trisodium citrate dihydrate - Medications

ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight (%w/v) Citric Acid, Monohydrate C 6 H 8 O 7 192.12 Dextrose Monohydrate C 6 H 12 O 6 ∙ H 2 O 198.17 Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of ANTICOAGULANT CITRATE DEXTROSE SOLUTION USP (ACD) SOLUTION A contains: (%w/v) Citric Acid, Monohydrate 0.8 g; Dextrose Monohydrate 2.45 g; Sodium Citrate Dihydrate 2.2 g; and Water for Injection. The polyolefin bag is not made with natural rubber latex or PVC. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The solution contact layer is an elasticized polyolefin. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.

Summary not available yet.

ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. Additive Solution Formula 3 (AS-3) is a clear solution that is steam-sterilized and non-pyrogenic. It does not contain bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight Dextrose Monohydrate USP C 6 H 12 O 6 ∙ H 2 O 198.17 Trisodium Citrate Dihydrate USP C 6 H 9 Na 3 O 9 294.10 Sodium Chloride USP NaCl 58.44 Monobasic Sodium Phosphate Monohydrate USP NaH 2 PO 4 ∙ H 2 O 137.99 Citric Acid Monohydrate USP C 6 H 8 0 7 ∙ H 2 O 210.14 Adenine USP C 5 H 5 N 5 135.13 Water for Injection USP H 2 O 18.00 Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.

Anticoagulant Citrate Dextrose Solution, Solution A, U.S.P., (ACD-A), is a sterile, non-pyrogenic solution of citric acid, sodium citrate, and dextrose, in water for injection. Each 10 mL of solution contains: Citric Acid, anhydrous, USP 0.073 g Sodium Citrate, dihydrate, USP 0.220 g Dextrose, monohydrate, USP 0.245 g Water for Injection, USP q.s. pH: 4.5 – 5.5 Single patient use only, on a single occasion. single use

Summary not available yet.

Summary not available yet.

ANTICOAGULANT SODIUM CITRATE 4% W/V SOLUTION USP is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. Sterilized with steam. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of ANTICOAGULANT SODIUM CITRATE 4% W/V SOLUTION USP contains: Sodium Citrate (dihydrate) 4.0 g; and Water for Injection to 100 mL (pH adjusted with citric acid). Approximate millimoles of sodium citrate: 13.6. The PVC bag is not made with natural rubber latex. The bag contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.

INDICATIONS AND USAGE Anticoagulant Sodium Citrate 4% w/v Solution, USP is intended for use only with automated apheresis devices.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Summary not available yet.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

Uses For the relief of nausea associated with upset stomach, including that due to overindulgence in food and drink.

InterSol solution is an isotonic solution designed to replace a proportion of the plasma used in the storage of platelets. The solution contains constituents that are naturally occurring components present in many cellular systems: sodium acetate as a nutrient, sodium citrate to prevent platelet clumping and activation, sodium phosphate for buffering and sodium chloride for osmolarity. InterSol solution does not have a pharmacological effect in vivo, but rather acts to provide the appropriate environment and nutrients in lieu of a portion of the plasma normally used for the storage of platelets.

InterSol solution is an isotonic solution designed to replace a proportion of the plasma used in the storage of platelets. The solution contains constituents that are naturally occurring components present in many cellular systems: sodium acetate as a nutrient, sodium citrate to prevent platelet clumping and activation, sodium phosphate for buffering and sodium chloride for osmolarity. InterSol solution does not have a pharmacological effect in vivo, but rather acts to provide the appropriate environment and nutrients in lieu of a portion of the plasma normally used for the storage of platelets.

InterSol solution is an isotonic solution designed to replace a proportion of the plasma used in the storage of platelets. The solution contains constituents that are naturally occurring components present in many cellular systems: sodium acetate as a nutrient, sodium citrate to prevent platelet clumping and activation, sodium phosphate for buffering and sodium chloride for osmolarity. InterSol solution does not have a pharmacological effect in vivo, but rather acts to provide the appropriate environment and nutrients in lieu of a portion of the plasma normally used for the storage of platelets.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

Uses For the relief of heartburn, sour stomach, acid indigestion, and upset stomach and accompanying nausea associated with overindulgence in food and drink.

The product is a clear, colorless solution containing Citric Acid USP 640 mg/5 mL, and Hydrous Sodium Citrate USP 490 mg/5 mL. It also contains Methylparaben NF and Propylparaben NF as preservatives. These concentrations yield 1 mEq of sodium, equivalent to 1 mEq of bicarbonate per mL of solution.

The product is a clear, colorless solution containing Citric Acid USP 640 mg/5 mL, and Hydrous Sodium Citrate USP 490 mg/5 mL. These concentrations yield 1 mEq of sodium, equivalent to 1 mEq of bicarbonate per mL of solution.

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.

SODIUM CITRATE 4% W/V ANTICOAGULANT SOLUTION USP is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of SODIUM CITRATE 4% W/V ANTICOAGULANT SOLUTION USP contains: Sodium Citrate (dihydrate) 4.0 g; and 100mL Water for Injection (pH adjusted with citric acid). The PVC bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.

Anticoagulant Sodium Citrate Solution USP A standalone direction insert does not exist for this product.

Anticoagulant Sodium Citrate Solution USP A standalone direction insert does not exist for this product.

Summary not available yet.

SODIUM CITRATE 4% W/V ANTICOAGULANT SOLUTION USP is designed to be metered by an apheresis device in apheresis procedures, to prevent platelet activation and coagulation as blood moves throughout the extracorporeal unit (tubing set) in an apheresis procedure. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. Sterilized with steam. The formulas of the active ingredients are provided in Table 1. Table 1: Active Ingredients Ingredients Molecular Formula Molecular Weight Sodium Citrate Dihydrate C 6 H 9 Na 3 O 9 294.10 Water for Injection H 2 O 18.00 Each 100 mL of SODIUM CITRATE 4% W/V ANTICOAGULANT SOLUTION USP contains: Sodium Citrate (dihydrate) 4.0 g; and Water for Injection to 100 mL (pH adjusted with citric acid). Approximate millimoles of sodium citrate: 13.8. The polyolefin bag is not made with natural rubber latex. The bag contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration. The bag is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.

InterSol solution is an isotonic solution designed to replace a proportion of the plasma used in the storage of platelets. The solution contains constituents that are naturally occurring components present in many cellular systems: sodium acetate as a nutrient, sodium citrate to prevent platelet clumping and activation, sodium phosphate for buffering and sodium chloride for osmolarity. InterSol solution does not have a pharmacological effect in vivo, but rather acts to provide the appropriate environment and nutrients in lieu of a portion of the plasma normally used for the storage of platelets.

/ PRODUCT SPECIFICATIONS 11.1. This blood bag system includes a 16 gauge × 1 1/2 inch (1.60 × 38 mm) needle with needle cover and either a 450 mL or 500 mL (nominal capacity 600 mL) primary collection bag containing 63 mL or 70 mL, respectively, Citrate Phosphate Dextrose Adenine (CPDA-1) anticoagulant. The Triple blood bag set has one integrally attached empty satellite bag (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). The Quadruple blood bag set has two integrally attached empty satellite bags (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). 11.2. Blood bag codes ending in A2 are supplied with Integral Diversion Blood Sampling Arm intended to divert and obtain donor samples for laboratory testing prior to collection of the Whole Blood unit. 11.3. Blood bag codes ending in A2 also include a DonorCare Needle Guard pre-attached to the donor tubing. DonorCare Needle Guard device instructions are provided on the reverse side. 11.4. The blood bag collection set is made of PVC (polyvinyl chloride with DEHP plasticizer). 11.5. The blood bag has no components made of natural rubber latex. 11.6. Tubing internal diameter (ID) nominal 3.0 mm. 11.7. Tubing outer diameter (OD) nominal 4.4 mm. 11.8. Donor tubing line maximum 16 segments available.

/ PRODUCT SPECIFICATIONS 11.1. This blood bag system includes a 16 gauge × 1 1/2 inch (1.60 × 38 mm) needle with needle cover and either a 450 mL or 500 mL (nominal capacity 600 mL) primary collection bag containing 63 mL or 70 mL, respectively, Citrate Phosphate Dextrose Adenine (CPDA-1) anticoagulant. The Triple blood bag set has one integrally attached empty satellite bag (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). The Quadruple blood bag set has two integrally attached empty satellite bags (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). 11.2. Blood bag codes ending in A2 are supplied with Integral Diversion Blood Sampling Arm intended to divert and obtain donor samples for laboratory testing prior to collection of the Whole Blood unit. 11.3. Blood bag codes ending in A2 also include a DonorCare Needle Guard pre-attached to the donor tubing. DonorCare Needle Guard device instructions are provided on the reverse side. 11.4. The blood bag collection set is made of PVC (polyvinyl chloride with DEHP plasticizer). 11.5. The blood bag has no components made of natural rubber latex. 11.6. Tubing internal diameter (ID) nominal 3.0 mm. 11.7. Tubing outer diameter (OD) nominal 4.4 mm. 11.8. Donor tubing line maximum 16 segments available.

/ PRODUCT SPECIFICATIONS 11.1. This blood bag system includes a 16 gauge × 1 1/2 inch (1.60 × 38 mm) needle with needle cover and either a 450 mL or 500 mL (nominal capacity 600 mL) primary collection bag containing 63 mL or 70 mL, respectively, Citrate Phosphate Dextrose Adenine (CPDA-1) anticoagulant. The Triple blood bag set has one integrally attached empty satellite bag (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). The Quadruple blood bag set has two integrally attached empty satellite bags (nominal capacity 400 mL) and one empty XT-612 5 day Platelet bag (nominal capacity 500 mL). 11.2. Blood bag codes ending in A2 are supplied with Integral Diversion Blood Sampling Arm intended to divert and obtain donor samples for laboratory testing prior to collection of the Whole Blood unit. 11.3. Blood bag codes ending in A2 also include a DonorCare Needle Guard pre-attached to the donor tubing. DonorCare Needle Guard device instructions are provided on the reverse side. 11.4. The blood bag collection set is made of PVC (polyvinyl chloride with DEHP plasticizer). 11.5. The blood bag has no components made of natural rubber latex. 11.6. Tubing internal diameter (ID) nominal 3.0 mm. 11.7. Tubing outer diameter (OD) nominal 4.4 mm. 11.8. Donor tubing line maximum 16 segments available.

triCitrasol ® Anticoagulant Sodium Citrate Concentrate, 46.7% Trisodium Citrate, is a sterile, non-pyrogenic solution of Trisodium Citrate (Dihydrate), USP. Each 30 mL of concentrate contains: Trisodium Citrate, dihydrate, USP 14.0 grams Water for Injection, USP q.s. pH adjusted with Citric Acid pH: 6.3 – 6.6 Single patient use only, on a single occasion. Chemical Structure

Uses For the relief of nausea associated with upset/sour stomach, including that due to overindulgence in food and drink.