preferred pharmaceuticals, inc. - Medication Listings

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 •H 2 O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 •H 2 O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 •H 2 O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine sodium tablets, USP are L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has a molecular formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, and purified water. Each tablet strength meets USP Dissolution Test 2. Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets, USP Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake* 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 Carmine 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 2 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake * Note – FD&C Yellow No. 6 is orange in color. 1

Levothyroxine sodium tablets, USP are L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has a molecular formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients croscarmellose sodium, magnesium stearate, microcrystalline cellulose, and purified water. Each tablet strength meets USP Dissolution Test 2. Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets, USP Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake* 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 Carmine 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 2 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake * Note – FD&C Yellow No. 6 is orange in color. 1

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine Sodium Tablets contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'- tetraiodothyronine in sodium salt form. Synthetic T4 is identical in chemical structure to the T 4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 ∙ x H 2 O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylatedhydroxy toluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 6 provides a listing of the color additives by tablet strength: Table 6. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake levothyroxine-structure

Levothyroxine sodium tablets USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5' tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 •H 2 O, molecular weight of 798.85 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablets USP contains the inactive ingredients corn starch, croscarmellose sodium, magnesium stearate, mannitol and sodium bicarbonate. Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets USP Color Additives Levothyroxine sodium tablet USP meets USP Dissolution Test 2. Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake* 50 FD&C Blue 1 Aluminum Lake 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake 100 FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 112 D&C Red No. 27 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake *Note – FD&C Yellow No. 6 Aluminum Lake is peach in color. image-1

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each Levothyroxine sodium tablets, USP contains the inactive ingredients croscarmellose sodium, microcrystalline cellulose, silicon dioxide and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9: Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD & C Yellow No. 6 Aluminium Lake* 50 None 75 FD & C Red No. 40 Aluminium Lake FD & C Blue No. 2 Aluminium Lake 88 FD & C Yellow No. 6 Aluminium Lake* FD & C Blue No. 1 Aluminium Lake 100 FD & C Yellow No. 6 Aluminium Lake* D & C Yellow No. 10 Lake 112 FD & C Red No. 40 Aluminium Lake 125 FD & C Yellow No. 6 Aluminium Lake* FD & C Red No. 40 Aluminium Lake FD & C Blue No. 1 Aluminium Lake 137 FD & C Blue No. 1 Aluminium Lake 150 FD & C Blue No. 2 Aluminium Lake 175 FD & C Red No. 40 Aluminium Lake FD & C Blue No. 2 Aluminium Lake 200 FD & C Red No. 40 Aluminium Lake 300 FD & C Yellow No. 6 Aluminium Lake* FD & C Blue No. 1 Aluminium Lake D & C Yellow No. 10 Lake * Note - FD&C Yellow No. 6 is orange in color. Levothyroxine Sodium Tablet, USP meets USP Dissolution Test 2. str

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each Levothyroxine sodium tablets, USP contains the inactive ingredients croscarmellose sodium, microcrystalline cellulose, silicon dioxide and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9: Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD & C Yellow No. 6 Aluminium Lake* 50 None 75 FD & C Red No. 40 Aluminium Lake FD & C Blue No. 2 Aluminium Lake 88 FD & C Yellow No. 6 Aluminium Lake* FD & C Blue No. 1 Aluminium Lake 100 FD & C Yellow No. 6 Aluminium Lake* D & C Yellow No. 10 Lake 112 FD & C Red No. 40 Aluminium Lake 125 FD & C Yellow No. 6 Aluminium Lake* FD & C Red No. 40 Aluminium Lake FD & C Blue No. 1 Aluminium Lake 137 FD & C Blue No. 1 Aluminium Lake 150 FD & C Blue No. 2 Aluminium Lake 175 FD & C Red No. 40 Aluminium Lake FD & C Blue No. 2 Aluminium Lake 200 FD & C Red No. 40 Aluminium Lake 300 FD & C Yellow No. 6 Aluminium Lake* FD & C Blue No. 1 Aluminium Lake D & C Yellow No. 10 Lake * Note - FD&C Yellow No. 6 is orange in color. Levothyroxine Sodium Tablet, USP meets USP Dissolution Test 2. str

Levothyroxine sodium tablets USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3',5,5' tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 •H 2 O, molecular weight of 798.85 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablets USP contains the inactive ingredients corn starch, croscarmellose sodium, magnesium stearate, mannitol and sodium bicarbonate. Table 9 provides a listing of the color additives by tablet strength: Levothyroxine sodium tablet USP meets USP Dissolution Test 2. Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake* 50 FD&C Blue 1 Aluminum Lake 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake 100 FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 112 D&C Red No. 27 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake, D&C Yellow No. 10 Aluminum Lake *Note – FD&C Yellow No. 6 Aluminum Lake is peach in color. image-1

Levothyroxine sodium tablets, USP is L-thyroxine (T4) and contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 (anhydrous), and structural formula as shown: Levothyroxine sodium tablets, USP for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients microcrystalline sodium, light magnesium oxide, sodium starch glycolate and sodium stearyl fumarate. Levothyroxine sodium tablets, USP contain no ingredients made from a gluten-containing grain (wheat, barley, or rye). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablet Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 5 Aluminum Lake 100 FD&C Yellow No. 5 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 FD&C Red No. 40 Aluminum Lake, Carmine 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, Carmine 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake Levothyroxine sodium tablets, USP meets USP Dissolution Test 7. description

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 2H 2 O and its structural formula is: Lisinopril is a white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn). Lisinopril

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 •2H 2 O and its structural formula is: Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. * : Pregelatinized starch is a physically modified corn (maize) starch. Chemical Structure

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 •2H 2 O and its structural formula is: Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. * : Pregelatinized starch is a physically modified corn (maize) starch. Chemical Structure

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 •2H 2 O and its structural formula is: Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. * : Pregelatinized starch is a physically modified corn (maize) starch. Chemical Structure

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 •2H 2 O and its structural formula is: Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. * : Pregelatinized starch is a physically modified corn (maize) starch. Chemical Structure

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 2H 2 O and its structural formula is: Lisinopril is a white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn). Lisinopril

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 •2H 2 O and its structural formula is: Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch * , corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. * : Pregelatinized starch is a physically modified corn (maize) starch. Chemical Structure

Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C 21 H 31 N 3 O 5 2H 2 O and its structural formula is: Lisinopril is a white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients: 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn). Lisinopril

Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-(R*,R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33 H 34 FN 2 O 5 ) 2 Ca•3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium, USP is a white to off-white crystalline powder. Atorvastatin calcium, USP is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: anhydrous lactose, NF; colloidal silicon dioxide, NF; copovidone, NF; croscarmellose sodium, NF; magnesium stearate, NF; mannitol, USP; silicified microcrystalline cellulose, NF; sodium bicarbonate, USP; sodium carbonate anhydrous, NF; sodium lauryl sulfate, NF; hypromellose, polyethylene glycol, talc, titanium dioxide, and iron oxide yellow. This product meets the requirements of USP Dissolution Test-2. chemical-structure

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is C 66 H 68 CaF 2 N 4 O 10 .3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.359 mg, 20.718 mg, 41.436 mg, or 82.872 mg atorvastatin calcium trihydrate) and the following inactive ingredients: Croscarmellose sodium, NF; Hydroxy propyl cellulose, NF; , Lactose monohydrate, NF; Magnesium stearate, NF; , Microcrystalline cellulose, NF; Polysorbate 80, NF; Precipitated calcium carbonate, NF; Hypromellose; Macrogol; Talc and Titanium dioxide. image description

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is C 66 H 74 CaF 2 N 4 O 13 and its molecular weight is 1206.408. Its structural formula is: Atorvastatin calcium USP is a white to off-white crystalline powder. It is freely soluble in methanol and insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets USP, for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.845 mg, 21.69 mg, 43.38 mg, or 86.76 mg of atorvastatin calcium trihydrate) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxyl propyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The tablet coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Atorvastatin calcium tablets meets USP Dissolution Test 5. structure

Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole- 1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33 H 34 FN 2 O 5 ) 2 Ca•3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium, USP is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg or 80 mg of atorvastatin, USP and the following inactive ingredients: Calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The coating material contains hypromellose, polyethylene glycol, talc, titanium dioxide. atorvastatin-st

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium USP is (βR, δR)-2-(p-fluorophenyl)-β,δ-dihydroxy-5-isopropyl-3-phenyl-4(phenylcarbamoyl)pyrrole-l-heptanaote (1:2), trihydrate. The molecular formula of atorvastatin calcium USP is C 66 H 68 CaF 2 N 4 O 10 .3H 2 O and its molecular weight is 1209.41. Its structural formula is: Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium USP is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer, and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.73 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, magnesium aluminometasilicate, microcrystalline cellulose, polysorbate 80, precipitated calcium carbonate, polyvinyl alcohol, titanium dioxide, talc, polyethylene glycol and lecithin. structure

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is C 66 H 68 CaF 2 N 4 O 10 .3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.359 mg, 20.718 mg, 41.436 mg, or 82.872 mg atorvastatin calcium trihydrate) and the following inactive ingredients: Croscarmellose sodium, NF; Hydroxy propyl cellulose, NF; , Lactose monohydrate, NF; Magnesium stearate, NF; , Microcrystalline cellulose, NF; Polysorbate 80, NF; Precipitated calcium carbonate, NF; Hypromellose; Macrogol; Talc and Titanium dioxide. image description

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33 H 34 FN 2 O 5 ) 2 Ca∙3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium is a white to off-white crystalline powder that is insoluble in aqueous solution of pH 4.0 and acetonitrile. Atorvastatin calcium is very slightly soluble in water, in pH 7.4 phosphate buffer, and; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, macrogol, titanium dioxide and talc) and polysorbate 80. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). Dissolution meets USP test 4. Chemical Structure

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H -Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33 H 34 FN 2 O 5 ) 2 Ca 2+ •3H2O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending. atorvastatinfigure1.

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is C 66 H 68 CaF 2 N 4 O 10 .3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.359 mg, 20.718 mg, 41.436 mg, or 82.872 mg atorvastatin calcium trihydrate) and the following inactive ingredients: Croscarmellose sodium, NF; Hydroxy propyl cellulose, NF; , Lactose monohydrate, NF; Magnesium stearate, NF; , Microcrystalline cellulose, NF; Polysorbate 80, NF; Precipitated calcium carbonate, NF; Hypromellose; Macrogol; Talc and Titanium dioxide. image description

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium USP is (βR, δR)-2-(p-fluorophenyl)-β,δ-dihydroxy-5-isopropyl-3-phenyl-4(phenylcarbamoyl)pyrrole-l-heptanaote (1:2), trihydrate. The molecular formula of atorvastatin calcium USP is C 66 H 68 CaF 2 N 4 O 10 .3H 2 O and its molecular weight is 1209.41. Its structural formula is: Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium USP is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer, and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.73 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, magnesium aluminometasilicate, microcrystalline cellulose, polysorbate 80, precipitated calcium carbonate, polyvinyl alcohol, titanium dioxide, talc, polyethylene glycol and lecithin. structure

Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C 33 H 34 FN 2 O 5 ) 2 Ca∙3H 2 O and its molecular weight is 1209.42. Its structural formula is: Atorvastatin calcium is a white to off-white crystalline powder that is insoluble in aqueous solution of pH 4.0 and acetonitrile. Atorvastatin calcium is very slightly soluble in water, in pH 7.4 phosphate buffer, and; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, macrogol, titanium dioxide and talc) and polysorbate 80. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). Dissolution meets USP test 4. Chemical Structure

Metformin hydrochloride extended-release tablets, USP contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C 4 H 11 N 5 •HCl and a molecular weight of 165.63. Its structural formula is: Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: ammonio methacrylate copolymer type A, ammonio methacrylate copolymer type B, colloidal silicone dioxide, crospovidone, dibutyl sebacate, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin hydrochloride extended-release tablets USP meets USP Dissolution Test 12. Image

Metformin Hydrochloride Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below Metformin hydrochloride is a white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene hydrochloride. The pK a of metformin is 12.4. The p H of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin Hydrochloride Tablets contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients pregelatinized starch (maize), povidone, crospovidone, magnesium stearate. In addition, the coating for the tablets contains hypromellose, polyethylene glycol, titanium dioxide and flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol and silicon dioxide. Formula

Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3. Formula

Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and povidone. In addition, the tablet coating material of 500 mg, 850 mg and 1,000 mg tablets contains hypromellose, polyethylene glycol, titanium dioxide and artificial blackberry flavor. Structure

Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contain 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients carboxymethylcellulose sodium, copovidone, hypromellose, magnesium stearate and microcrystalline cellulose. The USP dissolution test is pending. Chemical Structure

Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The p Ka of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients hypromellose, magnesium stearate, polyethylene glycol/macrogol, povidone and titanium dioxide. Metformin hydrochloride tablets dissolution USP Test-1 is used. Metformin Structure

Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and povidone. In addition, the tablet coating material of 500 mg, 850 mg and 1,000 mg tablets contains hypromellose, polyethylene glycol, titanium dioxide and artificial blackberry flavor. Structure

Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 ∙ HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contain 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients carboxymethylcellulose sodium, copovidone, hypromellose, magnesium stearate and microcrystalline cellulose. The USP dissolution test is pending. Chemical Structure