telmisartan - Medications

MICARDIS is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. MICARDIS is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, sorbitol, and magnesium stearate. MICARDIS tablets are hygroscopic and require protection from moisture. Micardis structure

MICARDIS HCT tablets are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1 receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, a non-peptide molecule, is chemically described as 4'-[(1,4'-dimethyl-2'-propyl[2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Hydrochlorothiazide is a white, or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is slightly soluble in water, and freely soluble in sodium hydroxide solution. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , and its structural formula is: MICARDIS HCT tablets are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan and hydrochlorothiazide, respectively. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, sorbitol, magnesium stearate, lactose monohydrate, microcrystalline cellulose, maize starch, and sodium starch glycolate. As coloring agents, the 40 mg/12.5 mg and 80 mg/12.5 mg tablets contain ferric oxide red, and the 80 mg/25 mg tablets contain ferric oxide yellow. MICARDIS HCT tablets are hygroscopic and require protection from moisture. Chemical Structure Chemical Structure

Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.6 and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP. Structure

Telmisartan tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl) methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: crospovidone, colloidal silicon dioxide, light magnesium oxide, mannitol, magnesium stearate and microcrystalline cellulose, sodium hydroxide, Telmisartan tablets are hygroscopic and require protection from moisture. stru

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets, USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. Telmisartan tablets are hygroscopic and require protection from moisture.

Telmisartan tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4′-[[4-methyl-6-(1-methyl-1 H -benzimidazol-2yl)-2-propyl-1 H -benzimidazol-1yl] methyl] biphenyl-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.60, and its structural formula is: Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone and sodium hydroxide. Telmisartan Structural Formula

Telmisartan, USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.62, and its structural formula is: Telmisartan, USP is a white to slightly yellowish, crystalline powder. It is practically insoluble in water, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone and sodium hydroxide. Telmisartan tablets, USP are hygroscopic and require protection from moisture. structural formula

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. Structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. Structure

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan,USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan,USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. telmisartan tablets are hygroscopic and require protection from moisture.

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan Tablets USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan Tablets USP are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine and sodium hydroxide. Telmisartan Tablets USP are hygroscopic and require protection from moisture. image description

Telmisartan tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4′-[[4-methyl-6-(1-methyl-1 H -benzimidazol-2yl)-2-propyl-1 H -benzimidazol-1yl] methyl] biphenyl-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.60, and its structural formula is: Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone and sodium hydroxide. Telmisartan Structural Formula

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan,USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan,USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. telmisartan tablets are hygroscopic and require protection from moisture. telmisartan-fig1

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and talc. Telmisartan tablets, USP are hygroscopic and require protection from moisture. 239f7255-figure-01

Telmisartan tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.6 g/mol and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan tablets, USP are hygroscopic and require protection from moisture. USP dissolution test pending. Structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan,USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan,USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. telmisartan tablets are hygroscopic and require protection from moisture.

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is: Telmisartan USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and talc. Telmisartan tablets, USP are hygroscopic and require protection from moisture. 239f7255-figure-01

Telmisartanis a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets, USP are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate and magnesium stearate. Telmisartan tablets are hygroscopic and require protection from moisture. The USP Dissolution Test is pending. Structure

Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.6 and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP. Structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and talc. Telmisartan tablets, USP are hygroscopic and require protection from moisture. 239f7255-figure-01

Telmisartan, USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.62, and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. structure

Summary not available yet.

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan,USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan,USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. telmisartan tablets are hygroscopic and require protection from moisture.

Telmisartan tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4′-[[4-methyl-6-(1-methyl-1 H -benzimidazol-2yl)-2-propyl-1 H -benzimidazol-1yl] methyl] biphenyl-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.60, and its structural formula is: Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone and sodium hydroxide. Telmisartan Structural Formula

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white or slightly yellowish, crystalline powder. It is practically insoluble in water, slightly soluble in methanol and sparingly soluble in methylene chloride. It dissolves in 1 M sodium hydroxide. Each telmisartan tablets, USP intended for oral administration contains 20 mg or 40 mg or 80 mg of telmisartan. In addition, each tablet contains the following inactive ingredients: ferric oxide red, lactose monohydrate, magnesium stearate, meglumine, povidone, sodium hydroxide, sodium stearyl fumarate and sorbitol. Telmisartan tablets are hygroscopic and require protection from moisture. structure product formula for telmisartan

Telmisartanis a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets, USP are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate and magnesium stearate. Telmisartan tablets are hygroscopic and require protection from moisture. The USP Dissolution Test is pending. Structure

Telmisartan tablets, USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4’-dimethyl-2'-propyl [2,6'-bi-1 H -benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.62, and its structural formula is: Telmisartan USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: crospovidone Type A/kollidon CL, mannitol, magnesium stearate, meglumine, povidone K-30, and sodium hydroxide. Telmisartan tablets USP are hygroscopic and require protection from moisture. telmisartanstructure.jpg

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan tablets, USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl) methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan, USP is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: crospovidone, colloidal silicon dioxide, light magnesium oxide, mannitol, magnesium stearate and microcrystalline cellulose, sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. stru

Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.6 and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP. Structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. Structure

Telmisartan tablets USP is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, sodium hydroxide and sodium streayl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture. telmisartan-structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets, USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. Telmisartan tablets are hygroscopic and require protection from moisture.

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. Structure

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl) methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan,USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan,USP. The tablets contain the following inactive ingredients: sodium hydroxide, meglumine, povidone, mannitol, and magnesium stearate. telmisartan tablets are hygroscopic and require protection from moisture. telmisartan-fig1

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan USP is a white or slightly yellowish, crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan USP. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets USP are hygroscopic and require protection from moisture. Chemical Structure

Telmisartan Tablets, USP are a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is chemically described as 4’-[[4-methyl-6-(1-methyl-1H-benzimidazol-2-yl)-2-propyl-1H-benzimidazol-1- yl] methyl]biphenyl-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.6 and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride. It dissolves in 1M sodium hydroxide. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, meglumine, povidone and sodium hydroxide pellets. Telmisartan Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP.

Telmisartan and amlodipine tablets, USP are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is chemically described as 4′-[[4-Methyl-6-(1-methyl-1 H -benzimidazol-2yl)-2-propyl-1 H -benzimidazol-1yl]methyl]biphenyl-2-carboxylic acid. Its molecular formula is C 33 H 30 N 4 O 2 and its structural formula is: Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-ethyl 5-methyl (4 RS )-2-[(2-aminoethoxy) methyl]-4-(2-chlorophenyl)-6-methyl-1,4 dihydropyridine-3,5-dicarboxylate benzenesulfonate. Its molecular formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: colloidal silicon dioxide, corn starch, FD&C Blue No. 1 Aluminum Lake, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, pregelatinized starch (corn) and sodium hydroxide. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light. Meets USP Dissolution Test 2 Telmisartan Structural Formula Amlodipine Besylate Structural Formula

Telmisartan and amlodipine tablets are a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets contain telmisartan, a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is a white to slightly yellow crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol and practically insoluble in water. It dissolves in 1M sodium hydroxide. Telmisartan is chemically described as 4’-[(1,4’-dimethyl-2’-propyl [2,6’-bi-1H-benzimidazol]-1’-yl)methyl]-[1,1’-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 and its structural formula is: Telmisartan and amlodipine tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white or almost white powder, freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Telmisartan and amlodipine tablets are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets also contain the following inactive ingredients: mannitol, sodium hydroxide, meglumine, povidone, sodium stearyl fumarate, microcrystalline cellulose, corn starch, crospovidone, magnesium stearate, black iron oxide and FD&C blue #1 - Alumium lake. Telmisartan and amlodipine tablets are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets require protection from light. Structure Structure

Telmisartan and amlodipine tablet USP is a fixed dose combination of telmisartan and amlodipine. Telmisartan and amlodipine tablets USP contain telmisartan, a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 and its structural formula is: Telmisartan and amlodipine tablets USP contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its structural formula is: Telmisartan and amlodipine tablets USP are formulated in four strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 40 mg, or 80 mg of telmisartan provided in the following four combinations: 40/5 mg, 40/10 mg, 80/5 mg, and 80/10 mg. Telmisartan and amlodipine tablets USP also contain the following inactive ingredients: colloidal silicon dioxide, crosscarmellose sodium, ferric oxide red, ferric oxide yellow, mannitol, magnesium stearate, povidone, sodium hydroxide and sodium starch glycolate. Telmisartan and amlodipine tablets USP are hygroscopic and require protection from moisture. Telmisartan and amlodipine tablets USP require protection from light. t am

Telmisartan and hydrochlorothiazide tablets are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1 receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, a non-peptide molecule, is chemically described as 4'-[(1,4'-dimethyl-2'-propyl[2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan, USP is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is slightly soluble in water, and freely soluble in sodium hydroxide solution. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , and its structural formula is: Telmisartan and hydrochlorothiazide tablets USP, are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan, USP, and hydrochlorothiazide, USP, respectively. The tablets contain the following inactive ingredients: crospovidone (Type B), hypromellose, lactose monohydrate, magnesium stearate, mannitol, meglumine, microcrystalline cellulose, povidone, sodium hydroxide, sodium starch glycolate, and sodium stearyl fumarate. As coloring agents, the 40 mg/12.5 mg and 80 mg/12.5 mg tablets contain ferric oxide red, and the 80 mg/25 mg tablets contain ferric oxide yellow. Telmisartan and hydrochlorothiazide tablets are hygroscopic and require protection from moisture. Structural Formula 1 Structural Formula 2

Telmisartan and hydrochlorothiazide tablets, USP are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1 receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, USP a non-peptide molecule, is chemically described as 4'-[(1,4'-dimethyl-2'-propyl[2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C 33 H 30 N4O 2 , its molecular weight is 514.62, and its structural formula is: Telmisartan, USP is a white to slightly yellowish crystalline powder. It is sparingly soluble in methylene chloride, slightly soluble in methanol, and practically insoluble in water. It dissolves in 1M sodium hydroxide. Hydrochlorothiazide, USP is a white or practically white crystalline powder with a molecular weight of 297.74. It is freely soluble in sodium hydroxide solution, in n -butyl amine and in dimethyl formamide. It is also very slightly soluble in water, sparingly soluble in methanol, and insoluble in ether, in chloroform and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , and its structural formula is: Telmisartan and hydrochlorothiazide tablets, USP are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan and hydrochlorothiazide, respectively. The tablets contain the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, mannitol, meglumine, povidone K 30, sodium hydroxide, sodium stearyl fumarate. As coloring agents, the 80 mg/12.5 mg tablets contain ferric oxide red, and the 40 mg/12.5 mg and 80 mg/25 mg tablets contain ferric oxide yellow. Telmisartan and hydrochlorothiazide tablets are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP. structure1 struct2

Telmisartan and hydrochlorothiazide tablets USP are a combination of telmisartan, an orally active angiotensin II antagonist acting on the AT 1 receptor subtype, and hydrochlorothiazide, a thiazide diuretic. Telmisartan, a non-peptide molecule, is chemically described as 4'-[(1, 4'-dimethyl-2'-propyl[2,6'-bi-1 H -benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Hydrochlorothiazide is a white, or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is slightly soluble in water, and freely soluble in sodium hydroxide solution. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , and its structural formula is: Telmisartan and hydrochlorothiazide tablets USP are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan and hydrochlorothiazide, respectively. The tablets contain the following inactive ingredients: crosscarmalose sodium, lactose monohydrate, magnesium stearate, povidone and sodium hydroxide. As coloring agents, the 40 mg/12.5 mg and 80 mg/12.5 mg tablets contain red iron oxide, and the 80 mg/25 mg tablets contain yellow iron oxide. image-01 image-02