sunrise pharmaceutical, inc. - Medication Listings

Naproxen delayed-release tablets are nonsteroidal anti-inflammatory drugs available as follows: Naproxen delayed-release tablets USP are available as enteric coated, white tablets containing 375 mg of naproxen or 500 mg of naproxen, USP for oral administration. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical name for naproxen, USP is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen, USP has a molecular weight of 230.26 and a molecular formula of C 14 H 14 O 3 . Naproxen has the following structural formula: Naproxen, USP is an odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen, USP at pH 7.4 is 1.6 to 1.8. The inactive ingredients are croscarmellose sodium, povidone, colloidal silicon dioxide and magnesium stearate. The enteric coating dispersion contains methacrylic acid copolymer dispersion, talc, titanium dioxide, triethyl citrate and purified water. The dissolution of this enteric-coated naproxen tablet is pH dependent with rapid dissolution above pH 6. There is no dissolution below pH 4. Chemical Structure

Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula: Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and pregelatinized starch.

Butalbital, Acetaminophen, and caffeine capsules, USP are supplied in hard-gelatin capsule form for oral administration. Each capsule contains the following active ingredients: Butalbital, USP……………………50 mg Acetaminophen, USP…………….300 mg Caffeine, USP……………………..40 mg Inactive Ingredients: FD&C blue # 1, FD&C red # 40, gelatin, microcrystalline cellulose, stearic acid, talc, titanium dioxide. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate of molecular weight 224.26. It has the following structural formula: Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic of molecular weight 151.16. It has the following structural formula: Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant of molecular weight 194.19. It has the following structural formula: 63f3897-3cb5-470e-b7ed-c3fda7f785c0 f0f4748-ad49-4c71-8213-557eb2fe15b9 52c0941-e5d7-4430-9912-909f462a63fc

Chlordiazepoxide Hydrochloride and Clidinium Bromide Capsules is a fixed-combination of chlordiazepoxide hydrochloride, a benzodiazepine, and clidinium bromide, an anticholinergic. Each Chlordiazepoxide Hydrochloride and Clidinium Bromide capsule contains the active ingredients 5 mg chlordiazepoxide hydrochloride and 2.5 mg clidinium bromide. Each capsule also contains the inactive ingredients corn starch, lactose monohydrate, talc, D&C Yellow No. 10, FD&C Green No. 3, titanium dioxide, and gelatin. Chlordiazepoxide hydrochloride is 7-chloro-2-methylamino-5-phenyl-3H-1,4-benzodiazepine 4-oxide hydrochloride. A colorless, crystalline substance, it is soluble in water. It is unstable in solution and the powder must be protected from light. The molecular weight is 336.22. The structural formula of chlordiazepoxide hydrochloride is as follows: Clidinium bromide is a synthetic anticholinergic agent which has been shown in experimental and clinical studies to have a antispasmodic and antisecretory effect on the gastrointestinal tract. Structurally clidinium bromide is: image description image description

A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. EACH TABLET CONTAINS 5 mg 7.5 mg 10 mg 12.5 mg 15 mg 20 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Aspartate Monohydrate 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Dextroamphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Total Amphetamine Base Equivalence 3.13 mg 4.7 mg 6.3 mg 7.8 mg 9.4 mg 12.6 mg 18.8 mg Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). Colors: Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 5 mg, 7.5 mg and 10 mg also contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 12.5 mg, 15 mg, 20 mg and 30 mg also contain FD&C Yellow #6 Aluminum Lake as a color additive.

Dextroamphetamine sulfate is the dextro isomer of the compound d,l -amphetamine sulfate, a sympathomimetic amine of the amphetamine group. Chemically, dextroamphetamine is d- alpha-methylphenethylamine, and is present in all forms of dextroamphetamine sulfate as the neutral sulfate. The structural formula is as follows: (C 9 H 13 N) 2 . H 2 SO 4 M.W. 368.49 Inactive Ingredients Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). The 5 mg also contains D&C yellow no. 10 aluminum lake and FD&C red no. 40 aluminum lake. The 10 mg also contains FD&C red no. 40 aluminum lake and FD&C yellow no. 6 aluminum lake. image description

Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1, 3-dihydro-1- methyl-5-phenyl-2H-1, 4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C 16 H 13 ClN 2 O and the molecular weight is 284.75. The structural formula is as follows: Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: anhydrous lactose, corn starch, pregelatinized starch and calcium stearate with the following dyes: 5-mg tablets contain D&C Yellow No. 10 Aluminum Lake; 10-mg tablets contain FD&C Blue No. 1 Aluminum Lake and D&C Yellow No. 10 Aluminum Lake. Diazepam 2 mg tablets contain no dye. diazepam-structure

Folic acid, USP, N-[p-[[(2-amino-4- hydroxy-6-pteridinyl) methyl]- amino] benzoyl]-Lglutamic acid, is a B complex vitamin containing a pteridine moiety linked by a methylene bridge to para -aminobenzoic acid, which is joined by a peptide linkage to glutamic acid. Conjugates of folic acid, USP are present in a wide variety of foods, particularly liver, kidneys, yeast, and leafy green vegetables. Commercially available folic acid, USP is prepared synthetically. Folic acid, USP occurs as a yellow or yellowish-orange crystalline powder and is very slightly soluble in water and insoluble in alcohol. Folic acid, USP is readily soluble in dilute solutions of alkali hydroxides and carbonates, and solutions of the drug may be prepared with the aid of sodium hydroxide or sodium carbonate, thereby forming the soluble sodium salt of folic acid, USP (sodium folate). Aqueous solutions of folic acid, USP are heat sensitive and rapidly decompose in the presence of light and/or riboflavin; solutions should be stored in a cool place protected from light. The structural formula of folic acid, USP is as follows: C 19 H 19 N 7 O 6 M.W. 441.40 Each tablet, for oral administration, contains 1 mg folic acid, USP. Folic acid tablets, USP 1 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, sodium starch glycolate and stearic acid.

Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p -Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C 21 H 27 CIN 2 O 2 . 2HCl M.W. 447.83 Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg, or 50 mg hydroxyzine hydrochloride, USP. lnactive ingredients include: carnauba wax, colloidal sllicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. hydroxyzinehcl-structure

Phentermine hydrochloride USP is a sympathomimetic amine anorectic. It has the chemical name of α,α,-Dimethylphenethylamine hydrochloride. The structural formula is as follows: C 10 H 15 N•HCl M.W. 185.7 Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as a capsule or tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP 37.5 mg contain the inactive ingredients Colloidal Silicon Dioxide, Corn Starch, FD&C Blue # 1, FD&C Red # 3, FD&C Yellow # 6, Gelatin, Lactose Monohydrate, Magnesium Stearate, and Titanium Dioxide. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide. Phentermine hydrochloride tablets, USP 37.5 mg contain the inactive ingredients Colloidal Silicon Dioxide, Corn Starch, FD&C Blue # 1, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose, Pregelatinized Starch (botanical source: maize), Sugar Spheres, and Stearic Acid.

Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α, dimethylphenethylamine hydrochloride. The structural formula is as follows: C 10 H 15 N•HCl M.W. 185.7 Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP is available as an oral capsule containing 15 mg or 30 mg of phentermine hydrochloride (equivalent to 12 mg or 24 mg of phentermine base). a) powder-filled capsules containing 15 mg phentermine hydrochloride (equivalent to 12 mg phentermine) or 30 mg phentermine hydrochloride (equivalent to 24 mg phentermine) and inactive ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, magnesium stearate. In addition, the 15 mg capsules contain black iron oxide, FD&C red No. 3, FD&C yellow No. 5, titanium dioxide; and the blue and clear 30 mg capsules contain D&C red No. 28, FD&C blue No. 1. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide.

Use relieves occasional constipation (irregularity) generally produces a bowel movement in 1 to 3 days

Sodium polystyrene sulfonate is a benzene, diethenyl- polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula: n The drug is a golden brown finely ground, powdered form of sodium polystyrene sulfonate, a cation-exchange resin prepared in the sodium phase with an in vitro exchange capacity of approximately 3.1 mEq ( in vivo approximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema. One gram of sodium polystyrene sulfonate contains 4.1 mEq of sodium. image description

Sulfasalazine tablets contain sulfasalazine, 500 mg, for oral administration. Therapeutic Classification: Anti-inflammatory agent. Chemical Designation: 5-([p-(2-pyridylsulfamoyl)phenyl]azo) salicylic acid. Chemical Structure: Molecular Formula : C 18 H 14 N 4 O 5 S Molecular Weight : 398.39 Inactive ingredients : Corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, talc, and purified water USP. Chemical Structure

SULFASALAZINE DELAYED RELEASE Tablets, USP formulated in a delayed release tablet (enteric-coated), 500 mg, for oral administration. SULFASALAZINE DELAYED RELEASE Tablets, USP are film coated with cellulose acetate phthalate to retard disintegration of the tablet in the stomach and reduce potential irritation of the gastric mucosa. Therapeutic Classification: Anti-inflammatory agent and/or immunomodulatory agent. Chemical Designation: 5-([p-(2-pyridylsulfamoyl)phenyl]azo) salicylic acid. Chemical Structure: Molecular Formula: C 18 H 14 N 4 O 5 S Molecular Weight : 398.39 Inactive ingredients: Carnauba wax, cellulose acetate phthalate, croscarmellose sodium, diethyl phthalate, microcrystalline cellulose, povidone, pregelatinized starch, sodium stearyl fumarate, talc and purified water USP. Chemical Structure