solco healthcare us, llc. - Medication Listings

The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5-dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its empirical formula is C 17 H 14 Cl 2 F 2 N 2 O 3 and the molecular weight is 403.22. The chemical structure is: The drug substance is a white to off-white non-hygroscopic powder with a melting point of 160 o C. It is practically insoluble in water and hexane, sparingly soluble in ethanol, and freely soluble in acetone. Roflumilast tablets are supplied as white to off-white, round tablets, debossed with “S” on one side and “500” on the other side. Each tablet contains 500 mcg of roflumilast. Each roflumilast tablet for oral administration contains the following inactive ingredients: lactose monohydrate, corn starch, copovidone, hydroxypropyl cellulose, and sodium stearyl fumarate. 1

Ropinirole extended-release tablets contain ropinirole, a non-ergoline dopamine agonist as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C 16 H 24 N 2 O•HCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is: Ropinirole hydrochloride, USP is a white to yellow solid with a melting range of 243°C to 250°C and a solubility of 133 mg/mL in water. Ropinirole extended-release tablets are formulated as a 2-layered tablet with an active-containing, slow-release layer, and 1 placebo layer acting as a barrier layer which controls the surface area available for drug release. Each biconvex, round tablet contains 2.28, 4.56, 6.84, 9.12, or 13.68 mg ropinirole hydrochloride, USP, equivalent to ropinirole 2, 4, 6, 8, or 12 mg, respectively. Inactive ingredients of the core tablets consist of carboxymethylcellulose sodium, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, yellow ferric oxide. Inactive ingredients of the film coats are slightly different among the 5 strengths of tablets and are tabulated below: Strength Inactive ingredients of the film coat 2 mg D&C red #27 aluminum lake, FD&C blue #1 aluminum lake, polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, talc and titanium dioxide 4 mg D&C yellow #10 aluminum lake, polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, red ferric oxide, talc and titanium dioxide 6 mg polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, talc and titanium dioxide 8 mg polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, red ferric oxide, talc and titanium dioxide 12 mg FD&C blue #2 aluminum lake, polyethylene glycol, polyvinyl alcohol-partially hydrolyzed, talc, titanium dioxide and yellow ferric oxide USP dissolution test is pending. 0925224a-figure-01

Ropinirole tablets contain ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C 16 H 24 N 2 O•HCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is: Ropinirole hydrochloride, USP is a white to yellow solid with a melting range of 243 o C to 250°C and a solubility of 133 mg/mL in water. Each round biconvex film-coated ropinirole tablet contains 0.29, 0.57, 1.14, 2.28, 3.42, 4.56, or 5.70 mg of ropinirole hydrochloride equivalent to ropinirole 0.25, 0.5, 1, 2, 3, 4, or 5 mg, respectively. Inactive ingredients of the core tablets consist of croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. Inactive ingredients of the film coats are slightly different among the 7 strengths of tablets and are tabulated below: Strength Inactive ingredients of the film coat 0.25 mg lecithin (soya), polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 0.5 mg iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 1 mg FD&C Blue No. 2 aluminum lake, iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 2 mg lecithin (soya), iron oxide red, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 3 mg carmine, FD&C Blue No. 1 aluminum lake, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 4 mg iron oxide red, iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 5 mg FD&C Blue No. 2 aluminum lake, lecithin (soya), polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP. structural formula

Ropinirole tablets contain ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C 16 H 24 N 2 O•HCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is: Ropinirole hydrochloride, USP is a white to yellow solid with a melting range of 243 o C to 250°C and a solubility of 133 mg/mL in water. Each round biconvex film-coated ropinirole tablet contains 0.29, 0.57, 1.14, 2.28, 3.42, 4.56, or 5.70 mg of ropinirole hydrochloride equivalent to ropinirole 0.25, 0.5, 1, 2, 3, 4, or 5 mg, respectively. Inactive ingredients of the core tablets consist of croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose. Inactive ingredients of the film coats are slightly different among the 7 strengths of tablets and are tabulated below: Strength Inactive ingredients of the film coat 0.25 mg lecithin (soya), polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 0.5 mg iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 1 mg FD&C Blue No. 2 aluminum lake, iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 2 mg lecithin (soya), iron oxide red, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 3 mg carmine, FD&C Blue No. 1 aluminum lake, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 4 mg iron oxide red, iron oxide yellow, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. 5 mg FD&C Blue No. 2 aluminum lake, lecithin (soya), polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, talc and titanium dioxide. FDA approved dissolution test specifications differ from USP. structural formula

Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22 H 19 N 3 O 4 representing a molecular weight of 389.41. The structural formula is: The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP are available as almond-shaped tablets for oral administration. Each tablet contains 2.5, 5, 10, or 20 mg of tadalafil, USP and the following inactive ingredients: croscarmellose sodium, ferrosoferric oxide, hydroxypropyl cellulose, iron oxide red, iron oxide yellow, lactose monohydrate, lecithin (soya), macrogol/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-partially hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. f35596a7-figure-01

Tadalafil, an oral treatment for pulmonary arterial hypertension, is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22 H 19 N 3 O 4 representing a molecular weight of 389.41. The structural formula is: The chemical designation is pyrazino[1´,2´:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP are available as orange, film-coated, almond-shaped tablets for oral administration. Each tablet contains 20 mg of tadalafil, USP and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, iron oxide yellow, iron oxide red, ferrosoferric oxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, polyvinyl alcohol-partially hydrolyzed, macrogol/PEG 3350 and lecithin (soya). ab0f57c0-figure-01

Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22 H 19 N 3 O 4 representing a molecular weight of 389.41. The structural formula is: The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP are available as almond-shaped tablets for oral administration. Each tablet contains 2.5, 5, 10, or 20 mg of tadalafil, USP and the following inactive ingredients: croscarmellose sodium, ferrosoferric oxide, hydroxypropyl cellulose, iron oxide red, iron oxide yellow, lactose monohydrate, lecithin (soya), macrogol/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-partially hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. f35596a7-figure-01

Telmisartan is a non-peptide angiotensin II receptor (type AT 1 ) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C 33 H 30 N 4 O 2 , its molecular weight is 514.63, and its structural formula is: Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture. Structure

Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro-1, 3-dihydro-3-hydroxy-1-methyl-5-phenyl-2 H -1,4-benzodiazepin-2-one, and the structural formula is: C 16 H 13 ClN 2 O 2 MW = 300.74 Temazepam is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol USP. Temazepam capsules USP, 7.5 mg, 15 mg, 22.5 mg, and 30 mg, are for oral administration. 7.5 mg, 15 mg, 22.5 mg, and 30 mg Capsules Active Ingredient : temazepam, USP Each capsule contains the following inactive ingredients: colloidal silicon dioxide, edetate disodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. The capsule shells for all strengths contain FD&C Blue #1, FD&C Red #40, gelatin and titanium dioxide. The imprinting ink may contain ammonium solution, butyl alcohol, black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, potassium hydroxide, propylene glycol and shellac. TEMAZEPAM

Ticagrelor tablets contain ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y 12 ADP-receptor. Chemically it is (1 S ,2 S ,3 R ,5 S )-3-[7-{[(1 R ,2 S )-2-(3,4-difluorophenyl)cyclopropyl]amino}-5- (propylthio)-3 H -[1,2,3]-triazolo[4,5- d ]pyrimidin-3-yl]-5-(2-hydroxyethoxy) cyclopentane-1,2-diol. The empirical formula of ticagrelor is C 23 H 28 F 2 N 6 O 4 S and its molecular weight is 522.57. The chemical structure of ticagrelor is: Ticagrelor is a crystalline powder with an aqueous solubility of approximately 10 μg/mL at room temperature. Ticagrelor tablets 90 mg tablets for oral administration contain 90 mg of ticagrelor and the following ingredients: dibasic calcium phosphate dihydrate, ferric oxide yellow, hypromellose, mannitol, magnesium stearate, polyethylene glycol 400, sodium starch glycolate, and titanium dioxide. C:\Users\RA\Desktop\Untitled.jpg

Tranylcypromine sulfate, the active ingredient of Tranylcypromine Tablets, USP, is a non-hydrazine MAOI. The chemical name is (±)- trans -2-phenylcyclopropylamine sulfate (2:1). The molecular formula is (C 9 H 11 N) 2 ∙H 2 SO 4 and its molecular weight is 364.46. The structural formula is: Tranylcypromine film-coated tablets are intended for oral administration. Each round, red tablet is debossed on one side with "10" and plain on the other side, and contains tranylcypromine sulfate equivalent to 10 mg of tranylcypromine. Inactive ingredients consist of microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol, polyethylene glycol, talc, FD&C Red No. 40-Aluminum Lake, titanium dioxide, and carmine. Chemical Structure

Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1 receptor subtype. Valsartan is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, iron oxides yellow, iron oxides red (only 80 mg and 320 mg), macrogol/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. C:\Users\RA\Desktop\Untitled.jpg

Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2'-(1 H -tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake. C:\Users\RA\Desktop\5.jpg C:\Users\RA\Desktop\6.jpg

Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is: Voriconazole, USP is designated chemically as (2R,3S)-2-(2,4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C 16 H 14 F 3 N 5 O and a molecular weight of 349.3. Voriconazole drug substance is a white to off-white powder. Voriconazole tablets contain 50 mg or 200 mg of voriconazole, USP. The inactive ingredients include croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch (corn), and a coating containing macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. image description