proficient rx lp - Medication Listings

Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1 receptor subtype. Valsartan is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide. C:\Users\RA\Desktop\Untitled.jpg

Valsartan USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1 receptor subtype. Valsartan USP is chemically described as N -(1-oxopentyl)- N -[[2'-(1 H -tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan USP is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, iron oxides (yellow, black and/or red), microcrystalline cellulose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. valsartan

Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1 receptor subtype. Valsartan is chemically described as L-valine, N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.52, and its structural formula is Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan USP. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2. valsartantabstructure

Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2’-(1 H -tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2. Structure Structure

Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow. Valsartan Chemical Structure Hydrochlorothiazide Chemical Structure

Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. valsartan hctz-str

Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. valsartan hydrochlorothiazide

Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow. Valsartan Chemical Structure Hydrochlorothiazide Chemical Structure

Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow. Valsartan Chemical Structure Hydrochlorothiazide Chemical Structure

Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2′-(1 H -tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow. Valsartan Chemical Structure Hydrochlorothiazide Chemical Structure

Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2'-(1 H -tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow 160 mg/12.5 mg: iron oxide red 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow 320 mg/12.5 mg: iron oxide black and iron oxide red 320 mg/25 mg: iron oxide yellow image 2 Image-3

Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2’-(1 H -tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2. Structure Structure

Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2’-(1 H -tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2. Structure Structure

Venlafaxine hydrochloride USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethyl-amino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg venlafaxine. Inactive ingredients consist of cellulose, iron oxide red, iron oxide yellow,lactose monohydrate, magnesium stearate and crospovidone. Structure

Venlafaxine hydrochloride is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethyl-amino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride Venlafaxine hydrochloride, USP is a white to off-white crystalline powder. It is soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Each venlafaxine tablet, USP intended for oral administration contains venlafaxine hydrochloride equivalent to 25 mg or 37.5 mg or 50 mg or 75 mg or 100 mg of venlafaxine. In addition, each tablet contains the following inactive ingredients: ferric oxide red, ferric oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Structured formula for venlafaxine

Venlafaxine hydrochloride USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethyl-amino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg venlafaxine. Inactive ingredients consist of cellulose, iron oxide red, iron oxide yellow,lactose monohydrate, magnesium stearate and crospovidone. Structure

Venlafaxine hydrochloride USP is a structurally novel antidepressant for oral administration. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethyl-amino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Compressed tablets contain venlafaxine hydrochloride USP equivalent to 25 mg, 37.5 mg, 50 mg, 75 mg, or 100 mg venlafaxine. Inactive ingredients consist of cellulose, iron oxide red, iron oxide yellow,lactose monohydrate, magnesium stearate and crospovidone. Structure

Venlafaxine Hydrochloride Extended-Release Capsules USP for oral administration contain venlafaxine hydrochloride, USP a structurally novel antidepressant. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]- p -methoxybenzyl] cyclohexanol hydrochloride. The structural formula is shown below. C 17 H 27 NO 2 •HCl M.W. 313.87 Venlafaxine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine Hydrochloride Extended-Release Capsules USP are formulated as an extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of black iron oxide, dibutyl sebacate, ethylcellulose, gelatin, polyethylene glycol, povidone, propylene glycol, shellac, sugar spheres (which contain sucrose and corn starch), sunset yellow FCF FD&C yellow 6, talc, and titanium dioxide. The 37.5 mg capsules also contain D&C yellow 10 and potassium hydroxide, the 75 mg capsules also contain D&C yellow 10 and may contain potassium hydroxide, and the 150 mg capsules also contain potassium hydroxide. Structural formula for venlafaxing hydrochloride

Venlafaxine hydrochloride extended-release capsules USP are an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated Cyclohexanol,1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.9. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white powder, freely soluble in methanol and water, soluble in anhydrous ethanol and slightly soluble or practically insoluble in acetone. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres and talc. The capsule shells have the following inactive ingredients: iron oxide yellow, iron oxide red, iron oxide black, gelatin and titanium dioxide. The printing ink contains shellac, strong ammonia solution, black iron oxide and potassium hydroxide. FDA approved dissolution specification differs from the USP dissolution specification. venlafaxinestructure

Venlafaxine hydrochloride extended-release capsule USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Venlafaxine Hydrochloride Extended-Release Capsules USP for oral administration contain venlafaxine hydrochloride, USP a structurally novel antidepressant. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]- p -methoxybenzyl] cyclohexanol hydrochloride. The structural formula is shown below. C 17 H 27 NO 2 •HCl M.W. 313.87 Venlafaxine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine Hydrochloride Extended-Release Capsules USP are formulated as an extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of black iron oxide, dibutyl sebacate, ethylcellulose, gelatin, polyethylene glycol, povidone, propylene glycol, shellac, sugar spheres (which contain sucrose and corn starch), sunset yellow FCF FD&C yellow 6, talc, and titanium dioxide. The 37.5 mg capsules also contain D&C yellow 10 and potassium hydroxide, the 75 mg capsules also contain D&C yellow 10 and may contain potassium hydroxide, and the 150 mg capsules also contain potassium hydroxide. Structural formula for venlafaxing hydrochloride

Venlafaxine hydrochloride extended-release capsule USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Venlafaxine Hydrochloride Extended-Release Capsules USP for oral administration contain venlafaxine hydrochloride, USP a structurally novel antidepressant. It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]- p -methoxybenzyl] cyclohexanol hydrochloride. The structural formula is shown below. C 17 H 27 NO 2 •HCl M.W. 313.87 Venlafaxine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine Hydrochloride Extended-Release Capsules USP are formulated as an extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of black iron oxide, dibutyl sebacate, ethylcellulose, gelatin, polyethylene glycol, povidone, propylene glycol, shellac, sugar spheres (which contain sucrose and corn starch), sunset yellow FCF FD&C yellow 6, talc, and titanium dioxide. The 37.5 mg capsules also contain D&C yellow 10 and potassium hydroxide, the 75 mg capsules also contain D&C yellow 10 and may contain potassium hydroxide, and the 150 mg capsules also contain potassium hydroxide. Structural formula for venlafaxing hydrochloride

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Verapamil hydrochloride is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg, or 120 mg of verapamil hydrochloride. The structural formula of verapamil hydrochloride is: Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other cardioactive drugs. Inactive ingredients include anhydrous lactose, corn starch, hypromellose 2910, magnesium stearate, microcrystalline cellulose, polacrilin potassium, and polyethylene glycol 400. In addition the following coloring agents are used: FD&C Yellow No. 6 Aluminum Lake, hydroxypropyl cellulose and titanium dioxide (40 mg light peach); hydroxypropyl cellulose and titanium dioxide (80 mg white and 120 mg white). The structural formula of verapamil hydrochloride

Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below: C 27 H 38 N 2 O 4 ·HCl..........M.W. 491.06 Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. Structure of Verapamil Hydrochloride

Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below: C 27 H 38 N 2 O 4 ·HCl..........M.W. 491.06 Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. Structure of Verapamil Hydrochloride

Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, oval shaped, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: C27H38N2O4 ∙ HCl M.W.=491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 180 mg and 240 mg meet USP Dissolution Test 3. Chemical Structure

Vilazodone hydrochloride tablets for oral administration contain polymorph Form IV vilazodone hydrochloride (HCl), a selective serotonin reuptake inhibitor and a 5HT 1A receptor partial agonist. Vilazodone Hydrochloride is 2-benzofurancarboxamide, 5-[4-[4-(5-cyano-1 H -indol-3-yl)butyl]-1-piperazinyl]-, hydrochloride with a molecular formula of C 26 H 27 N 5 O 2 .HCI. Its molecular weight is 477.99. The structural formula is: Vilazodone hydrochloride tablets are available as 10 mg, 20 mg, and 40 mg film-coated tablets containing 10 mg, 20 mg, and 40 mg of vilazodone HCl, respectively. In addition to the active ingredient, vilazodone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1 Aluminum Lake (40 mg only), Ferric Oxide Red (10 mg only) and FD&C Yellow #6 Aluminum Lake (20 mg only), lactose monohydrate, macrogol (polyethylene glycol), magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc. Structural Formula

Ergocalciferol Capsules, USP are a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D 2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D 2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D 2 is equal to 40 USP Units. Each capsule contains Vitamin D (Ergocalciferol) 1.25 mg equivalent to 50,000 USP Units in an edible vegetable oil. Ergocalciferol, also called vitamin D 2 , is 9,10-secoergosta-5,7,10(19), 22-tetraen-3-ol, (3β,5Z,7E,22 E )-; (C 28 H 44 O) with a molecular weight of 396.65, and has the following structural formula: Inactive Ingredients: 2-Ethoxyethanol, FD&C Blue #1, FD&C Yellow #5, Gelatin, Glycerin, Lecithin, Medium chain triglyceride, Purified water, Shellac glaze (modified) IN SD-45, Simethicone, Soybean oil and Titanium dioxide. Vitamin D structure

Warfarin sodium tablets USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R - and S -enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows: C 19 H 15 NaO 4 M.W. 330.31 Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains FD&C yellow no. 5 (tartrazine) aluminum lake and FD&C red no. 40 aluminum lake. Warfarin Structural Formula

Warfarin sodium, USP is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α- acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following: Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet, USP intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, hydroxypropyl cellulose, starlac and magnesium stearate. Additionally each 1 mg tablet contains: D&C Red #30 aluminum lake 2 mg tablet contains: FD&C Red #40 aluminum lake and FD&C Blue#2 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue#2 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue#2 and FD&C Red # 40 aluminum lake 4 mg tablet contains: FD&C Blue#2 5 mg tablet contains: FD&C Yellow # 6 aluminum lake 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue #2 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake 10 mg tablet is dye free structure

Warfarin sodium tablets USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R - and S -enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows: C 19 H 15 NaO 4 M.W. 330.31 Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains FD&C yellow no. 5 (tartrazine) aluminum lake and FD&C red no. 40 aluminum lake. Warfarin Structural Formula

Ziprasidone is available as ziprasidone hydrochloride capsules for oral administration. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro- 2H -indol-2-one. The molecular formula of C 21 H 21 ClN 4 OS (free base of ziprasidone) represents the following structural formula: Ziprasidone hydrochloride capsules contain a monohydrochloride salt of ziprasidone. Chemically, ziprasidone hydrochloride is 5-[2-[4-(1,2-‑benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro- 2H -indol-2-one, monohydrochloride. The molecular formula is C 21 H 21 ClN 4 OS · HCl and its molecular weight is 449.40. Ziprasidone hydrochloride is an off white to beige brown powder. Ziprasidone hydrochloride capsules are supplied for oral administration in 20 mg (of ziprasidone free base), 40 mg (of ziprasidone free base), 60 mg (of ziprasidone free base), and 80 mg (of ziprasidone free base) capsules. Ziprasidone hydrochloride capsules contain ziprasidone hydrochloride, colloidal silicon dioxide, crospovidone, sodium starch glycolate, and magnesium stearate. Each capsule shell contains the following inactive ingredients: gelatin and titanium dioxide. The 20 mg, 40 mg and 80 mg capsule shells also contain the following inactive ingredients: D&C Red #28, FD&C Blue #1, FD&C Yellow #6. The capsule imprinting ink contains ammonium hydroxide, black iron oxide, ethyl alcohol, isopropyl alcohol, butyl alcohol, potassium hydroxide, propylene glycol and shellac. chemical-structure

Ziprasidone is available as ziprasidone hydrochloride capsules for oral administration. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro- 2H -indol-2-one. The molecular formula of C 21 H 21 ClN 4 OS (free base of ziprasidone) represents the following structural formula: Ziprasidone hydrochloride capsules contain a monohydrochloride salt of ziprasidone. Chemically, ziprasidone hydrochloride is 5-[2-[4-(1,2-‑benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro- 2H -indol-2-one, monohydrochloride. The molecular formula is C 21 H 21 ClN 4 OS · HCl and its molecular weight is 449.40. Ziprasidone hydrochloride is an off white to beige brown powder. Ziprasidone hydrochloride capsules are supplied for oral administration in 20 mg (of ziprasidone free base), 40 mg (of ziprasidone free base), 60 mg (of ziprasidone free base), and 80 mg (of ziprasidone free base) capsules. Ziprasidone hydrochloride capsules contain ziprasidone hydrochloride, colloidal silicon dioxide, crospovidone, sodium starch glycolate, and magnesium stearate. Each capsule shell contains the following inactive ingredients: gelatin and titanium dioxide. The 20 mg, 40 mg and 80 mg capsule shells also contain the following inactive ingredients: D&C Red #28, FD&C Blue #1, FD&C Yellow #6. The capsule imprinting ink contains ammonium hydroxide, black iron oxide, ethyl alcohol, isopropyl alcohol, butyl alcohol, potassium hydroxide, propylene glycol and shellac. chemical-structure

Ziprasidone hydrochloride capsules are available for oral administration. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2 H -indol-2-one. The molecular formula of C 21 H 21 ClN 4 OS (free base of ziprasidone) represents the following structural formula: Ziprasidone hydrochloride capsules contain a monohydrochloride, anhydrous salt of ziprasidone. Chemically, ziprasidone hydrochloride anhydrous is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2 H -indol-2-one, monohydrochloride, anhydrous. The molecular formula is C 21 H 21 ClN 4 OS · HCl and its molecular weight is 449.4. Ziprasidone hydrochloride anhydrous is a light pink to dark pink colored powder. Ziprasidone hydrochloride capsules are supplied for oral administration in 20 mg (yellow/blue), 40 mg (blue/blue), 60 mg (yellow/yellow), and 80 mg (yellow/blue) capsules. Ziprasidone hydrochloride capsule, intended for oral administration, contains ziprasidone hydrochloride anhydrous equivalent to 20 mg, 40 mg, 60 mg or 80 mg of ziprasidone. In addition, each capsule contains the following inactive ingredients: calcium silicate, citric acid, lactose anhydrous, magnesium stearate and pregelatinized starch. The capsule shell for the 20 mg and 80 mg strengths consists of carboxymethylcellulose, FD&C blue # 2, gelatin, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The capsule is printed with edible black pharmaceutical ink. The capsule shell for the 40 mg strength consists of FD&C blue # 2, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule is printed with edible white pharmaceutical ink. The capsule shell for the 60 mg strength consists of carboxymethylcellulose, gelatin, iron oxide yellow, sodium lauryl sulfate and titanium dioxide. The capsule is printed with edible black pharmaceutical ink. The black ink is comprised of iron oxide black, potassium hydroxide, propylene glycol, shellac and ammonia solution. The white ink is comprised of povidone, propylene glycol, sodium hydroxide, shellac and titanium dioxide. structural formula

Zolpidem Tartrate Tablets contains Zolpidem tartrate, a gamma-aminobutyric acid (GABA) A receptor positive modulator of the imidazopyridine class. Zolpidem Tartrate Tablets is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, Zolpidem is N, N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem Tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each Zolpidem Tartrate Tablet includes the following inactive ingredients: lactose anhydrous, sodium starch glycolate, colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate. The 10 mg tablets also contain Opadry II (white) and the 5 mg tablets contain Opadry II (pink). Opadry II (white) contains hypromellose, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin. Opadry II (pink) contains hypromellose, FD&C Red no. 40 aluminum lake, FD&C Blue no. 2 aluminum lake, FD&C Yellow no. 6 aluminum lake, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin. Image

Zolpidem tartrate extended-release tablets USP contains zolpidem tartrate, a gamma-aminobutyric acid (GABA) A receptor positive modulator of the imidazopyridine class. Zolpidem tartrate extended-release tablets USP are available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate is a white or almost white, crystalline powder, hygroscopic that is slightly soluble in water, sparingly soluble in methanol and practically insoluble in methylene chloride. It has a molecular weight of 764.87. Zolpidem tartrate extended-release tablets USP consist of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg zolpidem tartrate extended-release tablets USP contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue # 2 aluminium lake, hypromellose, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate and titanium dioxide. The 12.5 mg zolpidem tartrate extended-release tablets USP contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue # 2 aluminium lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate and titanium dioxide. Zolpidem tartrate extended-release tablets USP meets USP Dissolution Test 6. Zolpidem Tartrate

Zolpidem tartrate is a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet, USP includes the following inactive ingredients: hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, polyethylene glycol, sodium starch glycolate, titanium dioxide and ferric oxide red; the 10 mg tablet also contains ferric oxide yellow. Image 1

Zolpidem tartrate is a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet, USP includes the following inactive ingredients: hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, polyethylene glycol, sodium starch glycolate, titanium dioxide and ferric oxide red; the 10 mg tablet also contains ferric oxide yellow. Image 1

Zolpidem tartrate tablets USP are a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem tartrate, USP is N , N ,6-Trimethyl-2- p -tolylimidazo[1,2-α]pyridine-3-acetamide L-(+)-tartrate. It has the following structure: (C 19 H 21 N 3 O) 2 •C 4 H 6 O 6 M.W. 764.87 Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. Each zolpidem tartrate tablet USP includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide; the 5 mg tablet also contains iron oxide red. Structural formula for zolpidem tartrate

Zolpidem tartrate extended-release tablet, USP contains zolpidem tartrate, a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class. Zolpidem tartrate extended-release tablets are available in 6.25 mg and 12.5 mg strengths for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Zolpidem tartrate extended-release tablet, USP is available for oral administration as a film-coated tablet containing 6.25 mg and 12.5 mg of zolpidem tartrate. Inactive ingredients consist of colloidal silicon dioxide, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, polyethylene glycol, red ferric oxide, talc, and titanium dioxide. USP Dissolution test 4 used. Chemical Structure

Zolpidem Tartrate Extended-Release Tablets contain zolpidem tartrate, a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class. Zolpidem Tartrate Extended-Release Tablets are available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Zolpidem Tartrate Extended-Release Tablet consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Zolpidem Tartrate Extended-Release tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Zolpidem Tartrate Extended-Release tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide. Chemical Structure

Zolpidem tartrate is a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure: Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet contains either 5 mg or 10 mg zolpidem tartrate with the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, povidone, magnesium stearate, hypromellose, hydroxypropyl cellulose, polyethylene glycol, talc, titanium dioxide, carnauba wax; the 10-mg tablet also contains ferric oxide. Chemical Structure

Zolpidem tartrate tablets USP are a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem tartrate, USP is N , N ,6-Trimethyl-2- p -tolylimidazo[1,2-α]pyridine-3-acetamide L-(+)-tartrate. It has the following structure: (C 19 H 21 N 3 O) 2 •C 4 H 6 O 6 M.W. 764.87 Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. Each zolpidem tartrate tablet USP includes the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, and titanium dioxide; the 5 mg tablet also contains iron oxide red. Structural formula for zolpidem tartrate

Zonisamide Capsules USP, are an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide, 1,2 -benzisoxazole-3-methanesulfonamide. The empirical formula is C 8 H 8 N 2 O 3 S with a molecular weight of 212.23. Zonisamide is a white to off white powder, pKa = 10.6, and is freely soluble in dimethyl formamide, soluble in methanol. The chemical structure is: Zonisamide Capsules USP, are supplied for oral administration as capsules containing 100 mg zonisamide. Each capsule contains the labeled amount of zonisamide plus the following inactive ingredients: hydrogenated vegetable oil, microcrystalline cellulose, colloidal silicon dioxide, sodium lauryl sulfate, gelatin and titanium dioxide. Additionally the 50 mg contains D&C Red No. 28 and FD&C Blue No. 1 and the 100 mg contains FD&C Red No. 40. The black imprinting ink contains shellac, propylene glycol, black iron oxide and potassium hydroxide. Image

Zonisamide USP is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide USP, 1,2 benzisoxazole-3-methanesulfonamide. The empirical formula is C 8 H 8 N 2 O 3 S with a molecular weight of 212.23. Zonisamide USP is a white powder, pK a = 10.2, and is moderately soluble in water (0.80 mg/mL) and 0.1 N HCl (0.50 mg/mL). The chemical structure is: Zonisamide USP is supplied for oral administration as capsules containing 25 mg, 50 mg or 100 mg zonisamide USP. Each capsule contains the labeled amount of zonisamide USP plus the following inactive ingredients: microcrystalline cellulose, hydrogenated vegetable oil, and sodium lauryl sulfate. The printed capsule shell of the different strengths is made from the following ingredients: 25 mg – D&C Red #28, FD&C Blue #1, gelatin and titanium dioxide 50 mg – D&C Yellow #10, FD&C Blue #1, FD&C Red #40, gelatin and titanium dioxide 100 mg - D&C Yellow #10, FD&C Blue #1, FD&C Yellow #6, gelatin and titanium dioxide The dyes used in the printing ink are FD&C Blue #1, FD&C Blue #2, FD&C Red #40, D&C Yellow #10 aluminium lake and iron oxide black. Additionally, the printing ink also contains n-butyl alcohol, ethanol, propylene glycol and shellac. Chemical Formula of Zonisamide

Zonisamide is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide, 1,2-benzisoxazole-3-methanesulfonamide. The molecular formula is C 8 H 8 N 2 O 3 S with a molecular weight of 212.23. Zonisamide is a white powder, pKa = 10.2, and is moderately soluble in water (0.8 mg/mL) and 0.1 N HCl (0.5 mg/mL). The chemical structure is: Zonisamide is supplied for oral administration as capsules containing 25 mg, 50 mg or 100 mg zonisamide, USP. Each capsule contains the labeled amount of zonisamide plus the following inactive ingredients: microcrystalline cellulose, hydrogenated vegetable oil, gelatin, and titanium dioxide. In addition, individual empty hard gelatin capsule shell contains: 50 mg : Black iron oxide. 100 mg : FD&C Blue #1 and FD&C Red #40. The imprinting ink contains black iron oxide, shellac glaze, propylene glycol and also contains either FD & C Blue No. 2, FD & C Red No. 40, FD & C Blue No. 1 and D & C Yellow No.10 or strong ammonia solution and potassium hydroxide. spl-zonisamide-structure