sacubitril - Medications

ENTRESTO (sacubitril and valsartan) is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. ENTRESTO contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1 S ,3 R )-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis( N -pentanoyl- N -{[2´-(1 H -tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 g/mol and its schematic structural formula is: ENTRESTO is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are hypromellose, iron oxide red (E172), polyethylene glycol 4000, talc, and titanium dioxide (E171). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E172). ENTRESTO SPRINKLE is available as film-coated oral pellets within capsules for oral administration, containing 6 mg of sacubitril and 6 mg of valsartan; and 15 mg of sacubitril and 16 mg of valsartan. The oral pellet inactive ingredients are colloidal silicon dioxide, hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are basic butylated methacrylate copolymer, sodium lauryl sulfate, stearic acid, and talc. The capsule shell inactive ingredients are hypromellose and titanium dioxide (E171). The capsule shell for the 15 mg of sacubitril and 16 mg of valsartan oral pellets also contains iron oxide yellow (E172). The printing ink contains shellac, propylene glycol, iron oxide red (E172), ammonia solution (concentrated), and potassium hydroxide. Valsartan structural formula

ENTRESTO (sacubitril and valsartan) is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. ENTRESTO contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 and its schematic structural formula is: ENTRESTO is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, magnesium stearate (vegetable origin), talc, and colloidal silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide (E 171), Macrogol 4000, talc, and iron oxide red (E 172). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E 172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E 172). Valsartan structural formula

ENTRESTO (sacubitril and valsartan) is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. ENTRESTO contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 and its schematic structural formula is: ENTRESTO is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, magnesium stearate (vegetable origin), talc, and colloidal silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide (E 171), Macrogol 4000, talc, and iron oxide red (E 172). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E 172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E 172). Valsartan structural formula

ENTRESTO (sacubitril and valsartan) is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. ENTRESTO contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 and its schematic structural formula is: ENTRESTO is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, magnesium stearate (vegetable origin), talc, and colloidal silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide (E 171), Macrogol 4000, talc, and iron oxide red (E 172). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E 172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E 172). Valsartan structural formula

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C 24 H 28 NO 5 Na and C 24 H 27 N 5 Na 2 O 3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below: Sacubitril sodium: Valsartan disodium: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.

Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1 S ,3 R )-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-( N -pentanoyl- N -{[(2'-(1 H -tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 Na 3 . Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, iron oxide red, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow. or Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red. Image

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan and sodium cations, in the molar ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´biphenyl] -4-yl]methyl}-L valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 . Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets is available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg sacubitril monosodium and 26 mg of valsartan equivalent to 28.3 mg valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg sacubitril monosodium and 51 mg of valsartan equivalent to 56.6 mg valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg sacubitril monosodium and 103 mg of valsartan equivalent to 113.2 mg valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, sodium starch glycolate and talc. The film-coat inactive ingredients are hypromellose, Macrogol 4000, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet also contains iron oxide yellow, iron oxide black and iron oxide red. Structure

Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. The active pharmaceutical ingredient used to manufacture sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5.The complexis chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)-water (1/15). Its molecular formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 g/mol and its schematic structural formula is: Sacubitril and valsartan is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The inactive ingredients are hypromellose, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, talc and magnesium stearate. The film-coat inactive ingredients are hypromellose, titanium dioxide, polyethylene glycol 4000, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow.

Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (trihydrate) is C 48 H 55 N 6 Na 3 O 8 .3H 2 O. Its molecular mass is 967 and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, magnesium stearate (vegetable origin), talc, and colloidal silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide (E 171), polyethylene glycol, talc, and iron oxide red (E 172). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E 172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E 172). chem structure

Summary not available yet.

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C 24 H 28 NNaO 5 and a molecular weight of 432.47 g/mol. The structural formula is: Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C 24 H 27 N 5 Na 2 O 3 and a molecular weight of 480.52 g/mol. The structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc. Image Image

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 .Na 3 . Its molecular mass is 913 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red. 565

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 .Na 3 . Its molecular mass is 913 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red. 565

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 .Na 3 . Its molecular mass is 913 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red. 565

Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its empirical formula (trihydrate) is C 48 H 55 N 6 Na 3 O 8 .3H 2 O. Its molecular mass is 967 and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, magnesium stearate (vegetable origin), talc, and colloidal silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide (E 171), polyethylene glycol, talc, and iron oxide red (E 172). The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black (E 172). The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow (E 172). chem structure

Sacubitril and Valsartan Tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3 respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-ylmethyl-3-ethoxycarbonyl-1-butylcarbamoyl) propionate-(S)-3’-methyl-2’-(pentanoyl {2”-(tetrazol-5-ylate) biphenyl-4’-ylmethyl} amino) butyrate]. Its molecular formula is C 48 H 57 N 6 O 8 .3Na. Its molecular mass is 912.97 g/mol and its schematic structural formula is: Sacubitril and valsartan is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide. The film-coat inactive ingredients are hypromellose, di-acetylated monoglycerides, titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains FD&C Blue No. 2. The film-coat for the 97 mg of sacubitril and 103 mg of valsartan tablet contains iron oxide red. sacubitrilandvalsartantabletsstructure

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 .Na 3 . Its molecular mass is 913 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red. str

Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. The active pharmaceutical ingredient used to manufacture sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5.The complexis chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)-water (1/15). Its molecular formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 g/mol and its schematic structural formula is: Sacubitril and valsartan is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The inactive ingredients are hypromellose, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, talc and magnesium stearate. The film-coat inactive ingredients are hypromellose, titanium dioxide, polyethylene glycol 4000, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow. Structure

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan and sodium cations, in the molar ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´biphenyl] -4-yl]methyl}-L valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 . Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets is available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg sacubitril monosodium and 26 mg of valsartan equivalent to 28.3 mg valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg sacubitril monosodium and 51 mg of valsartan equivalent to 56.6 mg valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg sacubitril monosodium and 103 mg of valsartan equivalent to 113.2 mg valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, sodium starch glycolate and talc. The film-coat inactive ingredients are hypromellose, iron oxide yellow, Macrogol 4000, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. sacu-structure-a

Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. The active pharmaceutical ingredient used to manufacture sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5.The complexis chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)-water (1/15). Its molecular formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 g/mol and its schematic structural formula is: Sacubitril and valsartan is available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The inactive ingredients are hypromellose, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, talc and magnesium stearate. The film-coat inactive ingredients are hypromellose, titanium dioxide, polyethylene glycol 4000, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow. Structure

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Tri sodium [3-((1 S ,3 R )-1-biphenyl-4-ylmethyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-( S )-3’-methyl-2’-(pentanoyl{2”-(tetrazol-5-ylate)biphenyl-4’-ylmethyl}amino)butyrate]. Its molecular formula is C 48 H 55 N 6 O 8 ●3Na. Its molecular mass is 912.95 and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate, microcrystalline cellulose, and silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide, polyethylene glycol, talc, and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow. structure

Sacubitril and valsartan tablet is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the drug substance dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The drug substance is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1 '-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutonoate-(N-pentanoyl-N-{[2'-(1H-tetrazol-1-id-5-yl)[1,1’-biphenyl]-4-yl]methyl}-L-valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and talc. The film-coat inactive ingredients are hypromellose, titanium dioxide, macrogol, talc and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. structure

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C 48 H 55 N 6 O 8 .Na 3 . Its molecular mass is 913 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red. 565

Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C 48 H 55 N 6 O 8 Na 3 3H 2 O. Its molecular mass is 967 and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake. Image

Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24 H 28 NO 5 ·Na and its molecular weight is 433.48. Its structural formula is: Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24 H 33 N 5 Na 2 O 6 and its molecular weight is 533.54. Its structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. The film-coat for the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black, iron oxide red, and iron oxide yellow. sacubitril sodium valsartan disodium

Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24 H 28 NO 5 ·Na and its molecular weight is 433.48. Its structural formula is: Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24 H 33 N 5 Na 2 O 6 and its molecular weight is 533.54. Its structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow. sacubitril sodium valsartan disodium

Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan and sodium cations, in the molar ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Tri sodium (4-{[(1S, 3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´biphenyl] -4-yl]methyl}-L valinate). Its molecular formula is C 48 H 55 N 6 O 8 Na 3 . Its molecular mass is 912.96 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets is available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg sacubitril monosodium and 26 mg of valsartan equivalent to 28.3 mg valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg sacubitril monosodium and 51 mg of valsartan equivalent to 56.6 mg valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg sacubitril monosodium and 103 mg of valsartan equivalent to 113.2 mg valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, sodium starch glycolate and talc. The film-coat inactive ingredients are hypromellose, Macrogol 4000, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet also contains iron oxide yellow, iron oxide black and iron oxide red. Structure

Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, and sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Tri sodium [3-((1 S ,3 R )-1-biphenyl-4-ylmethyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-( S )-3’-methyl-2’-(pentanoyl{2”-(tetrazol-5-ylate)biphenyl-4’-ylmethyl}amino)butyrate]. Its molecular formula is C 48 H 55 N 6 O 8 ●3Na. Its molecular mass is 912.95 and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate, microcrystalline cellulose, and silicon dioxide. The film-coat inactive ingredients are hypromellose, titanium dioxide, Macrogol 4000, talc, and iron oxide red. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow. sacubitrilvalsartan-structure

Sacubitril and valsartan tablets are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:2.5, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Octadecasodiumhexakis(4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4­oxobutanoate)hexakis(N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate)—water (1/15). Its molecular formula (hemipentahydrate) is C 48 H 55 N 6 O 8 Na 3 2.5 H 2 O. Its molecular mass is 957.99 g/mol and its schematic structural formula is: Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are calcium carbonate, crospovidone, magnesium stearate, microcrystalline cellulose, polysorbate 80 and silicon dioxide. The film-coating material contains, diacetylated monoglycerides, hypromellose. Imprinting ink contains, ammonium hydroxide, ferrosoferric oxide, propylene glycol and shellac glaze.