glenmark pharmaceuticals inc., usa - Medication Listings

Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate capsules, USP are available as 15 mg and 25 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate, USP is a white to off-white powder. Topiramate, USP is freely soluble in dichloromethane. Topiramate, USP has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O -isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate capsules, USP intended for oral administration contains 15 mg or 25 mg of topiramate, USP. The inactive ingredients are cellulose acetate, gelatin, povidone, sodium lauryl sulfate, sugar spheres, talc and titanium dioxide. The imprinting ink has the following components: black iron oxide, potassium hydroxide, propylene glycol, shellac. FDA approved dissolution test specifications differ from USP. structure

Trandolapril and verapamil hydrochloride extended-release tablets combine a slow release formulation of a calcium channel blocker, verapamil hydrochloride, USP, and an immediate release formulation of an angiotensin converting enzyme inhibitor, trandolapril, USP. Verapamil Component Verapamil hydrochloride, USP is chemically described as benzeneacetonitrile, α [3-[[2-(3,4-dimethoxyphenyl) -ethyl] methylamino] propyl] -3,4-dimethoxy-α -(1-methylethyl)-, monohydrochloride, (±). Its molecular formula is C 27 H 38 N 2 O 4 • HCl and its structural formula is: Verapamil hydrochloride, USP is a white or practically white crystalline powder, with a molecular weight of 491.06 g/mol. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. It is practically odorless and has a bitter taste. verapamil-structure Trandolapril Component Trandolapril, USP is the ethyl ester prodrug of a nonsulfhydryl angiotensin converting enzyme (ACE) inhibitor, trandolaprilat. It is chemically described as (2S,3aR,7aS)- 1- [(S)-2-[[(S)-1-(EthoxyCarbonyl)-3-phenylpropyl] amino]Propanoyl]octahydro-1H-indole-2-carboxylic acid. Its molecular formula is C 24 H 34 N 2 O 5 and its structural formula is: Trandolapril, USP is a white or almost white powder with a molecular weight of 430.54 g/mol. It is practically insoluble in water; freely soluble in methylene chloride; sparingly soluble in absolute alcohol. Trandolapril and verapamil hydrochloride extended-release tablets are formulated for oral administration, containing verapamil hydrochloride, USP as a controlled release formulation and trandolapril, USP as an immediate release formulation. The tablet strengths are trandolapril and verapamil hydrochloride extended-release tablets 1 mg/240 mg, trandolapril and verapamil hydrochloride extended-release tablets 2 mg/180 mg, trandolapril and verapamil hydrochloride extended-release tablets 2 mg/240 mg, and trandolapril and verapamil hydrochloride extended-release tablets 4 mg/240 mg. The tablets also contain the following ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, ferric oxide red, hypromellose, lactose monohydrate, povidone, sodium alginate, sodium stearyl fumarate, magnesium stearate, and microcrystalline cellulose. The film coating contains: 1 mg/240 mg – hypromellose, titanium dioxide, and polyethylene glycol; 2 mg/180 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide red, and FD&C blue #2; 2 mg/240 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, iron oxide black, and iron oxide red; 4 mg/240 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, iron oxide red, and iron oxide black. trandolapril-structure

Tretinoin, USP is a retinoid. The chemical name is all-trans retinoic acid. The molecular formula is C 20 H 28 O 2 and the molecular weight is 300.44 g/mol. The structural formula is: It is a yellow to yellow-orange, crystalline powder with melting point at about 182°C (with decomposition). Tretinoin, USP is very sparingly soluble in water. Tretinoin is available as capsules containing 10 mg tretinoin for oral use. Each capsule contains the following inactive ingredients: butylated hydroxyanisole, edetate disodium, hydrogenated vegetable oil, refined soybean oil and yellow wax. The ingredients in the capsule shell include gelatin, glycerin, sorbitol, red iron oxide, titanium dioxide. The ingredients in the edible imprinting ink include ammonium hydroxide, black iron oxide, propylene glycol and shellac. The ingredients in the processing aid Phosal 53 include lecithin, caprylic/capric triglycerides, ethanol, sunflower mono/diglycerides, oleic acid, ascorbyl palmitate and tocopherol. structure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide USP is designated chemically as 9-Fluoro-11, 16, 17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Structural Formula: C 24 H 31 FO 6 , MW 434.50 Each gram of 0.1% and 0.5% Triamcinolone Acetonide Ointment USP contains 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum. Triamcinolone Acetonide Structure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide USP is designated chemically as 9-Fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. Graphic Formula: C 24 H 31 FO 6 M.W. 434.50 Each gram of Triamcinolone Acetonide Cream USP, 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of emulsifying wax, cetyl alcohol, isopropyl palmitate, sorbitol solution, glycerine, lactic acid, benzyl alcohol and purified water. Triamcinolone Acetonide Chemical Structure

Trospium chloride, USP is a quaternary ammonium compound with the chemical name of Spiro [8-azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1 R , 3 r , 5 S ). The empirical formula of trospium chloride, USP is C 25 H 30 ClNO 3 and its molecular weight is 427.96 g/mol. The structural formula of trospium chloride, USP is represented below: Trospium chloride, USP is a white or almost white, crystalline powder. It is very soluble in water, freely soluble in methanol, practically insoluble in methylene chloride. Each Trospium Chloride Tablet, USP contains 20 mg of trospium chloride, USP, a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, corn starch, povidone, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, titanium dioxide, polyethylene glycol 400, hypromellose, yellow iron oxide and red iron oxide. structure

Ursodiol Tablets, USP 250 mg are available as film-coated tablets for oral administration. Ursodiol Tablets, USP 500 mg are available as scored film-coated tablets for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a white to almost white crystalline powder, freely soluble in alcohol and glacial acetic acid, sparingly soluble in chloroform, slightly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C 24 H 40 O 4 ). Ursodiol has a molecular weight of 392.57. Its structure is shown below. Inactive ingredients: microcrystalline cellulose, povidone, sodium starch glycolate, magnesium stearate, ethylcellulose, dibutyl sebacate, carnauba wax, hypromellose, PEG 3350, PEG 8000, cetyl alcohol and sodium lauryl sulfate. structure

Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis ). The chemical name for vancomycin hydrochloride, USP is (S a )- (3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexo-pyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro- 2,3,4,5,6,7,23,24,25, 26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2 (methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano) 13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiaszacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66 H 75 Cl 2 N 9 O 24 • HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula: Vancomycin Hydrochloride for Injection, USP is a sterile off-white to light tan colored lyophilized plug or powder for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg, 1.28 g, or 1.54 g of vancomycin hydrochloride, USP equivalent to 750 mg, 1.25 g, or 1.5 g of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless or light to dark tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration ( 2.5 )]. structure

Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α 4 β 2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is a powder which is white to off white to slightly yellow solid with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano-6 H -pyrazino[2,3- h][3]benzazepine, (2 R ,3 R )-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water and very slightly soluble in methanol. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C 13 H 13 N 3 • C 4 H 6 O 6 . The chemical structure is: Varenicline tablets are supplied for oral administration in two strengths: a 0.5 mg white to off-white, modified capsule shaped, film-coated tablets debossed with 'L' on one side and '11' on other side and a 1 mg light pink to pink color, modified capsule shaped, film coated tablets debossed with 'L' on one side and '12' on other side. Each 0.5 mg varenicline tablets contains 0.85 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablets contains 1.71 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: anhydrous dibasic calcium phosphate, butylated hydroxyanisole, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, maltodextrin, microcrystalline cellulose. The tablet film coating contains hydroxypropyl cellulose, hypromellose, and titanium dioxide. In addition to these, the 1 mg tablet film coating also includes D&C Red #27/phloxine aluminum lake, D&C yellow #10 aluminum lake, and FD&C blue #1/brilliant blue FCF aluminum lake and talc. chemicalstructure

Verapamil Hydrochloride Extended-Release Tablets, USP are calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil Hydrochloride Extended-Release Tablets, USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg of verapamil hydrochloride, USP (equivalent to 111.08 mg verapamil free base), as brown colored, oval, biconvex, film-coated tablets containing 180 mg of verapamil hydrochloride, USP (equivalent to 166.62 mg verapamil free base), and as brown colored, oval, biconvex, film-coated tablets containing 240 mg of verapamil hydrochloride, USP (equivalent to 222.16 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl, USP is given below: C 27 H 38 N 2 O 4 ·HCl M.W. 491.06 g/mol Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)-ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. Verapamil HCl, USP is not chemically related to other cardio active drugs. In addition to verapamil HCl, USP, the Verapamil Hydrochloride Extended-Release Tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium alginate, and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black FDA approved dissolution test specifications differ from USP for Verapamil Hydrochloride Extended-Release Tablets, USP, 120 mg, 180 mg and 240 mg. structure

VIORELE ® (desogestrel and ethinyl estradiol tablets, USP and ethinyl estradiol tablets, USP) provides an oral contraceptive regimen of 21 white to off-white, round tablets each containing 0.15 mg desogestrel, USP (13-ethyl-11- methylene-18,19-dinor-17 alpha-pregn- 4-en- 20-yn-17-ol), 0.02 mg ethinyl estradiol, USP (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3,17-diol), and inactive ingredients which include vitamin E, potato starch, povidone, isopropyl alcohol, colloidal silicon dioxide, stearic acid, lactose, hypromellose, titanium dioxide, macrogol, talc, followed by 2 inert pale green to yellowish green, round tablets with following inactive ingredients: lactose, starch, magnesium stearate, hypromellose, titanium dioxide, macrogol, talc, iron oxide yellow, FD&C blue No. 2 indigo carmine aluminum lake. VIORELE ® also contains 5 light yellow to yellow, round tablets containing 0.01 mg ethinyl estradiol, USP (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3, 17-diol) and inactive ingredients which include vitamin E, lactose, potato starch, povidone, isopropyl alcohol, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, macrogol, talc, iron oxide yellow. The molecular weights for desogestrel, USP and ethinyl estradiol, USP are 310.48 g/mol and 296.40 g/mol respectively. The structural formulas are as follows: figure

Voriconazole Tablets, an azole antifungal agent, are available as film-coated tablets for oral administration. The structural formula is: Voriconazole, USP is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H -1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C 16 H 14 F 3 N 5 O and a molecular weight of 349.3. Voriconazole, USP drug substance is a white to off-white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole, USP. The inactive ingredients include croscarmellose sodium, lactose monohydrate, magnesium stearate, pregelatinized starch, povidone, talc, and coating material containing hypromellose, lactose monohydrate, titanium dioxide, and triacetin. structure

Zolmitriptan Orally Disintegrating Tablets, USP contain zolmitriptan, which is a selective 5-hydroxytryptamine 1B/1D (5-HT 1B/1D ) receptor agonist. Zolmitriptan is chemically designated as (4S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure: The molecular formula is C 16 H 21 N 3 O 2 , representing a molecular weight of 287.36 g/mol. Zolmitriptan is a white to off-white powder that is soluble in methanol and acetone; insoluble in water. Zolmitriptan Orally Disintegrating Tablets, USP are available as 2.5 mg and 5 mg white uncoated tablets for oral administration. The orally disintegrating tablets contain aspartame [see Warnings and Precautions ( 5.9 ) ], colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor and talc. The peppermint flavor contains corn starch. structure

Zonisamide, USP is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide, USP, 1,2-benzisoxazole-3-methanesulfonamide. The empirical formula is C 8 H 8 N 2 O 3 S with a molecular weight of 212.23 g/mol. Zonisamide, USP is a white powder, pK a = 10.2, and is moderately soluble in water (0.80 mg/mL) and 0.1 N HCl (0.50 mg/mL). The chemical structure is: Zonisamide, USP is supplied for oral administration as capsules containing 25 mg, 50 mg or 100 mg zonisamide, USP. Each capsule contains the labeled amount of zonisamide, USP plus the following inactive ingredients: hydrogenated vegetable oil, microcrystalline cellulose, and sodium lauryl sulfate. The printed capsule shell of the different strengths is made from the following ingredients: 25 mg – D&C Red #28, FD&C Blue #1, gelatin and titanium dioxide 50 mg – D&C Yellow #10, FD&C Blue #1, FD&C Red #40, gelatin and titanium dioxide 100 mg – D&C Yellow #10, FD&C Blue #1, FD&C Yellow #6, gelatin and titanium dioxide The dyes used in the printing ink are FD&C Blue #1, FD&C Blue #2, FD&C Red #40, D&C Yellow #10 aluminum lake and iron oxide black. Additionally, the printing ink also contains propylene glycol and shellac. structure.jpg