lidocaine - Medications
Browse 812 medications containing lidocaine. Open a product record to review formulation details, related brands, manufacturers, and label-backed information.
Uses Temporarily relieves muscle soreness and minor joint pains in the wrist, knees, back, neck, hips, shoulders, elbows. Usage 1. Remove patch from outer package 2. Partially peel back protection film 3. Place on affected area 4. Remove remaining film while pressing patch to skin
Temporarily relieves muscle soreness and minor jointpains in the wrist, knees, back, neck, hips, shoulders.elbows.
Temporarily relieves muscle soreness and minorjoin pains in the wrist,knees, back, neck, hips,shoulders,elbows.
Directions Adults and children over 12 years of age: clean and dry affected area strip off the clear protective film and place adhesive patch over affected area leave in place for up to 8 hours wash hands thoroughly after applying or removing patch. Children under 12 years: ask a doctor before use.
Use Temporarily relieves muscle soreness and minor joint pains in the wrist, knees, back, neck, hips, shoulders, elbows.
Use For temporary relief of pain
Use For temporary relief of pain
Indications and Usage Uses: Temporaily relieves minor pains.
Indications and Usage Uses: Temporaily relieves minor pains.
Directions Adults and children 12 years of age and over: Clean and dry affected area,free of lotions, ointments and creams.Carefully remove backing starting at a corner.Apply sticky side of patch to affected area. Do not use more than onepatch in a 12 hourperiod. Repeat as necessary. Maximum 2 patches per day. Discard patch after singleuse.Children under 12 years of age: consult a physician.
Temporarily relieves minor pain
Temporarly relieves muscle soreness and minor jointpains in the wrist, knees, back, neck, hips, shoulders,elbows.
For temporary relief of pain
Uses For the temporary relief of pain
Temporarily relieves minor pain
Idications and Usage Uses: Temporaily relieves minor pains.
Lidocaine patch 5% is comprised of an adhesive material containing 5% lidocaine, USP, which is applied to a non-woven polyester backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine, USP is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: [chemical structure] Each adhesive patch contains 700 mg of lidocaine, USP (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyvinyl alcohol, propylparaben, propylene glycol, sodium carboxymethylcellulose, partially neutralized sodium polyacrylate, D-sorbitol, tartaric acid, and urea.
Idications and Usage Uses: Temporaily relieves minor pains.
Temporarily relieves minor pain
Uses For temporary relief of pain
Uses Temporarily relieves minor pain
LIDOCAN™ is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. Lidocaine chemical structure
LIDOCAN™ III is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. molecule
Lidocan™ IV is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. molecule
Uses Temporarily relieves mild to moderate aches and pains of muscles and joints associated with muscle soreness, strains, sprains, arthritis, simple backache, muscle stiffness, bruises.
Lidocan™ V is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. molecule
Lidocan™ VI is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. molecule
Lidocan™ VII is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol:water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: purified water, glycerin, sorbitol, polyacrylic acid, sodium carboxymethylcellulose, sodium polyacrylate, propylene glycol, urea, kaolin, tartaric acid, gelatin, polyvinyl alcohol, dihydroxyaluminum aminoacetate, edetate disodium, methylparaben, and propylparaben. molecule
Use For the temporary relief of pain.
Use For the temporary relief of pain.
Drug Facts Drug Facts Active Ingredients Lidocaine 4% Purpose Topical Anesthetic Uses: For the temporary relief of pain Warnings: For external use only DO NOT USE Do not use - more than 1 patch at a time - on wounds or damaged skin - with a heating pad - or if you are allergic to any ingredients of this product WHEN USING When using this product - use only as directed - avoid contact with eyes, mucous membranes or rashes - do not bandage tightly STOP USE Stop use and ask a doctor if - localized skin reactions occur, such as rash, itching, redness, irritation, pain, swelling and blistering - conditions worsen - symptoms persist for more than 7 ... PREGNANCY OR BREAST FEEDING If pregnant or breast-feeding, ask a health professional before use. KEEP OUT OF REACH OF CHILDREN Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away. Uses: For the temporary relief of pain
Drug Facts Uses: For temporary relief of pain.
LIDODERM (lidocaine patch 5%) is comprised of an adhesive material containing 5% lidocaine, which is applied to a non-woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm × 14 cm. Lidocaine is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure
Drug Facts Uses: Temporarily relieves minor pain
Uses For temporary relief of pain
Uses Temporarily relieves the pain and itching due to anorectal disorders.
For temporary relief of pain.
Uses For the temporary relief of pain.
Uses For the temporary relief of pain.
Uses Temporarily relieves minor pain
Uses Temporarily relieves minor pain
Uses For the temporary relief of pain.
Uses Temporarily relieves minor pain
Uses For the temporary relief of pain.
Uses For the temporary relief of pain.
Uses For the temporary relief of pain.
Uses For the temporary relief of pain.
Uses Temporarily relieves minor pain.
Drug Facts Active ingredients: Lidocaine 4% Menthol 1% Purpose Topical anesthetic - Topical analgesic INDICATIONS & USAGE Uses: For temporary relief of pain. Warnings For external use only DO NOT USE Do not use: More than one patch on your body at a time - On wounds or damaged skin - For more than one week without consulting a doctor - If you are allergic to any ingredients of this product. WHEN USING When using this product: Use only as directed - Avoid contact with the eyes, mucous membranes or rashes - Do not bandage tightly STOP USE Stop use and consult a doctor if: Localized skin reactions occur, such as rash, itching, redness, irritation, pain, swelling and blistering - Conditions worsen - Symptoms persist for more than 7 ... PREGNANCY OR BREAST FEEDING If pregnant or breastfeeding: Ask a health professional before use. KEEP OUT OF REACH OF CHILDREN Keep out of reach of children and pets. If swallowed, get medical help or contact a Poison Control Center right away. DOSAGE & ADMINISTRATION Directions: Adults, or children over the age of 12: Clean and dry affected area. Remove film from patch and apply to skin (see illustration). Apply one patch at a time to affected area, not more ... Other Information: Store at 68 °F-77° F (20 °C-25° C.) Store in a clean, dry place without direct sunlight. Inactive Ingredients: Dihydroxyaluminum Aminoacetate, Edetate Disodium, Glycerin, Hydroxyacetophenone, Kaolin, L(+)-Tartaric Acid, Mineral Oil, Polysorbate 80, Polyacrylic Acid, Polyvinylpyrroliodone K90, Propylene ... QUESTIONS Questions or Comments: 833.711.8833 - [email protected] PRINCIPAL DISPLAY PANEL NDC 82944-104-10 - LIDOSYNC - Lidocaine 4% Menthol 1% TOPICAL PAIN PATCH - For Temporary Pain Relief - Flexible Patch Innovation - Soothing and Effective - Long Lasting Relief - 10 FLEXIBLE ... INGREDIENTS AND APPEARANCE Product Information Uses: For temporary relief of pain.
Lidothol is a prescription topical patch, packaged with 15 medicated patches: 5 per re-sealable pouch, 3 pouches. Lidocaine is present in a 4% concentration (w/w). It is chemically designated as 2-‐(diethylamino)-‐N-‐(2,6-‐ dimethylphenyl) acetamide and has an empirical formula of C14H22N2O. The molecular weight of Lidocaine is 234.34 g/mol. Menthol is present in a 1% concentration (w/w). The chemical name is (1R,2S,5R)-‐2-‐isopropyl-‐5-‐methylcyclohexanol. The empirical formula for Menthol is C10H20O with a molecular weight of 156.27 g/mol. Lidothol (Lidocaine 4% / Menthol 1% Patch) consists of an adhesive hydrogel containing Lidocaine 4% and Menthol 1%, applied to flexible woven polyester backing and protected by a plastic film. The protective film is removed prior to application to the skin. The size of the patch is 12cm x 8cm. Lidocaine is chemically designated as 2-‐(diethylamino)-‐N-‐(2,6-‐dimethylphenyl), has an octanol: water partition ration of 43 at pH 7.4, and has the following structure: Menthol is chemically designated as 2-‐Isopropyl-‐5-‐methylcyclohexanol. It contains colorless, hexagonal crystals, usually needle-‐like; fused masses or crystalline powder with a pleasant, peppermint-‐like odor. It has a melting point between 31°C to 36° C. Menthol has the following structure: Each adhesive patch contains 76.5mg of Lidocaine and 85mg of Menthol. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, glycerol, methylparaben, polysorbate 80, propylene glycol, sodium polyacrylate, tartaric acid, water lidocaine menthol
About lidocaine
This collection groups medications in our database that include lidocaine. It currently includes 812 matching listings. Open a result to review formulation details, related brands, manufacturers, and product labels.
What You Can Review
Use this page to find products that share the same indexed ingredient name, then open drug detail pages for dosage, labeling, and related navigation.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.