long grove pharmaceuticals, llc - Medication Listings

AK-FLUOR ® (fluorescein injection, USP) is a sterile solution for use intravenously as a diagnostic aid. It is a dark reddish orange solution with a pH of 8.3 to 9.8 and an osmolality of 572 to 858 mOsm/kg. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'- dihydroxy, disodium salt.: The active ingredient is represented by the chemical structure: MW = 376.27 AK-FLUOR® 10% contains: Active: fluorescein sodium (10 % w/v, 100 mg/mL) Inactives: Sodium Hydroxide and/or Hydrochloric Acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. Chemical Structure

Carboprost tromethamine injection, USP, an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are: (15S)-15-methyl prostaglandin F2α tromethamine salt 7-(3α,5α-dihydroxy-2β-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl)- 1,3-propanediol (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt (15S)-15-methyl PGF2α-THAM The structural formula is represented below: The molecular formula is C 25 H 47 O 8 N. The molecular weight of carboprost tromethamine is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile. Structural Formula

Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai . The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9 H ,15 H -furo[3,2- i ]furo[2',3':5,6]pyrano[4,3- b ][1,4]dioxacyclopentacosin-5(4 H )-one, 2-[(2 S )-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-,(2 R ,3 R ,3a S ,7 R ,8a S ,9 S ,10a R ,11 S ,12 R ,13a R , 13b S ,15 S ,18 S ,21 S ,24 S ,26 R ,28 R ,29a S )-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C 40 H 59 NO 11 •CH 4 O 3 S. Eribulin mesylate has the following structural formula: Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment. Structural Formula

Methadone Hydrochloride Injection USP, 10 mg/mL is an opioid analgesic for parenteral use (intravenous, intramuscular or subcutaneous use). Methadone Hydrochloride Injection USP, 10 mg/mL contains methadone hydrochloride as the active pharmaceutical ingredient. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Its molecular formula is C 21 H 27 NO•HCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. Methadone hydrochloride has the following structural formula: Methadone Hydrochloride Injection is a sterile injectable solution available in 20 mL multiple-dose vials. Each mL of the Methadone Hydrochloride Injection contains: 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone free base), 5 mg of chlorobutanol, as a preservative, 9 mg of sodium chloride, as tonicity agent, and hydrochloric acid and sodium hydroxide as pH adjusters, in water for injection. The pH of the sterile injectable solution is between 3.0 to 6.5. Structural Formula

Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a catecholamine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Chemically, Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula: Norepinephrine in Sodium Chloride Injection is a clear, colorless, single dose sterile solution supplied as a ready-to-use intravenous infusion bag for intravenous use and does not require further dilution. Each mL contains the equivalent of 16 or 32 or 64 micrograms of norepinephrine base supplied as 31.90 or 63.80 or 127.6 micrograms per mL of norepinephrine bitartrate monohydrate. In addition, each mL of solution contains 0.01 mg edetate disodium dihydrate as a metal chelator and 9.0 mg sodium chloride for isotonicity. It has a pH of 3.5 to 4.5. Figure

Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHC03) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na + and HCO 3 -. Sodium Bicarbonate, USP is chemically designated NaHCO 3 , a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H 2 O.

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. Structural Formula

Vasopressin is a polypeptide hormone. Vasopressin in Sodium Chloride Injection is a sterile, aqueous solution of synthetic arginine vasopressin for intravenous administration. Each mL of the 0.2 unit/mL strength contains 0.2 units vasopressin, 0.0672 mg aspartic acid, 0.0180 mg boric acid, 0.05 mg chlorobutanol, 9 mg sodium chloride and Water for Injection, USP. Each mL of the 0.4 unit/mL strength contains 0.4 units vasopressin, 0.0672 mg aspartic acid, 0.0180 mg boric acid, 0.10 mg chlorobutanol, 9 mg sodium chloride and Water for Injection, USP. Each mL of the 1 unit/mL strength contains 1 unit vasopressin, 0.0672 mg aspartic acid, 0.0180 mg boric acid, 0.25 mg chlorobutanol, 9 mg sodium chloride and Water for Injection, USP. The chemical name of vasopressin is Cyclo (1-6) L-Cysteinyl-L-Tyrosyl-L-Phenylalanyl-L-Glutaminyl- L-Asparaginyl-L-Cysteinyl-L-Prolyl-L-Arginyl-L-Glycinamide. It is a white to off-white amorphous powder, freely soluble in water. The structural formula is: Molecular Formula: C 46 H 65 N 15 O 12 S 2 Molecular Weight: 1084.23 Structural Formula