potassium chloride - Medications

Full Prescribing Information: Each Serving Size of 2 caplets contain: Vitamin A (as Retinyl Acetate) 3000 mcg RAE Vitamin C (as Ascorbic Acid) 500 mg Vitamin D3 (as Cholecalciferol) 27.5 mcg (1100 IU) Vitamin E (as DL-alpha Tocopheryl Acetate) 90 mg Thiamin (as Thiamine Mononitrate) 6.5 mg Riboflavin 6.7 mg Niacin (as Niacinamide) 45 mg Vitamin B6 (as Pyridoxine HCl) 12 mg Folate 1700 mcg DFE (as L-5-Methyltetrahydrofolate calcium salt) (1000 mcg as L-Methyfolate) Vitamin B12 (as Methylcobalamin) 26 mcg Biotin 200 mcg Pantothenic Acid (as Calcium Pantothenate) 30 mg Calcium (as Calcium Carbonate) 150 mg Iron (as Ferrous Fumarate) 18 mg Iodine (as Potassium Iodide) 50 mcg Magnesium (as Magnesium Oxide) 75 mg Zinc (as Zinc Gluconate) 30 mg Selenium (as Selenomethionine) 60 mcg Copper (as Copper Oxide) 2 mg Manganese (as Manganese Sulfate) 1.5 mg Chromium (as Chromium Polynicotinate) 75 mcg Molybdenum (as Sodium Molybdate) 50 mcg Potassium (as Potassium Chloride) 49 mg Boron (as Boron Citrate) 50 mcg Other Ingredients: Microcrystalline Cellulose, Silicon Dioxide, Crospovidone, Magnesium Stearate, Coating:(Sodium Carboxymethylcellulose, Dextrose Monohydrate, Titanium Dioxide, Dextrin, Purified Stearic Acid, FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake).

Full Prescribing Information: Each Serving Size of 2 caplets contain: Vitamin A (as Retinyl Acetate)................................................... 3000 mcg RAE Vitamin C (as Ascorbic Acid)............................................................... 500 mg Vitamin D (as Cholecalciferol).......................................... 3 27.5 mcg (1100 IU) Vitamin E (as DL-alpha Tocopheryl Acetate)........................................... 90 mg Thiamin (as Thiamine Mononitrate)....................................................... 6.5 mg Riboflavin ............................................................................................. 6.7 mg Niacin (as Niacinamide)......................................................................... 45 mg Vitamin B6 (as Pyridoxine HCl)............................................................... 12 mg Folate 1700 mcg DFE (as L-5-Methyltetrahydrofolate calcium salt).........(1000 mcg as L-Methyfolate) Vitamin B12 (as Methylcobalamin)....................................................... 26 mcg Biotin ................................................................................................ 200 mcg Pantothenic Acid (as Calcium Pantothenate)........................................... 30 mg Calcium (as Calcium Carbonate)...........................................................150 mg Iron (as Ferrous Fumarate)......................................................................18 mg Iodine (as Potassium Iodide)................................................................50 mcg Magnesium (as Magnesium Oxide)........................................................ 75 mg Zinc (as Zinc Gluconate)......................................................................... 30 mg Selenium (as Selenomethionine)...........................................................60 mcg Copper (as Copper Oxide)....................................................................... 2 mg Manganese (as Manganese Sulfate).......................................................1.5 mg Chromium (as Chromium Polynicotinate)..............................................75 mcg Molybdenum (as Sodium Molybdate)................................................... 50 mcg Potassium (as Potassium Chloride)....................................................... 49 mg Boron (as Boron Citrate)...................................................................... 50 mcg Other Ingredients: Microcrystalline Cellulose, Silicon Dioxide, Crospovidone, Magnesium Stearate, Coating:(Sodium Carboxymethylcellulose, Dextrose Monohydrate, Titanium Dioxide, Dextrin, Purified Stearic Acid, FD&C Yellow #6/Sunset Yellow FCF Aluminum Lake).

For detail, please read the enclosed package (product information leaflet)

GaviLyte- C with flavor pack is a white, colon lavage preparation provided as water-soluble components for solution. In solution this preparation with lemon flavor pack added delivers the following, in grams per liter. Polyethylene glycol 3350 240.00 Sodium chloride 5.84 Potassium chloride 6.72 Sodium bicarbonate 2.98 Sodium sulfate 22.72 Flavor ingredients 0.500 When dissolved in sufficient water to make 4 liters, the final solution contains 125 mEq/L sodium, 10 mEq/L potassium, 20 mEq/L bicarbonate, 80 mEq/L sulfate, 35 mEq/L chloride and 18 mEq/L polyethylene glycol 3350. The reconstituted solution is an isosmotic solution, for oral administration, having mild salty taste. This preparation can be used without the lemon flavor pack and is administered orally or via nasogastric tube. Each lemon flavor pack (2 g) contains natural lemon flavor powder, saccharin sodium, maltodextrin.

Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF Sodium Sulfate, USP The chemical name is Na 2 SO 4 . The average Molecular Weight is 142.04. The structural formula is: Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na+ Cl- Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl a b c

For oral solution: Each 4 liter (4L) GaviLyte-N jug contains a white powder for reconstitution. GaviLyte-N is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 420g, sodium bicarbonate 5.72 g, sodium chloride 11.2 g, potassium chloride 1.4 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na+ Cl- Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl PEG structure Sod-Bicarbonate

GoLYTELY is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4-liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white powder. Polyethylene Glycol 3350, USP Sodium Sulfate, USP The chemical name is Na 2 SO 4 . The average Molecular Weight is 142.04. The structural formula is: Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na + Cl - Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl Polyethylene Glycol 3350 Structural Formula Sodium Sulfate Structural Formula Sodium Bicarbonate Structural Formula

Comments or Questions? Call 800.570.0021 Between 9am-5pm PST [email protected] siddhaflowers.com MFD by Siddha Flower Essences Oxnard, CA 93030 Made in USA Side Panel flower essences and homeopathy: Jump start your body's natural ability to heal Natural, safe and non-habit forming No contraindications. May be effectively used with drugs and other supplements Alcohol, sugar, dairy and gluten free Prepared in purified water with natural preservatives Blends time-tested natural medicine with modern technology One month supply FOUNDATIONAL REMEDIES may be used with targeted remedies stress relief daily alignment emotional detox deep-seated stress TARGETED REMEDIES sleep male balance healthy hair blood sugar female balance lung and sinus muscles and joints throat and voice youthful skin teeth and gums happy heart hearing digest sight

USES For the temporary relief of: • Promotes Healthy cell Function

INDICATIONS: For general support of healthy cellular matrix.

USES: • For the temporary relief of symptoms including: • infrequent urination • back pain • headache • dry mouth • low energy These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of low back pain, dry mouth, infrequent urination, headache, low energy levels.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

HOMEOPATHIC INDICATIONS: For temporary relief of low back pain, dry mouth, infrequent urination, headache, low energy levels.** **These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.

Ionosol MB and 5% Dextrose Injection (Multiple Electrolytes and 5% Dextrose Injection Type 1, USP) is a sterile, nonpyrogenic solution designed for intravenous administration. The solution is formulated to provide fluid and electrolytes for treatment of dehydration and acidosis. Each 100 mL contains dextrose, hydrous 5 g; sodium lactate, anhydrous 260 mg; potassium chloride 141 mg; magnesium chloride, hexahydrate 30 mg; monobasic potassium phosphate, anhydrous 15 mg; and monobasic sodium phosphate, monohydrate 25 mg. Each liter contains 25 mEq sodium (Na + ); 20 mEq potassium (K + ); 3 mEq magnesium (Mg ++ ); 22 mEq chloride (Cl¯); 3 mM of phosphate (PO 4 ≡); and 23 mEq lactate (CH 3 CH(OH)COO¯). The electrolyte content is hypotonic (100 mOsmol/L) in relation to the extracellular fluid (1pprox.. 280 mOsmol/L). The osmolarity for the total solution is 352 mOsmol/L (calc.). May contain hydrochloric acid for pH adjustment. pH is 5.0 (4.0 to 6.5). Dextrose, USP, hydrous is chemically designated C 6 H 12 O 6 • H 2 O (D-glucose, monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula: Magnesium Chloride, USP, hexahydrate is chemically designated MgCl 2 • 6H 2 O, colorless flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Monobasic Potassium Phosphate, NF, anhydrous is chemically designated KH 2 PO 4 , colorless crystals or white granular powder freely soluble in water. Sodium Lactate, USP is chemically designated CH 3 CH(OH)COONa, a 60% aqueous solution miscible in water. Monobasic Sodium Phosphate, USP, monohydrate is chemically designated NaH 2 PO 4 • H 2 O, white crystals or granules freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. structural formula dextrose

Each 100 mL of Isolyte® P (Multi-Electrolyte Injection) in 5% Dextrose contains: Hydrous Dextrose USP 5 g; Sodium Acetate Trihydrate USP 0.32 g Potassium Chloride USP 0.13 g; Magnesium Chloride Hexahydrate USP 0.031 g Dibasic Potassium Phosphate USP 0.026 g; Water for Injection USP qs pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.0–6.0) Calories per liter: 170 Calculated Osmolarity: 340 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 23; Chloride 29 Acetate (CH 3 COO - ) 23; Potassium 20; Magnesium 3; 1.5 mmole P/liter Phosphate (HPO ) 3 Isolyte® P in 5% Dextrose is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents or added buffers. This product is intended for intravenous administration. The formulas of the active ingredients are: Ingredients Molecular Formula Molecular Weight Sodium Acetate Trihydrate USP CH 3 COONa•3H 2 O 136.08 Potassium Chloride USP KCl 74.55 Magnesium Chloride Hexahydrate USP MgCl 2 •6H 2 O 203.30 Dibasic Potassium Phosphate USP K 2 HPO 4 174.18 Hydrous Dextrose USP 198.17 Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a rubberized copolymer of ethylene and propylene. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication site. Refer to the Directions for Use of the container. =4 special character Chemical Structure

Each 100 mL of Isolyte ® S (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 g Sodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 g Magnesium Chloride Hexahydrate USP 0.03 g Water for Injection USP qs pH adjusted with Glacial Acetic Acid USP pH: 6.7 (6.3–7.3) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 140; Potassium 5 Magnesium 3; Chloride 98; Acetate (CH 3 COO − ) 27 Gluconate (HOCH 2 (CHOH) 4 COO − ) 23 Isolyte ® S is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are: Ingredients Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44 Sodium Acetate Trihydrate USP CH 3 COONa•3H 2 O 136.08 Potassium Chloride USP KCl 74.55 Magnesium Chloride Hexahydrate USP MgCl 2 •6H 2 O 203.30 Sodium Gluconate USP 218.14 Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container. structural formula

Each 100 mL of Isolyte ® S pH 7.4 (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 g Sodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 g Magnesium Chloride Hexahydrate USP 0.03 g Dibasic Sodium Phosphate Heptahydrate USP 0.012 g Monobasic Potassium Phosphate NF 0.00082 g; Water for Injection USP qs pH may be adjusted with Glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0–7.8) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5 Magnesium 3; Chloride 98; 0.5 mmole P/liter Phosphate (HPO ) 1; Acetate (CH 3 COO – ) 27 Gluconate (HOCH 2 (CHOH) 4 COO – ) 23 Isolyte ® S pH 7.4 is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formulas of the active ingredients are: Ingredients Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44 Sodium Acetate Trihydrate USP CH 3 COONa•3H 2 O 136.08 Potassium Chloride USP KCl 74.55 Magnesium Chloride Hexahydrate USP MgCl 2 •6H 2 O 203.30 Dibasic Sodium Phosphate Heptahydrate USP Na 2 HPO 4 •7H 2 O 268.07 Monobasic Potassium Phosphate NF KH 2 PO 4 136.09 Sodium Gluconate USP 218.14 Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container. symbol Structural formula

Uses Temporarily relieves: fatigue* headaches* simple nervous tension*

KABIVEN is a sterile, hypertonic emulsion, for central venous administration, in a Three Chamber Bag. The product contains no added sulfites. Chamber 1 contains Dextrose monohydrate solution for fluid replenishment and caloric supply. Chamber 2 contains the Amino Acid solution with Electrolytes, which comprises essential and nonessential amino acids provided with electrolytes. Chamber 3 contains Intralipid ® 20% (a 20% Lipid Injectable Emulsion), prepared for intravenous administration as a source of calories and essential fatty acids. See below for formulations of each chamber and Table 2 for strength, pH, osmolarity, ionic concentration and caloric content of KABIVEN when all the chambers are mixed together. Chamber 1: Contains sterile, hypertonic solution of Dextrose, USP in water for injection with a pH range of 3.5 to 5.5. Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O) and has the following structure: Dextrose is derived from corn. Chamber 2 : Contains a sterile, solution of amino acids and electrolytes in water for injection. In addition, glacial acetic acid has been added to adjust the pH so that the final solution pH is 5.4 to 5.8. The formulas for the individual electrolytes and amino acids are as follows: Electrolytes Sodium Acetate Trihydrate, USP CH 3 COONax3H 2 O Potassium Chloride, USP KCl Sodium Glycerophosphate C 3 H 5 (OH) 2 PO 4 Na 2 xH 2 O Magnesium Sulfate Heptahydrate, USP MgSO 4 x7H 2 O Calcium Chloride Dihydrate, USP CaCl 2 x2H 2 O Essential Amino Acids Lysine (added as the hydrochloride salt) H 2 N(CH 2 ) 4 CH(NH 2 )COOH.HCl Phenylalanine CH 2 CH(NH 2 )COOH Leucine (CH 3 ) 2 CHCH 2 CH(NH 2 )COOH Valine (CH 3 ) 2 CHCH(NH 2 )COOH Histidine CH2CH(NH2)COOH Threonine CH 3 CH(OH)CH(NH 2 )COOH Methionine CH 3 S(CH 2 ) 2 CH(NH 2 )COOH Isoleucine CH 3 CH 2 CH(CH 3 )CH(NH 2 )COOH Tryptophan CH 2 CH(NH 2 )COOH Nonessential Amino Acids Alanine CH 3 CH(NH 2 )COOH Arginine H 2 NC(NH)NH(CH 2 ) 3 CH(NH 2 )COOH Glycine H 2 NCH 2 COOH Proline Glutamic Acid HOOC(CH 2 ) 2 CH(NH 2 )COOH Serine HOCH 2 CH(NH 2 )COOH Aspartic Acid HOOCCH 2 CH(NH 2 )COOH Tyrosine NH 2 Chamber 3: Contains a 20% Lipid Injectable Emulsion (Intralipid ® 20%) which is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and water for injection. In addition, sodium hydroxide has been added to adjust the pH. The final product pH range is 6 to 9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure: where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (48 to 58 %), oleic (17 to 30%), palmitic (9 to 13%), linolenic (5 to 11%) and stearic acid (2.5 to 5%). These fatty acids have the following chemical and structural formulas: Linoleic acid C 18 H 32 O 2 Oleic acid C 18 H 34 O 2 Palmitic acid C 16 H 32 O 2 Linolenic acid C 18 H 30 O 2 Stearic acid C 18 H 36 O 2 Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure: contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C 3 H 8 O 3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula: The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. An oxygen absorber is placed between the inner bag and the overpouch. The container is not made with natural rubber latex or polyvinyl chloride (PVC). KABIVEN contains no more than 25 mcg/L of aluminum. Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure

INDICATIONS Condition listed above or as directed by the physician

USES: May temporarily relieve nasal congestion and chronic ear complaints.** **Claims based on traditional homeopathic practice, not accepted medical evidence. Not FDA evaluated.

Uses ■ Temporarily relieves: ■ cold symptoms ■ sore throat ■ runny nose

Summary not available yet.

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

INDICATIONS Relief of symptoms of colds, sore throat and runny nose with a white discharge.

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

INDICATIONS Condition listed above or as directed by the physician

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

Nasal Congestion With White Nasal Discharge*

USES: HEALTHY SKIN**.

INDICATIONS Indications: KALI MURIATICUM Congested ears

Uses Helps promote and maintain healthy skin. Directions Tip bottle slightly allowing for tablets to fall into the cap. Use cap to drop tablets into mouth and allow them to dissolve under the tongue. Adults and adolescents (12 years and older) Take 1 to 4 tablets, one to four times daily, or as recommended by your healthcare practitioner. Children (under 12 years) Take under the direction of your healthcare practitioner.

USES: Temporarily relieves cough symptoms of diverse origins. Loosens chest congestion facilitating a productive cough. Soothes dry cough due to throat and bronquial irritation.** **This statement has not been evaluated by the FDA. It is based on documented Homeopathic Materia Medica.

Klor-Con ® extended-release tablets are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Klor-Con ® extended-release tablets are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Hydrogenated vegetable oil, magnesium stearate, polyethylene glycol, polyvinyl alcohol, silicon dioxide, talc and titanium dioxide. Yellow tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Yellow No. 6 Aluminum Lake. Blue tablets also contain FD&C Blue No. 1 Aluminum Lake and FD&C Blue No. 2 Aluminum Lake.

Klor-Con ® extended-release tablets are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Klor-Con ® extended-release tablets are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, granular powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive Ingredients: Paraffin wax pastilles, ethylcellulose, triethyl citrate, colloidal silicon dioxide, and magnesium stearate. White tablets also contain polyvinyl alcohol, titanium dioxide, polyethylene glycol 3350, and talc. Yellow tablets also contain polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol, D&C Yellow No. 10 aluminum lake, and FD&C Yellow No. 6 aluminum lake. FDA approved dissolution test specifications differ from USP. FDA approved acceptance criteria for assay differs from USP test.

Potassium chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, potassium chloride is KCl with a molecular mass of 74.55. Each packet of light orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq. Each packet of Klor-Con powder contains the following inactive ingredients: FD&C Yellow No. 6, malic acid, neotame, and natural orange flavor (Modified food starch (with added corn syrup), maltodextrin, citric acid, silicon dioxide and natural tocopherols).

Klor-Con ® M10 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. Klor-Con ® M15 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. Klor-Con ® M20 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Klor-Con ® M is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Klor-Con ® M is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Klor-Con ® M begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

Klor-Con ® M10 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. Klor-Con ® M15 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. Klor-Con ® M20 (potassium chloride extended-release tablets, USP) is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Klor-Con ® M is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Klor-Con ® M is a tablet formulation (not enteric-coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Klor-Con ® M begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride, USP. Inactive Ingredients : croscarmellose sodium, ethylcellulose and microcrystalline cellulose.

Lactated Ringer’s Irrigation is a sterile, nonpyrogenic solution of electrolytes in water for injection intended only for sterile irrigation, washing and rinsing purposes. The composition is based on a modification of the injectable formula originally known as Hartmann’s Solution. Each 100 mL of Lactated Ringer’s Irrigation contains: Sodium chloride 600 mg; sodium lactate, anhydrous 310 mg; potassium chloride 30 mg; calcium chloride, dihydrate 20 mg. The pH is 6.6 (6.0 — 7.5). The solution is isotonic (274 mOsmol/liter, calc.) and has the following electrolyte content (mEq/liter): Sodium (Na + ) 130; potassium (K + ) 4; calcium (Ca ++ ) 3; chloride (Cl − ) 109 and lactate (CH 3 CH(OH)COO − ) 28. Contains sodium hydroxide and may contain hydrochloric acid for pH adjustment. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose or short procedure irrigation. When smaller volumes are required, the unused portion should be discarded. Lactated Ringer’s Irrigation may be classified as a sterile irrigant, wash, rinse and pharmaceutical vehicle. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl 2 • 2H 2 O), white fragments or granules freely soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Sodium Lactate, USP is chemically designated C 3 H 5 NaO 3 , a 60% aqueous solution miscible in water. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of its chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. structural formula sodium lactate

Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1 . Table 1 Size (mL) Composition (g/L) Ionic Composition (mEq/L) Caloric Content (kcal/L) Sodium Chloride, USP (NaCl) Sodium Lactate, USP (C 3 H 5 NaO 3 ) Potassium Chloride, USP (KCl) Calcium Chloride, USP (CaCl 2 •2H 2 O) Osmolarity (mOsmol/L) (calc) pH Sodium Potassium Calcium Chloride Lactate Lactated Ringer's Injection, USP 250 6 3.1 0.3 0.2 273 6.5 (6.0 to 7.5) 130 4 2.7 109 28 9 500 1,000 The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1 . Table 1 Size (mL) Composition (g/L) Ionic Composition (mEq/L) Caloric Content (kcal/L) Sodium Chloride, USP (NaCl) Sodium Lactate, USP (C 3 H 5 NaO 3 ) Potassium Chloride, USP (KCl) Calcium Chloride, USP (CaCl 2 •2H 2 O) Osmolarity (mOsmol/L) (calc) pH Sodium Potassium Calcium Chloride Lactate Lactated Ringer's Injection, USP 250 6 3.1 0.3 0.2 273 6.5 (6.0 to 7.5) 130 4 2.7 109 28 9 500 1,000 The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

Rx only Each 100 mL of Lactated Ringer's Injection USP contains: Sodium Chloride USP 0.6 g; Sodium Lactate 0.31 g Potassium Chloride USP 0.03 g; Calcium Chloride Dihydrate USP 0.02 g Water for Injection USP qs pH may be adjusted with Hydrochloric Acid NF or Sodium Hydroxide NF pH: 6.2 (6.0–7.5) Calculated Osmolarity: 275 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 130; Potassium 4; Calcium 3; Chloride 110; Lactate (CH 3 CH(OH)COO − ) 28 Lactated Ringer's Injection USP is sterile, nonpyrogenic and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration in a single dose container. The formulas of the active ingredients are: Ingredients Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44 Sodium Lactate CH 3 CH(OH)COONa 112.06 Potassium Chloride USP KCl 74.55 Calcium Chloride Dihydrate USP CaCl 2 •2H 2 O 147.02 Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.

Lactated Ringer’s Injection USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in a single-dose container intended for intravenous administration. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Table 1 Size (mL) Composition (g/L) Osmolarity Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. (mOsmol/L) (calc) pH pH may be adjusted with Hydrochloric Acid NF or Sodium Hydroxide NF. Ionic Concentration (mEq/L) Caloric Content (kcal/L) Sodium Chloride, USP Sodium Lactate Potassium Chloride, USP Calcium Chloride, USP Sodium Potassium Calcium Chloride Lactate Lactated Ringer’s Injection, USP 250 500 1000 6 3.1 0.3 0.2 275 6.2 (6.0 to 7.5) 130 4 3 110 28 9 The chemical name, structural formula, and molecular weight of the active ingredients are shown in Table 2. Table 2 Ingredients Molecular Formula Molecular Weight Sodium Chloride USP 58.44 Sodium Lactate 112.06 Potassium Chloride USP 74.55 Calcium Chloride Dihydrate USP 147.02 Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film developed for parenteral drugs. It contains no plasticizers and has minimal leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site [see Dosage and Administration (2.3) ]. Sodium Chloride USP Sodium Lactate Potassium Chloride USP Calcium Chloride Dihydrate USP

Summary not available yet.