Ammonia N-13 AMMONIA N 13 CARDINAL HEALTH 414, LLC FDA Approved 11.1 Chemical Characteristics Ammonia N-13 Injection, USP is a positron emitting radiopharmaceutical that is used for diagnostic purposes in conjunction with positron emission tomography (PET) imaging. The active ingredient, [ 13 N] ammonia, has the molecular formula of 13 NH 3 with a molecular weight of 16.02, and has the following chemical structure: Ammonia N-13 Injection, USP is provided as a ready to use sterile, pyrogen-free, clear and colorless solution. Each mL of the solution contains between 0.138 GBq to 1.387 GBq (3.75 mCi to 37.5 mCi) of [ 13 N] ammonia, at the end of synthesis (EOS) reference time, in 0.9% aqueous sodium chloride. The pH of the solution is between 4.5 to 7.5. The recommended dose of radioactivity (10-20 mCi) is associated with a theoretical mass dose of 0.5-1.0 picomoles of ammonia. Chemical Structure 11.2 Physical Characteristics Nitrogen N-13 decays by emitting positron to Carbon C-13 (stable) and has a physical half-life of 9.96 minutes. The principal photons useful for imaging are the dual 511 keV gamma photons that are produced and emitted simultaneously in opposite direction when the positron interacts with an electron (Table 2). Table 2: Principal Radiation Emission Data for Nitrogen 13 Radiation/Emission % Per Disintegration Energy Positron(β+) 100 1190 keV (Max.) Gamma(±) Produced by positron annihilation. 200 511.0 keV The specific gamma ray constant (point source air kerma coefficient) for nitrogen N-13 is 5.9 R/hr/mCi (1.39 x 10 -6 Gy/hr/kBq) at 1 cm. The half-value layer (HVL) of lead (Pb) for 511 keV photons is 4 mm, or 2.9 mm tungsten (W) alloy. Selected coefficients of attenuation are listed in Table 3 as a function of lead shield thickness. For example, the use of 39 mm thickness of lead or 28 mm of tungsten alloy will attenuate the external radiation by a factor of about 1000. Table 3: Radiation Attenuation of 511 keV Photons by Lead (Pb) Shielding Shield Thickness (Pb) mm Shield Thickness (W) Alloy mm Coefficient of Attenuation 0 0 0.00 4 2.9 0.50 8 5.8 0.25 13 9.4 0.10 26 18.7 0.01 39 27.6 0.001 Table 4 lists fractions remaining at selected time intervals from the calibration time. This information may be used to correct for physical decay of the radionuclide. Table 4: Physical Decay Chart for Nitrogen N-13 Minutes Fraction Remaining 0 calibration time 1.000 5 0.706 10 0.499 15 0.352 20 0.249 25 0.176 30 0.124 60 0.016
FunFoxMeds bottle
Substance Ammonia N 13
Route
INTRAVENOUS
Applications
ANDA203700
Package NDC

Drug Facts

Composition & Profile

Dosage Forms
Injection
Strengths
10 ml 0.9 % 8 ml
Quantities
10 ml 8 ml 13 count
Treats Conditions
1 Indications And Usage Ammonia N 13 Injection Usp Is Indicated For Diagnostic Positron Emission Tomography Pet Imaging Of The Myocardium Under Rest Or Pharmacologic Stress Conditions To Evaluate Myocardial Perfusion In Patients With Suspected Or Existing Coronary Artery Disease Ammonia N 13 Injection Usp Is A Radioactive Diagnostic Agent For Positron Emission Tomography Pet Indicated For Diagnostic Pet Imaging Of The Myocardium Under Rest Or Pharmacologic Stress Conditions To Evaluate Myocardial Perfusion In Patients With Suspected Or Existing Coronary Artery Disease 1

Identifiers & Packaging

Container Type BOTTLE
All Product Codes
UNII
9OQO0E343Z
Packaging

16 HOW SUPPLIED/STORAGE AND HANDLING Ammonia N-13 Injection, USP is packaged in 10 mL multiple dose glass vial containing between 1.11–11.1 GBq (30–300 mCi/mL) of [ 13 N] ammonia, at the end of synthesis (EOS) reference time, in 0.9% sodium chloride injection solution in approximately 8 mL to 10 mL volume. The recommended dose of radioactivity (10-20 mCi) is associated with a theoretical mass dose of 0.5-1.0 picomoles of Ammonia. NDC 65857-200-10 Storage Store at 25°C (77°F); excursions permitted to 15-30°C (59-86°F). Use the solution within 60 minutes of the End of Synthesis (EOS) calibration.; PRINCIPAL DISPLAY PANEL - CARTON LABEL Carton Label NDC # 65857-200-10 Multiple-Dose Vial Ammonia N-13 Injection, USP 3.75 mCi/mL to 37.5 mCi/mL @ EOS* Activity @ EOS*: Total:________mCi Volume:__________mL Concentration:_____________mCi/mL Sterile, Non-pyrogenic Diagnostic - For Intravenous Use Only Calibration (EOS*) Time:____________ Exp. Date/Time:_____/_____/_____ Calibration Date:_____/_____/_____ Lot #:__________________ (Expires 60 minutes after EOS*) Each mL Contains: 0.138 GBq to 1.387 GBq (3.75 mCi/mL to 37.5 mCi/mL) of no-carrier added Ammonia N-13 @ EOS* in 0.9% Sodium Chloride Injection. Do not use if cloudy or if it contains particulate matter. *EOS = End of Synthesis CAUTION: RADIOACTIVE MATERIAL Store at 25°C (77°F) (see insert) Store upright in a shielded container. Aseptically withdraw and handle doses. [ 13 N] Half-Life = 9.96 minutes. Calculate correct dosage from date and time of calibration. Manufactured and Distributed by: Cardinal Health 414, LLC 7000 Cardinal Place, Dublin, OH 43017 Rx ONLY Principal Display Panel - Carton Label

Package Descriptions
  • 16 HOW SUPPLIED/STORAGE AND HANDLING Ammonia N-13 Injection, USP is packaged in 10 mL multiple dose glass vial containing between 1.11–11.1 GBq (30–300 mCi/mL) of [ 13 N] ammonia, at the end of synthesis (EOS) reference time, in 0.9% sodium chloride injection solution in approximately 8 mL to 10 mL volume. The recommended dose of radioactivity (10-20 mCi) is associated with a theoretical mass dose of 0.5-1.0 picomoles of Ammonia. NDC 65857-200-10 Storage Store at 25°C (77°F); excursions permitted to 15-30°C (59-86°F). Use the solution within 60 minutes of the End of Synthesis (EOS) calibration.
  • PRINCIPAL DISPLAY PANEL - CARTON LABEL Carton Label NDC # 65857-200-10 Multiple-Dose Vial Ammonia N-13 Injection, USP 3.75 mCi/mL to 37.5 mCi/mL @ EOS* Activity @ EOS*: Total:________mCi Volume:__________mL Concentration:_____________mCi/mL Sterile, Non-pyrogenic Diagnostic - For Intravenous Use Only Calibration (EOS*) Time:____________ Exp. Date/Time:_____/_____/_____ Calibration Date:_____/_____/_____ Lot #:__________________ (Expires 60 minutes after EOS*) Each mL Contains: 0.138 GBq to 1.387 GBq (3.75 mCi/mL to 37.5 mCi/mL) of no-carrier added Ammonia N-13 @ EOS* in 0.9% Sodium Chloride Injection. Do not use if cloudy or if it contains particulate matter. *EOS = End of Synthesis CAUTION: RADIOACTIVE MATERIAL Store at 25°C (77°F) (see insert) Store upright in a shielded container. Aseptically withdraw and handle doses. [ 13 N] Half-Life = 9.96 minutes. Calculate correct dosage from date and time of calibration. Manufactured and Distributed by: Cardinal Health 414, LLC 7000 Cardinal Place, Dublin, OH 43017 Rx ONLY Principal Display Panel - Carton Label

Overview

11.1 Chemical Characteristics Ammonia N-13 Injection, USP is a positron emitting radiopharmaceutical that is used for diagnostic purposes in conjunction with positron emission tomography (PET) imaging. The active ingredient, [ 13 N] ammonia, has the molecular formula of 13 NH 3 with a molecular weight of 16.02, and has the following chemical structure: Ammonia N-13 Injection, USP is provided as a ready to use sterile, pyrogen-free, clear and colorless solution. Each mL of the solution contains between 0.138 GBq to 1.387 GBq (3.75 mCi to 37.5 mCi) of [ 13 N] ammonia, at the end of synthesis (EOS) reference time, in 0.9% aqueous sodium chloride. The pH of the solution is between 4.5 to 7.5. The recommended dose of radioactivity (10-20 mCi) is associated with a theoretical mass dose of 0.5-1.0 picomoles of ammonia. Chemical Structure 11.2 Physical Characteristics Nitrogen N-13 decays by emitting positron to Carbon C-13 (stable) and has a physical half-life of 9.96 minutes. The principal photons useful for imaging are the dual 511 keV gamma photons that are produced and emitted simultaneously in opposite direction when the positron interacts with an electron (Table 2). Table 2: Principal Radiation Emission Data for Nitrogen 13 Radiation/Emission % Per Disintegration Energy Positron(β+) 100 1190 keV (Max.) Gamma(±) Produced by positron annihilation. 200 511.0 keV The specific gamma ray constant (point source air kerma coefficient) for nitrogen N-13 is 5.9 R/hr/mCi (1.39 x 10 -6 Gy/hr/kBq) at 1 cm. The half-value layer (HVL) of lead (Pb) for 511 keV photons is 4 mm, or 2.9 mm tungsten (W) alloy. Selected coefficients of attenuation are listed in Table 3 as a function of lead shield thickness. For example, the use of 39 mm thickness of lead or 28 mm of tungsten alloy will attenuate the external radiation by a factor of about 1000. Table 3: Radiation Attenuation of 511 keV Photons by Lead (Pb) Shielding Shield Thickness (Pb) mm Shield Thickness (W) Alloy mm Coefficient of Attenuation 0 0 0.00 4 2.9 0.50 8 5.8 0.25 13 9.4 0.10 26 18.7 0.01 39 27.6 0.001 Table 4 lists fractions remaining at selected time intervals from the calibration time. This information may be used to correct for physical decay of the radionuclide. Table 4: Physical Decay Chart for Nitrogen N-13 Minutes Fraction Remaining 0 calibration time 1.000 5 0.706 10 0.499 15 0.352 20 0.249 25 0.176 30 0.124 60 0.016

Indications & Usage

Ammonia N-13 Injection, USP is indicated for diagnostic Positron Emission Tomography (PET) imaging of the myocardium under rest or pharmacologic stress conditions to evaluate myocardial perfusion in patients with suspected or existing coronary artery disease. Ammonia N-13 Injection, USP is a radioactive diagnostic agent for Positron Emission Tomography (PET) indicated for diagnostic PET imaging of the myocardium under rest or pharmacologic stress conditions to evaluate myocardial perfusion in patients with suspected or existing coronary artery disease ( 1 ).

Dosage & Administration

Rest Imaging Study ( 2.1 ): • Aseptically withdraw Ammonia N-13 Injection, USP from its container and administer 10-20 mCi (0.368 – 0.736 GBq) as a bolus through a catheter inserted into a large peripheral vein. • Start imaging 3 minutes after the injection and acquire images for a total of 10-20 minutes. Stress Imaging Study ( 2.2 ): • If a rest imaging study is performed, begin the stress imaging study 40 minutes or more after the first Ammonia N-13 Injection, USP to allow sufficient isotope decay. • Administer a pharmacologic stress-inducing drug in accordance with its labeling. • Aseptically withdraw Ammonia N-13 Injection, USP from its container and administer 10-20 mCi (0.368 – 0.736 GBq) of Ammonia N-13 Injection, USP as a bolus at 8 minutes after the administration of the pharmacologic stress-inducing drug. • Start imaging 3 minutes after the Ammonia N-13 Injection, USP and acquire images for a total of 10-20 minutes. Patient Preparation ( 2.3 ): • To increase renal clearance of radioactivity and to minimize radiation dose to the bladder, hydrate the patient before the procedure and encourage voiding as soon as each image acquisition is completed and as often as possible thereafter for at least one hour. 2.1 Rest Imaging Study • Aseptically withdraw Ammonia N-13 Injection, USP from its container and administer 10-20 mCi (0.368 – 0.736 GBq) as a bolus through a catheter inserted into a large peripheral vein. • Start imaging 3 minutes after the injection and acquire images for a total of 10-20 minutes. 2.2 Stress Imaging Study • If a rest imaging study is performed, begin the stress imaging study 40 minutes or more after the first Ammonia N-13 Injection, USP to allow sufficient isotope decay. • Administer a pharmacologic stress-inducing drug in accordance with its labeling. • Aseptically withdraw Ammonia N-13 Injection, USP from its container and administer 10-20 mCi (0.368 – 0.736 GBq) of Ammonia N-13 Injection, USP as a bolus at 8 minutes after the administration of the pharmacologic stress-inducing drug. • Start imaging 3 minutes after the Ammonia N-13 Injection, USP and acquire images for a total of 10-20 minutes. 2.3 Patient Preparation To increase renal clearance of radioactivity and to minimize radiation dose to the bladder, ensure that the patient is well hydrated before the procedure and encourage voiding as soon as a study is completed and as often as possible thereafter for at least one hour. 2.4 Radiation Dosimetry The converted radiation absorbed doses in rem/mCi are shown in Table 1. These estimates are calculated from the Task Group of Committee 2 of the International Commission on Radiation Protection. 1 Table 1: N-13 Absorbed Radiation Dose Per Unit Activity (rem/mCi) for Adults and Pediatric Groups * Upper large intestine; ** Lower large intestine Organ Adult 15-year old 10-year old 5-year old 1-year old Adrenals 0.0085 0.0096 0.016 0.025 0.048 Bladder wall 0.030 0.037 0.056 0.089 0.17 Bone surfaces 0.0059 0.0070 0.011 0.019 0.037 Brain 0.016 0.016 0.017 0.019 0.027 Breast 0.0067 0.0067 0.010 0.017 0.033 Stomach wall 0.0063 0.0078 0.012 0.019 0.037 Small intestine 0.0067 0.0081 00013 0.021 0.041 *ULI 0.0067 0.0078 0.013 0.021 0.037 **LLI 0.0070 0.0078 0.013 0.020 0.037 Heart 0.0078 0.0096 0.015 0.023 0.041 Kidneys 0.017 0.021 0.031 0.048 0.089 Liver 0.015 0.018 0.029 0.044 0.085 Lungs 0.0093 0.011 0.018 0.029 0.056 Ovaries 0.0063 0.0085 0.014 0.021 0.041 Pancreas 0.0070 0.0085 0.014 0.021 0.041 Red marrow 0.0063 0.0078 0.012 0.020 0.037 Spleen 0.0093 0.011 0.019 0.030 0.056 Testes 0.0067 0.0070 0.011 0.018 0.035 Thyroid 0.0063 0.0081 0.013 0.021 0.041 Uterus 0.0070 0.0089 0.014 0.023 0.041 Other tissues 0.0059 0.0070 0.011 0.018 0.035 2.5 Drug Handling • Inspect Ammonia N-13 Injection, USP visually for particulate matter and discoloration before administration, whenever solution and container permit. • Do not administer Ammonia N-13 Injection, USP containing particulate matter or discoloration; dispose of these unacceptable or unused preparations in a safe manner, in compliance with applicable regulations. • Wear waterproof gloves and effective shielding when handling Ammonia N-13 Injection, USP. • Use aseptic technique to maintain sterility during all operations involved in the manipulation and administration of Ammonia N-13 Injection, USP. The contents of each vial are sterile and non-pyrogenic. • Use appropriate safety measures, including shielding, consistent with proper patient management to avoid unnecessary radiation exposure to the patient, occupational workers, clinical personnel, and other persons. • Radiopharmaceuticals should be used by or under the control of physicians who are qualified by specific training and experience in the safe use and handling of radionuclides, and whose experience and training have been approved by the appropriate governmental agency authorized to license the use of radionuclides. • Before administration of Ammonia N-13 Injection, USP, assay the dose in a properly calibrated dose calibrator.

Warnings & Precautions
Ammonia N-13 Injection, USP may increase the risk of cancer. Use the smallest dose necessary for imaging and ensure safe handling to protect the patient and health care worker ( 5 ). 5.1 Radiation Risks Ammonia N-13 Injection, USP may increase the risk of cancer. Use the smallest dose necessary for imaging and ensure safe handling to protect the patient and health care worker [see Dosage and Administration ( 2.4 )] .
Contraindications

None None ( 4 )

Adverse Reactions

No adverse reactions have been reported for Ammonia N-13 Injection, USP based on a review of the published literature, publicly available reference sources, and adverse drug reaction reporting systems. However, the completeness of these sources is not known. No adverse reactions have been reported for Ammonia N-13 Injection, USP based on a review of the published literature, publicly available reference sources, and adverse drug reaction reporting system ( 6 ). To report SUSPECTED ADVERSE REACTIONS, contact Cardinal Health at 1-800-618-2768 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch

Drug Interactions

The possibility of interactions of Ammonia N-13 Injection, USP with other drugs taken by patients undergoing PET imaging has not been studied.


Similar Drugs

Related medications based on brand, generic name, substance, active ingredients.

View all similar drugs →