zydus lifesciences limited - Medication Listings
Browse 258 medications manufactured by zydus lifesciences limited. Open a product record to review dosage forms, strengths, packaging, and related navigation.
Propafenone hydrochloride, USP is an antiarrhythmic drug supplied in extended-release capsules of 225 mg, 325 mg, and 425 mg for oral administration. Chemically, propafenone hydrochloride, USP is 2'-[2-hydroxy-3-(propylamino)-propoxy]-3- phenylpropiophenone hydrochloride, with a molecular weight of 377.9. The molecular formula is C 21 H 27 NO 3 •HCl. Propafenone hydrochloride, USP has some structural similarities to beta-blocking agents. The structural formula of propafenone hydrochloride, USP is given below: Propafenone hydrochloride, USP occurs as white powder. It is soluble in hot water and methanol and slightly soluble in chloroform. Propafenone hydrochloride extended-release capsules, USP are filled with white to off-white minitablets containing propafenone hydrochloride, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate and silicon dioxide. In addition, each capsule contains gelatin, sodium lauryl sulphate and titanium dioxide. The 325 mg capsules also contain FD&C Blue 1 and FD & C Red 40. The 425 mg capsules also contain FD & C Red 3, FD & C Red 40 and FD & C Yellow 6. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution method and acceptance criterion differ from the USP dissolution specification. Image
Summary not available yet.
Pyridostigmine bromide tablets, USP are an orally active cholinesterase inhibitor. Chemically, pyridostigmine bromide is 3-hydroxy-1-methylpyridinium bromide dimethylcarbamate. Its structural formula is: Pyridostigmine bromide, USP is a white or almost white crystalline, deliquescent powder. It is very soluble in water and in alcohol, slightly soluble in hexane, practically insoluble in ether. Each pyridostigmine bromide tablet, USP intended for oral administration contains 60 mg of pyridostigmine bromide, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, low substituted hydroxypropyl cellulose, silicon dioxide and stearic acid. figure
Summary not available yet.
Summary not available yet.
Ranolazine extended-release tablets are available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C 24 H 33 N 3 O 4 , a molecular weight of 427.54 g/mole, and the following structural formula: Ranolazine is a white to off-white solid. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: ferrosoferric oxide, hypromellose, iron oxide yellow, magnesium stearate, methacrylic acid copolymer type C (contains polysorbate 80 and sodium lauryl sulfate), microcrystalline cellulose, polyethylene glycol, sodium hydroxide, titanium dioxide and talc. Additional inactive ingredient for the 500 mg tablets include iron oxide red. Structure
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Selexipag tablets contains selexipag, a prostacyclin receptor agonist. The chemical name of selexipag is 2-{4-[(5,6-diphenylpyrazin-2-yl)(isopropyl)amino]butoxy}- N (methylsulfonyl) acetamide. It has a molecular formula of C 26 H 32 N 4 O 4 S and a molecular weight of 496.62. Selexipag has the following structural formula: Selexipag is an off white to pale yellow crystalline powder that is practically insoluble in water. In the solid state selexipag is very stable, is not hygroscopic, and is not light sensitive. Depending on the dose strength, each round film-coated tablet for oral administration contains 200 mcg, 400 mcg, 600 mcg, 800 mcg, 1,000 mcg, 1,200 mcg, 1,400 mcg, or 1,600 mcg of selexipag. The tablets include the following inactive ingredients: corn starch, colloidal silicon dioxide, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, microcrystalline cellulose and magnesium stearate. The tablets are film coated with a coating material containing hypromellose, propylene glycol, carnauba wax, titanium dioxide, along with mixtures of ferrosoferric oxide, iron oxide red or iron oxide yellow. Image
Summary not available yet.
Sildenafil for oral suspension, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate, USP is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula: Sildenafil citrate, USP is a white or almost white crystalline powder with a solubility of 10mg/100ml in water and a molecular weight of 666.7. Sildenafil for oral suspension is supplied as white to off-white granular powders containing 1.57 g of sildenafil citrate (equivalent to 1.12 g sildenafil) in an amber glass bottle and in HDPE bottle intended for reconstitution. Following reconstitution with 90 mL water, the volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include sorbitol, citric acid anhydrous, sucralose, tri-sodium citrate dihydrate, xanthan gum, titanium dioxide, sodium benzoate, colloidal silicon dioxide, carbomer homopolymer and grape flavor. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided. Image
Summary not available yet.
Sitagliptin Tablets contain sitagliptin free base, an orally active inhibitor of the DPP-4 enzyme. Sitagliptin free base is described chemically as 7-[(3 R )-3-amino-1-oxo-4-(2,4,5-trifluorophenyl)butyl]-5,6,7,8-tetrahydro-3-(trifluoromethyl)-1,2,4-triazolo[4,3- a ]pyrazine. The empirical formula is C 16 H 15 F 6 N 5 O and the molecular weight is 407.31. The structural formula is: Sitagliptin free base is a white to off-white, non-hygroscopic powder. Sitagliptin free base is soluble in methanol and slightly soluble in water. Each film coated tablet of sitagliptin contains sitagliptin free base 25 mg, 50 mg, or 100 mg as active ingredient and the following inactive ingredients: anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, malic acid, magnesium stearate, microcrystalline cellulose, and povidone. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. The 50 mg tablet's film coating also contains ferrosoferric oxide and iron oxide yellow. The 100 mg tablet's film coating also contains FD&C Yellow #6 Aluminum Lake and iron oxide yellow. Image
Summary not available yet.
Sitagliptin and metformin hydrochloride tablets (sitagliptin and metformin HCl) tablets for oral use contain sitagliptin and metformin HCl. Sitagliptin Sitagliptin is an orally-active inhibitor of DPP-4 enzyme. Sitagliptin is present in sitagliptin and metformin hydrochloride tablets tablets in the form of sitagliptin free base. Sitagliptin free base is described chemically as 7-[(3R)-3-amino-1-oxo-4-(2,4,5-trifluorophenyl)butyl]-5,6,7,8-tetrahydro-3 (trifluoromethyl)-1,2,4-triazolo[4,3-a]pyrazine with an empirical formula of C 16 H 15 F 6 N 5 O and a molecular weight of 407.31. The structural formula is: Sitagliptin free base is a white to off-white, non-hygroscopic powder. It is soluble in methanol and slightly soluble in water. Metformin HCl USP Metformin HCl, USP ( N,N -dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. Metformin HCl, USP is a white crystalline powder with a molecular formula of C 4 H 11 N 5 •HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown: Sitagliptin and metformin hydrochloride tablets is available as film-coated tablets containing: 50 mg of sitagliptin and 389.93 mg of metformin equivalent to 500 mg metformin HCl (sitagliptin and metformin hydrochloride tablets 50/500). 50 mg of sitagliptin and 779.86 mg of metformin equivalent to 1,000 mg metformin HCl (sitagliptin and metformin hydrochloride tablets 50/1,000). Each film-coated tablet of sitagliptin and metformin hydrochloride tablets contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, low substituted hydroxypropylcellulose, magnesium stearate, malic acid, microcrystalline cellulose, povidone, and sodium stearyl fumarate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. The film coating of 50 mg/1,000 mg also contains: FD&C yellow #6 aluminum lake, iron oxide red, and iron oxide yellow. Structure Structure
Spironolactone tablets, USP contain 25 mg, 50 mg, or 100 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21-carboxylic acid γ-lactone acetate, which has the following structural formula: Spironolactone, USP is practically insoluble in water, soluble in ethyl acetate and alcohol, freely soluble in benzene and in chloroform, slightly soluble in menthanol and very slightly soluble in fixed oils. Inactive ingredients include calcium sulfate dihydrate, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, peppermint flavor, povidone and sodium lauryl sulfate. Additionally each tablet contains opadry II white 33F28398 which contains hydroxylpropyl methyl cellulose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide. Image
Summary not available yet.
Sucralfate tablets, USP contain sucralfate USP and sucralfate is an α-D-glucopyranoside, β-D fructofuranosyl-, octakis-(hydrogen sulfate), aluminum complex. Tablets for oral administration contain 1 g of sucralfate, USP. Also contain: magnesium stearate, microcrystalline cellulose, and corn starch. Therapeutic category: antiulcer. figure
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Tiadylt (diltiazem hydrochloride) is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5 H )-one, 3-(acetyloxy)-5-[2(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)- cis -. The chemical structure is: Diltiazem hydrochloride, USP is a white, odourless, crystalline powder or small crystals. It is freely soluble in chloroform, in formic acid, in methanol, and in water; sparingly soluble in dehydrated alcohol; insoluble in ether and has a molecular weight of 450.98. Diltiazem hydrochloride extended-release capsules, USP contain diltiazem hydrochloride in extended-release beads at doses of 120, 180, 240, 300, 360 and 420 mg. Each Tiadylt ® ER capsules, USP intended for oral administration contains 120 mg or 180 mg or 240 mg or 300 mg or 360 mg or 420 mg of diltiazem hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, ethyl cellulose, gelatin, hypromellose, polyethylene glycol, sugar sphere, talc and titanium dioxide. Additionally each 120 mg, 240 mg and 300 mg capsule shell contains FD & C blue # 1, FD & C red # 3 and FD & C red # 40; each 180 mg and 360 mg capsule shell contains FD & C blue # 1 and FD & C red # 3. Each capsule is printed with black pharmaceutical ink which contains black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. For oral administration. Meets USP Dissolution test 18. figure
Should overdose occur, ensure the adequacy of an airway and monitor cardiovascular and respiratory function. Dialysis is not likely to be an efficient method of removing tizanidine from the body [see Description (11) ] . In general, symptoms resolve within one to three days following discontinuation of tizanidine and administration of appropriate therapy. Because of the similar mechanism of action, symptoms and management of tizanidine overdose are similar to that following clonidine overdose. For the most recent information concerning the management of overdose, contact a poison control center. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine is slightly soluble in water and methanol. Each tizanidine tablet intended for oral administration contains 2.29 mg or 4.58 mg of tizanidine hydrochloride USP, which is equivalent to 2 mg or 4 mg of tizanidine base. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose and stearic acid. Meets USP Dissolution Test 2. figure
Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha 2 -adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C 9 H 8 ClN 5 S-HCl and a molecular weight of 290.2. Its structural formula is: Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide. figure
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Ursodiol is a bile acid available as 300 mg capsules suitable for oral administration. Ursodiol, USP (ursodeoxycholic acid), is a naturally occurring bile acid found in small quantities in normal human bile and in the biles of certain other mammals. It is a white or almost white crystalline powder, freely soluble in alcohol and glacial acetic acid; slightly soluble in chloroform and ether; and practically insoluble in water. The chemical name for ursodiol is 3α,7β-dihydroxy-5β-cholan-24-oic acid (C 24 H 40 O 4 ). Ursodiol, USP has a molecular weight of 392.6 g/mol. Its structure is shown below: Inactive Ingredients: Hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and sodium starch glycolate type A. Capsule contains gelatin, FD & C Blue 1, FD & C Red 3 and titanium dioxide. The capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution method differ from the USP. Image
Ursodiol Tablets, USP 250 mg is available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg is available as a scored film-coated tablet for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a bitter-tasting white powder consisting of crystalline particles freely soluble in ethanol and glacial acetic acid, slightly soluble in chloroform, sparingly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C 24 H 40 O 4 ). Ursodiol has a molecular weight of 392.56. Its structure is shown below. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate. The inert ingredients in film coating material are: hypromellose, polyethylene glycol, titanium dioxide. Image
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Summary not available yet.
Vigabatrin Tablets, USP is an oral antiepileptic drug and is available as a white to off-white film-coated 500 mg tablets. The chemical name of vigabatrin USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C 6 H 11 NO 2 and the molecular weight is 129.16. It has the following structural formula: Vigabatrin, USP is a white or almost white powder which is freely soluble in water, slightly soluble in methanol; practically insoluble in methylene chloride. The pH of a 1% aqueous solution is about 6.9. The noctanol/ water partition coefficient of vigabatrin, USP is about 0.011 (log P=-1.96) at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Each vigabatrin tablet contains 500 mg of vigabatrin, USP. The inactive ingredients are hydroxypropyl methylcellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide. FDA approved dissolution test specifications differ from USP. Image
Vigabatrin, USP is an oral antiepileptic drug and is available as a white to off-white granular powder for oral solution in packets of 500 mg. The chemical name of vigabatrin USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C 6 H 11 NO 2 and the molecular weight is 129.16. It has the following structural formula: Vigabatrin, USP is a white or almost white powder which is freely soluble in water and slightly soluble in methanol. The pH of a 1% aqueous solution is about 6.9. The n-octanol/water partition coefficient of vigabatrin, USP is about 0.011 (log P=- 1.96) at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Vigabatrin for oral solution, USP is available as a white to off-white granular powder. Each packet contains 500 mg of vigabatrin, USP. The inactive ingredient is povidone. Image
Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is: Voriconazole is designated chemically as (2R,3S)-2-(2,4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H -1,2,4-triazol-1-yl)-2-butanol with an molecular formula of C 16 H 14 F 3 N 5 O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Each voriconazole tablet intended for oral administration contains 50 mg or 200 mg of voriconazole. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and pregelatinized starch. Additionally, each voriconazole tablets contain opadry II white 33F28398 which contains hypromellose, lactose monohydrate, polyethylene glycol, talc and titanium dioxide. Image
About zydus lifesciences limited
This collection groups medications in our database that are associated with zydus lifesciences limited. It currently includes 258 matching listings. Open any result to review label-backed details such as dosage forms, ingredients, packaging, and related navigation.
What You Can Review
Use this page to move from manufacturer-level browsing into specific drug detail pages. Each listing gives you a path to the underlying product record and related brand, generic, or substance pages.
Related Navigation
Some products may appear in multiple brand or generic contexts. Check individual listings for the exact naming used in the product data and to continue exploring.
Important Safety Information
Always consult with a qualified healthcare provider before starting, stopping, or changing any medication. The information provided on this page is for educational purposes only and does not constitute medical advice. Read medication labels and package inserts carefully before use.