samson medical technologies, l.l.c. - Medication Listings

Cefazolin for Injection USP, Pharmacy Bulk Package bag SmartPak ® should not be used in patients who require less than a 250 mg dose of cefazolin. Cefazolin for Injection, USP, is a sterile, lyophilized, semisynthetic cephalosporin for intravenous administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7- [2-(1 H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Each Pharmacy Bulk Package contains 48 mg (2.1 mEq) of sodium per 1 gram of cefazolin sodium. Cefazolin for Injection, USP, is supplied in 100 grams and 300 grams SmartPak ® Pharmacy Bulk Packages bags equivalent. Each SmartPak ® Pharmacy Bulk Package bag contains cefazolin sodium equivalent to 100 grams or 300 grams of cefazolin. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. A Pharmacy Bulk Package is a container of a sterile preparation for intravenous use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. The molecular formula is C 14 H 13 N 8 NaO 4 S 3 . The molecular weight is 476.49. The structural formula is as follows: The pH of the reconstituted solution is between 4 and 6. Structural Formula

Cefepime for Injection, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than a 500 mg dose of cefepime. Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 7 2 -( Z) -( O -methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula: BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES CONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C 19 H 24 N 6 O 5 S 2 ) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied in a SmartPak ® pharmacy bulk package containing the equivalent of 100 grams of cefepime. Cefepime for Injection is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection will range in color from pale yellow to amber. Each SmartPak ® Pharmacy Bulk Package contains sterile Cefepime Hydrochloride, USP, equivalent to 100 grams of cefepime and is intended for intravenous infusion only. Its L-arginine content is approximately 70.7 grams. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. CONSTITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION.

Cefoxitin for Injection, USP, Pharmacy Bulk Package bag SmartPak® should be used only in patients who require a 1 gram dose and not any fraction thereof. Cefoxitin for Injection USP, Pharmacy Bulk Package bag SmartPak® should not be used in patients who require less than the 1 gram dose of cefoxitin. Cefoxitin for Injection, USP is a semi-synthetic, broad-spectrum cepha antibiotic for intravenous administration. It is derived from cephamycin C, which is produced by Streptomyces lactamdurans . Its chemical name is sodium ( 6R,7S )-3-(hydroxymethyl)-7-methoxy-8-oxo-7-[2-(2-thienyl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate carbamate (ester). The empirical formula is C 16 H 16 N 3 NaO 7 S 2 , and the structural formula is: Cefoxitin for Injection contains approximately 53.8 mg (2.3 mEq) of sodium per gram of cefoxitin. Solutions of Cefoxitin for Injection, USP range from colorless to light amber in color. The pH of freshly constituted solutions usually ranges from 4.2 to 7.0. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 50 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. Each SmartPak ® Pharmacy Bulk Package contains sterile Cefoxitin Sodium, USP equivalent to 100 grams of cefoxitin and is intended for intravenous infusion only. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED BEFORE USE. RECONSITITUTED BULK SOLUTION SHOULD NOT BE USED FOR DIRECT INFUSION. CEFOXITIN FOR INJECTION, USP SMARTPAK ® PHARMACY BULK PACKAGE SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE OF CEFOXTIN. image description

Ceftriaxone for Injection, USP, Pharmacy Bulk Package bag SmartPak ® should be used only in patients who require a 1 gram dose and not any fraction thereof. Ceftriaxone for Injection USP, Pharmacy Bulk Package bag SmartPak ® should not be used in patients who require less than the 1 gram dose of ceftriaxone. Ceftriaxone for Injection, USP, is a sterile, semisynthetic, broad-spectrum cephalosporin antibacterial for intravenous administration. Ceftriaxone sodium is (6 R ,7 R )-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- as -triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2 -( Z )-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18 H 16 N 8 Na 2 O 7 S 3 •3.5H 2 O. It has a calculated molecular weight of 661.60 and the following structural formula: Ceftriaxone sodium is a white to yellowish-orange crystalline powder, which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The p H of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage and concentration. Each Pharmacy Bulk Package contains approximately 83 mg (3.6 mEq) of sodium per 1 gram of ceftriaxone activity. Ceftriaxone for Injection, USP is supplied in 100 grams SmartPak ® Pharmacy Bulk Packages bags equivalent. Each SmartPak ® Pharmacy Bulk Package bag contains ceftriaxone sodium, USP equivalent to 100 grams of ceftriaxone. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 mg per mL AND FURTHER DILUTION IN 50 mL OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY OVER 30 MINUTES. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC PATIENTS AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 1 GRAM DOSE. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion. chemical structure

Vancomycin Hydrochloride for Injection USP, Pharmacy Bulk Package bag SmartPak ® should not be used in patients who require less than a 500 mg dose of vancomycin. Vancomycin Hydrochloride for Injection, USP is a white to almost white to brownish lyophilized powder for preparing intravenous (I.V.) infusions, in bags containing the equivalent of 100 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 100 mg/mL, a clear, brownish-yellow solution is formed with the pH of the solution between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION ). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Each SmartPak ® Pharmacy Bulk Package contains Vancomycin Hydrochloride for Injection, USP equivalent to 100 grams of vancomycin activity and is intended for intravenous infusion only following further dilution. A Pharmacy Bulk Package is a sterile dosage form containing many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. VANCOMYCIN HYDROCHLORIDE FOR INJECTION PHARMACY BULK PACKAGE BAG SMARTPAK ® SHOULD NOT BE USED IN PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE OF VANCOMYCIN. BEFORE ADMINISTRATION, THIS PHARMACY BULK PACKAGE REQUIRES RECONSTITUTION USING STERILE WATER FOR INJECTION, USP TO A CONCENTRATION OF 100 MG PER ML AND FURTHER DILUTION IN 100 ML OF A COMPATIBLE SOLUTION AND INFUSED INTRAVENOUSLY. THIS PRODUCT IS NOT INTENDED TO BE USED IN PEDIATRIC AND RENALLY IMPAIRED PATIENTS WHO REQUIRE LESS THAN A 500 MG DOSE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis ). The chemical name for vancomycin hydrochloride is [3S- [3 R *,6 S *( S *),7 S *,22 S *,23 R *,26 R *,36 S *,38a S *]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H -8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H ,16 H -[1,6,9]oxadiazacyclohexadecino[4,5- m ][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66 H 75 Cl 2 N 9 O 24 • HCl and the molecular weight is 1,485.74. Vancomycin Hydrochloride has the following structural formula: image description