tetrakis 2 methoxyisobutylisocyanide copper i tetrafluoroborate - Medications
Browse 3 medications containing tetrakis 2 methoxyisobutylisocyanide copper i tetrafluoroborate. Open a product record to review formulation details, related brands, manufacturers, and label-backed information.
Each 5 mL vial contains a sterile, non-pyrogenic, lyophilized mixture of: Tetrakis (2-methoxy isobutyl isonitrile) Copper (I) tetrafluoroborate - 1.0 mg Sodium Citrate Dihydrate - 2.6 mg L-Cysteine Hydrochloride Monohydrate - 1.0 mg Mannitol – 20 mg Stannous Chloride, Dihydrate, minimum (SnCl 2 ∙2H 2 O) - 0.025 mg Stannous Chloride, Dihydrate, (SnCl 2 ∙2H 2 O) - 0.075 mg Tin Chloride (stannous and stannic) Dihydrate, maximum (as SnCl 2 ∙2H 2 O) - 0.086 mg Prior to lyophilization the pH is 5.3 to 5.9. The contents of the vial are lyophilized and stored under nitrogen. This drug is administered by intravenous injection for diagnostic use after reconstitution with sterile, non-pyrogenic, oxidant-free Sodium Pertechnetate Tc99m Injection. The pH of the reconstituted product is 5.5 (5.0 - 6.0). No bacteriostatic preservative is present. The precise structure of the technetium complex is Tc99m[MIBI] 6 + where MIBI is 2-methoxy isobutyl isonitrile. 11.1 Physical Characteristics Technetium Tc99m decays by isomeric transition with a physical half-life of 6.02 hours Kocher, David, C., Radioactive Decay Data Tables, DOE/TIC-11026, 108(1981). . Photons that are useful for detection and imaging studies are listed below in Table 3.0. Table 3.0. Principal Radiation Emission Data Radiation Mean %/Disintegration Mean Energy (KeV) Gamma -2 89.07 140.5 11.2 External Radiation The specific gamma ray constant for Tc99m is 5.4 microcoulombs/Kg-MBq-hr (0.78R/mCi-hr) at 1 cm. The first half value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 4.0. To facilitate control of the radiation exposure from Megabequerel (millicurie) amounts of this radionuclide, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000. Table 4.0. Radiation Attenuation by Lead Shielding Shield Thickness (Pb) cm Coefficient of Attenuation 0.017 0.5 0.08 10 -1 0.16 10 -2 0.25 10 -3 0.33 10 -4 To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 5.0. Table 5.0 Physical Decay Chart; Tc99m Half-Life 6.02 Hours Hours Fraction Remaining Hours Fraction Remaining 0 Calibration Time 1.000 8 .398 1 .891 9 .355 2 .794 10 .316 3 .708 11 .282 4 .631 12 .251 5 .562 6 .501 7 .447
Each 5 mL vial contains a sterile, non-pyrogenic, lyophilized mixture of: Tetrakis (2-methoxy isobutyl isonitrile) Copper (I) tetrafluoroborate - 1.0 mg Sodium Citrate Dihydrate - 2.6 mg L-Cysteine Hydrochloride Monohydrate - 1.0 mg Mannitol – 20 mg Stannous Chloride, Dihydrate, minimum (SnCl 2 ∙2H 2 O) - 0.025 mg Stannous Chloride, Dihydrate, (SnCl 2 ∙2H 2 O) - 0.075 mg Tin Chloride (stannous and stannic) Dihydrate, maximum (as SnCl 2 ∙2H 2 O) - 0.086 mg Prior to lyophilization the pH is 5.3 to 5.9. The contents of the vial are lyophilized and stored under nitrogen. This drug is administered by intravenous injection for diagnostic use after reconstitution with sterile, non-pyrogenic, oxidant-free Sodium Pertechnetate Tc99m Injection. The pH of the reconstituted product is 5.5 (5.0 - 6.0). No bacteriostatic preservative is present. The precise structure of the technetium complex is Tc99m[MIBI] 6 + where MIBI is 2-methoxy isobutyl isonitrile. 11.1 Physical Characteristics Technetium Tc99m decays by isomeric transition with a physical half-life of 6.02 hours Kocher, David, C., Radioactive Decay Data Tables, DOE/TIC-11026, 108(1981). . Photons that are useful for detection and imaging studies are listed below in Table 3.0. Table 3.0. Principal Radiation Emission Data Radiation Mean %/Disintegration Mean Energy (KeV) Gamma -2 89.07 140.5 11.2 External Radiation The specific gamma ray constant for Tc99m is 5.4 microcoulombs/Kg-MBq-hr (0.78R/mCi-hr) at 1 cm. The first half value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 4.0. To facilitate control of the radiation exposure from Megabequerel (millicurie) amounts of this radionuclide, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000. Table 4.0. Radiation Attenuation by Lead Shielding Shield Thickness (Pb) cm Coefficient of Attenuation 0.017 0.5 0.08 10 -1 0.16 10 -2 0.25 10 -3 0.33 10 -4 To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 5.0. Table 5.0 Physical Decay Chart; Tc99m Half-Life 6.02 Hours Hours Fraction Remaining Hours Fraction Remaining 0 Calibration Time 1.000 8 .398 1 .891 9 .355 2 .794 10 .316 3 .708 11 .282 4 .631 12 .251 5 .562 6 .501 7 .447
Each 10 mL vial contains a sterile, non-pyrogenic, lyophilized mixture of: Tetrakis (2-methoxy isobutyl isonitrile) Copper (I) tetrafluoroborate – 1 mg Sodium Citrate Dihydrate - 2.6 mg L-Cysteine Hydrochloride Monohydrate – 1 mg Mannitol - 20 mg Stannous Chloride, Dihydrate, minimum (SnCl 2 •2H 2 O) - 0.025 mg Stannous Chloride, Dihydrate (SnCl 2 •2H 2 O) - 0.075 mg Tin Chloride (stannous and stannic) Dihydrate, maximum (as SnCl 2 •2H 2 O) - 0.086 mg Prior to lyophilization the pH is 5.6 to 5.7, and sodium hydroxide and/or hydrochloric acid may have been added for pH adjustment. The contents of the vial are lyophilized and stored under nitrogen. This drug is administered by intravenous injection for diagnostic use after reconstitution with sterile, non-pyrogenic, oxidant-free Sodium Pertechnetate Tc99m Injection. The pH of the reconstituted product is 5.5 (5.0-6.0). No bacteriostatic preservative is present. The precise structure of the technetium complex is Tc99m[MIBI] 6 + where MIBI is 2-methoxy isobutyl isonitrile. Tetrakis (2-methoxy isobutyl isonitrile) Copper (I) tetrafluoroborate has the following structural formula: Structural formula The molecular formula is C 24 H 44 N 4 O 4 BF 4 Cu, and the molecular weight is 602.98. Tetrakis (2-methoxy isobutyl isonitrile) Copper (I) tetrafluoroborate structural formula 11.1 Physical Characteristics Technetium Tc99m decays by isomeric transition with a physical half-life of 6.02 hours. 1 Photons that are useful for detection and imaging studies are listed below in Table 3.0. 1 Kocher, David, C., Radioactive Decay Data Tables, DOE/TIC-11026, 108(1981). Table 3.0 Principal Radiation Emission Data 11.2 External Radiation The specific gamma ray constant for Tc99m is 5.4 microcoulombs/Kg-MBq-hr (0.78 R/mCi-hr) at 1 cm. The first half value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 4.0. To facilitate control of the radiation exposure from Megabequerel (millicurie) amounts of this radionuclide, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000. To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 5.0. Table 4.0 Radiation Attenuation by Lead Shielding Table 5.0 Physical Decay Chart; Tc99m Half-Life 6.02 Hours
About tetrakis 2 methoxyisobutylisocyanide copper i tetrafluoroborate
This collection groups medications in our database that include tetrakis 2 methoxyisobutylisocyanide copper i tetrafluoroborate. It currently includes 3 matching listings. Open a result to review formulation details, related brands, manufacturers, and product labels.
What You Can Review
Use this page to find products that share the same indexed ingredient name, then open drug detail pages for dosage, labeling, and related navigation.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.