sportpharm, inc. dba sportpharm - Medication Listings

Methylprednisolone acetate injectable suspension, USP is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL. Each mL of these preparations contains: ## 40 mg/mL Methylprednisolone Acetate, USP 40 mg Polyethylene glycol 3350 29 mg Myristyl-gamma-picolinium chloride 0.195 mg Sodium chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51 g/mol. The structural formula is represented below: Methylprednisolone acetate injectable suspension, USP contains methylprednisolone acetate, USP which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate, USP is a white or almost white crystalline powder which melts at about 213° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. 1

Uses relieves: • heartburn • acid indigestion • sour stomach • upset stomach due to thse symptoms • pressure and bloating commonly referred to as gas • overindulgence in food and drink

Uses to “revive” someone during an overdose from many prescription pain medications or street drugs such as heroin this medicine can save a life

Neffy contains epinephrine, a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-dihydroxy-α-[(methylamino)methyl] benzyl alcohol with molecular weight of 183.21 g/mol and the following structure: Neffy (epinephrine nasal spray) is supplied as single-dose nasal sprays containing 1 mg or 2 mg of epinephrine in 0.1 mL solution for nasal administration. Inactive ingredients include benzalkonium chloride, disodium edetate, n-dodecyl beta-D-maltoside, sodium chloride, sodium metabisulfite, and hydrochloric acid or sodium hydroxide to adjust pH, in water for injection. The pH range is approximately 3 to 5.5. Chemical Structure

Nitroglycerin sublingual tablets USP, are a stabilized sublingual compressed nitroglycerin tablet that contains 0.4 mg nitroglycerin. The sublingual tablets also contain the inactive ingredients lactose monohydrate, glyceryl monostearate, pregelatinized corn starch, calcium stearate, and hydrophobic colloidal silica. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is: Molecular weight: 227.09 STRUCTURE

NURTEC ODT contains rimegepant sulfate, a calcitonin gene-related peptide receptor antagonist. Rimegepant sulfate is described chemically as (5S,6S,9R)-5-amino-6-(2,3-difluorophenyl)-6,7,8,9-tetrahydro-5H-cyclohepta[b]pyridin-9-yl 4-(2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-1-yl)-1-piperidinecarboxylate hemisulfate sesquihydrate and its structural formula is: Its empirical formula is C 28 H 28 F 2 N 6 O 3 0.5 H 2 SO 4 1.5 H 2 O, representing a molecular weight of 610.63. Rimegepant free base has a molecular weight of 534.56. Rimegepant sulfate is a white to off-white, crystalline solid that is slightly soluble in water. NURTEC ODT (orally disintegrating tablets) is for sublingual or oral use and contains 85.7 mg rimegepant sulfate, equivalent to 75 mg rimegepant free base, and the following inactive ingredients: benzyl alcohol, eucalyptol, gelatin, limonene, mannitol, menthol, menthone, menthyl acetate, sucralose, and vanillin. Chemical Structure

Uses temporarily relieves itchy and red eyes due to pollen, ragweed, grass, animal hair and dander

The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O representing a molecular weight of 293.4 g/mol. Ondansetron is a white to off-white powder. Each 8 mg ondansetron orally disintegrating tablet, USP for oral administration contains 8 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2. Chemical Structure

The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 8 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow. Meets USP dissolution test 6. Chemical Structure

Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI), is available as: • Capsules containing 30 mg, 45 mg, or 75 mg of oseltamivir for oral use, in the form of oseltamivir phosphate In addition to the active ingredient, each capsule contains croscarmellose sodium, povidone, pregelatinized starch, sodium stearyl fumarate and talc. The 30 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide and red iron oxide. The 45 mg capsule shell contains gelatin, titanium dioxide and black iron oxide. The 75 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, black iron oxide and red iron oxide. Each capsule is printed with blue ink, which includes shellac, propylene glycol, strong ammonia solution and FD&C Blue No. 2 as the colorant. The botanical source for pregelatinized starch is maize starch. Oseltamivir phosphate USP is a white to off-white powder with the chemical name [3R-(3α,4β,5α)]-Ethyl 4-(acetyl amino)-5-amino-3-(1-ethylpropoxy)-1-cyclohexene-1-carboxylate phosphate (1:1). The molecular formula is C 16 H 28 N 2 O 4 .H 3 PO 4 . The relative molecular mass is 410.40 for oseltamivir phosphate salt. The structural formula is as follows: Oseltamivirphosphatestructure

Prednisolone acetate ophthalmic suspension, USP 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-diene-3, 20-dione 21-acetate and it has the following structure: Structural Formula: prednisolone acetate Each mL of Prednisolone acetate ophthalmic suspension 1% contains: Active : prednisolone acetate (microfine suspension) 1% Inactives : benzalkonium chloride as preservative; boric acid; edetate disodium; hypromellose; polysorbate 80; purified water; sodium bisulfite; sodium chloride; and sodium citrate. The pH during its shelf life ranges from 5.0 - 6.0. The following structure for Prednisolone acetate ophthalmic suspension, USP 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-

Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17 H 20 N 2 S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H -Phenothiazine-10-ethanamine, N , N ,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate. Structured product formula for Promethazine

Proparacaine hydrochloride ophthalmic solution 0.5% is a topical local anesthetic for ophthalmic use. The active ingredient is represented by the structural formula: Established name: Proparacaine Hydrochloride Chemical name: Benzoic acid, 3-amino-4-propoxy-,2-(diethylamino) ethyl ester, monohydrochloride. Molecular Weight: 330.85 Each mL contains: Active: proparacaine hydrochloride 5mg 0.5%. Preservative: benzalkonium chloride (0.01%). Inactives: glycerin; and purified water. The pH may be adjusted with hydrochloric acid and/or sodium hydroxide. chemical

Proparacaine hydrochloride ophthalmic solution USP, 0.5% is a local anesthetic for ophthalmic instillation. Each mL of sterile, aqueous solution contains: Active: Proparacaine Hydrochloride 5 mg (0.5%). Preservative: Benzalkonium Chloride 0.1 mg (0.01%). Inactives: Glycerin as a stabilizer, Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH, and Water for Injection USP. Proparacaine hydrochloride is designated chemically as 2-(Diethylamino) ethyl 3-amino-4- propoxybenzoate monohydrochloride. C 16 H 26 N 2 O 3 •HCl MW 330.85 CAS-5875-06-9 Image

Proparacaine hydrochloride ophthalmic solution USP, 0.5% is a topical local anesthetic for ophthalmic use. The active ingredient is represented by the structural formula: Established name: Proparacaine Hydrochloride Chemical name: Benzoic acid, 3-amino-4-propoxy-,2-(diethylamino) ethyl ester, monohydrochloride Molecular weight: 330.86 Each mL contains: Active: proparacaine hydrochloride 5 mg (0.5%). Inactives: glycerin and purified water. The pH may be adjusted with hydrochloric acid and/or sodium hydroxide. Preservative: benzalkonium chloride (0.01%). chemical structure

Uses temporarily relieves sinus congestion and pressure temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies

Uses temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies temporarily relieves sinus congestion and pressure

Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula: C 17 H 26 N 2 O•HCl•H 2 O M.W. 328.89 At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n -octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 5 mg ropivacaine hydrochloride anhydrous and 8.0 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0 with. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C. Image

Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as S-(-)-1-propyl-2’,6’-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula: ' C 17 H 26 N 2 O•HCl•H 2 O M.W. 328.89 At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n -octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 5.0 mg of ropivacaine hydrochloride anhydrous), and 8.0 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C. chemical-structure

Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.0 (4.5 to 7.0). Composition, osmolarity, and ionic concentration are shown below: 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2- ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole­-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate. Chemical Structure

Tropicamide Ophthalmic Solution, USP is an anticholinergic prepared as a sterile topical ophthalmic solution. The active ingredient is represented by the chemical structure: Established name: Tropicamide ophthalmic solution, USP Chemical name: Benzeneacetamide, N -ethyl-α-(hydroxymethyl)- N -(4-pyridinylmethyl). Each mL contains: Active: tropicamide 1%. Preservative: benzalkonium chloride 0.01%. Inactives: sodium chloride, edetate disodium, hydrochloric acid and/or sodium hydroxide (to adjust pH), Water for injection. pH range 4.0 - 5.8. Image

Valacyclovir hydrochloride is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg of valacyclovir, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C 13 H 20 N 6 O 4 •HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk a s for valacyclovir hydrochloride are 1.90, 7.47, and 9.43. Chemical Structure

Baloxavir marboxil is an influenza virus PA endonuclease inhibitor. The active component of XOFLUZA is baloxavir marboxil. The chemical name of baloxavir marboxil is ({(12aR)-12-[(11S)-7,8-Difluoro-6,11-dihydrodibenzo[b,e]thiepin-11-yl]-6,8-dioxo-3,4,6,8,12,12a-hexahydro-1H-[1,4]oxazino[3,4-c]pyrido[2,1-f][1,2,4]triazin-7-yl}oxy)methyl methyl carbonate. The empirical formula of baloxavir marboxil is C 27 H 23 F 2 N 3 O 7 S, and the chemical structure is shown below. Baloxavir marboxil has a molecular mass of 571.55 grams per mole and a partition coefficient (log P) of 2.26. It is freely soluble in dimethylsulfoxide, soluble in acetonitrile, slightly soluble in methanol and ethanol, and practically insoluble in water. XOFLUZA is supplied as tablets. XOFLUZA tablets are white to light yellow, film-coated for oral administration . The 80 mg film-coated tablet contains 80 mg of baloxavir marboxil. The inactive ingredients of XOFLUZA tablets are: croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, povidone K25, sodium stearyl fumarate, talc, and titanium dioxide. Chemical Structure