fluocinolone acetonide - Medications
Browse 48 medications containing fluocinolone acetonide. Open a product record to review formulation details, related brands, manufacturers, and label-backed information.
Derma-Smoothe/FS ® (fluocinolone acetonide), Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Derma-Smoothe/FS ® (fluocinolone acetonide), Topical Oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Derma-Smoothe/FS ® has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Derma-Smoothe/FS ® contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil NF and fragrances. Derma-Smoothe/FS ® is formulated with 48% refined peanut oil NF. The peanut oil used in Derma-Smoothe/FS ® is tested for peanut proteins through amino acid analysis which can detect the quantity of amino acids to below 0.5 parts per million. Chemical Structure
DERMA-SMOOTHE/FS Scalp Oil (fluocinolone acetonide) topical oil, 0.01% contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1–methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of DERMA-SMOOTHE/FS Scalp Oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil and fragrances. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. DERMA-SMOOTHE/FS Scalp Oil is formulated with 48% refined peanut oil. The bulk refined peanut oil used in DERMA-SMOOTHE/FS Scalp Oil is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in DERMA-SMOOTHE/FS Scalp Oil is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm). Chemical Structure
DERMOTIC OIL (fluocinolone acetonide) 0.01% ear drops contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16, 17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of DERMOTIC OIL contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, refined peanut oil and fragrances. DERMOTIC OIL is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in DERMOTIC OIL is heated at 246°C (475°F) for at least 15 minutes. The refined peanut oil used in DERMOTIC OIL is routinely tested for peanut proteins through amino acid analysis; the quantity of amino acids is below 0.5 parts per million (ppm). Chemical Structure
Flac ® Oil Ear Drops contain fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. This formulation is also marketed as fluocinolone acetonide oil, 0.01% (body oil) for the treatment of atopic dermatitis and fluocinolone acetonide oil, 0.01% (scalp oil) for the treatment of psoriasis of the scalp. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Chemical Structure
Fluocinolone acetonide topical oil, 0.01% (scalp oil) contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as fluocinolone acetonide oil, 0.01% (ear drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (scalp oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contain isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.
Fluocinolone Acetonide Cream, USP 0.025% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Cream, USP contains fluocinolone acetonide 0.25 mg/g in a water-washable aqueous base of butylated hydroxytoluene, cetyl alcohol, citric acid anhydrous, edetate disodium, methylparaben and propylparaben (preservatives), mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, purified water, simethicone emulsion, stearyl alcohol, and white wax. FA Chemical Structure
Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Chemical Structure
Fluocinolone acetonide topical oil, 0.01% (scalp oil) contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as fluocinolone acetonide oil, 0.01% (ear drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (scalp oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contain isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. structure
Fluocinolone acetonide topical oil, 0.01% (body oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6, 9-difluoro-11, 21-dihydroxy-16, 17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (scalp oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% (ear drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (body oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% (body oil) is formulated with 48% refined peanut oil NF.
Fluocinolone Acetonide Ointment USP, 0.025% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Ointment USP, 0.025% contains 0.25 mg/g of fluocinolone acetonide USP in a white petrolatum USP vehicle. Structure
Fluocinolone Acetonide Oil, 0.01% (Ear Drops) contain fluocinolone acetonide, USP {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. Chemically, fluocinolone acetonide, USP is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide, USP in Fluocinolone Acetonide Oil, 0.01% (Ear Drops) has a molecular weight of 452.49. It is a white or almost white, crystalline powder and melts at 270°C with decomposition; practically insoluble in water and heptane, soluble in methanol, anhydrous ethanol and acetone, slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Oil, 0.01% (Ear Drops) contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. structure.jpg
Fluocinolone acetonide oil, 0.01% (ear drops) contain fluocinolone acetonide {(6α, 11β, 16α)-6,9- difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for the treatment of atopic dermatitis and fluocinolone acetonide topical oil, 0.01% (scalp oil) for the treatment of psoriasis of scalp. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil, 0.01% (ear drops) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF.
Fluocinolone acetonide topical oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β,16α)-6,9-difluoro-11,21-dihydroxy-16,17 [(1-methylethylidene)bis(oxy)]-pregna-1,4 diene-3,20- dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone acetonide topical oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide topical oil has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2, and refined peanut oil. Fluocinolone acetonide topical oil is formulated with 48% refined peanut oil NF. Physicians should use caution in prescribing Fluocinolone Acetonide 0.01% Topical Oil for peanut-sensitive individuals. Chemical Structure
Fluocinolone acetonide Scalp Oil, 0.01% contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide, 0.01% for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide scalp oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide scalp oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Chemical Structure
Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide, USP (6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis-(oxy)]-pregna-1,4-diene-3,20-dione, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01%, fluocinolone acetonide for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older and as fluocinolone acetonide oil, 0.01% for chronic eczematous external otitis. Chemically, fluocinolone acetonide, USP is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide, USP in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.49. It is a white to almost white, crystalline powder and melts at about 270°C with decomposition; practically insoluble in water and heptane, soluble in methanol, anhydrous ethanol and acetone, slightly soluble in ether and chloroform. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide, USP in a blend of oils, which contains anhydrous citric acid, isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. chemical-structure
Fluocinolone Acetonide Ointment 0.025% is intended for topical administration. The active component is the corticosteroid Fluocinolone Acetonide USP (Pregna-1,4-diene-3,20-dione, 6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α,11β,16α)-. It has an empirical formula of C 24 H 30 F 2 O 6 and a molecular weight of 452.49 (CAS Registry Number 67-73-2). Each gram of the ointment contains 0.25 mg Fluocinolone Acetonide in a base containing White Petrolatum. chemical structure
Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone Acetonide Topical Oil, 0.01% is formulated with 48% refined peanut oil NF. Physicians should use caution in prescribing Fluocinolone Acetonide Topical Oil, 0.01% for peanut-sensitive individuals. Structural Formula
Fluocinolone acetonide oil, 0.01% (ear drops) contain fluocinolone acetonide {(6α, 11β, 16α)-6,9- difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for the treatment of atopic dermatitis and fluocinolone acetonide topical oil, 0.01% (scalp oil) for the treatment of psoriasis of scalp. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil, 0.01% (ear drops) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF.
Fluocinolone Acetonide Oil, 0.01% Ear Drops contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16, 17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil ear drops contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide oil ear drops is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide oil ear drops is heated just below 232°C (450°F) for at least 15 minutes. Chemical Structure
Fluocinolone acetonide oil, 0.01% (ear drops) contain fluocinolone acetonide {(6α, 11β, 16α)-6,9- difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for the treatment of atopic dermatitis and fluocinolone acetonide topical oil, 0.01% (scalp oil) for the treatment of psoriasis of scalp. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil, 0.01% (ear drops) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. structure
Fluocinolone Acetonide Topical Oil, 0.01% (Scalp Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% (Scalp Oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Fluocinolone acetonide topical oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide topical oil is heated just below 232°C (450°F) for at least 15 minutes. Chemical Structure
Fluocinolone acetonide topical oil, 0.01% (body oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6, 9-difluoro-11, 21-dihydroxy-16, 17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (scalp oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% (ear drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (body oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% (body oil) is formulated with 48% refined peanut oil NF. structure
Fluocinolone acetonide topical oil, 0.01% (scalp oil) contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (body oil) for use as body oil for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as fluocinolone acetonide oil, 0.01% (ear drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (scalp oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contain isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.
Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Fluocinolone acetonide topical oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide topical oil is heated just below 232°C (450°F) for at least 15 minutes. Structural Formula
The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Fluocinolone Acetonide is included in this class of synthetic corticosteroids. Chemically Fluocinolone Acetonide is Pregna-1,4-diene-3,20-dione, 6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α, 11β, 6α)-), with the molecular formula C 24 H 30 F 2 0 6 , a molecular weight of 452.49 and the following structural formula: Each gram of Fluocinolone Acetonide Cream, USP 0.01% contains 0.1 mg fluocinolone acetonide USP in a water washable cream base consisting of mineral oil (and) lanolin alcohols, isopropyl palmitate NF, propylene glycol stearate, cetyl alcohol NF, sorbitan monostearate NF, polysorbate 60 NF, sorbic acid NF, polyoxyl (40) stearate NF, purified water USP, propylene glycol USP with propylparaben NF and methylparaben NF as preservatives. Each gram of Fluocinolone Acetonide Ointment, USP 0.025% contains 0.25 mg of fluocinolone acetonide USP in an ointment base consisting of light mineral oil NF and white petrolatum USP. Chemical Structure
Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide 0.01% Solution (each mL contains 0.1 mg Fluocinolone Acetonide) in a water-washable base containing citric acid and propylene glycol. Chemical Structure
Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide USP (Pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-, (6α,11β,16α)-); it has an empirical formula of C 24 H 30 F 2 O 6 and a molecular weight of 425.49. Each mL of the topical solution contains 0.1 mg fluocinolone acetonide in a water-washable base containing propylene glycol and citric acid. chemical-structure
Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water washable base of citric acid and propylene glycol. Chemical Structure
Fluocinolone Acetonide Cream USP, 0.01% and 0.025% are intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Cream USP, 0.01% contains 0.1 mg/g of fluocinolone acetonide USP and Fluocinolone Acetonide Cream USP, 0.025% contains 0.25 mg/g of fluocinolone acetonide USP in a water-washable aqueous base of butylated hydroxytoluene, cetyl alcohol, citric acid, edetate disodium, methylparaben and propylparaben (preservatives), mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, simethicone, stearyl alcohol, water (purified) and white wax. Structure
Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Scalp Oil) for use with shower caps for treatment of scalp psoriasis in adults and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone Acetonide Topical Oil, 0.01% is formulated with 48% refined peanut oil NF. Physicians should use caution in prescribing Fluocinolone Acetonide Topical Oil, 0.01% for peanut-sensitive individuals.
Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.
Fluocinolone acetonide topical oil, 0.01% (body oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6, 9-difluoro-11, 21-dihydroxy-16, 17 [(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as fluocinolone acetonide topical oil, 0.01% (scalp oil) for use with shower caps for treatment of scalp psoriasis in adults, and as fluocinolone acetonide oil, 0.01% (ear drops) for treatment of chronic eczematous external otitis. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% (body oil) contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% (body oil) is formulated with 48% refined peanut oil NF.
Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16, 17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide topical oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. structure
Fluocinolone Acetonide Oil (Ear Drops) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16, 17[(1-methylethylidene)bis(oxy)]- pregna-1,4-diene3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide oil contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Fluocinolone acetonide oil is formulated with 48% refined peanut oil. The bulk refined peanut oil, used in fluocinolone acetonide oil is heated between 232°C - 246°C (450°F - 475°F) for at least 15 minutes, which should provide for adequate decomposition of allergenic proteins. Fluocinolone -structure.jpg
Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide in fluocinolone acetonide topical oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Fluocinolone acetonide topical oil, 0.01% is formulated with 48% refined peanut oil NF. Physicians should use caution in prescribing fluocinolone acetonide topical oil, 0.01% for peanut-sensitive individuals. structure.jpg
Fluocinolone Acetonide Topical Oil, 0.01% (Scalp Oil) contains fluocinolone acetonide [(6α, 11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17[(1– methylethylidene) bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone], a synthetic corticosteroid for topical dermatologic use. Chemically, fluocinolone acetonide is C 24 H 30 F 2 O 6 . It has the following structural formula: Fluocinolone acetonide has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of fluocinolone acetonide topical oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic. Fluocinolone acetonide topical oil, 0.01% is formulated with 48% refined peanut oil. The bulk refined peanut oil used in fluocinolone acetonide topical oil, 0.01% is heated between 232°C - 246°C (450°F - 475°F) for at least 15 minutes which should provide for adequate decomposition of allergenic proteins. structure.jpg
Fluocinolone acetonide topical solution, USP 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, USP, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone acetonide topical solution, USP contains fluocinolone acetonide, USP (anhydrous) 0.1 mg/mL in a water-washable base of citric acid anhydrous and propylene glycol. formula
Fluocinolone Acetonide Topical Solution, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1, 4-diene-3, 20-dione, 6, 9-difluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene) bis (oxy)]-, (6α, 11β, 16α)-. It has the following chemical structure: Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water-washable base of anhydrous citric acid and propylene glycol. structure.jpg
Fluocinolone Acetonide Topical Solution, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1, 4-diene-3, 20-dione, 6, 9-difluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene) bis (oxy)]-, (6α, 11β, 16α)-. It has the following chemical structure: Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water-washable base of anhydrous citric acid and propylene glycol.
Fluocinolone Acetonide Topical Solution, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1, 4-diene-3, 20-dione, 6, 9-difluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene) bis (oxy)]-, (6α, 11β, 16α)-. It has the following chemical structure: Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water-washable base of anhydrous citric acid and propylene glycol.
ILUVIEN is a sterile non-bioerodable intravitreal implant containing 0.19 mg (190 mcg) fluocinolone acetonide in a 36-month sustained-release drug delivery system. ILUVIEN is designed to release fluocinolone acetonide at an initial rate of 0.25 mcg/day. ILUVIEN is preloaded into a single-use applicator to facilitate injection of the implant directly into the vitreous. The drug substance is a synthetic corticosteroid, fluocinolone acetonide. The chemical name for fluocinolone acetonide is (6α,11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-pregna-1,4-diene-3,20-dione. Its chemical structure is: MW 452.50; molecular formula C 24 H 30 F 2 0 6 Fluocinolone acetonide is a white or almost white, microcrystalline powder, practically insoluble in water, soluble in methanol, ethanol, chloroform and acetone, and sparingly soluble in ether. Each ILUVIEN consists of a light brown 3.5mm x 0.37mm implant containing 0.19 mg of the active ingredient fluocinolone acetonide and the following inactive ingredients: polyimide tube, polyvinyl alcohol, silicone adhesive and water for injection. iluvien-figure-3
NEO-SYNALAR ® cream is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-, and the antibacterial neomycin sulfate. Fluocinolone acetonide has the following chemical structure: The cream contains neomycin sulfate 5 mg/g (3.5 mg/g neomycin base) and fluocinolone acetonide 0.25 mg/g in a water-washable aqueous base of butylated hydroxytoluene, cetyl alcohol, citric acid, edetate disodium, methylparaben and propylparaben (preservatives), mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, simethicone, stearyl alcohol, water (purified) and white wax. Chemical Structure
RETISERT ® (fluocinolone acetonide intravitreal implant) 0.59 mg is a sterile implant designed to release fluocinolone acetonide locally to the posterior segment of the eye at a nominal initial rate of 0.6 mcg/day, decreasing over the first month to a steady state between 0.3-0.4 mcg/day over approximately 30 months. The drug substance is the synthetic corticosteroid fluocinolone acetonide, represented by the following structural formula: C 24 H 30 F 2 O 6 Mol. Wt. 452.50 Chemical Name: Pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methyl-ethylidene)bis(oxy)],(6α,11β ,16α)-. Fluocinolone acetonide is a white crystalline powder, insoluble in water, and soluble in methanol. It has a melting point of 265-266ºC. Each RETISERT consists of a tablet containing 0.59 mg of the active ingredient, Fluocinolone Acetonide, USP, and the following inactives: magnesium stearate, microcrystalline cellulose, and polyvinyl alcohol. chemical structure
SYNALAR ® (fluocinolone acetonide) Cream 0.025% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: SYNALAR ® Cream contains fluocinolone acetonide 0.25 mg/g in a water-washable aqueous base of butylated hydroxytoluene, cetyl alcohol, citric acid, edetate disodium, methylparaben and propylparaben (preservatives), mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, simethicone, stearyl alcohol, water (purified) and white beeswax. Chemical Structure
SYNALAR ® (fluocinolone acetonide) Ointment 0.025% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: SYNALAR ® Ointment contains fluocinolone acetonide 0.25 mg/g in a white petrolatum USP vehicle. Chemical Structure
TRI-LUMA (fluocinolone acetonide, hydroquinone, and tretinoin) Cream, 0.01%/4%/0.05% contains fluocinolone acetonide, USP, hydroquinone, USP, and tretinoin, USP, in a light yellow, hydrophilic cream base for topical application. Fluocinolone acetonide is a synthetic fluorinated corticosteroid. It is a white crystalline powder that is odorless and stable in light. The chemical name for fluocinolone acetonide is: (6α,11β,16α)-6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-pregna-1,-4-diene-3,20-dione. The molecular formula is C 24 H 30 F 2 O 6 and molecular weight is 452.50. Fluocinolone acetonide has the following structural formula: Hydroquinone is a melanin synthesis inhibitor. It is prepared from the reduction of p -benzoquinone with sodium bisulfite. It occurs as fine white needles that darken on exposure to air. The chemical name for hydroquinone is: 1,4-benzenediol. The molecular formula is C 6 H 6 O 2 and molecular weight is 110.11. Hydroquinone has the following structural formula: Tretinoin, a retinoid, is all- trans -retinoic acid formed from the oxidation of the aldehyde group of retinene to a carboxyl group. It occurs as yellow to light-orange crystals or crystalline powder with a characteristic odor of ensilage. It is highly reactive to light and moisture. The chemical name for tretinoin is: ( all-E )-3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8-nonatetraenoic acid. The molecular formula is C 20 H 28 O 2 and molecular weight is 300.44. Tretinoin has the following structural formula: Each gram of TRI-LUMA Cream contains Active: fluocinolone acetonide 0.01% (0.1 mg), hydroquinone 4% (40 mg), and tretinoin 0.05% (0.5 mg). Inactive: butylated hydroxytoluene, cetyl alcohol, citric acid anhydrous, glycerin, glyceryl stearate, magnesium aluminum silicate, methyl gluceth-10, methylparaben, PEG-100 stearate, propylparaben, purified water, sodium metabisulfite, stearic acid, and stearyl alcohol. fluocinolone-mol hydro-mol tretinoin
YUTIQ is a sterile non-bioerodible intravitreal implant containing 0.18 mg fluocinolone acetonide in a 36-month sustained-release drug delivery system. YUTIQ is designed to release fluocinolone acetonide at an initial rate of 0.25 mcg/day. YUTIQ is preloaded into a single-dose applicator to facilitate injection of the implant directly into the vitreous. The drug substance is a synthetic corticosteroid, fluocinolone acetonide. The chemical name for fluocinolone acetonide is (6α,11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-pregna-1,4-diene-3,20-dione. Its chemical structure is: MW 452.50; molecular formula C 24 H 30 F 2 0 6 Fluocinolone acetonide is a white or almost white, microcrystalline powder, practically insoluble in water, soluble in methanol, ethanol, chloroform and acetone, and sparingly soluble in ether. Each YUTIQ consists of a light brown 3.5mm x 0.37mm implant containing 0.18 mg of the active ingredient fluocinolone acetonide and the following inactive ingredients: polyimide tube, polyvinyl alcohol, silicone adhesive and water for injection. Chemical Structure
YUTIQ is a sterile non-bioerodible intravitreal implant containing 0.18 mg fluocinolone acetonide in a 36-month sustained-release drug delivery system. YUTIQ is designed to release fluocinolone acetonide at an initial rate of 0.25 mcg/day. YUTIQ is preloaded into a single-dose applicator to facilitate injection of the implant directly into the vitreous. The drug substance is a synthetic corticosteroid, fluocinolone acetonide. The chemical name for fluocinolone acetonide is (6α,11β, 16α)-6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-pregna-1,4-diene-3,20-dione. Its chemical structure is: MW 452.50; molecular formula C 24 H 30 F 2 0 6 Fluocinolone acetonide is a white or almost white, microcrystalline powder, practically insoluble in water, soluble in methanol, ethanol, chloroform and acetone, and sparingly soluble in ether. Each YUTIQ consists of a light brown 3.5mm x 0.37mm implant containing 0.18 mg of the active ingredient fluocinolone acetonide and the following inactive ingredients: polyimide tube, polyvinyl alcohol, silicone adhesive and water for injection. Chemical Structure
About fluocinolone acetonide
This collection groups medications in our database that include fluocinolone acetonide. It currently includes 48 matching listings. Open a result to review formulation details, related brands, manufacturers, and product labels.
What You Can Review
Use this page to find products that share the same indexed ingredient name, then open drug detail pages for dosage, labeling, and related navigation.
Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice.