lupin pharmaceuticals,inc. - Medication Listings

Amlodipine and Valsartan Tablets are a fixed combination of amlodipine and valsartan. Amlodipine and Valsartan Tablets contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT 1 receptor subtype. Valsartan is a white to off-white hygroscopic powder, soluble in ethanol and methanol and insoluble in water. Valsartan's chemical name is N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4yl]methyl]-L-valine; its structural formula is: Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and Valsartan Tablets are formulated in 4 strengths for oral administration with a combination of amlodipine besylate (6.9 mg or 13.9 mg), equivalent to 5 mg or 10 mg of amlodipine respectively, with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, mannitol and sodium starch glycolate. C:\Users\LdeepthI\Desktop\amlo-valsrtn\amlo-strctre.jpg C:\Users\LdeepthI\Desktop\amlo-valsrtn\amlo-val-strctre.jpg

Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white to creamy white powder, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (–)-L-α-hydrazino-α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C 10 H 14 N 2 O 4 •H 2 O, and its structural formula is: Carbidopa tablets contain 25 mg of carbidopa. Inactive ingredients are microcrystalline cellulose, FD&C Yellow 6, magnesium stearate and pregelatinized starch. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.3. Image

Cevimeline is cis-2'-methylspiro {1-azabicyclo [2.2.2] octane-3, 5'-[1,3] oxathiolane} hydrochloride, hydrate (2:1). Its empirical formula is C 10 H 17 NOS.HCl.1/2 H 2 O, and its structural formula is: Cevimeline has a molecular weight of 244.79. It is a white to off white powder with a melting point range of 201 to 203°C. It is freely soluble in alcohol and chloroform, very soluble in water, and virtually insoluble in ether. The pH of a 1% solution ranges from 4.6 to 5.6. Inactive ingredients include lactose monohydrate, hydroxypropyl cellulose, and magnesium stearate; a hard gelatin capsule which contains D&C Yellow #10, FD&C Red #40, FD&C Yellow #6, titanium dioxide and gelatin; and an imprinting ink which contains shellac, iron oxide black, isopropyl alcohol, butyl alcohol, propylene glycol and ammonium hydroxide structure

Clobetasol propionate topical solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)pregna-1, 4-diene-3,20-dione, and it has the following structural formula: Clobetasol propionate has the molecular formula C 25 H 32 CIFO 5 and a molecular weight of 467. It is a white to almost white colored crystalline powder insoluble in water. Clobetasol propionate topical solution, USP contains clobetasol propionate 0.5 mg/g in a base of purified water, isopropyl alcohol (39.3%), carbomer 934P and sodium hydroxide. structure

Clobetasol propionate ointment USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß, 16ß)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1, 4-diene-3, 20-dione, and it has the following structural formula: Clobetasol propionate has the molecular formula C 25 H 32 CIFO 5 and a molecular weight of 467. It is a white or almost white crystalline powder insoluble in water. Clobetasol propionate ointment USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum. Structure

Cyanocobalamin is a synthetic form of vitamin B12. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.35%. The molecular formula is C 63 H 88 CoN 14 O 14 P, which corresponds to a molecular weight of 1355.38 and the following structural formula: Figure 1. Cyanocobalamin Chemical Structure Cyanocobalamin occurs as red to purplish red crystalline powder or small crystals. It is very hygroscopic in the anhydrous form, and sparingly to moderately soluble in water (1:80). Its pharmacologic activity is destroyed by heavy metals (iron) and strong oxidizing or reducing agents (vitamin C), but not by autoclaving for short periods of time (15-20 minutes) at 121°C. The vitamin B 12 coenzymes are very unstable in light. Cyanocobalamin Nasal Spray is a solution of cyanocobalamin, USP (vitamin B 12 ) for administration as a spray to the nasal mucosa. Each single-use device of Cyanocobalamin Nasal Spray contains 0.125 mL of a 500 mcg/0.1 mL solution of cyanocobalamin with, benzalkonium chloride in purified water, citric acid, glycerin and sodium citrate. The spray solution has a pH between 4.5 and 5.5. Each spray delivers an average of 500 mcg of cyanocobalamin per actuation. Structure

Dexmethylphenidate hydrochloride tablets contains dexmethylphenidate hydrochloride, a CNS stimulant. Dexmethylphenidate hydrochloride is the d-threo enantiomer of racemic methylphenidate hydrochloride. Dexmethylphenidate hydrochloride tablets are available as 2.5 mg, 5 mg, and 10 mg strength tablets for oral administration. Chemically, dexmethylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, (R,R’)-(+)-. Its structural formula is: C 14 H 19 NO 2 •HCl M.W. 269.77 g/mol Note: * = asymmetric carbon centers Dexmethylphenidate hydrochloride is a white crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: citric acid anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, and FD&C Blue No.1 (2.5 mg tablets), D&C Yellow #10 (5 mg tablets); the 10 mg tablet contains no dye. structure

Dextroamphetamine sulfate, USP is the dextro isomer of the compound d,l -amphetamine sulfate, a sympathomimetic amine of the amphetamine group. Chemically, dextroamphetamine is d-alpha-methylphenethylamine, and is present in all forms of dextroamphetamine sulfate, USP as the neutral sulfate. The structural formula is as follows: (C 9 H 13 N) 2 ∙H 2 SO 4 Molecular Weight: 368.49 Inactive Ingredients Colloidal Silicon Dioxide, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose and Povidone. The 5 mg also contains D&C yellow no. 10, Iron oxide yellow and Iron oxide red. The 10 mg also contains FD&C yellow no. 6 aluminium lake and FD&C red no. 40 aluminium lake. 7ef15555-figure-01

Diazepam rectal gel rectal delivery system is a non-sterile diazepam gel provided in a prefilled, unit-dose, rectal delivery system. Diazepam rectal gel contains 5 mg/g diazepam, benzoic acid, benzyl alcohol, polyethylene glycol-400, povidone, propylene glycol, sodium benzoate and water. Diazepam rectal gel is clear to slightly yellow and has a pH between 5.8 – 6.5. Diazepam, the active ingredient of diazepam rectal gel, is a benzodiazepine anticonvulsant with the chemical name 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2 H -1,4-benzodiazepin-2-one. The structural formula is as follows: Diazepam

Diclofenac sodium topical solution contains 1.5% w/w diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug (NSAID), designated chemically as 2-[(2,6 dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. It is a white to off-white, hygroscopic crystalline powder that is freely soluble in methanol, soluble in alcohol, slightly soluble in acetone and sparingly soluble in water. The molecular weight is 318.14. Its molecular formula is C 14 H 10 Cl 2 NNaO 2 and it has the following structural formula: Each 1 mL of solution contains 16.05 mg of diclofenac sodium. The inactive ingredients in diclofenac sodium topical solution include: dimethyl sulfoxide USP (DMSO, 45.5% w/w), propylene glycol, alcohol, glycerin and purified water. Chemical Structure

Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules USP, 50 mg, 75 mg, and 100 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, and 100 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is 2-Naphthacenecarboxamide,4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-,[4 S -(4α,4aα,5α,5aα,6α,12aα)]-,monohydrate. Structural formula: C 22 H 24 N 2 O 8 • H 2 O M.W. = 462.45 Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains titanium dioxide, FD&C Red # 3, D&C Yellow # 10, gelatin, sodium lauryl sulfate, for the 50 mg strength; iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin, sodium lauryl sulfate for the 75 mg strength and iron oxide black, Iron Oxide Red, Iron Oxide Yellow, Titanium Dioxide, FD & C Red# 3, D&C Yellow # 10, gelatin, sodium lauryl sulfate for the 100 mg strength. The capsules are printed with edible ink containing shellac, titanium dioxide, black iron oxide, red iron oxide and potassium hydroxide for 50 mg, 75 mg and 100 mg strengths. Doxycycline structural formula.

Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Tablets (doxycycline hydrochloride hemiethanolate hemihydrate) for oral administration. The structural formula of doxycycline hyclate is: With a molecular formula of C 22 H 24 N 2 O 8 •H 2 O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22 H 24 N 2 O 8 •HCl) 2 •C 2 H 6 O•H 2 O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients are: colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium, magnesium stearate, microcrystalline cellulose, ethyl alcohol and a coating containing hypromellose, polyethylene glycol, titanium dioxide, FD&C Blue No. 2 and FD&C Yellow No. 6. structure

The active ingredient in Famotidine for Oral Suspension is a histamine H 2 -receptor antagonist. Famotidine is N-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4- thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C 8 H 15 N 7 O 2 S 3 and its molecular weight is 337.43. Its structural formula is: Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Each 5 mL of the oral suspension when prepared as directed contains 40 mg of famotidine and the following inactive ingredients: anhydrous citric acid, flavors (cherry, banana, and mint), microcrystalline cellulose and carboxymethylcellulose sodium, confectioner's sugar, corn starch, colloidal silicon-dioxide and xanthan gum. Added as preservatives are sodium benzoate and sodium methylparaben. C:\Documents and Settings\spolina\desktop\Labeling Response\Famotidine for oral susp\structure.JPG

Flucytosine Capsules USP, an antifungal agent, is available as 250 mg and 500 mg capsules for oral administration. In addition to the active ingredient of flucytosine, each capsule contains lactose monohydrate, colloidal silicon dioxide, talc, sodium starch glycolate, magnesium stearate and hard gelatin capsule shell which contains gelatin, purified water, black iron oxide, FD&C Blue No.1, titanium dioxide and sodium lauryl sulfate for 250 mg strength; gelatin, purified water, black iron oxide and titanium dioxide for 500 mg strength. The imprinting ink contains black iron oxide, shellac, potassium hydroxide, titanium dioxide, povidone, sodium hydroxide and FD &C Red No. 40 aluminum lake for 250 mg and 500 mg strengths. Chemically, flucytosine is 5-fluorocytosine, a fluorinated pyrimidine which is related to fluorouracil and floxuridine. It is a white or almost white, crystalline powder with a molecular weight of 129.09 and the following structural formula: Click to Zoom In

Fluocinolone Acetonide Topical Solution USP, 0.01% is intended for topical administration. The active component is the corticosteroid fluocinolone acetonide, which has the chemical name pregna-1,4-diene-3,20-dione,6,9-difluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis (oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinolone Acetonide Topical Solution USP, 0.01% contains fluocinolone acetonide 0.1 mg/mL in a water washable base of citric acid and propylene glycol. Chemical Structure

Fluocinonide Topical Solution USP, 0.05% is intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(6α,11β,16α)-. It has the following chemical structure: Fluocinonide Topical Solution USP, 0.05% contains fluocinonide 0.5 mg/mL in a solution of citric acid, ethyl alcohol (35%), diisopropyl adipate, propylene glycol and purified water. In this formulation, the active ingredient is totally in solution. Image

Directions do not take more than directed unless advised by your doctor the bottle top is a measuring cap marked to contain 17 grams of powder when filled to the indicated line. adults and children 17 years of age and older: use once a day fill to top of line in cap which is marked to indicate the correct dose (17 g) stir and dissolve in any 4 to 8 ounces of beverage (cold, hot or room temperature) then drink do not combine with starch-based thickeners used for difficulty swallowing ensure that the powder is fully dissolved before drinking do not drink if there are any clumps do not use more than 7 days children 16 years of age or under: ask a doctor Other Information store at 20°- 25°C (68°– 77°F) tamper-evident: do not use if printed foil seal under cap, printed with "SEALED for YOUR PROTECTION" is missing, open or broken

GaviLyte- C with flavor pack is a white, colon lavage preparation provided as water-soluble components for solution. In solution this preparation with lemon flavor pack added delivers the following, in grams per liter. Polyethylene glycol 3350 240.00 Sodium chloride 5.84 Potassium chloride 6.72 Sodium bicarbonate 2.98 Sodium sulfate 22.72 Flavor ingredients 0.500 When dissolved in sufficient water to make 4 liters, the final solution contains 125 mEq/L sodium, 10 mEq/L potassium, 20 mEq/L bicarbonate, 80 mEq/L sulfate, 35 mEq/L chloride and 18 mEq/L polyethylene glycol 3350. The reconstituted solution is an isosmotic solution, for oral administration, having mild salty taste. This preparation can be used without the lemon flavor pack and is administered orally or via nasogastric tube. Each lemon flavor pack (2 g) contains natural lemon flavor powder, saccharin sodium, maltodextrin.

Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF Sodium Sulfate, USP The chemical name is Na 2 SO 4 . The average Molecular Weight is 142.04. The structural formula is: Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na+ Cl- Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl a b c

For oral solution: Each 4 liter (4L) GaviLyte-N jug contains a white powder for reconstitution. GaviLyte-N is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 420g, sodium bicarbonate 5.72 g, sodium chloride 11.2 g, potassium chloride 1.4 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF Sodium Bicarbonate, USP The chemical name is NaHCO 3 . The average Molecular Weight is 84.01. The structural formula is: Sodium Chloride, USP The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is: Na+ Cl- Potassium Chloride, USP The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is: K-Cl PEG structure Sod-Bicarbonate

Hydrocodone Bitartrate and Acetaminophen Tablets, USP are available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: Acetaminophen, 4´-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/300 mg contains: Hydrocodone Bitartrate ...... 5 mg Acetaminophen................. 300 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/300 mg contains: Hydrocodone Bitartrate ......... 7.5 mg Acetaminophen ................ 300 mg Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/300 mg contains: Hydrocodone Bitartrate .......... 10 mg Acetaminophen.............. 300 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Meets USP Dissolution Test 2. Hydrocodone APAP

Hydrocodone Bitartrate and Acetaminophen Tablets, USP are available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: Acetaminophen, 4´-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains: Hydrocodone Bitartrate ...... 5 mg Acetaminophen................. 325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains: Hydrocodone Bitartrate ......... 7.5 mg Acetaminophen ................ 325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains: Hydrocodone Bitartrate .......... 10 mg Acetaminophen.............. 325 mg In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, colloidal silicon dioxide, crospovidone, stearic acid, magnesium stearate, corn starch, pregelatinized starch and povidone. Meets USP Dissolution Test 2. Hydrocodone APAP

Hydrocodone Bitartrate and Homatropine Methylbromide Tablets, USP contains hydrocodone an opioid agonist, and homatropine a muscarinic antagonist. Each tablet of Hydrocodone Bitartrate and Homatropine Methylbromide contains 5 mg of Hydrocodone Bitartrate, USP and 1.5 mg of Homatropine Methylbromide, USP for oral administartion. Hydrocodone Bitartrate and Homatropine Methylbromide Tablets also contains the following inactive ingredients: anhydrous lactose, dicalcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate. Hydrocodone Bitartrate: The chemical name for hydrocodone bitartrate is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one-tartrate (1:1) hydrate (2:5). It occurs as a fine white crystal or crystalline powder which is derived from the opium alkaloid, thebaine. It has a molecular weight of 494.50 and has the following chemical structure: Homatropine Methylbromide The chemical name for homatropine methylbromide is 8- Azoniabicyclo[3.2.1]octane, 3-[(hydroxyphenyl-acetyl)oxy]-8, 8-dimethyl-,bromide,endo. It occurs as a white crystal or fine white crystalline powder. It has a molecular weight of 370.29 and has the following chemical structure: C 17 H 24 BrNO 3 Image structure

Linezolid Tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4- morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C 16 H 20 FN 3 O 4 . Its molecular weight is 337.35, and its chemical structure is represented below: Linezolid tablets for oral administration contain 600 mg linezolid, supplied as white, oval, film-coated tablets, debossed with "n 022" on one side and plain on other side. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, crospovidine, magnesium stearate, titanium dioxide, polydextrose, hypromellose, triacetin, and polyethylene glycol. structure

Methergine ® (methylergonovine maleate) is a semi-synthetic ergot alkaloid used for the prevention and control of postpartum hemorrhage. Methergine is available in tablets for oral ingestion containing 0.2 mg methylergonovine maleate. Tablets Active ingredient: Methylergonovine maleate, USP, 0.2 mg. Inactive ingredients: acacia, corn starch, gelatin, lactose monohydrate, methylparaben, microcrystalline cellulose, povidone, propylparaben, stearic acid, and tartaric acid. Chemically, methylergonovine maleate is designated as ergoline-8-carboxamide, 9, 10-didehydro- N -[1-(hydroxymethyl) propyl]-6-methyl-, [8β( S )]-, (Z)-2-butenedioate (1:1) (salt). Its structural formula is: structure

Methylphenidate hydrochloride tablets contains methylphenidate hydrochloride, a CNS stimulant. It is available as tablets of 5 mg, 10 mg, and 20 mg strength for oral administration. Methylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is: Methylphenidate hydrochloride, USP is a white to off-white fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Methylphenidate hydrochloride tablets contains the following inactive ingredients: D&C Yellow No. 10 (5-mg and 20-mg tablets), lactose monohydrate, microcrystalline cellulose, sodium starch glycolate (Potato), magnesium stearate, and talc. Image

Methylphenidate hydrochloride is a mild central nervous system (CNS) stimulant, available as 2.5 mg, 5 mg and 10 mg chewable tablets for oral administration. Methylphenidate hydrochloride is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is Methylphenidate hydrochloride USP is a white to off-white powder. Its solutions are acid to litmus. It is soluble in water, alcohol, and chloroform. Each methylphenidate hydrochloride chewable tablet, for oral administration, contains 2.5 mg, 5 mg or 10 mg of methylphenidate hydrochloride USP. In addition, methylphenidate hydrochloride chewable tablets also contain the following inactive ingredients: aspartame, maltose, microcrystalline cellulose, grape flavor, pregelatinized starch, phosphoric acid, and stearic acid. Chemical Structure

Methylphenidate hydrochloride oral solution contains methylphenidate hydrochloride a CNS stimulant. It is available as an oral solution in 5 mg/5 mL and 10 mg/5 mL strengths for oral administration. Chemically, methylphenidate hydrochloride is (d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride and its structural formula is: Methylphenidate hydrochloride, USP is a white to off white powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Each mL of methylphenidate hydrochloride oral solution 5 mg/5 mL contains 1 mg of methylphenidate hydrochloride, USP. Each mL of methylphenidate hydrochloride oral solution 10 mg/5 mL contains 2 mg of methylphenidate hydrochloride USP. Methylphenidate hydrochloride oral solution also contains the following inactive ingredients: PEG 1450, glycerin, phosphoric acid grape flavor, and purified water. struc

Metoclopramide hydrochloride, the active ingredient of Metoclopramide Orally Disintegrating Tablets, is a dopamine-2 (D2) antagonist. Metoclopramide hydrochloride (metoclopramide monohydrochloride monohydrate), is a white or almost white crystalline powder, freely soluble in water. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxy benzamide monohydrochloride monohydrate. The molecular formula is C14H22ClN3O2•HCl•H2O. Its molecular weight is 354.3. The structural formula is: Metoclopramide Orally Disintegrating Tablets is an orally disintegrating tablet for oral administration and is available in 5 mg and 10 mg strengths. Each Metoclopramide Orally Disintegrating Tablets 5 mg tablet contains 5 mg metoclopramide (equivalent to 5.91 mg of metoclopramide hydrochloride USP). Each Metoclopramide Orally Disintegrating Tablets 10 mg tablet contains 10 mg metoclopramide (equivalent to 11.82 mg metoclopramide hydrochloride USP). Metoclopramide Orally Disintegrating Tablets includes the following inactive ingredients: phosphoric acid, mannitol and starch, microcrystalline cellulose, colloidal silicon dioxide, amino methacrylate copolymer, butylated hydroxyanisole, butylated hydroxytoluene, crospovidone, aspartame, N-C mint flavor, magnesium stearate. Metoclopramide

Misoprostol oral tablets contain either 100 mcg or 200 mcg of misoprostol, a synthetic prostaglandin E1 analog. Misoprostol contains approximately equal amounts of the two diastereomers presented below with their enantiomers indicated by (±): Misoprostol is a water-soluble, viscous liquid. Inactive ingredients of tablets are hydrogenated castor oil, microcrystalline cellulose, and crospovidone 9023f150-figure-01

Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets (sodium phosphate monobasic monohydrate and sodium phosphate dibasic anhydrous) is an osmotic laxative used to clean the colon prior to colonoscopy. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is manufactured with a highly soluble tablet binder and does not contain microcrystalline cellulose (MCC). Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets are white to off-white uncoated tablet, modified oval shaped, biconvex, bisect on one side and plain on the other. Debossed "N" on the left side of the bisect and "03" on the right side of the bisect. Each Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablet contains 1.102 grams of Monobasic Sodium Phosphate, USP and 0.398 grams of Dibasic Sodium Phosphate, USP for a total of 1.5 grams of sodium phosphate per tablet. Inert ingredients include polyethylene glycol 8000, NF; and magnesium stearate, NF. Monobasic Sodium Phosphate and Dibasic Sodium Phosphate Tablets is gluten-free. The structural and molecular formulae and molecular weights of the active ingredients are shown below: Monobasic sodium phosphate, USP Dibasic sodium phosphate, USP structure 1 structure 2

Morphine sulfate extended-release tablets are for oral use and contains morphine sulfate, an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, colloidal silicon dioxide, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). The 15 mg tablets also contain: FD &C Blue #2 /Indigo carmine aluminum lake and FD&C Blue #1/Brilliant blue FCF aluminum lake. The 30 mg tablets also contain: D&C Red # 27/Phloxine aluminum lake and FD&C Blue #.1/Brilliant blue FCF aluminum lake. The 60 mg tablets also contain: D&C Yellow #10 aluminum lake and FD&C Yellow #6 / Sunset yellow FCF aluminum Lake. The 100 mg tablets also contain: FD & C Blue # 2/ Indigo carmine aluminum lake, FD & C yellow # 6 /Sunset yellow FCF aluminum lake and FD & C red # 40/Allura red aluminum lake. The 200 mg tablets also contain: D&C Yellow #10 aluminum lake and FD&C Blue #1/ Brilliant blue FCF aluminum lake. Morphine sulfate is an white to off-white crystalline powder. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is: structure

Indications Use for women to reduce chance of pregnancy after unprotected sex (if a contraceptive failed or if you did not use birth control)

Nitrofurantoin, a synthetic chemical, is a stable, yellow, crystalline compound. Nitrofurantoin Oral Suspension, USP is an antibacterial agent for specific urinary tract infections. Nitrofurantoin oral suspension is available in 25 mg/5 mL liquid suspension for oral administration. Inactive Ingredients C:\Users\LdeepthI\Desktop\07575608-figure-01.jpg

Nitrofurantoin capsules, USP (macrocrystals) are a synthetic chemical of controlled crystal size. It is a stable, yellow, crystalline powder. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 50 mg and 100 mg capsules for oral administration. Each capsule contains 50 mg and 100 mg of nitrofurantoin macrocrystals. 1-[[(5-nitro-2-furanyl)methylene]amino]-2,4-imidazolidinedione Inactive Ingredients: Each 50 mg nitrofurantoin capsules USP, (macrocrystals) contains lactose monohydrate NF, corn starch NF, talc USP, gelatin, iron oxide red, iron oxide yellow, titanium dioxide. Each 100 mg nitrofurantoin capsules USP, (macrocrystals) contains lactose monohydrate NF, corn starch NF, talc USP, gelatin, iron oxide black, iron oxide yellow, titanium dioxide. The edible black ink contains: shellac, potassium hydroxide, propylene glycol and black iron oxide. image description

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths: Oxycodone Hydrochloride, USP.................................................................. 2.5 mg* (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone) Acetaminophen, USP...................................................................................... 325 mg Oxycodone Hydrochloride, USP.................................................................. 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone) Acetaminophen, USP...................................................................................... 325 mg Oxycodone Hydrochloride, USP.................................................................. 7.5 mg* (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone) Acetaminophen, USP...................................................................................... 325 mg Oxycodone Hydrochloride, USP.................................................................. 10 mg* (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone) Acetaminophen, USP...................................................................................... 325 mg All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: C 18 H 21 NO 4 ·HCl MW 351.82 Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: C 8 H 9 NO 2 MW 151.16 oxy-structure apap-structure

Oxycodone hydrochloride tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg ,or 30 mg, of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white to off-white, fine odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula: The tablets contain the following inactive ingredients: microcrystalline cellulose, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. Apart from the above ingredients, 10 mg tablet contains lake blend LB-1171 (gray powder), 15 mg tablet contains lake blend LB-451 (green), 20 mg tablet contains lake blend LB-1635 (pink powder) and 30 mg tablet contains lake blend LB-105000 (blue powder). The 5 mg, 10 mg, 15 mg, 20 mg and 30 mg tablets contain the equivalent of 4.5 mg, 9.0 mg, 13.5 mg, 18.0 mg and 27.0 mg, respectively, of oxycodone free base. Image

Pentazocine and Naloxone Tablets, USP contain pentazocine hydrochloride, USP, a partial opioid agonist, equivalent to 50 mg base and is a member of the benzazocine series (also known as the benzomorphan series), and naloxone hydrochloride, USP, an opioid antagonist equivalent to 0.5 mg base. Pentazocine and Naloxone Tablets, USP are an analgesic for oral administration. Chemically, pentazocine hydrochloride, USP is (2 R *,6 R *,11 R *)-1,2,3,4,5,6-Hexahydro-6,11-dimethyl-3-(3-methyl-2-butenyl)-2,6-methano-3-benzazocin-8-ol hydrochloride, a white, crystalline substance soluble in acidic aqueous solutions, and has the following structural formula: Chemically, naloxone hydrochloride, USP is Morphinan-6-one,4,5-epoxy-3,14-dihydroxy-17-(2- propenyl)-, hydrochloride, (5α)-. It is a slightly off-white powder, and is soluble in water and dilute acids, and has the following structural formula: Inactive Ingredients: colloidal silicon dioxide, dibasic calcium phosphate, D&C Yellow No. 10, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and pregelatinized starch. Pentazocine Structure Naloxone Structure

Phenelzine Sulfate Tablets, USP (phenelzine sulfate) is a potent inhibitor of monoamine oxidase (MAO). Phenelzine sulfate is a hydrazine derivative. It has a molecular weight of 234.27 and is chemically described as C 8 H 12 N 2 • H 2 SO 4 . Its chemical structure is shown below: Each Phenelzine Sulfate Tablets film-coated for oral administration contains phenelzine sulfate equivalent to 15 mg of phenelzine base and the following inactive ingredients: mannitol, USP; colloidal silicon dioxide, NF; povidone, USP; edetate disodium, USP; magnesium stearate, NF; purified water, USP; polyvinyl alcohol part hydrolyzed USP, polyethylene glycol-3350 NF, FD&C yellow # 6, talc USP and titanium dioxide USP. 4e68c327-figure-01

Potassium Chloride is a white crystalline powderIt is freely soluble in water and practically insoluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: Citric Acid Anhydrous, Silicon Dioxide, FD&C Yellow No.6, N-C Natural and Artificial Orange Flavor, and Sucralose.

Potassium Chloride is a white crystalline powder or colorless crystals. It is freely soluble in water and practically insoluble in alcohol. Chemically, potassium chloride is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.

Potassium chloride extended-release tablet USP 20 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. Potassium chloride extended-release tablet USP 10 mEq K is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white crystalline powder. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride extended-release tablet USP is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride extended-release tablet USP begins disintegrating into microencapsulated crystals within seconds and completely disintegrates within one minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients : microcrystalline cellulose, croscarmellose sodium, ethylcellulose, triethyl citrate, ethyl alcohol and isopropyl alcohol. USP Assay Test Pending.

Quinapril and Hydrochlorothiazide Tablets is a fixed-combination tablet that combines an angiotensin-converting enzyme (ACE) inhibitor, quinapril hydrochloride, and a thiazide diuretic, hydrochlorothiazide. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1- (ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its empirical formula is C25H30N2O5. HCl and its structural formula is: Quinapril hydrochloride is a white to off-white powder crystalline solid with a pink cast at times that is freely soluble in aqueous solvents. Hydrochlorothiazide is chemically described as: 6-Chloro-3,4-dihydro-2H-1,2,4- benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2 and its structural formula is: M.W. = 297.72 Hydrochlorothiazide is a white to off-white, crystalline powder which is slightly soluble in water but freely soluble in sodium hydroxide solution. Quinapril and Hydrochlorothiazide Tablets, USP are available for oral use as fixed combination tablets in three strengths of quinapril with hydrochlorothiazide: 10 mg (equivalent to 10.83 mg of Quinapril Hydrochloride) with 12.5 mg, 20 mg (equivalent to 21.66 mg of Quinapril Hydrochloride) with 12.5 mg, and 20 mg (equivalent to 21.66 mg of Quinapril Hydrochloride) with 25 mg. Inactive ingredients: carnauba wax NF, magnesium hydroxide USP, microcrystalline cellulose NF, crospovidone NF, magnesium stearate NF, polyvinyl alcohol-part hydrolyzed USP, titanium dioxide USP, talc USP, lecithin (soya) NF, FD&C yellow # 6/ sunset yellow FCF aluminum lake, xanthan gum. structure 1 structure 2

Tinidazole is a synthetic antiprotozoal and antibacterial agent. It is 1-[2-(ethylsulfonyl)ethyl]-2-methyl-5-nitroimidazole, a second-generation 2-methyl-5-nitroimidazole, which has the following chemical structure: Tinidazole pink oral tablets contain 250 mg or 500 mg of tinidazole. Inactive ingredients include pregelatinized starch NF, croscarmellose sodium NF, magnesium stearate NF, microcrystalline cellulose NF, polyvinyl alcohol-part hydrolyzed USP, titanium dioxide USP, polyethylene glycol 3000 NF, talc USP, and FD&C red # 40 aluminum lake. structure

Chemically, trimethobenzamide hydrochloride is N-[ p -[2-(dimethylamino)ethoxy]benzyl]-3,4,5-trimethoxybenzamide monohydrochloride. It has a molecular weight of 424.92 and the following structural formula: Each capsule for oral use contains trimethobenzamide hydrochloride equivalent to 300 mg. The inactive ingredients are lactose monohydrate, magnesium stearate and pregelatinized starch. The capsule shell contains the following ingredients: D&C Red # 28, FD&C Blue # 1, FD&C Red # 40, gelatin and titanium dioxide. White ink contains the following ingredients: 2-ethoxyethanol, industrial methylated spirit, lecithin, purified water, shellac glaze, simethicone emulsion and titanium dioxide. structure

Trimethoprim is a synthetic antibacterial available in tablet form for oral administration. Each scored white tablet contains 100 mg trimethoprim. Trimethoprim is 5-[(3,4,5-trimethoxyphenyl)methyl]-2,4-pyrimidinediamine. It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.32 and the molecular formula C 14 H 18 N 4 O 3 . The structural formula is: Inactive Ingredients Colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, and purified water. C:\Users\LdeepthI\Desktop\tri-strctre.jpg

Voriconazole, an azole antifungal agent is available as a powder for oral suspension. The structural formula is: Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H -1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C 16 H 14 F 3 N 5 O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole for oral suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 49 g powder for oral suspension are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include colloidal silicon dioxide, titanium dioxide, xanthan gum, sodium citrate dihydrate, sodium benzoate, anhydrous citric acid, natural and artificial orange flavor, and sucrose. structure

Voriconazole, an azole antifungal agent is available as film-coated tablets for oral administration. The structural formula is: Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4 triazol-1-yl)-2-butanol with an empirical formula of C 16 H 14 F 3 N 5 O and a molecular weight of 349.3. Voriconazole drug substance is a white to almost white powder. Voriconazole Tablets contain 50 mg or 200 mg of voriconazole. The inactive ingredients include lactose monohydrate, pregelatinized starch (maize starch), croscarmellose sodium, povidone, magnesium stearate and a coating containing hypromellose (HPMC 2910), titanium dioxide, lactose monohydrate and triacetin. structure

Zolpidem Tartrate Sublingual Tablets contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Zolpidem Tartrate Sublingual Tablets are available in 1.75 mg and 3.5 mg strength tablets for sublingual administration. Zolpidem Tartrate Sublingual Tablets are intended to be placed under the tongue where they will disintegrate. Zolpidem Tartrate Sublingual Tablets contain a bicarbonate-carbonate buffer. Chemically, zolpidem tartrate is N,N -6-trimethyl-2- p -tolylimidazo[1,2- α ]pyridine-3-acetamide L-(+)-tartrate (2:1). Zolpidem tartrate is a white to almost white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each Zolpidem Tartrate Sublingual Tablet includes the following inactive ingredients: Crospovidone, Povidone, Mannitol, Polyvinylacetate, colloidal silicon dioxide, sodium carbonate anhydrous, sodium bicarbonate, natural and artificial spearmint flavor, aspartame, and magnesium stearate. Structure