fresenius kabi usa, llc - Medication Listings

The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl) methyl]-4H-carbazol-4-one, monohydrochloride,dihydrate. It has the following structural formula: The empirical formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron is a white to off-white powder that is sparingly soluble in water. Each 1 mL of the preservative-free aqueous solution in the 2-mL single dose vial contains 2 mg of ondansetron as the hydrochloride; 9 mg of sodium chloride; and 0.5 mg of citric acid monohydrate and 0.25 mg of sodium citrate dihydrate as buffers in water for injection. Each 1 mL of the preserved aqueous solution in the 20-mL multiple dose vial contains 2 mg of ondansetron as the hydrochloride; 8.3 mg of sodium chloride; 0.5 mg of citric acid monohydrate and 0.25 mg of sodium citrate dihydrate as buffers; and 1.2 mg of methylparaben and 0.15 mg of propylparaben as preservatives in water for injection. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0. Structural Formula

The active ingredient in Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT 3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The empirical formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0. Structural Formula

Ustekinumab-aauz, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-aauz is produced in a Chinese hamster ovary (CHO) cell line. The manufacturing process contains steps for the clearance of viruses. Ustekinumab-aauz is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. OTULFI (ustekinumab-aauz) injection is a sterile, preservative-free, clear to slightly opalescent, and colorless to slightly brown-yellow solution with pH of 5.7- 6.3. OTULFI for Subcutaneous Use Available as 45 mg of ustekinumab-aauz in 0.5 mL and 90 mg of ustekinumab-aauz in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29 gauge fixed ½ inch needle and as 45 mg of ustekinumab in 0.5 mL in a single-dose 3 mL Type I glass with a coated stopper. The syringe is fitted with a passive needle guard and a needle cover that is not made with natural rubber (latex). Each 0.5 mL prefilled syringe or vial delivers 45 mg ustekinumab-aauz, histidine (0.512 mg), Polysorbate 80 (0.02 mg), sucrose (38 mg) and hydrochloric acid (to adjust pH). Each 1 mL prefilled syringe delivers 90 mg ustekinumab-aauz, histidine (1.024 mg), Polysorbate 80 (0.04 mg), sucrose (76 mg) and hydrochloric acid (to adjust pH). OTULFI for Intravenous Infusion Available as 130 mg of ustekinumab-aauz in 26 mL, supplied as a single-dose 30 mL Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-aauz, edetate disodium (0.47 mg), histidine (20 mg), L-histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), Polysorbate 80 (10.4 mg) and sucrose (2210 mg).

Oxacillin for Injection, USP is a semisynthetic penicillin antibiotic derived from the penicillin nucleus, 6-amino-penicillanic acid. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). It is the sodium salt in parenteral dosage form for intramuscular or intravenous use. Each vial of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 1 gram or 2 grams of oxacillin. The sodium content is 64 mg (2.8 mEq) per gram oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram oxacillin. Oxacillin for Injection, USP is white to off white powder and gives a clear solution upon reconstitution. OXACILLIN SODIUM The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4-isoxazolyl) carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2 S (2α,5α,6β)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19 H 18 N 3 NaO 5 S • H 2 O. The molecular weight is 441.44. structure

Oxacillin for Injection, USP is a semisynthetic penicillin antibiotic derived from the penicillin nucleus, 6-amino-penicillanic acid. It is the sodium salt in parenteral dosage form. Each Pharmacy Bulk Package bottle of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 10 grams of oxacillin. The sodium content is 64 mg [2.8 mEq] per gram oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram oxacillin. Oxacillin for Injection, USP is a white to off-white powder filled in clear glass bottles. Dilute solutions are essentially clear and colorless to yellow. The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4-isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2 S (2α,5α,6β)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19 H 18 N 3 NaO 5 S•H 2 O. The molecular weight is 441.44. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) . FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION. structure

Oxaliplatin is a platinum-based drug with the molecular formula C 8 H 14 N 2 O 4 Pt and the chemical name of cis -[(1 R ,2 R )-1,2-cyclohexanediamine- N,N' ] [oxalato(2-)- O,O' ] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin Injection, USP, for intravenous use is supplied in vials containing 50 mg or 100 mg of oxaliplatin as a sterile, preservative-free, aqueous solution at a concentration of 5 mg/mL. Water for Injection, USP is present as an inactive ingredient. Structural Formula

Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is: structure

Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is: structure

Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is: struc

Paclitaxel Injection, USP is a clear, colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel Injection, USP is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multidose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, USP, 527 mg of polyoxyl 35 castor oil, NF, and 49.7% (v/v) dehydrated alcohol, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via a semi-synthetic process from Taxus baccata . The chemical name for paclitaxel is (2a R ,4 S ,4a S ,6 R ,9 S ,11 S ,12 S ,12a R ,12b S )-1,2a,3,4,4a,6,9,10,11,12, 12a,12b-Dodecahydro-4,6,9,11,12,12b-hexahydroxy-4a,8,13, 13-tetramethyl-7,11-methano-5 H -cyclodeca[3,4]-benz[1,2- b ] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2 R ,3 S )- N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula: Paclitaxel, USP is a white to off-white powder with the empirical formula C 47 H 51 NO 14 and a molecular weight of 853.9. It is insoluble in water, soluble in alcohol and melts at around 212°C to 217°C. paclitaxel

Palonosetron Hydrochloride Injection contains palonosetron as palonosetron HCl, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT 3 ) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3a S )-2-[( S )- 1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1 H benz[ de ] isoquinoline hydrochloride. Palonosetron hydrochloride exists as a single isomer and has the following structural formula: C 19 H 24 N 2 O•HCl M.W. 332.87 Palonosetron Hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, non-pyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron HCl), 202.4 mg mannitol, edetate disodium dihydrate and citrate buffer in water for intravenous administration. The pH of the solution in the 5 mL vial is 4.5 to 5.5. Structural Formula

Palonosetron Hydrochloride Injection contains palonosetron as palonosetron HCl, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT 3 ) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3a S )-2-[( S )- 1-Azabicyclo [2.2.2]oct-3- yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1 H benz[ de ] isoquinoline hydrochloride. Palonosetron hydrochloride exists as a single isomer and has the following structural formula: C 19 H 24 N 2 O•HCl M.W. 332.87 Palonosetron Hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, non-pyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose prefilled syringe. Each 5 mL syringe contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron HCl), 202.4 mg mannitol, 2.5 mg edetate disodium dihydrate, 18 mg trisodium citrate dihydrate, and 7 mg citric acid anhydrous in water for intravenous administration. The pH of the solution in the 5 mL syringe is 4.5 to 5.5. Structural Formula

Pemetrexed for Injection, USP is a folate analog metabolic inhibitor. Pemetrexed disodium, has the chemical name L-glutamic acid, N -[4-[2-(2-amino-4,7-dihydro-4-oxo-1 H -pyrrolo[2,3- d ]pyrimidin-5-yl)ethyl]benzoyl]-, disodium salt. The structural formula is as follows: C 20 H 19 N 5 Na 2 O 6 M.W. 471.37 Pemetrexed for Injection, USP is a sterile white-to-light yellow or green-yellow lyophilized powder in single-dose vials to be reconstituted for intravenous infusion. Each 100 mg, 500 mg, 750 mg or 1 g vial of Pemetrexed for Injection, USP contains pemetrexed disodium equivalent to 100 mg pemetrexed and 106 mg mannitol, 500 mg pemetrexed and 500 mg mannitol, 750 mg pemetrexed and 750 mg mannitol or 1 g pemetrexed and 1 g mannitol, respectively. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH. pemet-struc-01.jpg

Pentam 300 (pentamidine isethionate for injection), an anti-protozoal agent, is a sterile, nonpyrogenic, lyophilized product. After reconstitution, it should be administered by intramuscular (IM) or intravenous (IV) routes (see DOSAGE AND ADMINISTRATION ). Pentamidine isethionate is a white crystalline powder soluble in water and glycerin, slightly soluble in alcohol and insoluble in ether, acetone, and chloroform. It is chemically designated as 4,4-[1,5-pentanediylbis(oxy)]bis-benzenecarboximidamid with the following structural formula: Each vial contains: Pentamidine isethionate . . . . . . . . . . . . . 300 mg pentam-structure

PERIKABIVEN is a sterile, hypertonic emulsion, for peripheral or central venous administration, in a Three Chamber Bag. The product contains no added sulfites. Chamber 1 contains Dextrose monohydrate solution for fluid replenishment and caloric supply. Chamber 2 contains the Amino Acid solution with Electrolytes, which comprises essential and nonessential amino acids provided with electrolytes. Chamber 3 contains Intralipid ® 20% (a 20% Lipid Injectable Emulsion), prepared for intravenous administration as a source of calories and essential fatty acids. See below for formulations of each chamber and Table 2 for strength, pH, osmolarity, ionic concentration and caloric content of PERIKABIVEN when all the chambers are mixed together. Chamber 1: Contains sterile, hypertonic solution of Dextrose, USP in water for injection with a pH range of 3.5 to 5.5. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O) and has the following structure: Dextrose is derived from corn. Chamber 2 : Contains a sterile solution of amino acids and electrolytes in water for injection. In addition, glacial acetic acid has been added to adjust the pH so that the final solution pH is 5.4 to 5.8. The formulas for the individual electrolytes and amino acids are as follows: Electrolytes Sodium Acetate Trihydrate, USP CH 3 COONax3H 2 O Potassium Chloride, USP KCl Sodium Glycerophosphate C 3 H 5 (OH) 2 PO 4 Na 2 xH 2 O Magnesium Sulfate Heptahydrate, USP MgSO 4 x7H 2 O Calcium Chloride Dihydrate, USP CaCl 2 x2H 2 O Essential Amino Acids Lysine (added as the hydrochloride salt) H 2 N(CH 2 ) 4 CH(NH 2 )COOH.HCl Phenylalanine CH 2 CH(NH 2 )COOH Leucine (CH 3 ) 2 CHCH 2 CH(NH 2 )COOH Valine (CH 3 ) 2 CHCH(NH 2 )COOH Histidine CH 2 CH(NH 2 )COOH Threonine CH 3 CH(OH)CH(NH 2 )COOH Methionine CH 3 S(CH 2 ) 2 CH(NH 2 )COOH Isoleucine CH 3 CH 2 CH(CH 3 )CH(NH 2 )COOH Tryptophan CH 2 CH(NH 2 )COOH Nonessential Amino Acids Alanine CH 3 CH(NH 2 )COOH Arginine H 2 NC(NH)NH(CH 2 ) 3 CH(NH 2 )COOH Glycine H 2 NCH 2 COOH Proline Glutamic Acid HOOC(CH 2 ) 2 CH(NH 2 )COOH Serine HOCH 2 CH(NH 2 )COOH Aspartic Acid HOOCCH 2 CH(NH 2 )COOH Tyrosine Chamber 3: Contains a 20% Lipid Injectable Emulsion (Intralipid ® 20%) which is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and water for injection. In addition, sodium hydroxide has been added to adjust the pH. The final product pH range is 6 to 9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure: where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (48 to 58 %), oleic (17 to 30%), palmitic (9 to 13%), linolenic (5 to 11%) and stearic acid (2.5 to 5%). These fatty acids have the following chemical and structural formulas: Linoleic acid C 18 H 32 O 2 Oleic acid C 18 H 34 O 2 Palmitic acid C 16 H 32 O 2 Linolenic acid C 18 H 30 O 2 Stearic acid C 18 H 36 O 2 Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure: contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C 3 H 8 O 3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula: The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. An oxygen absorber is placed between the inner bag and the overpouch. The container is not made with natural rubber latex or polyvinyl chloride (PVC). PERIKABIVEN contains no more than 25 mcg/L of aluminum. Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure

Phenylephrine Hydrochloride Injection contain active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Chemically, phenylephrine hydrochloride is (-)- m -Hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and has the following structural formula: Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. Phenylephrine Hydrochloride Injection, USP is a clear, colorless, aqueous solution that is essentially free of visible foreign matter. It MUST BE DILUTED before administration as bolus intravenous infusion or continuous intravenous infusion. Each mL contains: Phenylephrine Hydrochloride 10 mg; Sodium Chloride 3.5 mg; Sodium Citrate Dihydrate 4 mg; and Citric Acid 1 mg in water for injection. The pH may be adjusted in the range of 3.5 to 5.5 with Sodium Hydroxide and/or Hydrochloric Acid, if necessary. Structural Formula

Phenylephrine Hydrochloride Injection contain active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Chemically, phenylephrine hydrochloride is (-)- m -Hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and has the following structural formula: Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. Phenylephrine Hydrochloride Injection, USP is a clear, colorless, aqueous solution that is essentially free of visible foreign matter. It MUST BE DILUTED before administration as bolus intravenous infusion or continuous intravenous infusion. Each mL contains: Phenylephrine Hydrochloride 10 mg; Sodium Chloride 3.5 mg; Sodium Citrate Dihydrate 4 mg; and Citric Acid 1 mg in water for injection. The pH may be adjusted in the range of 3.5 to 5.5 with Sodium Hydroxide and/or Hydrochloric Acid, if necessary. Structural Formula

Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of Phenylephrine hydrochloride is (-)- m -hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9 H 14 C1NO 2 with a molecular weight of 203.67 g/mol. Its structural formula is depicted below: Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg/mL, is sensitive to light. Each mL contains: Phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, and citric acid 1 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5. Structural Formula

Phytonadione is a vitamin, which is a clear, yellow to amber, viscous, odorless or nearly odorless liquid. It is insoluble in water, soluble in chloroform and slightly soluble in ethanol. It has a molecular weight of 450.70. Phytonadione is 2-methyl-3-phytyl-1, 4-naphthoquinone. Its molecular formula is C 31 H 46 O 2 and its structural formula is: Phytonadione injectable emulsion, USP is a yellow, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Each milliliter contains phytonadione, USP, 10 mg, polyoxyethylated fatty acid derivative 70 mg, dextrose, hydrous 37.5 mg in water for injection; benzyl alcohol 9 mg added as preservative. May contain hydrochloric acid for pH adjustment. pH is 4.5 to 7.0. Phytonadione is oxygen sensitive. phyto-struc-01.jpg

Piperacillin and tazobactam for injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the β-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazinecarboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and tazobactam for injection, piperacillin/tazobactam parenteral combination, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. The pharmacy bulk package bottle is a container of sterile preparation which contains many single doses for parenteral use. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. Each piperacillin and tazobactam for injection 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Piperacillin and tazobactam for injection is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. structure 1 structure 2

Piperacillin and tazobactam for injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the β-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazinecarboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and tazobactam for injection, piperacillin/tazobactam parenteral combination, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. The pharmacy bulk package bottle is a container of sterile preparation which contains many single doses for parenteral use. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. Each piperacillin and tazobactam for injection 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Piperacillin and tazobactam for injection is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. structure 1 structure 2

Piperacillin and tazobactam for injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the β-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazinecarboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and tazobactam for injection, piperacillin/tazobactam parenteral combination, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. The pharmacy bulk package bottle is a container of sterile preparation which contains many single doses for parenteral use. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. Each piperacillin and tazobactam for injection 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Piperacillin and tazobactam for injection is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. structure structure 2

Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S ,3 S ,5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S ,3 S ,5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and tazobactam for injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the β-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazinecarboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and tazobactam for injection, piperacillin/tazobactam parenteral combination, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.7 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.0 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.4 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Chemical Structure Chemical Structure

Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S ,3 S ,5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Meets USP Organic Impurities, Procedure 1. Piperacillin Sodium Structural Formula Tazobactam Sodium Structural Formula

Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection, USP 40.5 g pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 g of tazobactam sufficient for delivery of multiple doses. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The structure of piperacillin sodium is: C 23 H 26 N 5 NaO 7 S M.W. 539.5 Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The structure of tazobactam sodium is: C 10 H 11 N 4 NaO 5 S M.W. 322.3 Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Piperacillin and tazobactam for injection, USP is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. • Each Piperacillin and Tazobactam for Injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. • Each Piperacillin and Tazobactam for Injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. • Each Piperacillin and Tazobactam for Injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Meets USP Organic Impurities, Procedure 1. Structure of Piperacillin Sodium Structure of Tazobactam Sodium

Piperacillin and tazobactam for injection is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the β-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazinecarboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S, 3 S, 5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and tazobactam for injection, piperacillin/tazobactam parenteral combination, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Each piperacillin and tazobactam for injection 2.25 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.7 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection 3.375 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.0 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection 4.5 g single dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.4 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Chemical Structure Chemical Structure

Plerixafor injection is a sterile, preservative-free, clear, colorless to pale-yellow, isotonic solution for subcutaneous injection. Each mL of the sterile solution contains 20 mg of plerixafor. Each single-dose vial is filled to deliver 1.2 mL of the sterile solution that contains 24 mg of plerixafor and 5.9 mg of sodium chloride in Water for Injection adjusted to a pH of 6.0 to 7.5 with hydrochloric acid and with sodium hydroxide, if required. Plerixafor is a hematopoietic stem cell mobilizer with a chemical name 1,4-Bis((1,4,8,11-tetraazacyclotetradecan-1-yl)methyl)benzene. It has the molecular formula C 28 H 54 N 8 . The molecular weight of plerixafor is 502.79 g/mol. The structural formula is provided in Figure 1 . Figure 1: Structural Formula Plerixafor is a white to off-white crystalline solid. It is hygroscopic. Plerixafor has a typical melting point of 131.5°C. The partition coefficient of plerixafor between 1-octanol and pH 7 aqueous buffer is <0.1. Figure 1: Structural Formula

Mepivacaine hydrochloride is 2-Piperidinecarboxamide, N-(2, 6-dimethylphenyl)-1-methyl-, monohydrochloride and has the following structural formula: C 15 H 22 N 2 O • HCl It is a white, crystalline, odorless powder, soluble in water, but very resistant to both acid and alkaline hydrolysis. Mepivacaine hydrochloride is a local anesthetic available as sterile isotonic solutions (clear, colorless) in concentrations of 1%, 1.5% and 2% for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Mepivacaine hydrochloride is related chemically and pharmacologically to the amide-type local anesthetics. It contains an amide linkage between the aromatic nucleus and the amino group. Composition of Available Solutions* 1% Single Dose 30 mL Vial mg/mL 1% Multiple Dose 50 mL Vial mg/mL 1.5% Single Dose 30 mL Vial mg/mL 2% Single Dose 20 mL Vial mg/mL 2% Multiple Dose 50 mL Vial mg/mL Mepivacaine hydrochloride 10 10 15 20 20 Sodium chloride 6.6 7 5.6 4.6 5 Potassium chloride 0.3 0.3 0.3 Calcium chloride 0.33 0.33 0.33 Methylparaben 1 1 *In Water For Injection The pH of the solution is adjusted between 4.5 and 6.8 with sodium hydroxide or hydrochloric acid. structure

Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous) . Polymyxin B sulfate is the sulfate salt of Polymyxins B 1 and B 2 , which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are: Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable. Structural Formulae

Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous) . Polymyxin B sulfate is the sulfate salt of Polymyxins B 1 and B 2 , which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are: Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable. Structural Formulae

Polymyxin B for Injection is one of a group of basic polypeptide antibiotics derived from B polymyxa (B aerosporous) . Polymyxin B sulfate is the sulfate salt of Polymyxins B 1 and B 2 , which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are: Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable. Structural Formulae

Potassium Acetate Injection, USP (2 mEq/mL) is a sterile, nonpyrogenic, concentrated solution of potassium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 196 mg of potassium acetate which provides 2 mEq each of potassium (K + ) and acetate (CH 3 COO − ). The solution may contain acetic acid for pH adjustment. The pH is 6.2 (range: 5.5 to 8.0). The osmolar concentration is 4 mOsmol/mL (calc.); specific gravity is 1.089. The Pharmacy Bulk Package is a sterile dosage which contains multiple single doses for use only in a pharmacy bulk admixture program. The solution is intended as an alternative to potassium chloride to provide potassium ion (K + ) for addition to large volume infusion fluids for intravenous use. Potassium Acetate, USP is chemically designated CH 3 COOK, and is comprised of colorless crystals or a white crystalline powder that is very soluble in water. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures. The Pharmacy Bulk Package contains no bacteriostat, antimicrobial agent, or added buffer. Multiple single doses may be dispensed during continual aliquoting operations.

Potassium Acetate Injection, USP, 40 mEq is a sterile, nonpyrogenic, concentrated solution of potassium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL vial contains 3.93 g of potassium acetate which provides 40 mEq each of potassium (K + ) and acetate (CH 3 COO − ). It contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment. pH 6.2 (5.5 to 8.0). The osmolar concentration is 4 mOsmol/mL (calc.). The solution is intended as an alternative to potassium chloride to provide potassium ion (K + ) for addition to large volume infusion fluids for intravenous use. Potassium acetate, USP is chemically designated CH 3 COOK, colorless crystals or white crystalline powder very soluble in water. The semi-rigid vial is fabricated from a specially formulated polypropylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.

Potassium Chloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single-dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1 . Table 1 * Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. ** Size (mL) Composition (g/L) Ionic Concentration (mEq/L) Caloric Content (kcal/L) Potassium Chloride in 5% Dextrose Injection, USP **Dextrose Hydrous, USP Potassium Chloride, USP (KCl) *Osmolarity (mOsmol/L) (calc.) pH Potassium Chloride mEq Potassium 10 mEq 1000 50 0.75 272 4.5 (3.5 to 6.5) 10 10 170 20 mEq 1000 50 1.5 293 4.5 (3.5 to 6.5) 20 20 170 D-Glucose monohydrate Dextrose is derived from corn. The flexible plastic container is fabricated from a specially formulated nonplasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Structural Formula

Potassium Chloride for Injection Concentrate, USP is a sterile, nonpyrogenic concentrated solution of Potassium Chloride, USP in Water for Injection to be administered by intravenous infusion only after dilution in a larger volume of fluid. Each mL of Potassium Chloride for Injection Concentrate contains 2 mEq of K + and Cl – equivalent to 149 mg of potassium chloride and has an osmolarity of 4000 mOsmol/L (calc). A more concentrated Potassium Chloride for Injection Concentrate is also available. Each mL of this injection contains 3 mEq of K + and Cl – equivalent to 224 mg of potassium chloride and has an osmolarity of 6000 mOsmol/L(calc). pH (4.0-8.0) may have been adjusted with hydrochloric acid and if necessary, potassium hydroxide. Some packages are intended for multiple dose use and contain preservatives (0.05% methylparaben and 0.005% propylparaben). A summary of the available products is presented in the HOW SUPPLIED section. Potassium Chloride for Injection Concentrate (appropriately diluted) is a parenteral fluid and electrolyte replenisher.

This Potassium Chloride Injection, is a sterile, nonpyrogenic, highly concentrated, ready-to-use, solution of Potassium Chloride, USP in Water for Injection, USP for electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents. *Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. Composition (g/L) Osmolarity* (mOsmol/L) (calc) pH Ionic Concentration (mEq/L) Potassium Chloride Injection mEq Potassium/Container Potassium Chloride, USP (KCI) Potassium Chloride 10 mEq/100 mL 7.46 200 5.0 (4.0 to 8.0) 100 100 10 mEq/50 mL 20 mEq/100 mL 14.9 400 5.0 (4.0 to 8.0) 200 200 20 mEq/50 mL 40 mEq/100 mL 29.8 799 5.0 (4.0 to 8.0) 400 400 The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. Table 1 COMPOSITION (g/L) Approx. Ionic Concentrations (mEq/L) Potassium Chloride in 5% Dextrose and 0.9% Sodium Chloride Injection, USP mEq Potassium Size (mL) Dextrose, Hydrous Sodium Chloride Potassium Chloride Calculated Osmolarity (mOsmol/L) pH Sodium (Na + ) Potassium (K + ) Chloride (Cl - ) Approximate Kcal/L 20 mEq 1000 50 9 1.49 600 4.2 (3.5 to 6.5) 154 20 174 170 40 mEq 1000 50 9 2.98 640 4.2 (3.5 to 6.5) 154 40 194 170 May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. It has the following structural formula: Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. Figure

Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. Table 1 COMPOSITION (g/L) Approx. Ionic Concentrations (mEq/L) Potassium Chloride in 5% Dextrose and 0.225% Sodium Chloride Injection, USP mEq Potassium Size (mL) Dextrose, Hydrous Sodium Chloride Potassium Chloride Calculated Osmolarity (mOsmol/L) pH Sodium (Na + ) Potassium (K + ) Chloride (Cl - ) Approximate Kcal/L 10 mEq 500 50 2.25 1.49 370 4.2 (3.5 to 6.5) 38.5 20 58.5 170 20 mEq 1000 50 2.25 1.49 370 4.2 (3.5 to 6.5) 38.5 20 58.5 170 May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. It has the following structural formula: Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. Structural Formula

Intravenous solutions with potassium chloride (I.V. solutions with KCl) are sterile and nonpyrogenic solutions in water for injection. They are for administration by intravenous infusion only. See table below for summary of content and characteristics of these solutions. Table 1 COMPOSITION (g/L) Approx. Ionic Concentrations (mEq/L) Potassium Chloride in 5% Dextrose and 0.45% Sodium Chloride Injection, USP mEq Potassium Size (mL) Dextrose, Hydrous Sodium Chloride Potassium Chloride Calculated Osmolarity (mOsmol/L) pH Sodium (Na + ) Potassium (K + ) Chloride (Cl - ) Approximate Kcal/L 10 mEq 500 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 10 mEq 1000 50 4.5 0.745 426 4.2 (3.5 to 6.5) 77 10 87 170 20 mEq 1000 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 30 mEq 1000 50 4.5 2.24 467 4.2 (3.5 to 6.5) 77 30 107 170 40 mEq 1000 50 4.5 2.98 487 4.2 (3.5 to 6.5) 77 40 117 170 May contain HCl for pH adjustment. The solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. These solutions are parenteral fluid, nutrient and/or electrolyte replenishers. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. It has the following structural formula: Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag) . Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. Figure

Intravenous solution with potassium chloride (I.V. solutions with KCl) is a sterile and nonpyrogenic solution in water for injection. This solution is for administration by intravenous infusion only. See Table 1 below for summary of content and characteristics of this solution. Table 1 COMPOSITION (g/L) Calculated Osmolarity (mOsmol/L) Potassium Chloride in Lactated Ringer's and 5% Dextrose Injection, USP mEq Potassium Added Size (mL) Dextrose, Hydrous Potassium Chloride Sodium Chloride Sodium Lactate, Anhydrous Calcium Chloride Dihydrate 20 mEq 1000 50 1.79 6 3.1 0.2 563 pH Approx. Ionic Concentrations (mEq/L) Approx. kcal/L Calcium (Ca++) Sodium (Na+) Potassium (K+) Chloride (Cl-) Lactate 4.9 (3.5 to 6.5) 2.7 130 24 129 28 179 May contain HCl for pH adjustment. The solution contains no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded. This solution is a parenteral fluid, nutrient and/or electrolyte replenisher. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. It has the following structural formula: Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Calcium Chloride, USP is chemically designated calcium chloride dihydrate (CaCl 2 • 2H 2 O), white fragments or granules freely soluble in water. Sodium Lactate, USP is chemically designated monosodium lactate [CH 3 CH(OH)COONa], a 50% aqueous solution miscible in water. It has the following structural formula: Water for Injection, USP is chemically designated H 2 0. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in the moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. Dextrose Structural Formula Calcium Chloride Structural Formula

Potassium Chloride in Sodium Chloride Injection, USP is a sterile, nonpyrogenic, solution for fluid and electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH and ionic concentration are shown in Table 1 . Table 1 *Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. Size (mL) Composition (g/L) *Osmolarity (mOsmol/L) (Calc.) pH Ionic Concentration (mEq/L) Sodium Chloride, USP NaCl Potassium Chloride, USP KCl Sodium Potassium Chloride 20 mEq/L Potassium Chloride in 0.45% Sodium Chloride Injection, USP 1000 4.5 1.5 194 5.5 (3.5 to 6.5) 77 20 97 20 mEq/L Potassium Chloride in 0.9% Sodium Chloride Injection, USP 1000 9 1.5 348 5.5 (3.5 to 6.5) 154 20 174 40 mEq/L Potassium Chloride in 0.9% Sodium Chloride Injection, USP 1000 9 3 388 5.5 (3.5 to 6.5) 154 40 194 The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Potassium Phosphates in Sodium Chloride Injection is a phosphorus replacement product. It is a sterile, non-pyrogenic, solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in sodium chloride. It is supplied as a 100 mL and 250 mL ready-to-use single dose container for intravenous use and does not require further dilution. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4, molecular weight 174.18, colorless or white granular salt freely soluble in water. For 100 mL single-dose container: Each mL contains 11.2 mg of monobasic potassium phosphate and 11.8 mg of dibasic potassium phosphate. Each mL contains 0.15 mmol phosphorus (equivalent to 4.65 mg phosphorus), and 0.22 mEq potassium (equivalent to 8.50 mg of potassium). For 250 mL single-dose container: Each mL contains 4.48 mg of monobasic potassium phosphate and 4.72 mg of dibasic potassium phosphate. Each mL contains 0.06 mmol phosphorus (equivalent to 1.86 mg phosphorus), and 0.088 mEq potassium (equivalent to 3.40 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. In addition, each mL of solution contains 9 mg sodium chloride for isotonicity. The pH is 6.0 to 7.0. This product contains no more than 100 mcg/L of aluminum. The osmolality is 500-700 mOsmol/kg for the 100 mL single-dose container and 300-500 mOsmol/kg for the 250 mL single-dose container.

Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2 PO 4 , molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2 HPO 4 , molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [ see Warnings and Precautions ( 5.5 )] . The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.

Pralatrexate is a dihydrofolate reductase inhibitor. Pralatrexate has the chemical name (2 S )-2[[4-[(1 RS )-1-[(2, 4-diaminopteridin-6-yl)methyl]but-3- ynyl]benzoyl]amino]pentanedioic acid. The molecular formula is C 23 H 23 N 7 O 5 and the molecular weight is 477.48 g/mol. Pralatrexate is a 1:1 racemic mixture of S- and R- diastereomers at the C10 position (indicated with *). The structural formula is as follows: Pralatrexate is an off-white to yellow solid. It is soluble in aqueous solutions at pH 6.5 or higher. Pralatrexate is practically insoluble in chloroform and ethanol. The pKa values are 3.25, 4.76, and 6.17. Pralatrexate Injection is supplied as a preservative-free, sterile, isotonic, non-pyrogenic clear yellow aqueous solution contained in a clear glass single-dose vial (Type I) for intravenous use. Each 1 mL of solution contains 20 mg of pralatrexate, sufficient sodium chloride to achieve an isotonic (280-300 mOsm) solution, and sufficient sodium hydroxide, and hydrochloric acid if needed, to adjust and maintain the pH at 7.5-8.5. Pralatrexate Injection is supplied as either 20 mg (1 mL) or 40 mg (2 mL) single-dose vials at a concentration of 20 mg/mL. Structural Formula

Progesterone injection, a progestin, is a sterile solution of progesterone in a suitable vegetable oil available for intramuscular use. Progesterone occurs as a white or creamy white, crystalline powder. It is odorless and is stable in air. Practically insoluble in water, it is soluble in alcohol, acetone, and dioxane and sparingly soluble in vegetable oils. It has the following structural formula: C 21 H 30 O 2 M.W. 314.47 Pregn-4-ene-3, 20-dione Each mL contains: Progesterone 50 mg, benzyl alcohol 10% as preservative in sesame oil q.s. progesterone_structure