winder laboratories llc - Medication Listings

Chlordiazepoxide Hydrochloride and Clidinium Bromide Capsules is a fixed-combination of chlordiazepoxide hydrochloride, a benzodiazepine, and clidinium bromide, an anticholinergic. Each Chlordiazepoxide Hydrochloride and Clidinium Bromide capsule contains the active ingredients 5 mg chlordiazepoxide hydrochloride and 2.5 mg clidinium bromide. Each capsule also contains the inactive ingredients lactose monohydrate, pregelatinized starch, talc, ammonia solution, FC&C blue #1, FC&C red #40, FC&C yellow #6, propylene glycol, shellac, titanium dioxide, and gelatin. Chlordiazepoxide hydrochloride is 7-chloro-2-methylamino-5-phenyl-3H-1,4-benzodiazepine 4-oxide hydrochloride. A white to slightly yellow, crystalline powder and it is soluble in water. It is unstable in solution and the powder must be protected from light. The molecular weight is 336.22. The structural formula of chlordiazepoxide hydrochloride is as follows: Clidinium bromide is a synthetic anticholinergic agent which has been shown in experimental and clinical studies to have a antispasmodic and antisecretory effects on the gastrointestinal tract. Structurally clidinium bromide is: FDA approved dissolution specification differs from the USP dissolution specification. Chemical Structure Chemical Structure

Dextroamphetamine sulfate, USP is the dextro isomer of the compound d,l -amphetamine sulfate, a sympathomimetic amine of the amphetamine group. Chemically, dextroamphetamine is d -alpha- methylphenethylamine, and is present in all forms of dextroamphetamine sulfate, USP as the neutral sulfate. The structural formula is as follows: (C 9 H 13 N) 2 ∙H 2 SO 4 M.W. 368.49 Inactive Ingredients Each tablet, for oral administration, contains dextroamphetamine sulfate, USP in either 2.5 mg, 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg or 30 mg. Each tablet also contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, microcrystalline cellulose and stearic acid. The 5 mg tablets also contain D&C RED #27 and FD&C Yellow #6. The 7.5 mg tablets also contain FD&C Blue #1 and D&C Yellow #10. The 10 mg tablets also contain FD&C Red #40, FD&C Yellow #6 and FD&C Blue #2. The 15 mg tablets also contain FD&C Blue #1, FD&C Blue #2, and FD&C Red #40. The 20 mg tablets also contain FD&C Blue #1 and D&C Red #27. The 30 mg tablets also contain D&C Yellow #10.

Each diphenoxylate hydrochloride and atropine sulfate tablet, USP contains: 2.5 mg of diphenoxylate hydrochloride USP (equivalent to 2.3 mg of diphenoxylate) and 0.025 mg of atropine sulfate USP (equivalent to 0.01 mg of atropine) Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3,3-diphenylpropyl)-4-phenylisonipecotate monohydrochloride and has the following structural formula: Atropine sulfate, an anticholinergic, is endo-(±)-α-(hydroxymethyl) benzeneacetic acid 8-methyl-8- azabicyclo[3.2.1] oct-3-yl ester sulfate (2:1) (salt) monohydrate and has the following structural formula: A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Inactive ingredients of Diphenoxylate hydrochloride and atropine sulfate tablets include colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid. Chemical Structure Chemical Structure

INDICATIONS AND USAGE For once daily self-applied systemic use as a dental caries preventive in pediatric patients. It has been established that ingestion of fluoridated drinking water (1 ppm F¯) during the period of tooth development results in a significant decrease in the incidence of dental caries. Sodium Fluoride Chewable Tablets were developed to provide systemic fluoride for use as a supplement in pediatric patients from age 3 years to age 16 years and older living in areas where the drinking water fluoride contents does not exceed 0.6 ppm F¯.

Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine). 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine). The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C 17 H 21 NO 3 )2•H 2 SO 4 •5Η 2 Ο, and it has the following chemical structure. Morphine sulfate, USP is a white to off-white crystalline powder or a fine white to light yellow powder. It is soluble in water and slightly soluble in alcohol, but is practically insoluble in chloroform or ether. The octanol:water partition coefficient of morphine is 1.42 at physiologic pH and the pK a is 7.9 for the tertiary nitrogen (the majority is ionized at pH 7.4). For the 10 mg per 5 mL (2 mg/mL) concentration: Each 5 mL of oral solution contains 10 mg of morphine sulfate, USP and the following inactive ingredients: citric acid anhydrous, disodium edetate, FD&C Green No. 3, glycerin, sodium benzoate, sorbitol, sucralose, and purified water. For the 20 mg per 5 mL (4 mg/mL) concentration: Each 5 mL of oral solution contains 20 mg of morphine sulfate, USP and the following inactive ingredients: citric acid anhydrous, disodium edetate, FD&C Green No. 3, glycerin, sodium benzoate, sorbitol, sucralose, and purified water. For the 100 mg per 5 mL (20 mg/mL) concentration (only for opioid tolerant adults) : Each 5 mL of oral solution contains 100 mg of morphine sulfate, USP and the following inactive ingredients: citric acid anhydrous, D&C Red No. 33, disodium edetate, glycerin, sodium benzoate, sorbitol, sucralose, and purified water. Chemical Structure

Rx Only * Daily Value (% DV) not established Active ingredients: Fluoride as sodium fluoride. Other Ingredients: Croscarmellose Sodium, Grape Flavor, Magnesium Stearate, Microcrystalline Cellulose, Stearic Acid, Sucrose. 0.25 mg also contains: D&C Red #27 Alum Lake and FD&C Yellow #6 Alum Lake. 0.5 mg also contains: FD&C Red #40 Alum Lake. 1.0 mg also contains: D&C Red #27 and FD&C Blue #1. Nutrition Fact

Phenazopyridine Hydrochloride is dark brown fine granular powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Phenazopyridine HCl tablets contain the following inactive ingredients: hypromellose, polyethylene glycol, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, maize(corn) starch, silicone dioxide, polyvinylpyrrolidone. image description

The barbiturates are nonselective central nervous system (CNS) depressants primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative for oral administration and occurs as a white, odorless, slightly bitter powder that is soluble in chloroform, freely soluble in alcohol or ether, and slightly soluble in water. Its saturated solution has a pH of about 5.6. Chemically, it is 5-ethyl-5-phenylbarbituric acid with the molecular formula C 12 H 12 N 2 O 3 (232.24). The structural formula is as follows: Each Phenobarbital Tablet, USP contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg, or 100 mg of phenobarbital, USP. Inactive ingredients are as follows: Microcrystalline Cellulose; Lactose Monohydrate; Sodium Starch Glycolate, Type-A; Colloidal Silicon Dioxide; Magnesium Stearate Chemical Structure

Each Phenohytro™ Tablet contains: Phenobarbital, USP..................................... 16.2 mg Hyoscyamine Sulfate, USP...................... 0.1037 mg Atropine Sulfate, USP .............................0.0194 mg Scopolamine Hydrobromide, USP ...........0.0065 mg Inactive Ingredients: Anhydrous Lactose, Calcium Stearate, Colloidal Silicon Dioxide, Corn Starch, and Microcrystalline Cellulose.

PHENOHYTRO ® ELIXIR Grape Flavored each 5 mL (teaspoonful) oral-administered dose of elixir contains: Phenobarbital, USP ( WARNING: may be habit forming) 16.2 mg Hyoscyamine Sulfate, USP 0.1037 mg Atropine Sulfate, USP 0.0194 mg Scopolamine Hydrobromide, USP 0.0065 mg Alcohol not more than 23.8% INACTIVE INGREDIENTS Purified water, glycerin, sorbitol, ethyl alcohol, sucrose, sodium saccharin, artificial grape flavor, FD&C Red No. 3, FD&C Blue No. 1. DESCRIPTION PHENOHYTRO ® ELIXIR Mint Flavored each 5 mL (teaspoonful) oral-administered dose of elixir contains: Phenobarbital, USP ( WARNING: may be habit forming) 16.2 mg Hyoscyamine Sulfate, USP 0.1037 mg Atropine Sulfate, USP 0.0194 mg Scopolamine Hydrobromide, USP 0.0065 mg Alcohol not more than 23.8% INACTIVE INGREDIENTS Purified water, glycerin, sorbitol, ethyl alcohol, sucrose, sodium saccharin, artificial mint flavor, FD&C Yellow No. 5, FD&C Blue No. 1. Phenobarbital is a barbiturate with the chemical name 2,4,6(1H,3H,5H) -Pyrimidinetrione, 5-ethyl-5-phenyl-. It has the following structural formula: C 12 H 12 N 2 O 3 M.W. 232.2 Hyoscyamine sulfate is a belladonna alkaloid with the chemical name Benzeneacetic acid, α-(hydroxmethyl)-, 8-methyl-8-azabicyclo[3.2.1]oct-3-yl ester, [3(S)-endo]-, sulfate (2:1), dihydrate. It has the following structural formula: (C 17 H 23 NO 3 ) 2 ∙ H 2 SO 4 ∙ 2H 2 O M.W. 712.85 Atropine sulfate is belladonna alkaloid with the chemical name: Benzeneacetic acid, α-(Hydroxymethyl)benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1]oct-3-yl ester. It has the following structural formula: (C 34 H 46 N 2 O 6 ∙ H 2 O 4 S ∙ H 2 O M.W. 694.83 Scopolamine hydrobromide is a belladonna alkaloid with the chemical name Benezeneacetic acid, α-(hydroxymethyl)-, 9-methyl-3-oxa-9-azatricyclo[3.31.0. 2,4 ]non-[7-yl ester, hydrobromide, trihydrate, [7(S)-(1 α ,2 β ,4 β ,5 α ,7 β )]-. It has the following structural formula: C 17 H 21 NO 4 ∙ BrH ∙ 3H 2 O M.W. 438.31 Chemical Structure Chemical Structure Chemical Structure Chemical Structure