (NaCl); 502 mg of Sodium Gluconate (C 6 H 11 NaO 7 ); 368 mg of Sodium Acetate Trihydrate, USP (C 2 H 3 NaO 2 •3H 2 O); 37 mg of Potassium Chloride, USP (KCl); and 30 mg of Magnesium Chloride, USP (MgCl 2 •6H 2 O). It contains no antimicrobial agents. The pH is adjusted with sodium hydroxide. The pH is 7.4 (6.5 to 8.0). PLASMA-LYTE A Injection pH 7.4 (Multiple Electrolytes Injection, Type 1, USP) administered intravenously has value as a source of water, electrolytes, and calories. One liter has an ionic concentration of 140 mEq sodium, 5 mEq potassium, 3 mEq magnesium, 98 mEq chloride, 27 mEq acetate, and 23 mEq gluconate. The osmolarity is 294 mOsmol/L (calc). Normal physiologic osmolarity range is 280 to 310 mOsmol/L. The caloric content is 21 kcal/L. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.

Summary not available yet.

Plegisol (Cardioplegic Solution) is a sterile, nonpyrogenic, essentially isotonic, formulation of electrolytes in water for injection. It is a "core solution" intended for use only after addition of sodium bicarbonate to adjust pH prior to administration. After buffering with sodium bicarbonate it is suitable for cardiac instillation (usually with hypothermia) to induce arrest during open heart surgery. Other agents may be added to the solution prior to instillation (See INSTRUCTIONS FOR USE ). Each 100 mL of solution contains calcium chloride, dihydrate 17.6 mg, magnesium chloride, hexahydrate 325.3 mg, potassium chloride 119.3 mg and sodium chloride 643 mg in water for injection. May contain HCl or NaOH for pH adjustment. Electrolyte content per liter (not including ions for pH adjustment): Calcium (Ca ++ ) 2.4 mEq; magnesium (Mg ++ ) 32 mEq; potassium (K + ) 16 mEq; sodium (Na + ) 110 mEq; chloride (Cl‾) 160 mEq. Osmolar concentration, 304 mOsmol/liter (calc.); pH 3.8 (3.5 to 3.9) prior to sodium bicarbonate addition. It is required that 10 mL (840 mg) of 8.4% Sodium Bicarbonate Injection, USP (10 mEq each of sodium and bicarbonate) be added aseptically and thoroughly mixed with each 1000 mL of cardioplegic solution to adjust pH. Use 10 mL of Hospira List 4900, 8.4% Sodium Bicarbonate Injection, USP, to achieve the approximate pH of 7.8 when measured at room temperature. Use of any other Sodium Bicarbonate Injection may not achieve this pH due to the varying pH's of Sodium Bicarbonate Injections. Due to its inherent instability with other components, sodium bicarbonate must be added just prior to administration. After this addition, the solution must be stored under refrigeration and be used within 24 hours. The buffered admixture contains the following electrolytes (per liter): Ca ++ 2.4 mEq, Mg ++ 32 mEq, K + 16 mEq, Na + 120 mEq, Cl‾ 160 mEq and bicarbonate (HCO 3 ‾) 10 mEq; osmolar concentration, 324 mOsmol/liter (calc.); pH 7.8 (approx.). If other agents are added, these values may be altered. The solution contains no bacteriostat, or antimicrobial agent and is intended only for use (after adjusting pH with sodium bicarbonate) in a single operative procedure. When smaller amounts are required, the unused portion should be discarded. Plegisol with added sodium bicarbonate used as a coronary artery infusate induces cardiac arrest, combats ischemic ionic disturbances, buffers ischemic acidosis and protects energy sources for functional recovery after ischemia. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl 2 • 2 H 2 O), white fragments or granules freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride, hexahydrate (MgCl 2 • 6 H 2 O), deliquescent flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.