penicillin g potassium - Medications

Buffered Penicillin G Potassium for Injection, USP is sterile penicillin G potassium powder for reconstitution. It is an antibacterial agent intended for intravenous or intramuscularly use. Chemically, Penicillin G Potassium is monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate, and has the following chemical structure: Penicillin G potassium, a water soluble benzylpenicillin, is a white to almost white crystalline powder which is almost odorless and/or after reconstitution a colorless solution. The pH of freshly constituted solutions usually ranges from 6 to 8.5. Sodium citrate and citric acid have been added as a buffer. Buffered Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 1,000,000 units (1 million units), 5,000,000 units (5 million units), or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million unit contains approximately 7.9 milligrams of sodium (0.34 mEq) and 65.6 milligrams of potassium (1.68 mEq). STRUCTURE

Penicillin G Potassium, USP is a natural penicillin. It is chemically designated 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylicacid,3,3-dimethyl-7-oxo-6-[(phenylacetyl)amino], monopotassium salt, [2S-(2α, 5α, 6β)]. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. It is freely soluble in water, in isotonic sodium chloride solution and in dextrose solution. The structural formula is as shown below. C 16 H 17 KN 2 O 4 S M.W. 372.48 Buffered Penicillin G Potassium for Injection is a sterile, pyrogen-free powder for reconstitution. Buffered Penicillin G Potassium for Injection is an antibacterial agent for intramuscular, continuous intravenous drip, intrapleural or other local infusion, and intrathecal administration. Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered with sodium citrate to a pH of 6.0 to 8.5. structure

Buffered Penicillin G Potassium for Injection, USP is a sterile, pyrogen-free powder for reconstitution. Buffered Penicillin G Potassium for Injection, USP is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Penicillin G Potassium for Injection, USP is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure: Formula: C 16 H 17 KN 2 O 4 S Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0 to 8.5. Figure

Penicillin G Potassium, USP is a natural penicillin. It is chemically designated 4-Thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid,3,3-dimethyl-7-oxo-6-[(phenylacetyl)amino]-, monopotassium salt, [2 S -(2α, 5α, 6β)]. It is crystalline. It is freely soluble in water, in isotonic sodium chloride solution and in dextrose solutions. The structural formula is as shown below. Penicillin G Potassium Injection, USP (equivalent to 1, 2, or 3 million units of penicillin G) is a 50 mL premixed, iso-osmotic, sterile, nonpyrogenic, frozen solution for intravenous administration. Dextrose, USP has been added to the above dosages to adjust osmolality (approximately 2 g, 1.2 g, and 350 mg as dextrose hydrous, respectively). Sodium Citrate, USP has been added as a buffer (0.10 g, 0.20 g and 0.30 g as sodium citrate dihydrate, respectively). The pH has been adjusted with hydrochloric acid and may have been adjusted with sodium hydroxide. The pH is 6.5 (5.5 to 8.0). The solution is contained in a single dose GALAXY container (PL 2040 Plastic) and is intended for intravenous use after thawing to room temperature. This GALAXY container is fabricated from a specially designed multilayer plastic (PL 2040). Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers as well as by tissue culture toxicity studies. Penicillin G Potassium Injection USP Structural Formula

Penicillin G Potassium for Injection, USP is a natural penicillin. Penicillin G Potassium for Injection, USP is a sterile, pyrogen-free powder for reconstitution. Penicillin G Potassium for Injection, USP is an antibacterial agent for intramuscular, continuous intravenous drip, intrapleural or other local infusion, and intrathecal administration. Chemically, Penicillin G Potassium for Injection, USP is monopotassium (2S,5R,6R) -3,3-dimethyl-7- oxo-6- (2-phenylacetamido) -4-thia-1- azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following structural formula: Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0-8.5. Penicillin G potassium is buffered with sodium citrate to an optimum pH. Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 1,000,000 units (1 million units), 5,000,000 units (5 million units), for intramuscular and intravenous use or 20,000,000 units (20 million units), for intravenous use only, of penicillin G as the potassium salt. Each million units contains approximately 6.9 milligrams of sodium (0.3 mEq) and 65.8 milligrams of potassium (1.68 mEq). structure

Penicillin G Potassium, USP is a natural penicillin. It is chemically designated 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid,3,3-dimethyl-7-oxo-6-[(phenylacetyl)amino]-, monopotassium salt, [2 S -(2α, 5α, 6β)]. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. It is freely soluble in water, in isotonic sodium chloride solution and in dextrose solution. The structural formula is as shown below. C 16 H 17 KN 2 O 4 S M.W. 372.48 Buffered Penicillin G Potassium for Injection, USP is a sterile, pyrogen-free powder for reconstitution. Buffered Penicillin G Potassium for Injection, USP is an antibacterial agent for intramuscular, continuous intravenous drip, intrapleural or other local infusion, and intrathecal administration. Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered with sodium citrate to a pH of 6.0 to 8.5. Structural Formula

Buffered penicillin G potassium for injection, USP is sterile penicillin G potassium powder for reconstitution. It is an antibacterial agent intended for intravenous or intramuscularly use. Chemically, penicillin G potassium is monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate, and has the following chemical structure: Molecular Formula: C 16 H 17 KN 2 O 4 S Molecular Weight: 372.48 Penicillin G potassium, a water soluble benzylpenicillin, is a white to almost white crystalline powder which is almost odorless and/or after reconstitution a colorless solution. The pH of freshly constituted solutions usually ranges from 6 to 8.5. Sodium citrate and citric acid have been added as a buffer. Buffered penicillin G potassium for injection, USP is supplied in vials equivalent to 1,000,000 units (1 million units), 5,000,000 units (5 million units), or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million unit contains approximately 7.9 milligrams of sodium (0.34 mEq) and 65.6 milligrams of potassium (1.68 mEq). chemical-structure

Penicillin G Potassium, USP is a natural penicillin. It is chemically designated 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylicacid,3,3-dimethyl-7-oxo-6-[(phenylacetyl)amino], monopotassium salt, [2 S -(2α, 5α, 6β)]. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. It is freely soluble in water, in isotonic sodium chloride solution and in dextrose solution. The structural formula is as shown below. C 16 H 17 KN 2 O 4 S M.W. 372.48 Buffered Penicillin G Potassium for Injection is a sterile, pyrogen-free powder for reconstitution. Buffered Penicillin G Potassium for Injection is an antibacterial agent for intramuscular, continuous intravenous drip, intrapleural or other local infusion, and intrathecal administration. Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered with sodium citrate to a pH of 6.0 to 8.5. Structural Formula

Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure: Formula C 16 H 17 KN 2 O 4 S Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5. Chemical Structure

Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure: Formula C 16 H 17 KN 2 O 4 S Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5. Chemical Structure

Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure: Formula C 16 H 17 KN 2 O 4 S Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5. Chemical Structure