dolutegravir sodium - Medications

DOVATO is a fixed-dose combination tablet containing dolutegravir (as dolutegravir sodium), an integrase strand transfer inhibitor (INSTI), and lamivudine (also known as 3TC), a nucleoside analogue reverse transcriptase inhibitor (NRTI). DOVATO tablets are for oral administration. Each film-coated tablet contains the active ingredients 50 mg of dolutegravir (equivalent to 52.6 mg dolutegravir sodium) and 300 mg of lamivudine and the inactive ingredients magnesium stearate, mannitol, microcrystalline cellulose, povidone K29/32, sodium starch glycolate, sodium stearyl fumarate. The tablet film-coating contains the inactive ingredients hypromellose, polyethylene glycol, titanium dioxide. Dolutegravir The chemical name of dolutegravir sodium is sodium (4 R ,12a S )-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2 H -pyrido[1',2':4,5]pyrazino[2,1- b ][1,3]oxazin-7-olate. The empirical formula is C 20 H 18 F 2 N 3 NaO 5 , and the molecular weight is 441.36 g/mol. It has the following structural formula: Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g/mol. It has the following structural formula: Lamivudine is a white to off‑white crystalline solid and is soluble in water. Dolutegravir sodium chemical structure Lamivudine chemical structure

JULUCA is a fixed-dose combination tablet containing dolutegravir (as dolutegravir sodium), an INSTI, and rilpivirine (as rilpivirine hydrochloride), an NNRTI. The chemical name of dolutegravir sodium is sodium (4 R ,12a S )-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2 H -pyrido[1',2':4,5]pyrazino[2,1- b ][1,3]oxazin-7-olate. The empirical formula is C 20 H 18 F 2 N 3 NaO 5, and the molecular weight is 441.36 g/mol. It has the following structural formula: Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22 H 18 N 6 • HCl and its molecular weight is 402.88 g/mol. Rilpivirine hydrochloride has the following structural formula: Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. JULUCA tablets are for oral administration. Each film-coated tablet contains the active ingredients 50 mg of dolutegravir (equivalent to 52.6 mg dolutegravir sodium) and 25 mg of rilpivirine (equivalent to 27.5 mg rilpivirine hydrochloride) and the inactive ingredients croscarmellose sodium, D-mannitol, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 20, povidone K29/32 and K30, silicified microcrystalline cellulose, sodium starch glycolate, and sodium stearyl fumarate. The tablet film‑coating contains the inactive ingredients iron oxide red, iron oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc, and titanium dioxide. Dolutegravir sodium chemical structure Rilpivirine hydrochloride chemical structure

TIVICAY contains dolutegravir, as dolutegravir sodium, an HIV INSTI. The chemical name of dolutegravir sodium is sodium (4 R ,12a S )-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2 H -pyrido[1',2':4,5]pyrazino[2,1- b ][1,3]oxazin-7-olate. The empirical formula is C 20 H 18 F 2 N 3 NaO 5, and the molecular weight is 441.36 g/mol. It has the following structural formula: Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Each film-coated tablet of TIVICAY for oral administration contains 10.5, 26.3, or 52.6 mg of dolutegravir sodium, which is equivalent to 10, 25, or 50 mg dolutegravir free acid, respectively, and the following inactive ingredients: D-mannitol, microcrystalline cellulose, povidone K29/32, sodium starch glycolate, and sodium stearyl fumarate. The tablet film‑coating contains the inactive ingredients iron oxide yellow (25-mg and 50-mg tablets only), macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc, and titanium dioxide. Each TIVICAY PD tablet for oral suspension contains 5.26 mg of dolutegravir sodium, which is equivalent to 5 mg dolutegravir free acid, and the following inactive ingredients: calcium sulfate dihydrate, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, strawberry cream flavor, sucralose, and sodium stearyl fumarate. The tablet film-coating contains hypromellose, polyethylene glycol, and titanium dioxide. Dolutegravir chemical structure

TIVICAY contains dolutegravir, as dolutegravir sodium, an HIV INSTI. The chemical name of dolutegravir sodium is sodium (4 R ,12a S )-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2 H -pyrido[1',2':4,5]pyrazino[2,1- b ][1,3]oxazin-7-olate. The empirical formula is C 20 H 18 F 2 N 3 NaO 5, and the molecular weight is 441.36 g/mol. It has the following structural formula: Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Each film-coated tablet of TIVICAY for oral administration contains 10.5, 26.3, or 52.6 mg of dolutegravir sodium, which is equivalent to 10, 25, or 50 mg dolutegravir free acid, respectively, and the following inactive ingredients: D-mannitol, microcrystalline cellulose, povidone K29/32, sodium starch glycolate, and sodium stearyl fumarate. The tablet film‑coating contains the inactive ingredients iron oxide yellow (25-mg and 50-mg tablets only), macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc, and titanium dioxide. Each TIVICAY PD tablet for oral suspension contains 5.26 mg of dolutegravir sodium, which is equivalent to 5 mg dolutegravir free acid, and the following inactive ingredients: calcium sulfate dihydrate, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, strawberry cream flavor, sucralose, and sodium stearyl fumarate. The tablet film-coating contains hypromellose, polyethylene glycol, and titanium dioxide. Dolutegravir chemical structure

TRIUMEQ and TRIUMEQ PD TRIUMEQ and TRIUMEQ PD contain an INSTI (dolutegravir) and 2 nucleoside analogues (abacavir and lamivudine) with inhibitory activity against HIV. Each film-coated tablet of TRIUMEQ, for oral use, contains 600 mg of abacavir (present as 702 mg of abacavir sulfate), 50 mg of dolutegravir (present as 52.6 mg of dolutegravir sodium), and 300 mg of lamivudine. The inactive ingredients of TRIUMEQ tablets include D-mannitol, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The tablet film‑coating contains the inactive ingredients iron oxide black, iron oxide red, macrogol/PEG, polyvinyl alcohol–part hydrolyzed, talc, and titanium oxide. Each film-coated tablet of TRIUMEQ PD for oral suspension contains 60 mg of abacavir (present as 70.2 mg of abacavir sulfate), 5 mg of dolutegravir (present as 5.26 mg of dolutegravir sodium), and 30 mg of lamivudine. The inactive ingredients of TRIUMEQ PD tablets include acesulfame potassium, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, strawberry cream flavor and sucralose. The tablet film-coating contains the inactive ingredients: ferric oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. Abacavir Sulfate The chemical name of abacavir sulfate is ( 1 S,cis)- 4-[2-amino-6-(cyclopropylamino)-9 H -purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). It has a molecular formula of (C 14 H 18 N 6 O) 2• H 2 SO 4 and a molecular weight of 670.76 g/mol. It has the following structural formula: Abacavir sulfate is a white to off-white solid and is soluble in water. Dolutegravir Sodium The chemical name of dolutegravir sodium is sodium (4 R ,12a S )-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2 H -pyrido[1',2':4,5]pyrazino[2,1- b ][1,3]oxazin-7-olate. The empirical formula is C 20 H 18 F 2 N 3 NaO 5 and the molecular weight is 441.36 g/mol. It has the following structural formula: Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g/mol. It has the following structural formula: Lamivudine is a white to off-white crystalline solid and is soluble in water. Abacavir sulfate chemical structure Dolutegravir sodium chemical structure Lamivudine chemical structure