Oxacillin OXACILLIN FRESENIUS KABI USA, LLC FDA Approved Oxacillin for Injection, USP is a semisynthetic penicillin antibiotic derived from the penicillin nucleus, 6-amino-penicillanic acid. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). It is the sodium salt in parenteral dosage form for intramuscular or intravenous use. Each vial of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 1 gram or 2 grams of oxacillin. The sodium content is 64 mg (2.8 mEq) per gram oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram oxacillin. Oxacillin for Injection, USP is white to off white powder and gives a clear solution upon reconstitution. OXACILLIN SODIUM The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4-isoxazolyl) carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2 S (2α,5α,6β)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19 H 18 N 3 NaO 5 S • H 2 O. The molecular weight is 441.44. structure
FunFoxMeds bottle
Substance Oxacillin Sodium
Route
INTRAMUSCULAR INTRAVENOUS
Applications
ANDA206198

Drug Facts

Composition & Profile

Strengths
1 g 2 g 20 unit 20 ml
Quantities
20 ml
Treats Conditions
Indications And Usage Oxacillin Is Indicated In The Treatment Of Infections Caused By Penicillinase Producing Staphylococci Which Have Demonstrated Susceptibility To The Drug Cultures And Susceptibility Tests Should Be Performed Initially To Determine The Causative Organism And Its Susceptibility To The Drug See Clinical Pharmacology Susceptibility Testing Oxacillin May Be Used To Initiate Therapy In Suspected Cases Of Resistant Staphylococcal Infections Prior To The Availability Of Susceptibility Test Results Oxacillin Should Not Be Used In Infections Caused By Organisms Susceptible To Penicillin G If The Susceptibility Tests Indicate That The Infection Is Due To An Organism Other Than A Resistant Staphylococcus Therapy Should Not Be Continued With Oxacillin To Reduce The Development Of Drug Resistant Bacteria And Maintain The Effectiveness Of Oxacillin For Injection Usp And Other Antibacterial Drugs Oxacillin For Injection Usp Should Be Used Only To Treat Or Prevent Infections That Are Proven Or Strongly Suspected To Be Caused By Susceptible Bacteria When Culture And Susceptibility Information Are Available They Should Be Considered In Selecting Or Modifying Antibacterial Therapy In The Absence Of Such Data Local Epidemiology And Susceptibility Patterns May Contribute To The Empiric Selection Of Therapy

Identifiers & Packaging

Container Type BOTTLE
UNII
G0V6C994Q5
Packaging

HOW SUPPLIED: Each vial of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 1 gram or 2 grams of oxacillin. Product Code Unit of Sale Strength Each 801220 NDC 63323-812-20 Unit of 10 2 grams per vial NDC 63323-812-01 20 mL Single Dose Vial 801320 NDC 63323-813-20 Unit of 10 1 gram per vial NDC 63323-813-01 20 mL Single Dose Vial Store dry powder at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature]. The container closure is not made with natural rubber latex.; PACKAGE LABEL.PRINCIPAL DISPLAY PANEL PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 1 gram Vial Label NDC 63323-813-01 Oxacillin for Injection, USP 1 gram per vial Buffered-For Intramuscular or Intravenous use Rx only 1gramvial; PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 1 gram Carton Label NDC 63323-813-20 Oxacillin for Injection, USP 1 gram per vial Buffered-For Intramuscular or Intravenous use Rx only 10 x 1 gram Single Dose Vials 1gramctn; PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 2 gram Vial Label NDC 63323-812-01 Oxacillin for Injection, USP 2 grams per vial Buffered-For Intramuscular or Intravenous use Rx only 2 gram vial; PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 2 gram Carton Label NDC 63323-812-20 Oxacillin for Injection, USP 2 grams per vial Buffered-For Intramuscular or Intravenous use Rx only 10 x 2 gram Single Dose Vials 2gramctn

Package Descriptions
  • HOW SUPPLIED: Each vial of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 1 gram or 2 grams of oxacillin. Product Code Unit of Sale Strength Each 801220 NDC 63323-812-20 Unit of 10 2 grams per vial NDC 63323-812-01 20 mL Single Dose Vial 801320 NDC 63323-813-20 Unit of 10 1 gram per vial NDC 63323-813-01 20 mL Single Dose Vial Store dry powder at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature]. The container closure is not made with natural rubber latex.
  • PACKAGE LABEL.PRINCIPAL DISPLAY PANEL PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 1 gram Vial Label NDC 63323-813-01 Oxacillin for Injection, USP 1 gram per vial Buffered-For Intramuscular or Intravenous use Rx only 1gramvial
  • PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 1 gram Carton Label NDC 63323-813-20 Oxacillin for Injection, USP 1 gram per vial Buffered-For Intramuscular or Intravenous use Rx only 10 x 1 gram Single Dose Vials 1gramctn
  • PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 2 gram Vial Label NDC 63323-812-01 Oxacillin for Injection, USP 2 grams per vial Buffered-For Intramuscular or Intravenous use Rx only 2 gram vial
  • PACKAGE LABEL- PRINCIPAL DISPLAY – Oxacillin 2 gram Carton Label NDC 63323-812-20 Oxacillin for Injection, USP 2 grams per vial Buffered-For Intramuscular or Intravenous use Rx only 10 x 2 gram Single Dose Vials 2gramctn

Overview

Oxacillin for Injection, USP is a semisynthetic penicillin antibiotic derived from the penicillin nucleus, 6-amino-penicillanic acid. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). It is the sodium salt in parenteral dosage form for intramuscular or intravenous use. Each vial of Oxacillin for Injection, USP contains oxacillin sodium monohydrate equivalent to 1 gram or 2 grams of oxacillin. The sodium content is 64 mg (2.8 mEq) per gram oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram oxacillin. Oxacillin for Injection, USP is white to off white powder and gives a clear solution upon reconstitution. OXACILLIN SODIUM The chemical name of oxacillin sodium is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4-isoxazolyl) carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2 S (2α,5α,6β)]-. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19 H 18 N 3 NaO 5 S • H 2 O. The molecular weight is 441.44. structure

Indications & Usage

: Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY-Susceptibility Testing ). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus , therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin for Injection, USP and other antibacterial drugs, Oxacillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Dosage & Administration

Bacteriologic studies to determine the causative organisms and their susceptibility to oxacillin should always be performed. Duration of therapy varies with the type of severity of infection as well as the overall condition of the patient; therefore, it should be determined by the clinical and bacteriological response of the patient. In severe staphylococcal infections, therapy with oxacillin should be continued for at least 14 days. Therapy should be continued for at least 48 hours after the patient has become afebrile, asymptomatic, and cultures are negative. Treatment of endocarditis and osteomyelitis may require a longer duration of therapy. With intravenous administration, particularly in elderly patients, care should be taken because of the possibility of thrombophlebitis. RECOMMENDED DOSAGES FOR OXACILLIN FOR INJECTION, USP Drug Adults Infants and Children < 40 kg (88 lbs) Other Recommendations Oxacillin 250 to 500 mg IM or IV every 4 to 6 hours (mild to moderate infections) 50 mg/kg/day IM or IV in equally divided doses every 6 hours (mild to moderate infections) 1 gram IM or IV every 4 to 6 hours (severe infections) 100 mg/kg/day IM or IV in equally divided doses every 4 to 6 hours (severe infections) Premature and Neonates 25 mg/kg/day IM or IV Directions for Use For Intramuscular Use Use Sterile Water for Injection, USP. Add 5.7 mL to the 1 gram vial and 11.5 mL to the 2 gram vial. Shake well until a clear solution is obtained. After reconstitution, vials will contain 250 mg of active drug per 1.5 mL of solution. The reconstituted solution is stable for 3 days at 70°F or for one week under refrigeration (40°F). For Direct Intravenous Use Use Sterile Water for Injection, USP or Sodium Chloride Injection, USP. Add 10 mL to the 1 gram vial and 20 mL to the 2 gram vial. Withdraw the entire contents and administer slowly over a period of approximately 10 minutes. For Administration by Intravenous Drip Reconstitute as directed above (For Direct Intravenous Use) prior to diluting with Intravenous Solution. STABILITY PERIODS FOR OXACILLIN FOR INJECTION, USP Concentration mg/mL Sterile Water for Injection, USP 0.9% Sodium Chloride Injection, USP M/6 Molar Sodium Lactate Solution 5% Dextrose in Water 5% Dextrose in 0.45% Sodium Chloride 10% Invert Sugar Injection, USP Lactated Ringers Solution ROOM TEMPERATURE (25°C) 10 to 100 4 Days 4 Days 10 to 30 24 Hrs 24 Hrs 0.5 to 2 6 Hrs 6 Hrs 6 Hrs REFRIGERATION (4°C) 10 to 100 7 Days 7 Days 10 to 30 4 Days 4 Days 4 Days 4 Days 4 Days FROZEN (-15°C) 50 to 100 30 Days 250/1.5 mL 30 Days 100 30 Days 10 to 100 30 Days 30 Days 30 Days 30 Days 30 Days Stability studies on oxacillin sodium at concentrations of 0.5 mg/mL and 2 mg/mL in various intravenous solutions listed below indicate the drug will lose less than 10% activity at room temperature (70°F) during a 6-hour period. IV Solution 5% Dextrose in Normal Saline 10% Invert Sugar in Normal Saline 10% Invert Sugar Plus 0.3% Potassium Chloride in Water Only those solutions listed above should be used for the intravenous infusion of oxacillin sodium. The concentration of the antibiotic should fall within the range specified. The drug concentration and the rate and volume of the infusion should be adjusted so that the total dose of oxacillin is administered before the drug loses its stability in the solution in use. If another agent is used in conjunction with oxacillin therapy, it should not be physically mixed with oxacillin but should be administered separately. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Do not add supplementary medication to Oxacillin for Injection, USP. Directions for Use For Intramuscular Use Use Sterile Water for Injection, USP. Add 5.7 mL to the 1 gram vial and 11.5 mL to the 2 gram vial. Shake well until a clear solution is obtained. After reconstitution, vials will contain 250 mg of active drug per 1.5 mL of solution. The reconstituted solution is stable for 3 days at 70°F or for one week under refrigeration (40°F). For Direct Intravenous Use Use Sterile Water for Injection, USP or Sodium Chloride Injection, USP. Add 10 mL to the 1 gram vial and 20 mL to the 2 gram vial. Withdraw the entire contents and administer slowly over a period of approximately 10 minutes. For Administration by Intravenous Drip Reconstitute as directed above (For Direct Intravenous Use) prior to diluting with Intravenous Solution. STABILITY PERIODS FOR OXACILLIN FOR INJECTION, USP Concentration mg/mL Sterile Water for Injection, USP 0.9% Sodium Chloride Injection, USP M/6 Molar Sodium Lactate Solution 5% Dextrose in Water 5% Dextrose in 0.45% Sodium Chloride 10% Invert Sugar Injection, USP Lactated Ringers Solution ROOM TEMPERATURE (25°C) 10 to 100 4 Days 4 Days 10 to 30 24 Hrs 24 Hrs 0.5 to 2 6 Hrs 6 Hrs 6 Hrs REFRIGERATION (4°C) 10 to 100 7 Days 7 Days 10 to 30 4 Days 4 Days 4 Days 4 Days 4 Days FROZEN (-15°C) 50 to 100 30 Days 250/1.5 mL 30 Days 100 30 Days 10 to 100 30 Days 30 Days 30 Days 30 Days 30 Days Stability studies on oxacillin sodium at concentrations of 0.5 mg/mL and 2 mg/mL in various intravenous solutions listed below indicate the drug will lose less than 10% activity at room temperature (70°F) during a 6-hour period. IV Solution 5% Dextrose in Normal Saline 10% Invert Sugar in Normal Saline 10% Invert Sugar Plus 0.3% Potassium Chloride in Water Only those solutions listed above should be used for the intravenous infusion of oxacillin sodium. The concentration of the antibiotic should fall within the range specified. The drug concentration and the rate and volume of the infusion should be adjusted so that the total dose of oxacillin is administered before the drug loses its stability in the solution in use. If another agent is used in conjunction with oxacillin therapy, it should not be physically mixed with oxacillin but should be administered separately. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Do not add supplementary medication to Oxacillin for Injection, USP.

Warnings & Precautions
WARNINGS: Serious and occasionally fatal hypersensitivity (anaphylactic shock with collapse) reactions have occurred in patients receiving penicillin. The incidence of anaphylactic shock in all penicillin-treated patients is between 0.015 and 0.04 percent. Anaphylactic shock resulting in death has occurred in approximately 0.002 percent of the patients treated. When oxacillin therapy is indicated, it should be initiated only after a comprehensive patient drug and allergy history has been obtained. If an allergic reaction occurs, oxacillin should be discontinued and appropriate therapy instituted. Clostridium difficile associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including Oxacillin for Injection, USP, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile . C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin-producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibiotic use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents. If CDAD is suspected or confirmed, ongoing antibiotic use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibiotic treatment of C. difficile, and surgical evaluation should be instituted as clinically indicated.
Contraindications

: A history of a hypersensitivity (anaphylactic) reaction to any penicillin is a contraindication.

Adverse Reactions

Body as a Whole The reported incidence of allergic reactions to penicillin ranges from 0.7 to 10 percent (see WARNINGS ). Sensitization is usually the result of treatment but some individuals have had immediate reactions to penicillin when first treated. In such cases, it is thought that the patients may have had prior exposure to the drug via trace amounts present in milk and vaccines. Two types of allergic reactions to penicillin are noted clinically, immediate and delayed. Immediate reactions usually occur within 20 minutes of administration and range in severity from urticaria and pruritus to angioneurotic edema, laryngospasm, bronchospasm, hypotension, vascular collapse, and death. Such immediate anaphylactic reactions are very rare (see WARNINGS ) and usually occur after parenteral therapy but have occurred in patients receiving oral therapy. Another type of immediate reaction, an accelerated reaction, may occur between 20 minutes and 48 hours after administration and may include urticaria, pruritus, and fever. Although laryngeal edema, laryngospasm, and hypotension occasionally occur, fatality is uncommon. Delayed allergic reactions to penicillin therapy usually occur after 48 hours and sometimes as late as 2 to 4 weeks after initiation of therapy. Manifestations of this type of reaction include serum sickness-like symptoms (i.e., fever, malaise, urticaria, myalgia, arthralgia, abdominal pain) and various skin rashes. Nausea, vomiting, diarrhea, stomatitis, black or hairy tongue, and other symptoms of gastrointestinal irritation may occur, especially during oral penicillin therapy. Nervous System Reactions Neurotoxic reactions similar to those observed with penicillin G may occur with large intravenous doses of oxacillin especially with patients with renal insufficiency. Urogenital Reactions Renal tubular damage and interstitial nephritis have been associated with the administration of oxacillin. Manifestations of this reaction may include rash, fever, eosinophilia, hematuria, proteinuria, and renal insufficiency. Nephropathy induced by penicillins does not appear to be dose-related and is generally reversible upon prompt discontinuation of therapy. Gastrointestinal Reactions Pseudomembranous colitis has been reported with the use of oxacillin. The onset of pseudomembranous colitis symptoms may occur during or after antibiotic treatment (see WARNINGS ). Metabolic Reactions Agranulocytosis, neutropenia, and bone marrow depression have been associated with the use of oxacillin. Hepatotoxicity, characterized by fever, nausea, and vomiting associated with abnormal liver function tests, mainly elevated SGOT levels, has been associated with the use of oxacillin. To report SUSPECTED ADVERSE REACTIONS, contact Fresenius Kabi USA, LLC at 1-800-551-7176 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. Body as a Whole The reported incidence of allergic reactions to penicillin ranges from 0.7 to 10 percent (see WARNINGS ). Sensitization is usually the result of treatment but some individuals have had immediate reactions to penicillin when first treated. In such cases, it is thought that the patients may have had prior exposure to the drug via trace amounts present in milk and vaccines. Two types of allergic reactions to penicillin are noted clinically, immediate and delayed. Immediate reactions usually occur within 20 minutes of administration and range in severity from urticaria and pruritus to angioneurotic edema, laryngospasm, bronchospasm, hypotension, vascular collapse, and death. Such immediate anaphylactic reactions are very rare (see WARNINGS ) and usually occur after parenteral therapy but have occurred in patients receiving oral therapy. Another type of immediate reaction, an accelerated reaction, may occur between 20 minutes and 48 hours after administration and may include urticaria, pruritus, and fever. Although laryngeal edema, laryngospasm, and hypotension occasionally occur, fatality is uncommon. Delayed allergic reactions to penicillin therapy usually occur after 48 hours and sometimes as late as 2 to 4 weeks after initiation of therapy. Manifestations of this type of reaction include serum sickness-like symptoms (i.e., fever, malaise, urticaria, myalgia, arthralgia, abdominal pain) and various skin rashes. Nausea, vomiting, diarrhea, stomatitis, black or hairy tongue, and other symptoms of gastrointestinal irritation may occur, especially during oral penicillin therapy. Nervous System Reactions Neurotoxic reactions similar to those observed with penicillin G may occur with large intravenous doses of oxacillin especially with patients with renal insufficiency. Urogenital Reactions Renal tubular damage and interstitial nephritis have been associated with the administration of oxacillin. Manifestations of this reaction may include rash, fever, eosinophilia, hematuria, proteinuria, and renal insufficiency. Nephropathy induced by penicillins does not appear to be dose-related and is generally reversible upon prompt discontinuation of therapy. Gastrointestinal Reactions Pseudomembranous colitis has been reported with the use of oxacillin. The onset of pseudomembranous colitis symptoms may occur during or after antibiotic treatment (see WARNINGS ). Metabolic Reactions Agranulocytosis, neutropenia, and bone marrow depression have been associated with the use of oxacillin. Hepatotoxicity, characterized by fever, nausea, and vomiting associated with abnormal liver function tests, mainly elevated SGOT levels, has been associated with the use of oxacillin. To report SUSPECTED ADVERSE REACTIONS, contact Fresenius Kabi USA, LLC at 1-800-551-7176 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.


Similar Drugs

Related medications based on brand, generic name, substance, active ingredients.

View all similar drugs →