sagent pharmaceuticals - Medication Listings

Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 , a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula: Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder consisting of the active ingredient, levothyroxine sodium, and the excipients dibasic sodium phosphate heptahydrate; mannitol; and sodium hydroxide, in single-dose amber glass vials. Levothyroxine Sodium for Injection is available at three dosage strengths: 100 mcg per vial, 200 mcg per vial, and 500 mcg per vial. Figure

Lincomycin Injection, USP is a sterile solution containing lincomycin hydrochloride which is the monohydrated salt of lincomycin, a lincosamide antibacterial produced by the growth of a member of the lincolnensis group of Streptomyces lincolnensis (Fam. Streptomycetaceae ). The chemical name for lincomycin hydrochloride is Methyl 6,8-dideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrolidinecarboxamido)-1-thio-D-erythro-α-D-galacto-octopyranoside monohydrochloride monohydrate. The molecular formula of lincomycin hydrochloride is C 18 H 34 N 2 O 6 S.HCl.H 2 O and the molecular weight is 461.01. The structural formula is represented below: Lincomycin hydrochloride is a white or practically white, crystalline powder and is odorless or has a faint odor. Its solutions are acid and are dextrorotatory. Lincomycin hydrochloride is freely soluble in water; soluble in dimethylformamide and very slightly soluble in acetone. Lincomycin Injection, USP contains lincomycin hydrochloride in a sterile, clear, colorless solution with benzyl alcohol used as a preservative 9.45 mg per mL, and water for injection. Lincomycin Injection, USP is a sterile solution for intramuscular and intravenous use. Lincomycin Injection, USP is supplied in 2 mL and 10 mL multiple-dose vials containing 300 mg per mL of lincomycin (equivalent to 340 mg per mL of lincomycin hydrochloride, USP). Figure

Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% concentration. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate heptahydrate, USP is chemically designated MgSO 4 • 7H 2 O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polypropylene. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]- L -phenylalanine. The molecular formula is C 13 H 18 Cl 2 N 2 O 2 and the molecular weight is 305.20. The structural formula is: Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa 1 of ∼2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, white to off white lyophilized cake or powder. Each single-use vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 grams, propylene glycol 6 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously. Structural Formula

Meropenem for Injection, USP (meropenem for injection) is a sterile, pyrogen-free, synthetic, carbapenem antibacterial for intravenous administration. It is (4R,5S,6S)-3- [[(3S,5S)-5-(Dimethylcarbamoyl)-3-pyrrolidinyl]thio]-6- [(1R)-1-hydroxyethyl]-4- methyl-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid trihydrate. Its empirical formula is C 17 H 25 N 3 O 5 S•3H 2 O with a molecular weight of 437.52. Its structural formula is: Meropenem for Injection, USP is a white to pale yellow crystalline powder. The solution varies from colorless to yellow depending on the concentration. The pH of freshly constituted solutions is between 7.3 and 8.3. Meropenem is soluble in 5% monobasic potassium phosphate solution, sparingly soluble in water, very slightly soluble in hydrated ethanol, and practically insoluble in acetone or ether. When re-constituted as instructed, each 1 gram Meropenem for Injection, USP vial will deliver 1 gram of meropenem and 90.2 mg of sodium as sodium carbonate (3.92 mEq). Each 500 mg Meropenem for Injection, USP vial will deliver 500 mg meropenem and 45.1 mg of sodium as sodium carbonate (1.96 mEq) [see Dosage and Administration ( 2.4 )] . Structural Formula

Mesna is a sterile, nonpyrogenic, aqueous detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C 2 H 5 NaO 3 S 2 and a molecular weight of 164.18. Its structural formula is as follows: Mesna Injection is a sterile, nonpyrogenic, aqueous solution of colorless to light pink appearance in clear glass multidose vials for intravenous administration. Mesna Injection contains 100 mg per mL mesna, 0.25 mg per mL edetate disodium, sodium hydroxide for pH adjustment and qs with Water for Injection. Mesna Injection multidose vials also contain 10.4 mg per mL of benzyl alcohol as a preservative. The solution has a pH range of 6.5 to 7.4. Structural Formula

Methocarbamol Injection, USP, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. It is a sterile, pyrogen-free solution intended for intramuscular or intravenous administration. Each mL contains: methocarbamol, USP 100 mg, polyethylene glycol 300, NF 0.5 mL, Water for Injection, USP q.s. The pH is adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1,2-propanediol 1-carbamate and has the empirical formula of C 11 H 15 NO 5 . Its molecular weight is 241.24. The structural formula is shown below: Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n -hexane. Methocarbamol Injection, USP has a pH between 3.5 and 6.0. AFTER MIXING WITH INTRAVENOUS INFUSION FLUIDS, DO NOT REFRIGERATE. Structural Formula

Methocarbamol Injection, USP a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. It is a sterile, pyrogen-free solution intended for intramuscular or intravenous administration. Each mL contains: methocarbamol, USP 100 mg, polyethylene glycol 300, NF 0.5 mL, Water for Injection, USP q.s. The pH is adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1,2-propanediol 1-carbamate and has the empirical formula of C 11 H 15 NO 5 . Its molecular weight is 241.24. The structural formula is shown below: Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n -hexane. Methocarbamol Injection, USP has a pH between 3.5 and 6.0. AFTER MIXING WITH INTRAVENOUS INFUSION FLUIDS, DO NOT REFRIGERATE . Structural Formula

Methylprednisolone Acetate Injectable Suspension, USP is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in two strengths: 40 mg per mL, 80 mg per mL. Each mL of these preparations contains: Methylprednisolone acetate……………………………………40 mg……………………..80 mg Polyethylene glycol 3350……………………………………29.1 mg……………………28.2 mg Polysorbate 80.………………………………………………1.94 mg……………………1.88 mg Monobasic sodium phosphate…………………………………6.8 mg……………………6.59 mg Dibasic sodium phosphate, USP……………………………..1.42 mg…………………….1.37 mg Benzyl alcohol added as a preservative………………………9.16 mg……………………8.88 mg Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11ß)- and the molecular weight is 416.51. The structural formula is represented below: Methylprednisolone Acetate Injectable Suspension, USP, sterile aqueous suspension, contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. Structural Formula

Metoprolol tartrate USP, is a selective beta 1 -adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, and its structural formula is: Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. structural formula

Metronidazole Injection, USP is a sterile, parenteral dosage form of metronidazole in water. Each 100 mL of Metronidazole Injection, USP contains a sterile, nonpyrogenic, isotonic, buffered solution of Metronidazole, USP 500 mg, Sodium Chloride, USP 740 mg, Dibasic Sodium Phosphate Dihydrate, USP 75 mg and Citric Acid Anhydrous, USP 40 mg in Water for Injection, USP. Metronidazole Injection, USP has a calculated osmolality from 270 to 310 mOsmol/kg and a pH from 4.5 to 6.0. Sodium content: 13.5 mEq/container. Metronidazole is classified as a nitroimidazole antimicrobial and is administered by the intravenous route. Metronidazole, USP is chemically designated 2-methyl-5-nitroimidazole-1-ethanol (C 6 H 9 N 3 O 3 ): Not made with natural rubber latex. The flexible container is fabricated from a specially formulated non-plasticized, thermoplastic copolyolephine. The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Figure

Micafungin for injection, USP is a sterile, lyophilized product for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium), 200 mg lactose, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration ( 2 )] . Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5 to 7. Micafungin sodium is chemically designated as: Pneumocandin A0,1-[(4 R ,5 R )-4,5-dihydroxy- N 2 -[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4 S )-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium is: The empirical/molecular formula is C 56 H 70 N 9 NaO 23 S and the formula weight is 1292.26. Micafungin sodium is a light-sensitive, hygroscopic white powder that is freely soluble in water, isotonic sodium chloride solution, N,N-dimethylformamide and dimethylsulfoxide, slightly soluble in methyl alcohol, and practically insoluble in acetonitrile, ethyl alcohol (95%), acetone, diethyl ether and n-hexane. Chemical Structure of Micafungin Sodium

Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ , is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 H -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C 18 H 13 ClFN 3 •HCl, a calculated molecular weight of 362.25 and the following structural formula: Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg per mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form. Structural Formula Figure Figure

Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ , is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 H -imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C 18 H 13 ClFN 3 •HCl, a calculated molecular weight of 362.25 and the following structural formula: Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 3.6 for the 5 mg per mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form. Structural Formula Figure Figure

Midazolam in 0.9% Sodium Chloride Injection is a benzodiazepine available as a sterile, preservative-free, nonpyrogenic solution of midazolam and sodium chloride in water for injection for intravenous use. Each single-dose bag of Midazolam in 0.9% Sodium Chloride Injection contains either 50 mg per 50 mL (1 mg per mL) or 100 mg per 100 mL (1 mg per mL) of midazolam and 9 mg/mL of sodium chloride in water for injection. Midazolam in 0.9% Sodium Chloride Injection may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. The pH is approximately 2.5 to 3.5. Midazolam is a white or yellowish powder, practically insoluble in water, Chemically, midazolam is 8-chloro-6-(2-fluorophenyl)-1-methyl-4 H -imidazo[1,5-a][1,4]-benzodiazepine. Midazolam has the empirical formula C 18 H 13 ClFN 3 , a calculated molecular weight of 325.8 and the following structural formula: Structural Formula

Milrinone lactate is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure: Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C 12 H 9 N 3 O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 to 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution. Structural Formula

Mitomycin (also known as mitomycin and/or mitomycin-C) is an antibiotic isolated from the broth of Streptomyces caespitosus which has been shown to have antitumor activity. The compound is heat stable, has a high melting point, and is freely soluble in organic solvents. Mitomycin for Injection, USP is a sterile dry mixture of mitomycin and mannitol, which when reconstituted with Sterile Water for Injection provides a solution for intravenous administration. Each Single-Dose vial contains mitomycin 40 mg and mannitol 80 mg. Each mL of reconstituted solution will contain 0.5 mg mitomycin and have a pH between 6.0 and 8.0. Mitomycin is a blue-violet crystalline powder with the molecular formula of C 15 H 18 N 4 O 5 , and a molecular weight of 334.33. Its chemical name is 7-amino-9α-methoxymitosane and it has the following structural formula; Structural Formula

Mitomycin (also known as mitomycin and/or mitomycin-C) is an antibiotic isolated from the broth of Streptomyces caespitosus which has been shown to have antitumor activity. The compound is heat stable, has a high melting point, and is freely soluble in organic solvents. Mitomycin for Injection, USP is a sterile dry mixture of mitomycin and mannitol, which when reconstituted with Sterile Water for Injection provides a solution for intravenous administration. Each Single-Dose vial contains either mitomycin 5 mg and mannitol 10 mg or mitomycin 20 mg and mannitol 40 mg. Each mL of reconstituted solution will contain 0.5 mg mitomycin and have a pH between 6.0 and 8.0. Mitomycin is a blue-violet crystalline powder with the molecular formula of C 15 H 18 N 4 O 5 , and a molecular weight of 334.33. Its chemical name is 7-amino-9α-methoxymitosane and it has the following structural formula; Figure

Nafcillin for Injection, USP is a semisynthetic antibiotic penicillin derived from the penicillin nucleus 6-aminopenicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name is 4-Thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, 6-[[(2-ethoxy-1-naphthalenyl)carbonyl]amino]-3,3-dimethyl-7-oxo-monosodium salt, monohydrate [2 S (2α,5α,6β)]. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows: C 21 H 21 N 2 NaO 5 S·H 2 O M.W. 454.47 Each Nafcillin for Injection, USP Pharmacy Bulk Package is supplied as a dry powder in bottles containing nafcillin sodium and is intended for intravenous use only. It is soluble in water. The pH of the aqueous solution is 6.0 to 8.5. Each Pharmacy Bulk Package bottle contains nafcillin sodium, as the monohydrate equivalent to 10 grams of nafcillin. The sodium content is 65.8 mg [2.9 mEq] per gram of nafcillin. The product is buffered with 40 mg sodium citrate per gram. A Pharmacy Bulk Package is a container of sterile dosage form which contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. FURTHER DILUTION IS REQUIRED AFTER RECONSTITUTION (see DOSAGE AND ADMINISTRATION , and DIRECTIONS FOR PROPER USE OF PHARMACY BULK PACKAGE ). NOT TO BE DISPENSED AS A UNIT. Structural Formula of Nafcillin Sodium

Nelarabine is a prodrug of the cytotoxic deoxyguanosine analogue, 9-β- D -arabinofuranosylguanine (ara-G). The chemical name for nelarabine is 2-amino-9-β- D -arabinofuranosyl-6-methoxy-9 H -purine. It has the molecular formula C 11 H 15 N 5 O 5 and a molecular weight of 297.27. Nelarabine has the following structural formula: Nelarabine is slightly soluble to soluble in water and melts with decomposition between 209°C and 217°C. Nelarabine injection is supplied as a clear, colorless, sterile solution in glass single-dose vials. Each vial contains 250 mg of nelarabine (5 mg nelarabine per mL) and the inactive ingredient sodium chloride (4.5 mg per mL) in 50 mL Water for Injection, USP. Nelarabine is intended for intravenous infusion. Hydrochloric acid and sodium hydroxide may have been used to adjust the pH. The solution pH ranges from 5.0 to 7.0. Structural Formula

Neostigmine methylsulfate, USP, a cholinesterase inhibitor, is ( m -hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is: Neostigmine methylsulfate, USP is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg per mL strength contains neostigmine methylsulfate, USP 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg per mL strength contains neostigmine methylsulfate, USP 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Structural Formula

Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg per mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride in water for injection with 48 mg sorbitol. Buffered with 0.525 mg citric acid monohydrate and 0.09 mg sodium hydroxide. Additional citric acid and/or sodium hydroxide may have been added to adjust pH. Chemical Structure

Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula: Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas. Structural Formula

Octreotide Acetate Injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered acetate solution with a pH range 3.9 to 4.5 for administration by deep subcutaneous (intrafat) or intravenous (IV) injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-,cyclic (2 → 7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Octreotide Acetate Injection is available as sterile 1 mL single-dose vials in 3 strengths, containing 50 mcg, 100 mcg, or 500 mcg octreotide acetate, USP. Each mL of the single-dose vial also contains sodium chloride, USP (7 mg), glacial acetic acid, USP (2 mg), sodium acetate trihydrate, USP (2 mg), and water for injection, USP (quantity sufficient to 1 mL). Octreotide Acetate Injection is also available as sterile 5 mL multi-dose vials in 2 strengths, containing 200 mcg, or 1,000 mcg per mL of octreotide acetate, USP. Each mL of the multi-dose vial also contains sodium chloride, USP (7 mg), glacial acetic acid, USP (2 mg), sodium acetate trihydrate, USP (2 mg), phenol, USP (5 mg), and water for injection, USP (quantity sufficient to 1 mL). The molecular weight of octreotide acetate is 1,019.3 g/mol (free peptide, C 49 H 66 N 10 O 10 S 2 ) and its amino acid sequence is: Amino Acid Sequence

The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT 3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The empirical formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0. Structural Formula

Orphenadrine citrate is the citrate salt of orphenadrine (2-dimethylaminoethyl 2- methylbenzhydryl ether citrate). It occurs as a white, crystalline powder having a bitter taste. It is practically odorless; sparingly soluble in water, slightly soluble in alcohol. It has the following structural formula: The empirical formula is C 18 H 23 NO·C 6 H 8 O 7 , representing a molecular weight of 461.50. Orphenadrine Citrate Injection, USP contains 60 mg of orphenadrine citrate in aqueous solution in each vial. Orphenadrine Citrate Injection, USP also contains: sodium metabisulfite NF, 2.0 mg; sodium chloride USP, 5.8 mg; sodium hydroxide NF, to adjust pH; and water for injection USP, q.s. to 2 mL. Orphenadrine citrate structural formula

Oxaliplatin is a platinum-based drug with the molecular formula C 8 H 14 N 2 O 4 Pt and the chemical name of cis -[(1 R ,2 R )-1,2-cyclohexanediamine- N , N ′] [oxalato(2-)- O , O ′] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin Injection, USP, for intravenous use, is supplied in vials containing 50 mg or 100 mg of oxaliplatin as a sterile, preservative-free, aqueous solution at a concentration of 5 mg/mL. Water for Injection, USP is present as an inactive ingredient. Tartaric Acid, NF and Sodium Hydroxide, NF are used in combination as a buffering system. Structural Formula

Paclitaxel Injection, USP is a clear colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multi-dose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, 527 mg of Polyoxyl 35 Castor Oil, NF, 49.7% (v/v) Dehydrated Alcohol, USP and 2 mg Citric Acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via an extraction process from Taxus X media ‘ Hicksii’. The chemical name for paclitaxel is (2a R ,4 S ,4a S ,6 R ,9 S ,11 S ,12 S ,12a R ,12b S )-1,2a,3,4,4a,6,9,10,11,12,12a,12b-Dodecahydro-4,6,9,11,12,-12b-hexahydroxy-4a,8,13,13-tetramethyl-7,11-methano-5 H -cyclodeca [3,4] benz [1,2-b] oxet-5-one 6,12b-diacetate, 12-benzoate, 9-ester with (2 R ,3 S ) -N -benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula: Paclitaxel is a white to off-white crystalline powder with the empirical formula C 47 H 51 NO 14 and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216 to 217°C. Structural Formula

Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT 3 ) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3a S )-2-[( S )-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1 H benz[ de ]isoquinoline hydrochloride. The empirical formula is C 19 H 24 N 2 O•HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula: Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, disodium edetate dihydrate, trisodium citrate dihydrate and citrate buffer in water for intravenous administration. Hydrochloric acid or sodium hydroxide may have been added to adjust pH. The pH of the solution is 4.5 to 5.5. Structural Formula

Pemetrexed for Injection, USP is a folate analog metabolic inhibitor. The drug substance, pemetrexed disodium hemipentahydrate, has the chemical name L-glutamic acid, N -[4-[2-(2-amino-4,7-dihydro-4-oxo-1 H -pyrrolo[2,3- d ]pyrimidin-5-yl)ethyl]benzoyl]-, disodium salt, hemipentahydrate with a molecular formula of C 20 H 19 N 5 Na 2 O 6 •2.5H 2 O and a molecular weight of 516.41. The structural formula is as follows: Pemetrexed for Injection, USP is a sterile white to either light yellow or green-yellow lyophilized solid in single-dose vials to be reconstituted for intravenous infusion. Each 100 mg vial of pemetrexed for injection, USP contains 100 mg pemetrexed (equivalent to 120.8 mg pemetrexed disodium hemipentahydrate) and 106 mg mannitol. Each 500 mg vial of pemetrexed for injection, USP contains 500 mg pemetrexed (equivalent to 604 mg pemetrexed disodium hemipentahydrate) and 500 mg mannitol. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH. Structural formula

Penicillin G Potassium, USP is a natural penicillin. It is chemically designated 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylicacid,3,3-dimethyl-7-oxo-6-[(phenylacetyl)amino], monopotassium salt, [2 S -(2α, 5α, 6β)]. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. It is freely soluble in water, in isotonic sodium chloride solution and in dextrose solution. The structural formula is as shown below. C 16 H 17 KN 2 O 4 S M.W. 372.48 Buffered Penicillin G Potassium for Injection is a sterile, pyrogen-free powder for reconstitution. Buffered Penicillin G Potassium for Injection is an antibacterial agent for intramuscular, continuous intravenous drip, intrapleural or other local infusion, and intrathecal administration. Penicillin G Potassium for Injection, USP is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered with sodium citrate to a pH of 6.0 to 8.5. Structural Formula

The barbiturates are nonselective central nervous system depressants which are primarily used as sedative hypnotics and also anticonvulsants in subhypnotic doses. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act (See " Drug Abuse and Dependence " section). The sodium salts of amobarbital, pentobarbital, phenobarbital, and secobarbital are available as sterile parenteral solutions. Barbiturates are substituted pyrimidine derivatives in which the basic structure common to these drugs is barbituric acid, a substance which has no central nervous system (CNS) activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. Pentobarbital Sodium Injection, USP is a sterile solution for intravenous or intramuscular injection. Each mL contains pentobarbital sodium 50 mg, in a vehicle of propylene glycol, 40%, alcohol, 10% v/v and water for injection, to volume. The pH is adjusted to approximately 9.5 with hydrochloric acid and/or sodium hydroxide. Pentobarbital Sodium Injection, USP is a short-acting barbiturate, chemically designated as sodium 5-ethyl-5-(1-methylbutyl) barbiturate. The structural formula for Pentobarbital Sodium is: The sodium salt occurs as a white, slightly bitter powder which is freely soluble in water and alcohol but practically insoluble in benzene and ether. Structural Formula

Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)- m -hydroxy-α­[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C 9 H 14 ClNO 2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below: Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5. Structural Formula

Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2 S ,5 R ,6 R )-6-[( R )-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C 23 H 26 N 5 NaO 7 S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is: Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2 S ,3 S ,5 R )-3-methyl-7-oxo-3-(1 H -1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10 H 11 N 4 NaO 5 S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is: Piperacillin and Tazobactam for Injection, USP, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass bottles. Each Piperacillin and Tazobactam for Injection, USP 40.5 gram pharmacy bulk package bottle contains piperacillin sodium equivalent to 36 grams of piperacillin and tazobactam sodium equivalent to 4.5 grams of tazobactam sufficient for delivery of multiple doses. Piperacillin and Tazobactam for Injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na + ) per gram of piperacillin in the combination product. Meets the USP Organic Impurities modified Test Procedure 1. Chemical Structure of Piperacillin Sodium Chemical Structure of Tazobactam Sodium

Plerixafor Injection is a sterile, preservative-free, clear, colorless to pale-yellow, isotonic solution for subcutaneous injection. Each mL of the sterile solution contains 20 mg of plerixafor. Each single-dose vial is filled to deliver 1.2 mL of the sterile solution that contains 24 mg of plerixafor and 5.9 mg of sodium chloride in Water for Injection adjusted to a pH of 6.0 to 7.5 with hydrochloric acid and with sodium hydroxide, if required. Plerixafor is a hematopoietic stem cell mobilizer with a chemical name 1,4-Bis((1,4,8,11tetraazacyclotetradecan-1-yl)methyl)benzene. It has the molecular formula C 28 H 54 N 8 . The molecular weight of plerixafor is 502.79 g/mol. The structural formula is provided in Figure 1 . Figure 1: Structural Formula Plerixafor is a white to off-white crystalline solid. It is hygroscopic. Plerixafor has a typical melting point of 131.5°C. The partition coefficient of plerixafor between 1-octanol and pH 7 aqueous buffer is <0.1. Figure 1

Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B. polymyxa (B. aerosporous) . Polymyxin B sulfate is the sulfate salt of Polymyxins B 1 and B 2 , which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are: Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable. Structural Formulae

Procainamide Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of procainamide hydrochloride in water for injection. Each milliliter of the 2 mL vial contains procainamide hydrochloride 500 mg; methylparaben 1 mg and sodium metabisulfite 1.8 mg added in water for injection. Each milliliter of the 10 mL vial contains procainamide hydrochloride 100 mg; methylparaben 1 mg and sodium metabisulfite 0.8 mg added in water for injection. In both formulations, the solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.0 (4.0 to 6.0). Headspace nitrogen gassed. Procainamide Hydrochloride Injection is intended for intravenous or intramuscular administration. Procainamide hydrochloride, a Group 1A cardiac antiarrhythmic drug, is ρ-amino-N-[2-(diethylamino) ethyl] benzamide mono-hydrochloride. It has the following structural formula: *(locus for acetylation to N-acetyl procainamide). It differs from procaine which is the p-aminobenzoyl ester of 2-(diethylamino)-ethanol. Procainamide as the free base has a pK a of 9.23; the monohydrochloride is very soluble in water. structural formula

Prochlorperazine edisylate, 2-Chloro-10-[3-(4-methyl-1-piperazinyl)propyl]phenothiazine 1,2- ethanedisulfonate (1:1), has the following structural formula: C 20 H 24 ClN 3 S·C 2 H 6 O 6 S 2 MW 564.14 Prochlorperazine Edisylate Injection, an antiemetic and antipsychotic, is a sterile solution intended for intramuscular or intravenous administration. Each mL contains prochlorperazine 5 mg as the edisylate, monobasic sodium phosphate monohydrate 5 mg, sodium tartrate dihydrate 12 mg, saccharin sodium 0.9 mg and benzyl alcohol 7.5 mg in Water for Injection. pH 4.2 to 6.2. Figure

Propofol Injectable Emulsion, USP is a sterile, nonpyrogenic emulsion containing 10 mg per mL of propofol, USP suitable for intravenous administration. Propofol, USP is chemically described as 2, 6-diisopropylphenol. The structural formula is: Propofol, USP is very slightly soluble in water and, thus, is formulated in a white, oil-in-water emulsion. The pKa is 11. The octanol/water partition coefficient for propofol, USP is 6761:1 at a pH of 6 to 8.5. In addition to the active component, propofol, USP, the formulation also contains soybean oil (100 mg per mL), glycerol (22.5 mg per mL), egg yolk phospholipid (12 mg per mL), and sodium metabisulfite (0.25 mg per mL); with sodium hydroxide to adjust pH. The Propofol Injectable Emulsion, USP is isotonic and has a pH of 4.5 to 6.6. Structural Formula

Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is: The chemical formula is C 32 H 53 BrN 2 O 4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide. Structural Formula

Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula: C 17 H 26 N 2 O•HCl•H 2 O M.W. 328.89 At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n -octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg or 5.3 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg or 8 mg of sodium chloride respectively for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C. Figure

Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula: At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n -octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine ( 8.1 ) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg ropivacaine hydrochloride anhydrous), and 8.6 mg of sodium chloride for isotonicity, and sodium hydroxide as pH adjuster, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C. structural formula

Thiamine Hydrochloride Injection, USP is a sterile solution of thiamine hydrochloride in Water for Injection for intramuscular (IM) or slow intravenous (IV) administration. Each mL contains: Thiamine hydrochloride 100 mg; chlorobutanol anhydrous (chloral derivative) 0.5%; monothioglycerol 0.5%; Water for Injection q.s. Sodium hydroxide may have been added for pH adjustment (2.5 to 4.5). Thiamine hydrochloride, or vitamin B 1 , occurs as white crystals or crystalline powder that usually has a slight characteristic odor. Freely soluble in water; soluble in glycerin; slightly soluble in alcohol; insoluble in ether and benzene. Thiamine is rapidly destroyed in neutral or alkaline solutions but is stable in the dry state. It is reasonably stable to heat in acid solution. The chemical name of thiamine hydrochloride is thiazolium,3-[(4-amino-2-methyl-5-pyrimidinyl)methyl]-5-(2-hydroxyethyl)-4- methylchloride, monohydrochloride and it has the following structural formula: C 12 H 17 CIN 4 OS • HCl M.W. 337.27 Structural Formula

Thiotepa for Injection, USP is an ethylenimine-type compound. It is supplied as a non-pyrogenic, sterile lyophilized powder for intravenous, intracavitary or intravesical administration, containing 15 mg of thiotepa. Thiotepa is a synthetic product with antitumor activity. The chemical name for thiotepa is Aziridine, 1,1',1''-phosphinothioylidynetris-, or Tris (1-aziridinyl) phosphine sulfide. Thiotepa has the following structural formula: Thiotepa has the empirical formula C 6 H 12 N 3 PS, and a molecular weight of 189.22. When reconstituted with sterile water for injection, the resulting solution has a pH of approximately 5.5 to 7.5. Thiotepa is stable in alkaline medium and unstable in acid medium. Structural Formula

Timolol Maleate Ophthalmic Gel Forming Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is: 25° [α] in 1.0N HCl (C = 5%) = -12.2° (-11.7° to -12.5°). 405 nm Its molecular formula is C 13 H 24 N 4 O 3 S•C 4 H 4 O 4 and its structural formula is: Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Sterile Ophthalmic Gel Forming Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. The pH of the solution is approximately 7.0, and the osmolarity is 260 to 330 mOsm. Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). Each mL of Timolol Maleate Ophthalmic Gel Forming Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: gellan gum, tromethamine, mannitol, and water for injection. Preservative: benzododecinium bromide 0.012%. The gel forming solution contains a purified anionic heteropolysaccharide derived from gellan gum. An aqueous solution of gellan gum, in the presence of a cation, has the ability to gel. Upon contact with the precorneal tear film, Timolol Maleate Ophthalmic Gel Forming Solution forms a gel that is subsequently removed by the flow of tears. Structural Formula

Tirofiban hydrochloride injection contains tirofiban hydrochloride, a non-peptide antagonist of the platelet GP IIb/IIIa receptor, which inhibits platelet aggregation. Tirofiban hydrochloride monohydrate is chemically described as N- (butylsulfonyl)- O -[4-(4-piperidinyl)butyl]-L-tyrosine monohydrochloride monohydrate. Its molecular formula is C 22 H 36 N 2 O 5 S•HCl•H 2 O and its structural formula is: Tirofiban hydrochloride monohydrate is a white to off-white, non-hygroscopic, free-flowing powder, with a molecular weight of 495.08. It is very slightly soluble in water. Tirofiban hydrochloride injection is supplied as a sterile solution in water for injection, for intravenous use. The pH of the solution ranges from 5.5 to 6.5 adjusted with hydrochloric acid and/or sodium hydroxide. Each 250 mL of the premixed, isosmotic intravenous injection contains 14.045 mg tirofiban hydrochloride monohydrate equivalent to 12.5 mg tirofiban (50 mcg per mL) and the following inactive ingredients: 2.25 g sodium chloride, 135 mg sodium citrate dihydrate, and 8 mg citric acid anhydrous. Structural Formula

Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is Empirical Formula: C 8 H 15 NO 2 Molecular Weight: 157.2 Tranexamic Acid in Sodium Chloride Injection is a clear to colorless sterile, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains 1,000 mg tranexamic acid, USP, 700 mg of sodium chloride, USP and Water for Injection, USP. The aqueous solution has a pH of 6.5 to 8.0. Structural Formula

Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is Empirical Formula: C 8 H 15 NO 2 Molecular Weight: 157.2 Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0. Structural Formula

Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is Empirical Formula: C 8 H 15 NO 2 Molecular Weight: 157.2 Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0. structural formula

Travoprost is a synthetic prostaglandin F analog. Its chemical name is [1 R -[1α( Z ),2β(1 E ,3 R *),3α,5α]]-7-[3,5-Dihydroxy-2-[3-hydroxy-4-[3-(trifluoromethyl) phenoxy]-1-butenyl]cyclopentyl]-5-heptenoic acid, 1-methylethylester. It has a molecular formula of C 26 H 35 F 3 O 6 and a molecular weight of 500.55 g/mol. The chemical structure of travoprost is: Travoprost, USP is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 5.7 and an osmolality of approximately 290 mOsmol/kg. Travoprost Ophthalmic Solution, USP (ionic buffered solution) 0.004% contains Active: travoprost, USP 0.04 mg per mL; Inactives: polyoxyl 40 hydrogenated castor oil, boric acid, propylene glycol, sorbitol, zinc chloride, sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. Preserved in the bottle with an ionic buffered system. Chemical Structure of Travoprost