paroxetine hydrochloride hemihydrate - Medications
Browse 56 medications containing paroxetine hydrochloride hemihydrate. Open a product record to review formulation details, related brands, manufacturers, and label-backed information.
Paroxetine extended-release tablets USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-(3 S , 4 R )-4-(p-Fluorophenyl)-3-([(3,4 methylenedioxy) phenoxy]methyl)piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 21 ClFNO 3 •1/2H 2 O. The molecular weight is 374.83. The structural formula of paroxetine hydrochloride USP is: Paroxetine hydrochloride USP is a white or almost white, crystalline powder. Paroxetine extended-release tablets USP are intended for oral administration. Each film-coated, extended-release tablet contains paroxetine hydrochloride hemihydrate USP equivalent to paroxetine 12.5 mg, 25 mg and 37.5 mg. Inactive ingredients consist of aluminum oxide, colloidal silicon dioxide, hydrogenated vegetable oil, hypromelloses, iron oxide black, lactose monohydrate, magnesium stearate, methacrylic acid co-polymer dispersion, microcrystalline cellulose, polyethylene glycols, povidone, propylene glycol, shellac glaze, talc, titanium dioxide, triacetin and triethyl citrate. The 12.5 mg tablets also contain D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake (tartrazine) and FD&C Yellow No. 6 Aluminum Lake. The 25 mg tablets also contain D&C Red No. 30 Aluminum Lake and FD&C Blue No. 2 Aluminum Lake. The 37.5 mg tablets also contain FD&C Blue No. 1 Aluminum Lake. USP Dissolution Test is Pending. Image
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet contains paroxetine hydrochloride equivalent to paroxetine as follows: 10 mg–yellow (scored); 20 mg–pink (scored); 30 mg–blue, 40 mg–pink. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. Paroxetine Chemical Structure
Paroxetine extended-release tablets, contains paroxetine hydrochloride hemihydrate, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (3S,4R)-3-[(1,3 benzodioxol-5-yloxy)methyl]-4-(4-fluorophenyl) piperidine hydrochloride hemihydrate or Piperidine, 3-[(1,3-benzodioxol-5-yloxy)methyl]- 4-( 4-fluorophenyl)-, hydrochloride, (3S-trans)- and has the empirical formula of C 19 H 20 FNO 3 •HCl• 1 / 2 H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride hemihydrate, USP is a white to off white solid (or) powder, having a melting point range of 120°C to 142°C and soluble in methanol and in alcohol; slightly soluble in water. Paroxetine extended-release tablets are intended for oral administration. Each film-coated, extended-release tablet contains paroxetine hydrochloride USP equivalent to paroxetine 12.5 mg, 25 mg and 37.5 mg. One layer of the tablet consists of a degradable barrier layer and the other contains the active material in a hydrophilic matrix. Inactive ingredients consist of ferric oxide yellow, glyceryl behenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1) type A, polyethylene glycols, polysorbate 80, polyvinylpyrrolidone, silicon dioxide, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate, film-coating material contains - FD&C Yellow #6/sunset yellow FCF aluminum lake, FD&C blue #2/Indigo carmine AL 3% to 5% and D&C Yellow #10 aluminum lake for 12.5 mg; D&C Red #30/Helendon pink aluminum lake for 25 mg and FD&C blue #2/Indigo carmine AL 3% to 5% and FD&C blue #2 Indigo carmine aluminum lake for 37.5 mg. paroxetine-strc-spl
Paroxetine Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 HCl 1/2 H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120℃ to 138℃ and a solubility of 5.4 mg/mL in water. Tablets Paroxetine Tablets, USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg paroxetine hydrochloride, respectively. Inactive ingredients in core tablets: dibasic calcium phosphate dihydrate, hypromellose, magnesium stearate, sodium starch glycolate. Inactive ingredients in the coating of 10 mg tablets: ferric oxide red, ferric oxide yellow, ferrosoferric oxide, hypromellose, maltodextrin, medium-chain triglycerides, polydextrose, talc, titanium dioxide. Inactive ingredients in the coating of 20 mg tablets: ferric oxide red, hypromellose, polyethylene glycol, titanium dioxide. Inactive ingredients in the coating of 30 mg tablets: FD&C Blue No. 2 Aluminum Lake, hypromellose, polyethylene glycol, polysorbate 80, titanium dioxide. Inactive ingredients in the coating of 40 mg tablets: FD&C Blue No. 1 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, ferric oxide yellow, hypromellose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. Complies with USP Chromatographic Purity Test 2. image description
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet contains paroxetine hydrochloride equivalent to paroxetine as follows: 10 mg–yellow (scored); 20 mg–pink (scored); 30 mg–blue, 40 mg–pink. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. Paroxetine Chemical Structure
DESCRIPTION Paroxetine Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 ŸHClŸ1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120℃ to 138℃ and a solubility of 5.4 mg/mL in water. T ablets Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg paroxetine hydrochloride, respectively. Inactive ingredients in core tablets: dibasic calcium phosphate dihydrate, hypromellose, magnesium stearate, sodium starch glycolate. Inactive ingredients in the coating of 10 mg tablets: ferric oxide red, ferric oxide yellow, ferrosoferric oxide, hypromellose, maltodextrin, medium-chain triglycerides, polydextrose, talc, titanium dioxide. Inactive ingredients in the coating of 20 mg tablets: ferric oxide red, hypromellose, polyethylene glycol, titanium dioxide. Inactive ingredients in the coating of 30 mg tablets: FD&C Blue No. 2 Aluminum Lake, hypromellose, polyethylene glycol, polysorbate 80, titanium dioxide. Inactive ingredients in the coating of 40 mg tablets: FD&C Blue No. 1 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, ferric oxide yellow, hypromellose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. Complies with USP Chromatographic Purity Test 2. structure
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide.
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet contains paroxetine hydrochloride equivalent to paroxetine as follows: 10 mg–yellow (scored); 20 mg–pink (scored); 30 mg–blue, 40 mg–pink. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. Paroxetine Chemical Structure
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4R-(4’-fluorophenyl)-3S-[(3’,4’ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is: Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120 o C to 138 o C and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 25 mg or 37.5 mg paroxetine equivalent to 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 25 mg tablets contain D&C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP. paroxetine-str.jpg
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP are an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride hemihydrate is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120° to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Structured formula for Paroxetine
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine extended-release tablets, contains paroxetine hydrochloride hemihydrate, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (3S,4R)-3-[(1,3 benzodioxol-5-yloxy)methyl]-4-(4-fluorophenyl) piperidine hydrochloride hemihydrate or Piperidine, 3-[(1,3-benzodioxol-5-yloxy)methyl]- 4-( 4-fluorophenyl)-, hydrochloride, (3S-trans)- and has the empirical formula of C 19 H 20 FNO 3 •HCl• 1 / 2 H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride hemihydrate, USP is a white to off white solid (or) powder, having a melting point range of 120°C to 142°C and soluble in methanol and in alcohol; slightly soluble in water. Paroxetine extended-release tablets are intended for oral administration. Each film-coated, extended-release tablet contains paroxetine hydrochloride USP equivalent to paroxetine 12.5 mg, 25 mg and 37.5 mg. One layer of the tablet consists of a degradable barrier layer and the other contains the active material in a hydrophilic matrix. Inactive ingredients consist of ferric oxide yellow, glyceryl behenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1) type A, polyethylene glycols, polysorbate 80, polyvinylpyrrolidone, silicon dioxide, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate, film-coating material contains - FD&C Yellow #6/sunset yellow FCF aluminum lake, FD&C blue #2/Indigo carmine AL 3% to 5% and D&C Yellow #10 aluminum lake for 12.5 mg; D&C Red #30/Helendon pink aluminum lake for 25 mg and FD&C blue #2/Indigo carmine AL 3% to 5% and FD&C blue #2 Indigo carmine aluminum lake for 37.5 mg. paroxetine-structure.jpg
Paroxetine tablets, USP are an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride hemihydrate is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120° to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg of paroxetine. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Structured formula for Paroxetine
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3•HCl•1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: [Image] Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide.
Paroxetine Oral Suspension contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine Oral Suspension Paroxetine Oral Suspension is for oral administration. Each 5 mL contains 10 mg of paroxetine equivalent to 11.1 mg of paroxetine hydrochloride. Inactive ingredients consist of polacrilin potassium, microcrystalline cellulose, carboxymethyl cellulose sodium, propylene glycol, glycerin, sorbitol, methylparaben, propylparaben, sodium citrate dihydrate, citric acid anhydrous, sodium saccharin, orange flavor (triacetin, propylene glycol, natural and artificial flavor), FD&C Yellow No. 6, simethicone emulsion and purified water. structure
Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. CHEMICAL STRUCTURE
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide.
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide.
Paroxetine tablets, USP are an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride hemihydrate is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120° to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Structured formula for Paroxetine
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP are an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride hemihydrate is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120° to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Structured formula for Paroxetine
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Each paroxetine tablet, USP intended for oral administration contains paroxetine hydrochloride hemihydrate equivalent to 10 mg or 20 mg or 30 mg or 40 mg of paroxetine. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide.
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine extended-release tablets USP, contains paroxetine hydrochloride, USP an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4R-(4’-fluorophenyl)-3S-[(3’,4’ methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride, USP is: Paroxetine hydrochloride, USP is white or almost white crystalline powder, having a melting point range of 120 o C to 138 o C and soluble in methanol and in alcohol, slightly soluble in water. Paroxetine extended-release tablets, USP are intended for oral administration. Each extended-release tablet contains 25 mg or 37.5 mg paroxetine equivalent to 28.51 mg or 42.76 mg of paroxetine hydrochloride USP, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of colloidal silicon dioxide, glyceryl dibehenate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, povidone K-30, talc and triethyl citrate. The film-coating material contains hypromellose, polyethylene glycol 400, polyethylene glycol 6000 and titanium dioxide. Additionally, 25 mg tablets contain D&C Red No. 30 Lake and polysorbate 80 and 37.5 mg tablets contain FD&C Blue No. 2 Aluminium Lake and talc. FDA approved dissolution test specifications differ from USP. paroxetine-str.jpg
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet contains paroxetine hydrochloride equivalent to paroxetine as follows: 10 mg–yellow (scored); 20 mg–pink (scored); 30 mg–blue, 40 mg–pink. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. Paroxetine Chemical Structure
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP contains paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, white to off-white crystalline powder, having a melting point range of 120°C to 138°C. It is freely soluble in methanol, soluble in ethanol, sparingly soluble in dichloromethane and slightly soluble in water. Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose 6 cP, lactose anhydrous, magnesium stearate, polyethylene glycol 6000, povidone, sodium starch glycolate, talc, and titanium dioxide. Image
Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. CHEMICAL STRUCTURE
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water.
Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&C Red #30 Aluminum Lake. 30 mg tablet contains FD&C Blue #2 Aluminum Lake. Chemical Structure
Paroxetine hydrochloride tablets, USP are an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (3 S - trans )-3-[(1,3-Benzodioxol-5-yloxy)methyl]-4-(4-fluorophenyl)-piperidine hydrochloride hemihydrate and has the molecular formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP (hemihydrate) is an odorless, white or almost white crystalline powder, having a melting point range of 129° to 131°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet contains paroxetine hydrochloride hemihydrate equivalent to 10 mg, 20 mg, 30 mg or 40 mg paroxetine. Inactive ingredients consist of dibasic calcium phosphate dihydrate, FD&C Blue No. 1 Aluminum Lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate (potato), titanium dioxide and triacetin. Paroxetine hydrochloride complies with USP Chromatographic Purity Test 1. Paroxetine Hydrochloride Structural Formula
Paroxetine Extended-Release Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R- (4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 ∙HCl∙1/2H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Each enteric coated, extended-release tablet contains paroxetine base of 12.5 mg (white tablet), 25 mg (brown tablet), 37.5 mg (orange tablet), which is equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of carboxymethylcellulose sodium, copovidone, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1), polysorbate 80, silicon dioxide, sodium lauryl sulfate, talcum, titanium dioxide, and triethyl citrate. In addition, the 25 mg tablets also contain the following coloring agents: iron oxide black and iron oxide red and the 37.5 mg tablets contain iron oxide red and iron oxide yellow. USP dissolution test is pending.
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine Extended-Release Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R- (4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 ∙HCl∙1/2H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Each enteric coated, extended-release tablet contains paroxetine base of 12.5 mg (white tablet), 25 mg (brown tablet), 37.5 mg (orange tablet), which is equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of carboxymethylcellulose sodium, copovidone, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1), polysorbate 80, silicon dioxide, sodium lauryl sulfate, talcum, titanium dioxide, and triethyl citrate. In addition, the 25 mg tablets also contain the following coloring agents: iron oxide black and iron oxide red and the 37.5 mg tablets contain iron oxide red and iron oxide yellow. USP dissolution test is pending.
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine Extended-Release Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R- (4'-fluorophenyl)-3 S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 ∙HCl∙1/2H 2 O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Each enteric coated, extended-release tablet contains paroxetine base of 12.5 mg (white tablet), 25 mg (brown tablet), 37.5 mg (orange tablet), which is equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of carboxymethylcellulose sodium, copovidone, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1), polysorbate 80, silicon dioxide, sodium lauryl sulfate, talcum, titanium dioxide, and triethyl citrate. In addition, the 25 mg tablets also contain the following coloring agents: iron oxide black and iron oxide red and the 37.5 mg tablets contain iron oxide red and iron oxide yellow. USP dissolution test is pending.
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine tablets contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120 o to 138 o C and a solubility of 5.4 mg/mL in water. Paroxetine Tablets Paroxetine tablets are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively. Inactive ingredients consist of glyceryl behenate, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, polyethylene glycols and titanium dioxide. picture1
Paroxetine hydrochloride is an orally administered psychotropic drug. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans - 4R -(4' - fluorophenyl)- 3S -[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C 19 H 20 FNO 3 •HCl•1/2H 2 O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride, USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Structured formula for Paroxetine
About paroxetine hydrochloride hemihydrate
This collection groups medications in our database that include paroxetine hydrochloride hemihydrate. It currently includes 56 matching listings. Open a result to review formulation details, related brands, manufacturers, and product labels.
What You Can Review
Use this page to find products that share the same indexed ingredient name, then open drug detail pages for dosage, labeling, and related navigation.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.