triamterene - Medications

Triamterene, USP is an antikaliuretic agent and hydrochlorothiazide, USP is a diuretic/antihypertensive agent. At 50°C, triamterene, USP is practically insoluble in water (less than 0.1%). It is soluble in formic acid, sparingly soluble in methoxyethanol, and very slightly soluble in alcohol. Triamterene, USP is 2,4,7-triamino-6-phenylpteridine with a chemical formula of C 12 H 11 N 7 and a molecular weight of 253.27. The structural formula for triamterene is: TRIAMTERENE Hydrochlorothiazide, USP is slightly soluble in water. It is soluble in dilute ammonia, dilute aqueous sodium hydroxide, and dimethylformamide. It is sparingly soluble in methanol. Hydrochlorothiazide, USP is 6-chloro-3,4-dihydro-2H-1,2, 4-benzothiadiazine-7-sulfonamide 1,1-dioxide with a chemical formula of C 7 H 8 ClN 3 O 4 S 2 and a molecular weight of 297.75. The structural formula for hydrochlorothiazide is: HYDROCHLOROTHIAZIDE Each capsule, for oral administration, contains 37.5 mg triamterene, USP and 25 mg hydrochlorothiazide, USP. The 37.5 mg triamterene, USP and 25 mg hydrochlorothiazide, USP capsule inactive ingredients include: citric acid, corn starch, glycine, anhydrous lactose, magnesium stearate, Polysorbate 80, povidone, and sodium starch glycolate. The capsule shells and imprinting inks contain: D & C Yellow #10 Aluminum Lake, FD & C Blue #1 Aluminum Lake, FD & C Blue #2 Aluminum Lake, FD & C Red #40 Aluminum Lake, gelatin, pharmaceutical glaze, propylene glycol, synthetic black iron oxide, and titanium dioxide. The 37.5 mg triamterene, USP and 25 mg hydrochlorothiazide, USP capsules meets USP Dissolution Test 3 . Triamterene_Chemical_Structure HCTZ_Chemical_Structure

Triamterene and Hydrochlorothiazide Tablets, USP, combines triamterene USP, a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide, USP. Triamterene and hydrochlorothiazide tablets, USP are available in two strengths. Each triamterene and hydrochlorothiazide tablet,USP 75 mg/50 mg, contains triamterene, USP, 75 mg and hydrochlorothiazide, USP, 50 mg. Each triamterene and hydrochlorothaizide tablet, USP 37.5 mg/25 mg, contains triamterene, USP, 37.5 mg and hydrochlorothiazide, USP, 25 mg. Both strengths of triamterene and hydrochlorothiazide tablets, USP for oral administration contain the following inactive ingredients: anhydrous lactose, magnesium stearate, microcrystalline cellulose, polacrilin potassium, polyethylene glycol 8000, and povidone. Triamterene and hydrochlorothiazide tablets, 37.5 mg/25 mg also contain FD&C Blue No.2 Aluminum Lake. Triamterene, USP is 2, 4, 7-triamino-6-phenylpteridine. Triamterene, USP is practically insoluble in water, benzene, chloroform, ether and dilute alkali hydroxides. It is soluble in formic acid and sparingly soluble in methoxyethanol. Triamterene, USP is very slightly soluble in acetic acid, alcohol and dilute mineral acids. Its molecular weight is 253.27. Its structural formula is: Hydrochlorothiazide, USP is 6-chloro-3, 4-dihydro-2 H -1, 2, 4-benzothiadiazine-7-sulfonamide 1, 1-dioxide. Hydrochlorothiazide, USP is slightly soluble in water and freely soluble in sodium hydroxide solution, n-butylamine and dimethylformamide. It is sparingly soluble in methanol and insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.73. Its structural formula is: Triamterene Chemical Structure Hydrochlorothiazide Chemical Structure

Triamterene and hydrochlorothiazide combines triamterene a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide. Each Triamterene and Hydrochlorothiazide Tablet USP, 37.5 mg/25 mg contains: Triamterene, USP ..............................................................................37.5 mg Hydrochlorothiazide, USP ................................................................25 mg Each Triamterene and Hydrochlorothiazide Tablet USP, 75 mg/50 mg contains: Triamterene, USP .............................................................................75 mg Hydrochlorothiazide, USP ................................................................50 mg Each triamterene and hydrochlorothiazide tablet, USP intended for oral administration contains 37.5 mg triamterene USP with 25 mg hydrochlorothiazide USP and 75 mg triamterene USP with 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 Aluminum Lake, hypromellose, magnesium stearate and microcrystalline cellulose. Additionally, the 37.5 mg/25 mg tablets contain FD&C Blue No. 1 Aluminum Lake. Triamterene is 2,4,7-triamino-6-phenylpteridine. Triamterene, USP is soluble in formic acid. It is sparingly soluble in methoxyethanol. It is very slightly soluble in acetic acid, alcohol and dilute mineral acids. It is practically insoluble in water, benzene, ether, chloroform and dilute alkali hydroxides. Its molecular weight is 253.26. Its structural formula is: Hydrochlorothiazide is 6-chloro-3,4-dihydro-2 H -1,2,4, benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is very slightly soluble in water. It is freely soluble in sodium hydroxide solution, n-butylamine and dimethyl formamide. It is sparingly soluble in methanol. It is insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.7. Its structural formula is: figure figure

Each capsule of triamterene and hydrochlorothiazide for oral use, with opaque yellow cap and opaque white body, contains triamterene 37.5 mg and hydrochlorothiazide 25 mg, and is imprinted with 855. Hydrochlorothiazide is a diuretic/antihypertensive agent and triamterene is an antikaliuretic agent. Hydrochlorothiazide, USP is very slightly soluble in water. It is freely soluble in sodium hydroxide solution, n-butylamine and dimethyl formamide. It is sparingly soluble in methanol. It is insoluble in ether, chloroform and dilute mineral acids. Hydrochlorothiazide, USP is 6-chloro-3,4-dihydro-2 H -1, 2, 4-benzothiadiazine-7-sulfonamide 1,1-dioxide, and its structural formula is: Triamterene, USP is soluble in formic acid. It is sparingly soluble in methoxyethanol. It is very slightly soluble in acetic acid, alcohol and dilute mineral acids. It is practically insoluble in water, benzene, ether, chloroform and dilute alkali hydroxides. Triamterene, USP is 2, 4, 7-triamino-6-phenylpteridine and its structural formula is: Each triamterene and hydrochlorothiazide capsule, USP intended for oral administration contains 37.5 mg triamterene USP with 25 mg hydrochlorothiazide USP. In addition, each capsule contains the following inactive ingredients: citric acid monohydrate, colloidal silicon dioxide, croscarmellose sodium, gelatin, glycine, hypromellose, iron oxide yellow, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. Each capsule is printed with black pharmaceutical ink which contains ferric oxide black, potassium hydroxide and shellac. Capsules of triamterene and hydrochlorothiazide meet Drug Release Test 3 as published in the current USP monograph for Triamterene and Hydrochlorothiazide Capsules. image image

Triamterene and hydrochlorothiazide combines triamterene, a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide. Each Triamterene and Hydrochlorothiazide 37.5 mg/25 mg Tablet, USP contains 37.5 mg of Triamterene, USP and 25 mg of Hydrochlorothiazide, USP. Each Triamterene and Hydrochlorothiazide 75 mg/50 mg Tablet, USP contains 75 mg of Triamterene, USP and 50 mg of Hydrochlorothiazide, USP. Triamterene and hydrochlorothiazide tablets for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. In addition, the 37.5 mg/25 mg tablets contain D&C Yellow No.10 Aluminum Lake and FD&C Blue No.1 Aluminum Lake. Triamterene is 2,4,7-triamino-6-phenylpteridine. Triamterene is practically insoluble in water, benzene, chloroform, ether and dilute alkali hydroxides. It is soluble in formic acid and sparingly soluble in methoxyethanol. Triamterene is very slightly soluble in acetic acid, alcohol and dilute mineral acids. The following is the structural formula: Hydrochlorothiazide is 6-chloro-3,4-dihydro-2 H -1,2,4, benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution, n-butylamine and dimethylformamide. It is sparingly soluble in methanol and insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.73. The following is the structural formula: Triamterene Structural formula Hydrochlorothiazide Structural formula

Triamterene and hydrochlorothiazide tablets, USP combine triamterene, a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide. Each Triamterene and hydrochlorothiazide tablet,USP contains: Triamterene, USP ............................................................................... 75 mg Hydrochlorothiazide, USP .................................................................. 50 mg OR Triamterene, USP ................................................................................ 37.5 mg Hydrochlorothiazide, USP .................................................................. 25 mg Triamterene and hydrochlorothiazide tablets, USP for oral administration contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 Aluminum Lake, Hypromellose, magnesium stearate and microcrystalline cellulose. Triamterene is 2,4,7-triamino-6-phenylpteridine. Triamterene is practically insoluble in water, benzene, chloroform, ether and dilute alkali hydroxides. It is soluble in formic acid and sparingly soluble in methoxyethanol. Triamterene is very slightly soluble in acetic acid, alcohol and dilute mineral acids. Its molecular weight is 253.27. Its structural formula is: Hydrochlorothiazide is 6-chloro-3,4-dihydro-2 H -1,2,4,benzothiadiazine-7- sulfonamide 1,1-dioxide. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution, n-butylamine and dimethylformamide. It is sparingly soluble in methanol and insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.73. Its structural formula is:

Triamterene and hydrochlorothiazide combines triamterene, a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide. Each Triamterene and Hydrochlorothiazide 37.5 mg/25 mg Tablet, USP contains 37.5 mg of Triamterene, USP and 25 mg of Hydrochlorothiazide, USP. Each Triamterene and Hydrochlorothiazide 75 mg/50 mg Tablet, USP contains 75 mg of Triamterene, USP and 50 mg of Hydrochlorothiazide, USP. Triamterene and hydrochlorothiazide tablets for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. In addition, the 37.5 mg/25 mg tablets contain D&C Yellow No.10 Aluminum Lake and FD&C Blue No.1 Aluminum Lake. Triamterene is 2,4,7-triamino-6-phenylpteridine. Triamterene is practically insoluble in water, benzene, chloroform, ether and dilute alkali hydroxides. It is soluble in formic acid and sparingly soluble in methoxyethanol. Triamterene is very slightly soluble in acetic acid, alcohol and dilute mineral acids. The following is the structural formula: Hydrochlorothiazide is 6-chloro-3,4-dihydro-2 H -1,2,4, benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is slightly soluble in water and freely soluble in sodium hydroxide solution, n-butylamine and dimethylformamide. It is sparingly soluble in methanol and insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.73. The following is the structural formula: structure-triamterene structure-hydrochlorothiazide

Triamterene and hydrochlorothiazide combines triamterene a potassium-conserving diuretic, with the natriuretic agent, hydrochlorothiazide. Each Triamterene and Hydrochlorothiazide Tablet USP, 37.5 mg/25 mg contains: Triamterene, USP ..............................................................................37.5 mg Hydrochlorothiazide, USP ................................................................25 mg Each Triamterene and Hydrochlorothiazide Tablet USP, 75 mg/50 mg contains: Triamterene, USP .............................................................................75 mg Hydrochlorothiazide, USP ................................................................50 mg Each triamterene and hydrochlorothiazide tablet, USP intended for oral administration contains 37.5 mg triamterene USP with 25 mg hydrochlorothiazide USP and 75 mg triamterene USP with 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 Aluminum Lake, hypromellose, magnesium stearate and microcrystalline cellulose. Additionally, the 37.5 mg/25 mg tablets contain FD&C Blue No. 1 Aluminum Lake. Triamterene is 2,4,7-triamino-6-phenylpteridine. Triamterene, USP is soluble in formic acid. It is sparingly soluble in methoxyethanol. It is very slightly soluble in acetic acid, alcohol and dilute mineral acids. It is practically insoluble in water, benzene, ether, chloroform and dilute alkali hydroxides. Its molecular weight is 253.26. Its structural formula is: Hydrochlorothiazide is 6-chloro-3,4-dihydro-2 H -1,2,4, benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is very slightly soluble in water. It is freely soluble in sodium hydroxide solution, n-butylamine and dimethyl formamide. It is sparingly soluble in methanol. It is insoluble in ether, chloroform and dilute mineral acids. Its molecular weight is 297.7. Its structural formula is: figure figure

Each capsule for oral use, with opaque red cap and body, contains Triamterene USP, 50 or 100 mg, and is imprinted with the product name, DYRENIUM, strength (50 mg or 100 mg) and WPC 002 (for the 50-mg strength) and WPC 003 (for the 100-mg strength). Inactive ingredients consist of D&C Red No. 33, FD&C Yellow No. 6, Gelatin NF, Lactose NF, Magnesium Stearate NF, and Titanium Dioxide USP. Triamterene is 2,4,7-triamino-6-phenyl-pteridine: Its molecular weight is 253.27. At 50°C, triamterene is slightly soluble in water. It is soluble in dilute ammonia, dilute aqueous sodium hydroxide and dimethylformamide. It is sparingly soluble in methanol. Triamterene Chemical Structure

Triamterene Capsules are potassium-sparing diuretics. Triamterene Triamterene is 2,4,7-triamino-6-phenyl-pteridine. Its molecular weight is 253.27. At 50°C, triamterene is slightly soluble in water. It is soluble in dilute ammonia, dilute aqueous sodium hydroxide and dimethylformamide. It is sparingly soluble in methanol. Each capsule for oral use, with opaque red cap and body, contains Triamterene USP, 50 mg or 100 mg, and is imprinted with AT 50 (for the 50-mg strength) and AT 100 (for the 100-mg strength) in white ink on both the cap and body. Inactive ingredients consist of Lactose monohydrate, Magnesium stearate, Gelatin, D&C Red No.33, FD&C yellow No.6, Titanium dioxide, Sodium lauryl sulfate, Shellac and Potassium hydroxide.

Triamterene Capsules are potassium-sparing diuretics. Triamterene Triamterene is 2,4,7-triamino-6-phenyl-pteridine. Its molecular weight is 253.27. At 50°C, triamterene is slightly soluble in water. It is soluble in dilute ammonia, dilute aqueous sodium hydroxide and dimethylformamide. It is sparingly soluble in methanol. Each capsule for oral use, with opaque red cap and body, contains Triamterene USP, 50 mg or 100 mg, and is imprinted with AT 50 (for the 50-mg strength) and AT 100 (for the 100-mg strength) in white ink on both the cap and body. Inactive ingredients consist of Lactose monohydrate, Magnesium stearate, Gelatin, D&C Red No.33, FD&C yellow No.6, Titanium dioxide, Sodium lauryl sulfate, Shellac and Potassium hydroxide. triamterene-structure.jpg

Each capsule for oral use, with opaque red cap and body, contains Triamterene USP, 50 or 100 mg, and is imprinted with DYRENIUM, strength (50 mg or 100 mg) and WPC 002 (for the 50-mg strength) and WPC 003 (for the 100-mg strength). Inactive ingredients consist of D&C Red No. 33, FD&C Yellow No. 6, Gelatin NF, Lactose NF, Magnesium Stearate NF, and Titanium Dioxide USP. Triamterene is 2,4,7-triamino-6-phenyl-pteridine: Its molecular weight is 253.27. At 50°C, triamterene is slightly soluble in water. It is soluble in dilute ammonia, dilute aqueous sodium hydroxide and dimethylformamide. It is sparingly soluble in methanol. Structural formula

Triamterene Capsules are potassium-sparing diuretics Triamterene is 6-Phenyl-2,4,7-triaminopteridine. Its molecular weight is 253.26 (Rounded to 253.3). Triamterene is soluble in formic acid; sparingly soluble in methoxyethanol; very slightly soluble in acetic acid, alcohol and dilute mineral acid; practically insoluble in water, benzene, chloroform, ether and dilute alkali hydroxides. 50 mg: Beige Opaque color capsule imprinted with ‘E14’ on the body of the capsule filled with yellow colored granular powder. 100 mg: Beige Opaque color capsule imprinted with ‘E15’ on the body of the capsule filled with yellow colored granular powder. Inactive ingredients consist of anhydrous lactose, gelatin, iron oxide red, iron oxide yellow, magnesium stearate, silicon dioxide, sodium lauryl sulfate and titanium dioxide. FDA approved dissolution test specifications differ from USP. triam-str