rising pharma holdings, inc. - Medication Listings

Uses temporarily relieves pain and itching associated with: insect bites, minor burns, sunburn, minor skin irritations, minor cuts, scrapes, rashes due to poison ivy, poison oak and poison sumac dries the oozing and weeping of poison ivy, poison oak and poison sumac

Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature: (±)-1-[( R *)- sec -butyl]-4-[ p -[4-[ p -[[(2 R *,4 S *)-2-(2,4-dichlorophenyl)-2-(1 H -1,2,4-triazol-1­-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2 -1,2,4-triazolin-5-one mixture with (±)-1-[( R *)- sec -butyl]-4-[ p -[4-[ p -[[(2 S *,4 R *)-2-(2,4-dichlorophenyl)-2-(1 H ­-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2 -1,2,4­-triazolin-5-one or (±)-1-[( RS )- sec -butyl]-4-[ p -[4-[ p -[[(2 R ,4 S )-2-(2,4-dichlorophenyl)-2-(1 H -1,2,4-triazol-1­ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ 2 -1,2,4-triazolin-5-one Itraconazole has a molecular formula of C 35 H 38 Cl 2 N 8 O 4 and a molecular weight of 705.64. It is a white to almost white powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres. Inactive ingredients are gelatin capsule, hypromellose, Polyethylene Glycol and Sugar spheres (composed of sucrose, corn starch). Gelatin capsules include gelatin and titanium dioxide. Black ink contains Iron Oxide Black, Potassium Hydroxide, Propylene Glycol, Shellac, and Strong Ammonia Solution. structure

Uses temporarily relieves minor pain associated with: arthritis simple backache muscle strains sprains bruises cramps joint pain

Lactulose is a synthetic disaccharide in solution form for oral or rectal administration. Each 15 mL of Lactulose Solution USP contains 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 0.1 g or less of fructose). It also contains D&C Yellow No. 10, FD & C Yellow No. 6 and Purified Water. Lactulose is a colonic acidifier for treatment and prevention of portal-systemic encephalopathy. The chemical name for lactulose is 4-0-ß-D-galactopyranos-D-fructofuranose. It has the following structural formula: The molecular weight is 342.30. It is freely soluble in water. struc

Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV. The chemical name of lamivudine is (2R,cis)-4-amino-l-(2-hydroxymethyl-l,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2',3'-dideoxy, 3'-thiacytidine. It has a molecular formula of C 8 H 11 N 3 O 3 S and a molecular weight of 229.3 g per mol. It has the following structural formula: Lamivudine USP is a white to off-white crystalline solid with a solubility of approximately 70 mg per mL in water at 20°C. Lamivudine oral solution USP is for oral administration. One milliliter (1 mL) of lamivudine oral solution USP contains 10 mg of lamivudine USP (10 mg per mL) in an aqueous solution and the inactive ingredients are liquid strawberry flavor, liquid banana flavor, citric acid (anhydrous), methylparaben, propylene glycol, propylparaben, sodium citrate (dihydrate), and sucrose (200 mg). Chemical Structure

Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as -triazine, its molecular formula is C 9 H 7 N 5 Cl 2 , and its molecular weight is 256.09. Lamotrigine USP is a white to pale cream-colored powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is: Lamotrigine tablets for oral suspension, USP are supplied for oral administration. The tablets contain 5 mg (white to off-white) or 25 mg (white to off-white) of lamotrigine USP and the following inactive ingredients: black currant flavor, magnesium carbonate, magnesium stearate, microcrystalline cellulose, polacrilin potassium, povidone (PVPK-30), and sucralose. The black currant flavor contains acetic acid, artificial flavors, benzyl alcohol, caramel color, maltodextrin, and triacetin. The tablets for oral suspension meet Organic Impurities Procedure 2 as published in the current USP monograph for Lamotrigine Tablets for Oral Suspension, USP. Chemical Structure

Lansoprazole delayed-release capsules USP, amoxicillin capsules USP, and clarithromycin tablets USP consist of a daily administration card containing two lansoprazole 30 mg delayed-release capsules USP, four amoxicillin 500 mg capsules USP, and two clarithromycin 500 mg tablets USP, for oral administration. Lansoprazole Delayed-Release Capsules, USP The active ingredient in lansoprazole delayed-release capsules USP is lansoprazole, a proton pump inhibitor. Its empirical formula is C 16 H 14 F 3 N 3 O 2 S with a molecular weight of 369.37. Lansoprazole has the following structure: Lansoprazole USP is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Each delayed-release capsule contains enteric-coated pellets consisting of 30 mg of lansoprazole USP (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (which contain sucrose and corn starch), talc, and titanium dioxide. Components of the gelatin capsule include D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, sodium lauryl sulfate, and titanium dioxide. Amoxicillin Capsules, USP Amoxicillin, is a penicillin class antibacterial, with a broad spectrum of bactericidal activity against many gram-positive and gram-negative microorganisms. Chemically it is (2 S , 5 R , 6 R )-6-[( R )-(-)-2-amino-2-( p -hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylic acid trihydrate. The molecular formula is C 16 H 19 N 3 O 5 S•3H 2 O and the molecular weight of 419.45. Amoxicillin has the following structure: Amoxicillin capsules USP are intended for oral administration. The pink body with blue cap capsules contain amoxicillin trihydrate equivalent to 500 mg of amoxicillin USP. Inactive ingredients: Capsule shells - D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, sodium lauryl sulfate and titanium dioxide; Capsule contents – magnesium stearate, microcrystalline cellulose. Meets USP Dissolution Test 2. Clarithromycin Tablets, USP Clarithromycin is a macrolide antimicrobial. Chemically, it is 6- O -methylerythromycin. The molecular formula is C 38 H 69 NO 13 , and the molecular weight is 747.96. Clarithromycin has the following structure: Clarithromycin USP is a white or almost white, crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Each light yellow colored, oval shaped, biconvex film-coated immediate-release tablet contains 500 mg of clarithromycin USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide yellow, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, sorbic acid, titanium dioxide, and vanillin. lansoprazole-amoxicillin-clarithromycin-structure-1.jpg lansoprazole-amoxicillin-clarithromycin-structure-2.jpg lansoprazole-amoxicillin-clarithromycin-structure-3.jpg

Latanoprost is a prostaglandin F 2α analogue. Its chemical name is isopropyl-(Z)-7[(1R,2R,3R,5S)3,5-dihydroxy-2-[(3R)-3-hydroxy-5-phenylpentyl] cyclopentyl]-5-heptenoate. Its molecular formula is C 26 H 40 O 5 and its chemical structure is: Latanoprost is a colorless to slightly yellow oil that is very soluble in acetonitrile and freely soluble in acetone, ethanol, ethyl acetate, isopropanol, methanol, and octanol. It is practically insoluble in water. Latanoprost Ophthalmic Solution 0.005% is supplied as a sterile, isotonic, buffered aqueous solution of latanoprost with a pH of approximately 6.7 and an osmolality of approximately 267 mOsmol/kg. Each mL of Latanoprost Ophthalmic Solution contains 50 mcg of latanoprost. Benzalkonium chloride, 0.02% is added as a preservative. The inactive ingredients are: sodium chloride, sodium dihydrogen phosphate monohydrate, disodium hydrogen phosphate anhydrous, and water for injection. One drop contains approximately 1.5 mcg of latanoprost. Structure

Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white to off-white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8 H 14 N 2 O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula: Levetiracetam USP is a white to off-white, crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.) Levetiracetam tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, povidone, talc, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and purified water. In addition 250 mg contains FD&C Blue #2/indigo carmine aluminum lake, 500 mg contains iron oxide yellow, and 750 mg contains FD&C Yellow #6/sunset yellow FCF aluminum lake, FD&C Blue #2/indigo carmine aluminum lake, and iron oxide red. Meets USP dissolution test 2. Chemical Structure

Levetiracetam, USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (dark pink), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8 H 14 N 2 O 2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula: Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.) Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: copovidone, croscarmellose sodium, magnesium stearate, polyethylene glycol 3350, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc, titanium dioxide, and additional agents listed below: 250 mg tablets: FD&C Blue #2/Indigo Carmine Aluminum Lake 500 mg tablets: Iron Oxide Yellow 750 mg tablets: FD&C Red #40/Allura Red A C Aluminum Lake levetiracetam-str

Levocarnitine is a carrier molecule in the transport of long-chain fatty acids across the inner mitochondrial membrane. The chemical name of levocarnitine is (R)-3-carboxy-2-hydroxy-N,N,N-trimethy-1-propanaminium hydroxide, inner salt. Levocarnitine is a white, crystalline powder or colourless crystals. It is freely soluble in water, soluble in warm alcohol, practically insoluble in acetone. The specific rotation of levocarnitine is between -29° and -32°. Its chemical structure is: Empirical Formula: C 7 H 15 NO 3 Molecular Weight: 161.20 Each levocarnitine tablet, USP intended for oral administration contains 330 mg of levocarnitine. In addition, it also contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. levocarnitine-struc

Levocarnitine is a carrier molecule in the transport of long-chain fatty acids across the inner mitochondrial membrane. The chemical name of levocarnitine is 3-carboxy-2(R)-hydroxy-N,N,N-trimethyl-1-propanaminium, inner salt. Levocarnitine is a white crystalline, hygroscopic powder. It is readily soluble in water, hot alcohol, and insoluble in acetone. The specific rotation of levocarnitine is between -29° and -32°. Its chemical structure is: Molecular Formula: C 7 H 15 NO 3 Molecular Weight: 161.20 Each 118 mL container of Levocarnitine Oral Solution USP contains 1 g of levocarnitine/10 mL. Also contains: Artificial Cherry Flavor, D,L,-Malic Acid, Purified Water, Sucrose Syrup. Methylparaben NF and Propylparaben NF are added as preservatives. The pH is approximately 5. levocarnitine-stru 1

Uses Temporarily relieves the pain and itching due to anorectal disorders.

Linezolid tablets USP contain linezolid, USP, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl]methyl]-acetamide. The molecular formula is C 16 H 20 FN 3 O 4 . Its molecular weight is 337.35, and its chemical structure is represented below: Linezolid tablets USP for oral administration contain 600 mg linezolid USP as a film-coated compressed tablet. Inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate, titanium dioxide and triacetin. The sodium (Na + ) content is 6.4 mg per 600 mg tablet (0.3 mEq per tablet). Meets USP Dissolution Test 2. linezolid-structure.jpg

Lithium carbonate extended-release tablets USP contain lithium carbonate, a white odorless alkaline powder with molecular formula Li 2 CO 3 and molecular weight 73.89. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Each peach-colored, round biconvex film-coated, extended-release tablet contains 300 mg of lithium carbonate. This slowly dissolving film-coated tablet is designed to give lower serum lithium peak concentrations than obtained with conventional oral lithium dosage forms. Inactive ingredients consist of black ink S-1-277001 (contains Black Iron Oxide, Propylene Glycol, Shellac Glaze (Modified) IN SD-45), calcium stearate, hypromellose, opadry pink (carnauba wax, FD&C Blue No. 2 Aluminium Lake, FD&C Red No. 40 Aluminium Lake, FD&C Yellow No. 6 Aluminium Lake, hypromellose, polyethylene glycol, propylene glycol, titanium dioxide), povidone and sodium lauryl sulfate.

Lithium Carbonate Extended-Release Tablets contains lithium carbonate, a white, light alkaline powder with molecular formula Li 2 CO 3 and molecular weight 73.89. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94 and an emission line at 671 nm on the flame photometer. Lithium Carbonate Extended-Release Tablets: Each white to off white round tablets scored on one side and engraved with P;450 on the other side, contains lithium carbonate, 450 mg. Inactive ingredients consist of sodium alginate, sodium starch glycolate, povidone, ferric oxide yellow, and magnesium stearate. Lithium Carbonate Extended-Release Tablets 450 mg are designed to release a portion of the dose initially and the remainder gradually; the release pattern of the controlled release tablets reduces the variability in lithium blood levels seen with the immediate release dosage forms. Meets USP Dissolution Test 2

Lorazepam USP, an antianxiety agent, has the chemical formula, (±)7-Chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2 H -1,4-benzodiazepin-2-one: C 15 H 10 Cl 2 N 2 O 2 M.W. 321.16 It is a white or practically white powder almost insoluble in water. Each Lorazepam Tablet USP, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose and Polacrilin Potassium. FDA approved dissolution test specifications differ from USP. Image

Uses prevents and treats nausea, vomiting or dizziness associated with motion sickness.

Uses prevents and treats nausea, vomiting or dizziness due to motion sickness.

Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula: Chemically, meclizine hydrochloride is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Tablets Inactive ingredients for the tablets are: corn starch; dibasic calcium phosphate; magnesium stearate; polyethylene glycol; sucrose. The 12.5 mg tablets also contain: FD&C Blue # 1. The 25 mg tablets also contain: FD&C Yellow # 6 and D&C Yellow # 10. The 50 mg tablets also contain: FD&C Blue # 1, FD&C Yellow # 6 and D&C Yellow # 10. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base. Each meclizine hydrochloride 50 mg tablet contains 50 mg of meclizine dihydrochloride equivalent to 42.14 mg of meclizine free base. Chewable Tablets Inactive ingredients for the chewable tablets are: corn starch, colloidal silicon dioxide, FD&C Red # 40, lactose monohydrate, magnesium stearate, raspberry flavor, saccharin sodium, and talc. Each meclizine hydrochloride 25 mg chewable tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base. struct-1.jpg

Memantine hydrochloride extended-release capsules are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride, USP is 3,5-Dimethyltricyclo[3.3.1.1 3,7 ]decan-1-amine hydrochloride with the following structural formula: The molecular formula is C 12 H 21 N•HCl and the molecular weight is 215.76. Memantine hydrochloride, USP occurs as a white to off-white powder and is slightly soluble in water. Memantine hydrochloride extended-release capsules are supplied for oral administration as 7 mg, 14 mg, 21 mg, and 28 mg capsules. Each capsule contains extended-release beads with the labeled amount of memantine hydrochloride and the following inactive ingredients: ethyl cellulose, ferric oxide yellow, gelatin, hydroxypropyl cellulose, hypromellose, sodium lauryl sulfate, sugar spheres (corn starch and sucrose), talc and titanium dioxide. The 7 mg and 14 mg capsules also contain ferric oxide red, and the 14 mg, 21 mg and 28 mg capsules also contain FD&C Blue No. 2. In addition, the black imprinting ink contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze. memantine-struct.jpg

The active ingredient in Mesalamine Suppository USP, 1,000 mg for rectal use is mesalamine USP, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine, USP is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each mesalamine rectal suppository USP contains 1,000 mg of mesalamine, USP in a base of hard fat. The empirical formula is C 7 H 7 NO 3 , representing a molecular weight of 153.14. The structural formula is: mesalamine-structure.jpg

The active ingredient in mesalamine suppositories 1000 mg for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an anti-inflammatory drug. Each mesalamine suppository contains 1000 mg of mesalamine (USP) in a base of Hard Fat, NF. The empirical formula is C 7 H 7 NO 3 , representing a molecular weight of 153.14. The structural formula is: chemical-structure

Methimazole, USP (1-methylimidazole-2-thiol) is a white, crystalline substance that is freely soluble in water. It differs chemically from the drugs of the thiouracil series primarily because it has a 5- instead of a 6-membered ring. Methimazole tablet, USP contains 5 or 10 mg (43.8 or 87.6 μmol) methimazole, an orally administered antithyroid drug. Each tablet also contains lactose monohydrate, magnesium stearate, and pregelatinized maize starch. The molecular weight is 114.16, and the molecular formula is C 4 H 6 N 2 S. The structural formula is as follows: methimazole-struc.jpg

Methyldopa is an antihypertensive and is the L-isomer of alpha-methyldopa. It is levo-3-(3,4-dihydroxyphenyl)-2-methylalanine sesquihydrate. Methyldopa is supplied as tablets for oral administration, containing 250 mg and 500 mg of methyldopa. The amount of methyldopa is calculated on the anhydrous basis. Its molecular formula is C 10 H 13 NO 4 •1 1/2 H 2 O, with a molecular weight of 238.24, and its structural formula is: Methyldopa is a white to yellowish white, odorless fine powder and is sparingly soluble in water. The tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate, titanium dioxide, triacetin, FD&C yellow No. 6 aluminum lake and FD&C blue No. 2 aluminum lake. structure-methyldopa

Methylergonovine maleate is a semi-synthetic ergot alkaloid used for the prevention and control of postpartum hemorrhage. Methylergonovine maleate is available in tablets for oral ingestion containing 0.2 mg methylergonovine maleate. Tablets Active ingredient : Methylergonovine maleate, USP, 0.2 mg. Inactive ingredients : acacia, corn starch, gelatin, lactose monohydrate, methyl paraben, microcrystalline cellulose, povidone, propyl paraben, stearic acid, and tartaric acid. Chemically, methylergonovine maleate is designated as ergoline-8-carboxamide, 9, 10-didehydro-N-[1-(hydroxymethyl) propyl]-6-methyl-, [8β( S )]-, (Z)-2-butenedioate (1:1) (salt). Its structural formula is: Methylergonovine -structure.jpg

Methylphenidate hydrochloride is a mild central nervous system (CNS) stimulant, available as 2.5 mg, 5 mg and 10 mg chewable tablets for oral administration. methylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is Methylphenidate hydrochloride USP is a white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Each Methylphenidate Hydrochloride Chewable Tablet, for oral administration, contains 2.5 mg, 5 mg or 10 mg of methylphenidate hydrochloride USP. In addition, Methylphenidate Hydrochloride Chewable Tablets also contain the following inactive ingredients: microcrystalline cellulose, grape flavor, guar gum, maltose, stearic acid, and sucralose. methylphenidate-structure

Metoprolol tartrate tablets, USP contain metoprolol tartrate, a selective beta 1 -adrenoreceptor blocking agent. Metoprolol tartrate is (±)-1-(isopropylamino)-3-[ p -(2-methoxyethyl)phenoxy]-2-propanol (2:1) dextro -tartrate salt, and its structural formula is Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Metoprolol tartrate tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration containing 25 mg, 50 mg and 100 mg metoprolol tartrate, respectively. The tablets contain the following inactive ingredients: microcrystalline cellulose, corn starch, sodium starch glycollate, colloidal silicon dioxide, sodium lauryl sulfate, talc, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition, 50 mg tablet contains D&C Red #30 Aluminium Lake and 100 mg tablet contains FD&C Blue #2 Aluminium Lake as coloring agents. Chemical Structure

Metronidazole tablets USP, 250 mg or 500 mg is an oral formulation of the synthetic nitroimidazole antimicrobial, 2-methyl-5-nitro-1H-imidazole-1-ethanol, which has the following structural formula: Metronidazole tablets USP contain 250 mg or 500 mg of metronidazole USP. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, and stearic acid. Chemical Structure

Mexiletine hydrochloride, USP is an orally active antiarrhythmic agent. It is a white or almost white crystalline powder, freely soluble in water, Methanol and sparingly soluble in Methylene Chloride. Mexiletine hydrochloride, USP has a pKa of 9.2. The chemical name of mexiletine hydrochloride, USP is 1- methyl-2-(2,6-xylyloxy)ethylamine hydrochloride and its structural formula is: C 11 H 17 NO. HCl M. W. 215.72 g/mole Each capsule for oral administration, contains 150 mg, 200 mg, or 250 mg of mexiletine hydrochloride, USP. 100 mg of mexiletine hydrochloride, USP is equivalent to 83.31 mg of mexiletine base. In addition, each capsule contains the following excipients: colloidal silicon dioxide, magnesium stearate and partially pregelatinized maize starch. The capsule shell contains D & C Yellow #10, gelatin and titanium dioxide. The 150 mg and 250 mg also contain FD&C Blue #1, FD&C Red #40, The 150 mg and 200 mg also contain FD&C Yellow #6. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide, and purified water. The product complies with USP Dissolution Test 2. structure

Uses cures most athlete's foot, jock itch and ringworm relieves itching, burning, cracking, scaling, discomfort and chafing associated with jock itch

Name: Midodrine Hydrochloride Tablets Dosage Form: 2.5-mg, 5-mg and 10-mg tablets for oral administration Active Ingredient: Midodrine hydrochloride, 2.5 mg, 5 mg and 10 mg Inactive Ingredients: Colloidal Silicon Dioxide NF, Croscarmellose Sodium NF, Magnesium Stearate NF, Microcrystalline Cellulose NF, Pregelatinized Starch NF and Sodium Lauryl Sulfate NF. Pharmacological Classification: Vasopressor/Antihypotensive Chemical Names (USAN: Midodrine Hydrochloride): (1) Acetamide, 2-amino-N-[2-(2,5dimethoxyphenyl)-2-hydroxyethyl]-monohydrochloride, (±)-; (2) (±)-2-amino-N-(ß-hydroxy-2,5-dimethoxyphenethyl) acetamide monohydrochloride BAN, INN, JAN: Midodrine Structural formula: Molecular formula: C 12 H 18 N 2 O 4 HCl; Molecular Weight: 290.7 Organoleptic Properties: White to off-white powder Solubility: Water: Soluble Methanol: Sparingly soluble pKa: 7.8 (0.3% aqueous solution) pH: 3.5 to 5.5 (5% aqueous solution) Melting Range: 200 to 203°C structure-midodrine

Uses • relieves occasional constipation (irregularity) • usually produces bowel movement in ½ hour to 6 hours

Mirtazapine tablets, USP contain mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17 H 19 N 3 . Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture: Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow. Chemical Structure

Mirtazapine orally disintegrating tablet, USP contains mirtazapine USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino [2,1-a] pyrido [2,3-c][2] benzazepine and has the molecular formula of C 17 H 19 N 3 . Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture: Mirtazapine is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine orally disintegrating tablets, USP are available for oral administration as an orally disintegrating tablet containing 15 mg, 30 mg or 45 mg of mirtazapine USP. Mirtazapine orally disintegrating tablets, USP also contain the following inactive ingredients: aspartame, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, natural and artificial peppermint flavor, and strawberry guarana flavor. chemical structure

Modafinil tablets, USP are a wakefulness-promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2-[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C 15 H 15 NO 2 S and the molecular weight is 273.35. The chemical structure is: Modafinil USP is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. Modafinil tablets, USP contain 100 mg or 200 mg of modafinil USP and the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, and povidone. Chemical Structure

Moxifloxacin hydrochloride is a synthetic antibacterial agent for oral administration. Moxifloxacin, a fluoroquinolone, is available as the monohydrochloride salt of 1-cyclopropyl-7-[(S,S)­-2,8-diazabicyclo[4.3.0]non-8-yl]-6-fluoro-8-methoxy-1,4-dihydro-4-oxo-3 quinoline carboxylic acid. It is a slightly yellow to yellow powder or crystals, slightly hygroscopic substance with a molecular weight of 437.9. Its molecular formula is C 21 H 24 FN 3 O 4 *HCl and its chemical structure is as follows: 11.1 Moxifloxacin Tablets, USP Moxifloxacin tablets, USP are available as film-coated tablets containing 400 mg moxifloxacin (equivalent to 436.33 mg moxifloxacin hydrochloride USP). The inactive ingredients are hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide. Structure

Uses helps loosen phlegm (mucus) and thin bronchial secretions to make coughs more productive.

Uses helps loosen phlegm (mucus) and thin bronchial secretions to make coughs more productive temporarily relieves cough due to minor throat and bronchial irritation as may occur with a cold

Nateglinide Tablets, USP are an oral blood glucose-lowering drug of the glinide class. Nateglinide Tablets, (-)-N- [(trans-4-isopropylcyclohexane)carbonyl]-D-phenylalanine, are structurally unrelated to the oral sulfonylurea insulin secretagogues. The structural formula is as shown: Nateglinide, USP is a white powder with a molecular weight of 317.43 g/mol. It is freely soluble in methanol, ethanol, and chloroform, soluble in ether, sparingly soluble in acetonitrile and octanol, and practically insoluble in water. Nateglinide Tablets, USP biconvex tablets contain 60 mg, or 120 mg, of nateglinide for oral administration. Inactive Ingredients: colloidal silicon dioxide, corn starch, hypromellose, mannitol, polyethylene glycol, povidone, sodium starch glycolate, sodium stearyl fumarate, talc, titanium dioxide. In addition, the 60 mg contains iron oxide red and the 120 mg contains iron oxide yellow. nateglinide-structure

Neomycin and Polymyxin B Sulfates and Hydrocortisone Otic Suspension, USP is a sterile antibacterial and anti-inflammatory suspension for otic use. Each mL contains: neomycin sulfate equivalent to 3.5 mg neomycin base, polymyxin B sulfate equivalent to 10,000 polymyxin B units, and hydrocortisone 10 mg (1%). The vehicle contains thimerosal 0.01% (added as a preservative) and the inactive ingredients cetyl alcohol, propylene glycol, polysorbate 80, and Water for Injection. Sulfuric acid may be added to adjust pH. Neomycin sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600 mcg of neomycin standard per mg, calculated on an anhydrous basis. The structural formulae are: Polymyxin B sulfate is the sulfate salt of polymyxin B1 and B2, which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are: Hydrocortisone, 11β, 17, 21-trihydroxypregn-4-ene-3, 20-dione, is an anti-inflammatory hormone. Its structural formula is: struct1 struct2 struct3

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Nitazoxanide tablets contain the active ingredient, nitazoxanide, a synthetic antiprotozoal for oral administration. Nitazoxanide is a pale yellow to yellow crystalline powder. It is poorly soluble in ethanol and practically insoluble in water. Chemically, nitazoxanide is 2-acetyloxy- N -(5-nitro-2-thiazolyl) benzamide. The molecular formula is C 12 H 9 N 3 O 5 S and the molecular weight is 307.3. The structural formula is: Nitazoxanide tablets contain 500 mg of nitazoxanide and the following inactive ingredients: maize starch, partially pregelatinized maize starch, sodium starch glycolate, hypromellose, talc, magnesium stearate, soy lecithin, polyvinyl alcohol, xanthan gum, titanium dioxide, D&C Yellow No.10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No.2 Aluminum Lake. nitazoxanide-structure.jpg

Nitrofurantoin oral suspension, USP contains nitrofurantoin, a synthetic nitrofuran antibacterial agent specific for urinary tract infections. The chemical name is 1-[[(5-nitro-2-furanyl)methylene]amino]-2,4 imidazolidinedione monohydrate. The molecular formula is C 8 H 6 N 4 O 5 ꞏH 2 O and the molecular weight is 256.17. The structural formula is: Nitrofurantoin is a stable, lemon-yellow, crystalline powder. Nitrofurantoin oral suspension, USP is available as an yellow color, flavored homogenous suspension for oral administration containing 25 mg/5 mL of nitrofurantoin. Nitrofurantoin oral suspension, USP also contains the following inactive ingredients: banana flavor, carboxymethylcellulose sodium, citric acid monohydrate, glycerin, magnesium aluminum silicate, methylparaben, N&A mint flavor, non-crystallizing sorbitol solution, propylparaben, purified water and sodium citrate. nitrofurantoin-structure

Nitrofurantoin oral suspension contains nitrofurantoin, a synthetic nitrofuran antibacterial agent specific for urinary tract infections. The chemical name is 1-[[(5-nitro-2-furanyl)methylene]amino]-2,4-imidazolidinedione monohydrate. The molecular formula is C 8 H 6 N 4 O 5 ꞏH 2 O and the molecular weight is 256.17. The structural formula is: Nitrofurantoin is a stable, yellow, crystalline compound. Nitrofurantoin oral suspension is available as an opaque, yellow liquid suspension for oral administration containing 25 mg/5 mL and 50 mg/5 mL of nitrofurantoin. Nitrofurantoin oral suspension also contains the following inactive ingredients: carboxymethylcellulose sodium, citric acid, flavors, glycerin, magnesium aluminum silicate, methylparaben, propylparaben, purified water, sodium citrate, and sorbitol. nitrofurantoin-structure

Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula: Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water (1 in 2.5), slightly soluble in 96% Ethanol (1 in 300), practically insoluble in Chloroform and in Ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas. norepinephrine-spl-structure

Ofloxacin ophthalmic solution 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. Chemical Name: (±)-9-Fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo- 7H pyrido [1,2,3- de ]-1,4 benzoxazine-6-carboxylic acid. Contains: Active: ofloxacin 0.3% (3 mg/mL) Preservative: benzalkonium chloride (0.005%) Inactives: sodium chloride and water for injection. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin ophthalmic solution is unbuffered and formulated with a pH of 6.4 (range 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure. Structure

Ofloxacin otic solution 0.3% is a sterile aqueous anti-infective (antibacterial) solution for otic use. Chemically, ofloxacin has three condensed 6-membered rings made up of a fluorinated carboxyquinolone with a benzoxazine ring. The chemical name of ofloxacin is:(±)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4-benzoxazine-6-carboxylic acid. The empirical formula of ofloxacin is C 18 H 20 FN 3 O 4 and its molecular weight is 361.38. The structural formula is: Image Ofloxacin Otic contains 0.3% (3mg/ml) ofloxacin with benzalkonium chloride (0.0025%), sodium chloride (0.9%), and water for injection. Hydrochloric acid and sodium hydroxide are added to adjust the pH to 6.5 ± 0.5. Structure