preferred pharmaceuticals inc. - Medication Listings

Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O- isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide. Image

Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O- isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide. Image

Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O- isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide. Image

Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate capsules, USP are available as 15 mg, 25 mg and 50 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate, USP is a white to off-white crystalline powder with bitter taste. It is freely soluble in dichloromethane. Topiramate has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Each topiramate tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 200 mg of topiramate. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Each topiramate capsule, USP intended for oral administration contains 15 mg or 25 mg or 50 mg of topiramate. In addition, each capsule contains the following inactive ingredients: cellulose acetate, gelatin, hypromellose, povidone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and water. Each capsule is printed with black pharmaceutical ink and contains the following inactive ingredients: shellac, propylene glycol, black iron oxide and potassium hydroxide. Topiramate Capsules, USP meet USP dissolution test 2. Structured product formula for Topiramate

Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate capsules, USP are available as 15 mg, 25 mg and 50 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate, USP is a white to off-white crystalline powder with bitter taste. It is freely soluble in dichloromethane. Topiramate has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Each topiramate tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 200 mg of topiramate. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Each topiramate capsule, USP intended for oral administration contains 15 mg or 25 mg or 50 mg of topiramate. In addition, each capsule contains the following inactive ingredients: cellulose acetate, gelatin, hypromellose, povidone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and water. Each capsule is printed with black pharmaceutical ink and contains the following inactive ingredients: shellac, propylene glycol, black iron oxide and potassium hydroxide. Topiramate Capsules, USP meet USP dissolution test 2. Structured product formula for Topiramate

Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O- isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide. Image

Tramadol hydrochloride and acetaminophen tablets, USP combines two analgesics, tramadol hydrochloride, USP and opioid agonist, and acetaminophen, USP. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is: The molecular weight of tramadol hydrochloride, USP is 299.84. Tramadol hydrochloride, USP is a white, bitter, crystalline, and odorless powder. The chemical name for acetaminophen, USP is N-acetyl-p-aminophenol. Its structural formula is: The molecular weight of acetaminophen, USP is 151.17. Acetaminophen, USP is an analgesic and antipyretic agent which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Tramadol hydrochloride and acetaminophen tablets, USP contain 37.5 mg of tramadol hydrochloride, USP and 325 mg acetaminophen, USP and are beige in color. Inactive ingredients in the tablet are carnauba wax, crospovidone, iron oxide black, iron oxide red, iron oxide yellow, microcrystalline cellulose, pregelatinized corn starch, polyethylene glycol, polyvinyl alcohol, povidone, sodium starch glycolate, stearic acid, talc and titanium dioxide. Meets USP Dissolution Test 2. 1 1

Tretinoin Cream USP, 0.025% is used for the topical treatment of acne vulgaris. Tretinoin cream contains tretinoin in 0.025% by weight, in a hydrophilic cream vehicle of butylated hydroxytoluene, isopropyl myristate, polyoxyl stearate type II, purified water, sorbic acid, stearic acid, stearyl alcohol and xanthan gum. Chemically, tretinoin is all-trans -retinoic acid and has the following structure: Chemical Structure

Tretinoin Gel, USP and Tretinoin Cream, USP are used for the topical treatment of acne vulgaris. Each gram of tretinoin gel contains tretinoin in either of two strengths, 0.025% (0.25 mg) or 0.01% (0.1 mg) in a gel vehicle of hydroxypropyl cellulose, butylated hydroxytoluene, and alcohol 90% w/w. Each gram of tretinoin cream contains tretinoin in either of three strengths, 0.1% (1 mg), 0.05% (0.5 mg), or 0.025% (0.25 mg) in a hydrophilic cream vehicle of: stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans -retinoic acid. It has a molecular weight of 300.44 and has the following structural formula: chemical-structure-tretinoin.jpg

Triamcinolone Acetonide Dental Paste USP, 0.1%, contains the corticosteroid triamcinolone acetonide in an adhesive vehicle suitable for application to oral tissues. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The structural formula of triamcinolone acetonide is as follows: C 24 H 31 FO 6 MW 434.50 Each gram of triamcinolone acetonide dental paste contains 1 mg triamcinolone acetonide in an emollient dental paste containing carboxymethylcellulose sodium, gelatin, and pectin in a plasticized hydrocarbon gel (a polyethylene and mineral oil gel base). Chemical Structure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1, 4-diene-3, 20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis- (oxy)]-, (11β,16α)-], with the empirical formula C 24 H 31 FO 6 and molecular weight 434.50. CAS 76-25-5. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11ß,16α)-. C 24 H 31 FO 6 , and M.W. of 434.51; CAS Reg. No. 76-25-5. Each gram of 0.025%, 0.1% and 0.5% Triamcinolone Acetonide Cream USP contains 0.25 mg, 1 mg, or 5 mg triamcinolone acetonide respectively, in a washable cream base of cetyl alcohol, cetyl esters wax, glycerin, glyceryl monostearate, isopropyl palmitate, polysorbate-60, propylene glycol, purified water, sorbic acid, and sorbitan monostearate. Structural Formula

Triamcinolone Acetonide Dental Paste, USP 0.1%, contains the corticosteroid triamcinolone acetonide in an adhesive vehicle suitable for application to oral tissues. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with acetone. The structural formula of triamcinolone acetonide is as follows: Each gram of triamcinolone acetonide dental paste contains 1 mg triamcinolone acetonide in an emollient dental paste containing gelatin, pectin, and carboxymethylcellulose sodium in a plasticized hydrocarbon gel (a polyethylene and mineral oil gel base). Triamcinolone Acetonide Dental Paste-1

Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis- (oxy)]-, (11β,16α)-], with the empirical formula C 24 H 31 FO 6 and molecular weight 434.50. CAS 76-25-5. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. chemstructure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Chemically triamcinolone acetonide is pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene) bis(oxy)]-(11β16α) Its structural formula is: Each gram of Triamcinolone Acetonide Cream USP, 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triamcinolone Acetonide Cream USP, 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triamcinolone Acetonide Cream USP, 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Structure

Triamcinolone Acetonide Dental Paste USP, 0.1% contains the corticosteroid triamcinolone acetonide in an adhesive vehicle suitable for application to oral tissues. Triamcinolone acetonide is designated chemically as 9-fluoro-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16,17-acetal with acetone. The structural formula of triamcinolone acetonide is as follows: Each gram of Triamcinolone Acetonide Dental Paste USP, 0.1% contains 1 mg triamcinolone acetonide in a dental paste containing gelatin, pectin, cream flavor, vanilla flavor and carboxymethylcellulose sodium in Plasticized Hydrocarbon Gel, a polyethylene and mineral oil gel base. LABEL

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream, USP contains Triamcinolone Acetonide [Pregna- 1,4- diene -3,20- dione,9-fluoro-11,21- dihydroxy-16,17- [(1- methylethylidene)bis-(oxy)]-, (11β,16α)-], with the empirical formula C 24 H 31 FO 6 and molecular weight 434.50. CAS 76-25-5. Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of triamcinolone acetonide per gram in a base containing emulsifying wax, cetyl alcohol, isopropyl palmitate, sorbitol solution, glycerin, lactic acid, benzyl alcohol and purified water. chemical structure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide is designated chemically as 9-Fluoro-11β, 16α, 17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. C24H31FO6, Molecular Weight: 434.50 Each gram of 0.1% triamcinolone acetonide cream provides 1 mg triamcinolone acetonide, respectively, in a vanishing cream base containing cetyl alcohol, cetyl esters wax, glyceryl monostearate, isopropyl palmitate, polysorbate-60, polysorbate-80, propylene glycol and purified water. Chemical Structure

Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis- (oxy)]-, (11β,16α)-], with the empirical formula C 24 H 31 FO 6 and molecular weight 434.50. CAS 76-25-5. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water. chemstructure

The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Chemically triamcinolone acetonide is pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene) bis(oxy)]-(11β16α) Its structural formula is: Each gram of Triamcinolone Acetonide Cream USP, 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triamcinolone Acetonide Cream USP, 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triamcinolone Acetonide Cream USP, 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Structure

Tri-Sprintec ® (norgestimate and ethinyl estradiol tablets USP) is a combination oral contraceptive containing the progestational compound norgestimate, USP and the estrogenic compound ethinyl estradiol, USP. Norgestimate, USP is designated as (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-, oxime, (17α)-(+)-) and ethinyl estradiol, USP is designated as (19-Nor-17α-pregna,1,3,5(10)-trien-20-yne-3, 17-diol). Each active gray tablet contains 0.18 mg norgestimate, USP and 0.035 mg ethinyl estradiol, USP. Inactive ingredients include anhydrous lactose, lactose monohydrate, lake blend black LB 636 (which consists of FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, and FD&C Yellow No. 6 Aluminum Lake), magnesium stearate, and pregelatinized corn starch. Each active light blue tablet contains 0.215 mg norgestimate, USP and 0.035 mg ethinyl estradiol, USP. Inactive ingredients include anhydrous lactose, FD&C Blue No. 2 Aluminum Lake, lactose monohydrate, magnesium stearate, and pregelatinized corn starch. Each active blue tablet contains 0.25 mg norgestimate, USP and 0.035 mg ethinyl estradiol, USP. Inactive ingredients include anhydrous lactose, FD&C Blue No. 2 Aluminum Lake, lactose monohydrate, magnesium stearate, and pregelatinized corn starch. Each white placebo tablet contains only inert ingredients as follows: anhydrous lactose, hypromellose, magnesium stearate, and microcrystalline cellulose. The structural formulas are as follows: C 23 H 31 NO 3 M.W. 369.50 C 20 H 24 O 2 M.W. 296.40 Norgestimate Structure EE Structure

Trubrexa TM Transdermal Patch is comprised of an adhesive material containing 4.75% lidocaine and 0.025% capsaicin. Each patch is 2 in x 2 in (5.08 cm x 5.08 cm) and consists of an adhesive side containing the active/inactive ingredients and an outer surface backing layer with breathable fabric. The adhesive side is covered with a removable, clear, unprinted, plastic film. The outer surface of the backing layer is imprinted with the Trubrexa TM Transdermal Patch logo. 4 patches are included in each pouch bag. The inactive ingredients include: Arnica, Magnesium, Polyacrylate, Vegan Glycerol, and Water. Trubrexa TM Transdermal Patch is Latex Free, Paraben Free, and Vegan.

Valacyclovir hydrochloride is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556.0 mg or 1.112 grams of valacyclovir hydrochloride USP equivalent to 500 mg or 1 gm of valacyclovir, respectively, and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L -valine2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula: Valacyclovir hydrochloride USP (monohydrate) is a white or almost white powder with the molecular formula C 13 H 23 N 6 O 5 Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. FDA approved dissolution test specifications differ from USP. Structure

Valacyclovir Tablets, USP is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir Tablets, USP are for oral administration. Each tablet contains 556.2 mg or 1.112 grams of valacyclovir hydrochloride equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, FD&C blue #2, hypromellose, magnesium stearate, polyethylene glycol 400, polysorbate 80, povidone K90, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Valacyclovir hydrochloride is a white to off-white powder with the molecular formula C 13 H 20 N 6 O 4 ∙HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43. Chemical Structure

Valacyclovir hydrochloride is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C 13 H 20 N 6 O 4 •HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk a s for valacyclovir hydrochloride are 1.90, 7.47, and 9.43. Chemical Structure

Valacyclovir hydrochloride is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556.2 mg or 1.112 grams of valacyclovir hydrochloride, USP (hydrous), which are equivalent to 500 mg or 1 gram of valacyclovir, on the anhydrous basis, respectively, and the inactive ingredients hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. The white, film-coated tablets are printed with edible black ink which contains black iron oxide, propylene glycol and shellac glaze. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Valacyclovir hydrochloride, USP (hydrous) is a white to off-white powder with the molecular formula C 13 H 20 N 6 O 4 •HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk a s for valacyclovir hydrochloride are 7.47 and 9.43. Meets USP Dissolution Test 2. Valacyclovir Hydrochloride Structural Formula

Valacyclovir hydrochloride is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C 13 H 20 N 6 O 4 •HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk a s for valacyclovir hydrochloride are 1.90, 7.47, and 9.43. Chemical Structure

Valacyclovir hydrochloride USP is the hydrochloride salt of the L -valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue #2, hydrogenated castor oil, hypromellose, polyethylene glycol, polysorbate 80, starch (corn), and titanium dioxide. The chemical name of valacyclovir hydrochloride is L -valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H -purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula: Image Valacyclovir hydrochloride USP is a white to off-white powder with the molecular formula C 13 H 20 N 6 O 4 •HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk a s for valacyclovir hydrochloride are 1.90, 7.47, and 9.43. 1

Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2'-(1 H -tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.5, and its structural formula is: Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n -butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.73, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg, and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, talc, titanium dioxide, and macrogol/peg 3350. Additionally the 80/12.5 mg, 160/25 mg and 320/25 mg strengths contain iron oxide red, FD&C blue #2 aluminum lake. The 160/12.5 mg and 320/12.5 mg strengths contain FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, FD&C blue #1 aluminum lake. C:\Users\RA\Desktop\5.jpg C:\Users\RA\Desktop\6.jpg

Venlafaxine Hydrochloride Extended-Release Capsules, USP are an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride is a white to off-white crystalline solid, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of empty hard gelatin capsules, ethylcellulose, hypromellose, povidone, sugar spheres (composed of corn starch and sucrose) and talc. The 37.5 mg capsule shell contains red iron oxide, gelatin, and titanium dioxide. The 75 mg capsule shell contains black iron oxide, red iron oxide, gelatin, and titanium dioxide. The 150 mg capsule shell contains FD&C blue 1, FD&C red 3, FD&C yellow 6, gelatin, and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution test specifications differ from USP. image-01

Venlafaxine hydrochloride extended-release capsule USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated Cyclohexanol,1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.9. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white powder, freely soluble in methanol and water, soluble in anhydrous ethanol and slightly soluble or practically insoluble in acetone. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres and talc. The capsule shells have the following inactive ingredients: iron oxide yellow, iron oxide red, iron oxide black, gelatin and titanium dioxide. The printing Ink contains shellac, strong ammonia solution, black iron oxide and potassium hydroxide. Meets USP Dissolution Test-10. venlafaxinestructure

Venlafaxine extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride USP, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated 1-[(1 RS )-2-Dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.9. The structural formula is shown below. Venlafaxine hydrochloride is a white or almost white powder freely soluble in methanol and water; soluble in anhydrous ethanol and slightly soluble or practically insoluble in acetone. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine extended-release tablets are formulated as extended-release tablet for once-a-day oral administration. Venlafaxine extended-release tablets use osmotic pressure to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system, which resembles a conventional tablet in appearance, comprises an osmotically active core surrounded by a semipermeable membrane. The unitary tablet core is composed of the drug and excipients (including the osmotically active components). There is a precision-laser drilled orifice in the semipermeable membrane on the side of the tablet. In an aqueous environment, such as the gastrointestinal tract, water permeates through the membrane into the tablet core, causing the drug to dissolve and the osmotic components to expand. This expansion pushes the drug out through the orifice. The semipermeable membrane controls the rate at which water permeates into the tablet core, which in turn controls the rate of drug delivery. The controlled rate of drug delivery into the gastrointestinal lumen is thus independent of pH or gastrointestinal motility. The function of venlafaxine extended-release tablets depends on the existence of an osmotic gradient between the contents of the core and the fluid in the gastrointestinal tract. Since the osmotic gradient remains constant, drug delivery remains essentially constant. The biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell. Each extended-release tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of cellulose acetate, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, mannitol, microcrystalline cellulose, opacode black ink (S-1-277001) (ferrosoferric oxide, propylene glycol and shellac), opadry white 03L580003 (hypromellose, propylene glycol, titanium dioxide and triacetin), polyethylene glycol, povidone. venlafaxine-struct

Venlafaxine hydrochloride extended-release capsules, USP for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride, USP is a white to off-white crystalline solid, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hydroxypropyl methylcellulose, sugar spheres and talc. The empty capsule shells contain ferric oxide red, gelatin, sodium lauryl sulphate and titanium dioxide. In addition, the 37.5 mg empty capsule shells contain ferric oxide black, and 150 mg empty capsule shells contain ferric oxide yellow. Capsules imprinting ink contains povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. In addition, red imprinting ink used in 37.5 mg and 75 mg capsules contain FD & C Red#40 aluminium lake. FDA approved dissolution test specifications differ from USP structure

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Venlafaxine Hydrochloride Extended-Release Capsules, USP are an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride is a white to off-white crystalline solid, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol: water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of empty hard gelatin capsules, ethylcellulose, hypromellose, povidone, sugar spheres (composed of corn starch and sucrose) and talc. The 37.5 mg capsule shell contains red iron oxide, gelatin, and titanium dioxide. The 75 mg capsule shell contains black iron oxide, red iron oxide, gelatin, and titanium dioxide. The 150 mg capsule shell contains FD&C blue 1, FD&C red 3, FD&C yellow 6, gelatin, and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution test specifications differ from USP. image-01

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, cetostearyl alcohol, gelatin, hypromellose, microcrystalline cellulose, polyacrylate dispersion, sodium lauryl sulfate, talc and titanium dioxide. Additionally each 37.5 mg capsule shell contains black iron oxide and each 75 mg and 150 mg capsule shell contains red iron oxide. The capsule is printed with black pharmaceutical ink which contains black iron oxide as coloring agent. The product complies with USP dissolution test 7. Image

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride USP a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-‑methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white crystalline powder, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres, and talc. The empty hard gelatin capsule shells contain iron oxide red, gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 37.5 mg empty hard gelatin capsule shells contain iron oxide black. The capsules are printed with edible ink containing black iron oxide and shellac. Meets the USP Dissolution Test - 4 Chemical Structure

Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows: Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. FDA approved dissolution test specifications differ from USP. Image

Venlafaxine hydrochloride extended-release capsule USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated Cyclohexanol,1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.9. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white powder, freely soluble in methanol and water, soluble in anhydrous ethanol and slightly soluble or practically insoluble in acetone. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres and talc. The capsule shells have the following inactive ingredients: iron oxide yellow, iron oxide red, iron oxide black, gelatin and titanium dioxide. The printing Ink contains shellac, strong ammonia solution, black iron oxide and potassium hydroxide. Meets USP Dissolution Test-10. venlafaxinestructure

Venlafaxine hydrochloride extended-release capsule USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated Cyclohexanol,1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl]cyclohexanol hydrochloride and has the empirical formula of C 17 H 27 NO 2 HCl. Its molecular weight is 313.9. The structural formula is shown as follows: Venlafaxine hydrochloride USP is a white or almost white powder, freely soluble in methanol and water, soluble in anhydrous ethanol and slightly soluble or practically insoluble in acetone. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of ethyl cellulose, hypromellose, sugar spheres and talc. The capsule shells have the following inactive ingredients: iron oxide yellow, iron oxide red, iron oxide black, gelatin and titanium dioxide. The printing Ink contains shellac, strong ammonia solution, black iron oxide and potassium hydroxide. Meets USP Dissolution Test-10. venlafaxinestructure

Verapamil Hydrochloride Extended-Release Tablets, USP are calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil Hydrochloride Extended-Release Tablets, USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride, USP (equivalent to 111.08 mg verapamil free base), as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride, USP (equivalent to 166.62 mg verapamil free base), and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride, USP (equivalent to 222.16 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl, USP is given below: C 27 H 38 N 2 O 4 ·HCl M.W. 491.06 g/mol Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)-ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. Verapamil HCl, USP is not chemically related to other cardio active drugs. In addition to verapamil HCl, USP, the Verapamil Hydrochloride Extended-Release Tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium alginate, and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil Hydrochloride Extended-Release Tablets, USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. structure

Verapamil hydrochloride extended-release tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets, USP is available for oral administration as light blue, capsule shaped, bevelled edged, scored, film coated tablets containing 240 mg of verapamil hydrochloride USP; as light blue, oval shaped, scored, film coated tablets containing 180 mg of verapamil hydrochloride USP; and light blue, oval shaped, film coated tablets containing 120 mg of verapamil hydrochloride USP (equivalent to 111.08 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is: Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl, USP is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinylpyrrolidone, sodium alginate, and film coating contains FD&C Blue No. 1 Brilliant Blue FCF aluminum lake, hypromellose, iron oxide yellow, titanium dioxide and triacetin. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 3. structure.jpg

Verapamil Hydrochloride Extended-Release Tablets, USP are calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist). Verapamil Hydrochloride Extended-Release Tablets, USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride, USP (equivalent to 111.08 mg verapamil free base), as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride, USP (equivalent to 166.62 mg verapamil free base), and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride, USP (equivalent to 222.16 mg verapamil free base). The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl, USP is given below: C 27 H 38 N 2 O 4 ·HCl M.W. 491.06 g/mol Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)-ethyl]methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl, USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, freely soluble in chloroform, sparingly soluble in alcohol and practically insoluble in ether. Verapamil HCl, USP is not chemically related to other cardio active drugs. In addition to verapamil HCl, USP, the Verapamil Hydrochloride Extended-Release Tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium alginate, and titanium dioxide. The following are the color additives per tablet strength: Strength (mg) Color Additive(s) 120 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 180 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black 240 Ferric Oxide Yellow, Ferric Oxide Red and Ferric Oxide Black Verapamil Hydrochloride Extended-Release Tablets, USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1. structure

Verapamil hydrochloride (verapamil HCl) tablets, USP is a calcium ion influx inhibitor (slow-channel blocker or calcium ion antagonist) available for oral administration in film-coated tablets containing 40 mg, 80 mg or 120 mg of verapamil hydrochloride. The structural formula of verapamil HCl is: C 27 H 38 N 2 O 4 • HCl M.W. = 491.08 Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride Verapamil HCl is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil HCl is not chemically related to other cardioactive drugs. Inactive ingredients include colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, light mineral oil, sodium lauryl sulfate, titanium dioxide and hypromellose. Image

Vilazodone hydrochloride tablets for oral administration contain polymorph Form IV vilazodone hydrochloride (HCl), a selective serotonin reuptake inhibitor and a 5HT1A receptor partial agonist. Vilazodone Hydrochloride is 2-benzofurancarboxamide, 5-[4-[4-(5-cyano-1H-indol-3-yl)butyl]-1-piperazinyl]-, hydrochloride with a molecular formula of C 26 H 27 N 5 O 2 .HCl. Its molecular weight is 479.99 g/mol. The structural formula is: Vilazodone hydrochloride tablets are available as 10 mg, 20 mg, and 40 mg film-coated tablets containing 10 mg, 20 mg, and 40 mg of vilazodone HCl, respectively. In addition to the active ingredient, vilazodone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1 Aluminum Lake (40 mg only), Ferric Oxide Red (10 mg only) and FD&C Yellow #6 Aluminum Lake (20 mg only), lactose monohydrate, macrogol (polyethylene glycol), magnesium stearate, microcrystalline cellulose, opadry II blue (for 40 mg), opadry II pink (for 10 mg) and opadry II orange (for 20 mg), polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc. vilazodone-str

Ergocalciferol Capsules, USP are a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D 2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D 2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D 2 is equal to 40 USP Units. Each capsule contains Vitamin D (Ergocalciferol) 1.25 mg equivalent to 50,000 USP Units in an edible vegetable oil. Ergocalciferol, also called vitamin D 2 , is 9,10-secoergosta-5,7,10(19), 22-tetraen-3-ol, (3β,5Z,7E,22 E )-; (C 28 H 44 O) with a molecular weight of 396.65, and has the following structural formula: Inactive Ingredients : FD&C Blue #1, FD&C Yellow #5, Gelatin, Glycerin, Lecithin, Medium chain triglyceride, Purified water, Shellac glaze, N-Butyl alcohol, Simethicone, Soybean oil and Titanium dioxide. Vitamin D structure

Warfarin sodium, USP is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α- acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following: Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet, USP intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, hydroxypropyl cellulose, starlac and magnesium stearate. Additionally each 1 mg tablet contains: D&C Red #30 aluminum lake 2 mg tablet contains: FD&C Red #40 aluminum lake and FD&C Blue#2 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue#2 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue#2 and FD&C Red # 40 aluminum lake 4 mg tablet contains: FD&C Blue#2 5 mg tablet contains: FD&C Yellow # 6 aluminum lake 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue #2 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake 10 mg tablet is dye free structure

Warfarin sodium, USP is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α- acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following: Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet, USP intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, hydroxypropyl cellulose, starlac and magnesium stearate. Additionally each 1 mg tablet contains: D&C Red #30 aluminum lake 2 mg tablet contains: FD&C Red #40 aluminum lake and FD&C Blue#2 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue#2 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue#2 and FD&C Red # 40 aluminum lake 4 mg tablet contains: FD&C Blue#2 5 mg tablet contains: FD&C Yellow # 6 aluminum lake 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue #2 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake 10 mg tablet is dye free structure

Warfarin sodium, USP is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α- acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following: Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each warfarin sodium tablet, USP intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients lactose monohydrate, starch, pregelatinised starch, hydroxypropyl cellulose, starlac and magnesium stearate. Additionally each 1 mg tablet contains: D&C Red #30 aluminum lake 2 mg tablet contains: FD&C Red #40 aluminum lake and FD&C Blue#2 2.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Blue#2 3 mg tablet contains: FD&C Yellow # 6 aluminum lake, FD&C Blue#2 and FD&C Red # 40 aluminum lake 4 mg tablet contains: FD&C Blue#2 5 mg tablet contains: FD&C Yellow # 6 aluminum lake 6 mg tablet contains: FD&C Yellow # 6 aluminum lake and FD&C Blue #2 7.5 mg tablet contains: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake 10 mg tablet is dye free structure