verapamil hydrochloride - Medications
Browse 92 medications containing verapamil hydrochloride. Open a product record to review formulation details, related brands, manufacturers, and label-backed information.
Trandolapril and verapamil hydrochloride extended-release tablets combine a slow release formulation of a calcium channel blocker, verapamil hydrochloride, USP, and an immediate release formulation of an angiotensin converting enzyme inhibitor, trandolapril, USP. Verapamil Component Verapamil hydrochloride, USP is chemically described as benzeneacetonitrile, α [3-[[2-(3,4-dimethoxyphenyl) -ethyl] methylamino] propyl] -3,4-dimethoxy-α -(1-methylethyl)-, monohydrochloride, (±). Its molecular formula is C 27 H 38 N 2 O 4 • HCl and its structural formula is: Verapamil hydrochloride, USP is a white or practically white crystalline powder, with a molecular weight of 491.06 g/mol. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. It is practically odorless and has a bitter taste. verapamil-structure Trandolapril Component Trandolapril, USP is the ethyl ester prodrug of a nonsulfhydryl angiotensin converting enzyme (ACE) inhibitor, trandolaprilat. It is chemically described as (2S,3aR,7aS)- 1- [(S)-2-[[(S)-1-(EthoxyCarbonyl)-3-phenylpropyl] amino]Propanoyl]octahydro-1H-indole-2-carboxylic acid. Its molecular formula is C 24 H 34 N 2 O 5 and its structural formula is: Trandolapril, USP is a white or almost white powder with a molecular weight of 430.54 g/mol. It is practically insoluble in water; freely soluble in methylene chloride; sparingly soluble in absolute alcohol. Trandolapril and verapamil hydrochloride extended-release tablets are formulated for oral administration, containing verapamil hydrochloride, USP as a controlled release formulation and trandolapril, USP as an immediate release formulation. The tablet strengths are trandolapril and verapamil hydrochloride extended-release tablets 1 mg/240 mg, trandolapril and verapamil hydrochloride extended-release tablets 2 mg/180 mg, trandolapril and verapamil hydrochloride extended-release tablets 2 mg/240 mg, and trandolapril and verapamil hydrochloride extended-release tablets 4 mg/240 mg. The tablets also contain the following ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, ferric oxide red, hypromellose, lactose monohydrate, povidone, sodium alginate, sodium stearyl fumarate, magnesium stearate, and microcrystalline cellulose. The film coating contains: 1 mg/240 mg – hypromellose, titanium dioxide, and polyethylene glycol; 2 mg/180 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide red, and FD&C blue #2; 2 mg/240 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, iron oxide black, and iron oxide red; 4 mg/240 mg – hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, iron oxide red, and iron oxide black. trandolapril-structure
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. STRUCTURE
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C27H38N2O4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. STRUCTURE
Verapamil hydrochloride is a calcium antagonist or slow channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, clear colorless solution and is available in 5 mg/2 mL and 10 mg/4 mL single-dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil hydrochloride, USP and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of solution is between 4.0 and 6.5. Protect contents from light. Verapamil hydrochloride injection, USP vials are sterile. The structural formula of verapamil hydrochloride is given below: The chemical name of verapamil hydrochloride is Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride, USP is white or practically white, crystalline powder. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol, practically insoluble in ether. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. STRUCTURE
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C27H38N2O4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. STRUCTURE
Verapamil Hydrochloride Extended-release Capsules (PM) is a calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil Hydrochloride Extended-release Capsules (PM) is available for oral administration as a 100 mg hard gelatin capsule (white opaque cap/amethyst body), a 200 mg hard gelatin capsule (amethyst opaque cap/amethyst body), and as a 300 mg hard gelatin capsule (lavender opaque cap/amethyst body). Verapamil is administered as a racemic mixture of the R and S enantiomers. The structural formulae of the verapamil HCl enantiomers are: C 27 H 38 N 2 O 4 ∙HCl M.W.=491.07 Chemical name: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]- 3,4-dimethoxy-α-(1-methylethyl)-, monohydrochloride,(±)-. Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not structurally related to other cardioactive drugs. In addition to verapamil HCl the Verapamil Hydrochloride Extended-release Capsules (PM) capsule contains the following inactive ingredients: D&C Red #28, FD & C Blue #1, FD&C red #40, fumaric acid, gelatin, povidone, shellac, silicon dioxide, sodium lauryl sulfate, starch, sugar spheres, talc, and titanium dioxide. Chemical Structure System Components and Performance: Verapamil Hydrochloride Extended-release Capsules (PM) uses the proprietary CODAS ® (Chronotherapeutic Oral Drug Absorption System) technology, which is designed for bedtime dosing, incorporating a 4 to 5-hour delay in drug delivery. The controlled-onset delivery system results in a maximum plasma concentration (C max ) of verapamil in the morning hours. These pellet filled capsules provide for extended-release of the drug in the gastrointestinal tract. The Verapamil Hydrochloride Extended-release Capsules (PM) formulation has been designed to initiate the release of verapamil 4-5 hours after ingestion. This delay is introduced by the level of non-enteric release-controlling polymer applied to drug loaded beads. The release-controlling polymer is a combination of water soluble and water insoluble polymers. As water from the gastrointestinal tract comes into contact with the polymer coated beads, the water soluble polymer slowly dissolves and the drug diffuses through the resulting pores in the coating. The water insoluble polymer continues to act as a barrier, maintaining the controlled release of the drug. The rate of release is essentially independent of pH, posture and food. Multiparticulate systems such as Verapamil Hydrochloride Extended-release Capsules (PM) have been shown to be independent of gastrointestinal motility.
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4- dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.06 Molecular formula: C 27 H 38 N 2 O 4 · HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. structure
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Image
Verapamil hydrochloride sustained-release capsules are calcium ion influx inhibitors (slow channel blockers or calcium ion antagonists). Verapamil hydrochloride sustained-release capsules are available for oral administration as a 360 mg hard gelatin capsule (lavender cap/yellow body), a 240 mg hard gelatin capsule (dark blue cap/yellow body), a 180 mg hard gelatin capsule (light grey cap/yellow body), and a 120 mg hard gelatin capsule (yellow cap/yellow body). These pellet-filled capsules provide a sustained-release of the drug in the gastrointestinal tract. The structural formula of verapamil HCl is given below: C 27 H 38 N 2 O 4 •HCl M.W. 491.07 Chemical name: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)-ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride. Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not structurally related to other cardioactive drugs. In addition to verapamil HCl the verapamil hydrochloride sustained-release capsules contain the following inactive ingredients: fumaric acid, talc, sugar spheres, povidone, shellac, gelatin, FD&C red #40, yellow iron oxide, titanium dioxide, methylparaben, propylparaben, silicon dioxide, and sodium lauryl sulfate. In addition, the verapamil hydrochloride sustained-release capsules 240 mg and 360 mg capsules contain FD&C blue #1 and D&C red #28; and the verapamil hydrochloride sustained-release capsules 180 mg contain black iron oxide. verapamil hydrochloride structural formula
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride extended-release capsules, USP are a calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release capsules are available for oral administration as a 120 mg hard gelatin capsule (bluish green opaque cap and white opaque body), a 180 mg hard gelatin capsule (bluish green opaque cap and light green opaque body) and a 240 mg hard gelatin capsule (bluish green opaque cap and bluish green opaque body). These bead filled capsules provide an extended-release of the drug in the gastrointestinal tract. The structural formula of verapamil HCl is given below: Chemical name: (±)-5-[(3,4-Dimethoxyphenethyl)methylamino]-2-(3,4-dimethoxyphenyl)-2-isopropylvaleronitrile monohydrochloride. Verapamil HCl, USP is a white or almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not structurally related to other cardioactive drugs. In addition to verapamil HCl the verapamil hydrochloride extended-release capsules contain the following inactive ingredients: ammonium hydroxide, dibutyl sebacate, diethyl phthalate, ethylcellulose, FD&C Green No. 3, gelatin, hypromellose, maltodextrin, methacrylic acid copolymer Type A and B, oleic acid, polyethylene glycol, povidone, silicon dioxide, sodium lauryl sulfate, sugar spheres (which contain cornstarch and sucrose), talc and titanium dioxide, the 180 mg capsules also contain D&C Yellow No. 10. In addition, the black imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Verapamil Hydrochloride Structural Formula
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP, 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.9 (4.0 to 6.5). The chemical name of verapamil hydrochloride is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride (±)-. Verapamil hydrochloride, USP is white or practically white crystalline powder. It is practically odorless and has a bitter taste with a molecular formula C 27 H 38 N 2 O 4 •HCl, and a molecular weight of 491.06 g/mol. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. 1
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, oval shaped, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: C27H38N2O4 ∙ HCl M.W.=491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 180 mg and 240 mg meet USP Dissolution Test 3. Chemical Structure
Verapamil hydrochloride is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg, or 120 mg of verapamil hydrochloride. The structural formula of verapamil hydrochloride is: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other cardioactive drugs. Inactive ingredients include anhydrous lactose, corn starch, hypromellose 2910, magnesium stearate, microcrystalline cellulose, polacrilin potassium, and polyethylene glycol 400. In addition the following coloring agents are used: FD&C Yellow No. 6 Aluminum Lake, hydroxypropyl cellulose and titanium dioxide (40 mg light peach); hydroxypropyl cellulose and titanium dioxide (80 mg white and 120 mg white).
Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below: C 27 H 38 N 2 O 4 ·HCl..........M.W. 491.06 Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. Structure of Verapamil Hydrochloride
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl}methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. verapamil1
Verapamil hydrochloride (verapamil HCl) tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg or 120 mg of verapamil hydrochloride. The structural formula of verapamil HCl is: C 27 H 38 N 2 O 4 • HCl M.W. = 491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, light mineral oil, sodium lauryl sulfate, titanium dioxide and hypromellose. Image
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2- (3,4-dimethoxyphenyl) ethyl} methylamino]propyl] -3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. structural-formula-verapamil
Verapamil Hydrochloride is calcium antagonist or slow channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL and 10 mg/4 mL single dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil HCl and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is 4.9 (4.0 to 6.5). Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil HCl USP is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil HCl USP is an almost white, crystalline powder practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not chemically related to other antiarrhythmic drugs. Structure
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. structural formula verapamil hydrochloride
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2- (3,4-dimethoxyphenyl) ethyl} methylamino]propyl] -3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. structural-formula-verapamil
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) vials. Each vial contains Verapamil hydrochloride 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of Verapamil HCl is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxyα-(1-methylethyl) hydrochloride Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. image description
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.0. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4- dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. verapamil-structure
Verapamil Hydrochloride is calcium antagonist or slow channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL and 10 mg/4 mL single dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil HCl and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is 4.9 (4.0 to 6.5). Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil HCl USP is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 HCl Verapamil HCl USP is an almost white, crystalline powder practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not chemically related to other antiarrhythmic drugs. Structure
Verapamil hydrochloride is a calcium antagonist or slow channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, clear colorless solution and is available in 5 mg/2 mL and 10 mg/4 mL single-dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil hydrochloride, USP and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of solution is between 4.0 and 6.5. Protect contents from light. Verapamil hydrochloride injection, USP vials are sterile. The structural formula of verapamil hydrochloride is given below: The chemical name of verapamil hydrochloride is Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride, USP is white or practically white, crystalline powder. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol, practically insoluble in ether. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Chemical Structure
Verapamil hydrochloride (verapamil HCl) tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg or 120 mg of verapamil hydrochloride. The structural formula of verapamil HCl is: C 27 H 38 N 2 O 4 • HCl M.W. = 491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, light mineral oil, sodium lauryl sulfate, titanium dioxide and hypromellose.
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below: C 27 H 38 N 2 O 4 ·HCl..........M.W. 491.06 Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. Structure of Verapamil Hydrochloride
Verapamil Hydrochloride is calcium antagonist or slow channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL and 10 mg/4 mL single dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil HCl and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is 4.9 (4.0 to 6.5). Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil HCl USP is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil HCl USP is an almost white, crystalline powder practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not chemically related to other antiarrhythmic drugs. Structure
Verapamil Hydrochloride is calcium antagonist or slow channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL and 10 mg/4 mL single dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil HCl and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is 4.9 (4.0 to 6.5). Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil HCl USP is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 HCl Verapamil HCl USP is an almost white, crystalline powder practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not chemically related to other antiarrhythmic drugs. Structure
Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below: C 27 H 38 N 2 O 4 ·HCl..........M.W. 491.06 Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. Structure of Verapamil Hydrochloride
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, oval shaped, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: C 27 H 38 N 2 O 4 ∙ HCl M.W.=491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 180 mg and 240 mg meet USP Dissolution Test 3. Chemical Structure
Verapamil hydrochloride is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg, or 120 mg of verapamil hydrochloride. The structural formula of verapamil hydrochloride is: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other cardioactive drugs. Inactive ingredients include anhydrous lactose, corn starch, hypromellose 2910, magnesium stearate, microcrystalline cellulose, polacrilin potassium, and polyethylene glycol 400. In addition the following coloring agents are used: FD&C Yellow No. 6 Aluminum Lake, hydroxypropyl cellulose and titanium dioxide (40 mg light peach); hydroxypropyl cellulose and titanium dioxide (80 mg white and 120 mg white). The structural formula of verapamil hydrochloride
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL single dose vials (for intravenous administration). Each 1 mL of solution contains verapamil hydrochloride 2.5 mg and sodium chloride 8.5 mg in water for injection. Hydrochloric acid and/or sodium hydroxide are used for pH adjustment. The pH of the solution is between 4.0 to 6.5. Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil hydrochloride is given below: C 27 H 38 N 2 O 4 •HCl M.W. 491.07 α-[3-[2-(3,4-dimethoxyphenyl) ethyl]methylaminopropyl]-3,4-dimethoxy-1(methylethyl) benzene acetonitrile monohydrochloride Verapamil hydrochloride, USP is white or almost white crystalline powder. It is practically odorless and has a bitter taste. It is freely soluble in chloroform. It is soluble in water, sparingly soluble in alcohol and practically insoluble in ether. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Structural Formula of Verapamil Hydrochloride
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. structural formula verapamil hydrochloride
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg, or 120 mg of verapamil hydrochloride, USP. The structural formula of verapamil hydrochloride, USP is: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil hydrochloride, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride, USP is not chemically related to other cardioactive drugs. Inactive ingredients include anhydrous lactose, corn starch, hypromellose 2910, magnesium stearate, microcrystalline cellulose, polacrilin potassium, and polyethylene glycol 400. In addition the following coloring agents are used: FD&C Yellow No. 6 Aluminum Lake, hydroxypropyl cellulose and titanium dioxide (40 mg light peach); hydroxypropyl cellulose and titanium dioxide (80 mg white and 120 mg white). image 1
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 ∙ HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Chemical Structure
Verapamil hydrochloride is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg, or 120 mg of verapamil hydrochloride. The structural formula of verapamil hydrochloride is: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other cardioactive drugs. Inactive ingredients include anhydrous lactose, corn starch, hypromellose 2910, magnesium stearate, microcrystalline cellulose, polacrilin potassium, and polyethylene glycol 400. In addition the following coloring agents are used: FD&C Yellow No. 6 Aluminum Lake, hydroxypropyl cellulose and titanium dioxide (40 mg light peach); hydroxypropyl cellulose and titanium dioxide (80 mg white and 120 mg white).
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) ampules, 5-mg (2 ml) and 10-mg (4 ml) syringes, and 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. image description
Verapamil Hydrochloride is calcium antagonist or slow channel inhibitor. Verapamil Hydrochloride Injection, USP is available in 5 mg/2 mL and 10 mg/4 mL single dose vials (for intravenous administration). Each 1 mL of solution contains 2.5 mg verapamil HCl and 8.5 mg sodium chloride in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is 4.9 (4.0 to 6.5). Protect contents from light. Verapamil Hydrochloride Injection, USP vials are sterile. The structural formula of verapamil HCl USP is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Molecular weight: 491.07 Molecular formula: C 27 H 38 N 2 O 4 HCl Verapamil HCl USP is an almost white, crystalline powder practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not chemically related to other antiarrhythmic drugs. Structure
Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP 2.5 mg/mL and sodium chloride USP 8.5 mg/mL in water for injection USP. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid NF or sodium hydroxide NF for pH adjustment; pH is 4.0 to 6.0. The chemical name of verapamil hydrochloride USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride. Verapamil hydrochloride USP is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Molecular weight: 491.06 Molecular formula: C 27 H 38 N 2 O 4 • HCl Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Image
Verapamil hydrochloride extended-release capsules, USP are a calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release capsules are available for oral administration as a 120 mg hard gelatin capsule (bluish green opaque cap and white opaque body), a 180 mg hard gelatin capsule (bluish green opaque cap and light green opaque body) and a 240 mg hard gelatin capsule (bluish green opaque cap and bluish green opaque body). These bead filled capsules provide an extended-release of the drug in the gastrointestinal tract. The structural formula of verapamil HCl is given below: C 27 H 38 N 2 O 4 • HCl M.W. 491.07 Chemical name: (±)-5-[(3,4-Dimethoxyphenethyl)methylamino]-2-(3,4-dimethoxyphenyl)-2-isopropylvaleronitrile monohydrochloride. Verapamil HCl, USP is a white or almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl is not structurally related to other cardioactive drugs. In addition to verapamil HCl the verapamil hydrochloride extended-release capsules contain the following inactive ingredients: ammonium hydroxide, dibutyl sebacate, diethyl phthalate, ethylcellulose, FD&C Green No. 3, gelatin, hypromellose, maltodextrin, methacrylic acid copolymer Type A and B, oleic acid, polyethylene glycol, povidone, silicon dioxide, sodium lauryl sulfate, sugar spheres (which contain cornstarch and sucrose), talc and titanium dioxide, the 180 mg capsules also contain D&C Yellow No. 10. In addition, the black imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Verapamil Hydrochloride Structural Formula
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil Hydrochloride Injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH is 4.0 to 6.5. The chemical name of Verapamil Hydrochloride, USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula: Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. Formula1.jpg
Verapamil Hydrochloride Extended-Release Tablets, USP are calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil Hydrochloride Extended-Release Tablets, USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg of verapamil hydrochloride, USP (equivalent to 111.08 mg verapamil free base), as brown colored, oval, biconvex, film-coated tablets containing 180 mg of verapamil hydrochloride, USP (equivalent to 166.62 mg verapamil free base), and as brown colored, oval, biconvex, film-coated tablets containing 240 mg of verapamil hydrochloride, USP (equivalent to 222.16 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl, USP is given below: C 27 H 38 N 2 O 4 ·HCl M.W. 491.06 g/mol Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)-ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. Verapamil HCl, USP is not chemically related to other cardio active drugs. In addition to verapamil HCl, USP, the Verapamil Hydrochloride Extended-Release Tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium alginate, and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black FDA approved dissolution test specifications differ from USP for Verapamil Hydrochloride Extended-Release Tablets, USP, 120 mg, 180 mg and 240 mg. structure
Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs. structure
Summary not available yet.
About verapamil hydrochloride
This collection groups medications in our database that include verapamil hydrochloride. It currently includes 92 matching listings. Open a result to review formulation details, related brands, manufacturers, and product labels.
What You Can Review
Use this page to find products that share the same indexed ingredient name, then open drug detail pages for dosage, labeling, and related navigation.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.