golden state medical supply, inc. - Medication Listings

The chemical name for the active ingredient in nebivolol tablets is (1RS,1'RS)-1,1'-[(2RS,2'SR)-bis(6-fluoro-3,4-dihydro-2H-1-benzopyran-2-yl)]- 2,2'-iminodiethanol hydrochloride. Nebivolol is a racemate composed of d-Nebivolol and l-Nebivolol with the stereochemical designations of [SRRR]-nebivolol and [RSSS]-nebivolol, respectively. Nebivolol's molecular formula is (C 22 H 25 F 2 NO 4 •HCl) with the following structural formula: Nebivolol hydrochloride is a white to almost white powder that is soluble in methanol, dimethylsulfoxide, and N,N-dimethylformamide, sparingly soluble in ethanol, propylene glycol, and polyethylene glycol, and very slightly soluble in hexane, dichloromethane, and methylbenzene. Nebivolol tablets for oral administration contain nebivolol hydrochloride equivalent to 2.5, 5, 10, and 20 mg of nebivolol base. In addition, nebivolol tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polysorbate 80, and sodium lauryl sulfate. Structure-SRRR Structure-RSSS

Niacin Extended-release Tablets, USP (niacin tablet, film-coated extended-release), contain niacin, which at therapeutic doses is an antihyperlipidemic agent. Niacin (nicotinic acid, or 3-pyridinecarboxylic acid) is a white, crystalline powder, very soluble in water, with the following structural formula: Niacin extended-release tablets are unscored, red, film-coated tablets for oral administration and are available in two tablet strengths containing 500 and 1000 mg niacin. Niacin extended-release tablets also contain the inactive ingredients black iron oxide, colloidal silicon dioxide, hydroxypropyl cellulose, lecithin, polyethylene glycol, polyvinyl alcohol, red iron oxide, sodium stearyl fumarate, talc, titanium dioxide, and yellow iron oxide. USP Dissolution Test 5. Structure Formula

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17 H 18 N 2 O 6 , and has the structural formula: Product meets USP dissolution test 10. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extended release tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black. image1

Nifedipine is a drug belonging to a class of pharmacological agents known as the calcium channel blockers. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-, dimethyl ester, C 17 H 18 N 2 O 6 , and has the structural formula: Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine GITS (Gastrointestinal Therapeutic System) tablet is formulated as a once-a-day controlled-release tablet for oral administration designed to deliver 30, 60, or 90 mg of nifedipine. Inert ingredients in the formulations are: cellulose acetate; ferric oxide; hypromellose; magnesium stearate; polyethylene glycol; polyethylene oxide; potassium chloride; povidone; sodium chloride; titanium dioxide; propylene glycol and black iron oxide. The USP Dissolution Test is pending. structure System Components and Performance Nifedipine extended-release tablets are similar in appearance to a conventional tablet. It consists, however, of a semipermeable membrane surrounding an osmotically active drug core. The core itself is divided into two layers: an “active” layer containing the drug, and a “push” layer containing pharmacologically inert (but osmotically active) components. As water from the gastrointestinal tract enters the tablet, pressure increases in the osmotic layer and “pushes” against the drug layer, releasing drug through the precision laser-drilled tablet orifice in the active layer. Nifedipine extended-release tablets are designed to provide nifedipine at an approximately constant rate over 24 hours. This controlled rate of drug delivery into the gastrointestinal lumen is independent of pH or gastrointestinal motility. Nifedipine extended-release tablets depend for its action on the existence of an osmotic gradient between the contents of the bi-layer core and fluid in the gastrointestinal tract. Drug delivery is essentially constant as long as the osmotic gradient remains constant, and then gradually falls to zero. Upon swallowing, the biologically inert components of the tablet remain intact during gastrointestinal transit and are eliminated in the feces as an insoluble shell.

Nitroglycerin is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin USP; as well as calcium stearate powder, colloidal silicon dioxide, hydrogenated vegetable oil, lactose monohydrate, and pregelatinized starch. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is: Molecular weight: 227.09 structure

Norethindrone Acetate Tablets, USP (17-hydroxy-19-nor-17α-pregn-4-en-20-yn-3-one acetate), a synthetic, orally active progestin, is the acetic acid ester of norethindrone. It is a white, or creamy white, crystalline powder. The structural formula is as follows: C 22 H 28 O 3 M.W. 340.46 Each Norethindrone Acetate Tablet, USP for oral administration, contains norethindrone acetate, USP 5 mg. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, magnesium stearate, and microcrystalline cellulose. Norethindrone Acetate structural formula

NUVIGIL (armodafinil) is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C 15 H 15 NO 2 S and the molecular weight is 273.35. The chemical structure is: Armodafinil is a white to off-white, crystalline powder that is slightly soluble in water, sparingly soluble in acetone, and soluble in methanol. NUVIGIL tablets contain 50, 150, 200 or 250 mg of armodafinil and the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and pregelatinized starch. structural formula

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43. The chemical structure is: Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), ferric oxide yellow (20 mg), hydroxypropyl cellulose, hypromellose, polyethylene glycol and titanium dioxide (all strengths). structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43 g/mol. The chemical structure is: Olanzapine is a yellow powder. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, mannitol, microcrystalline cellulose and sucralose. Meets USP Disintegration Test 2 structure

Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT 1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil is described chemically as 2,3-dihydroxy-2-butenyl 4(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -( o -1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 and its structural formula is: Olmesartan medoxomil is a white to off-white crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and slightly soluble in methanol. Olmesartan medoxomil tablets, USP are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, silicified microcrystalline cellulose, talc, titanium dioxide, and (5 mg only) yellow iron oxide. FDA approved dissolution specification differs from the USP dissolution specification. Structural formula for olmesartan medoxomil

Uses Temporarily relieves itchy and red eyes due to pollen, ragweed, grass, animal hair and dander.

Omega-3-acid ethyl esters, USP, lipid-regulating agents, are supplied as a liquid-filled gel capsule for oral administration. Each 1-gram capsule of omega-3-acid ethyl esters, USP contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EP — approximately 465 mg) and docosahexaenoic acid (DHA — approximately 375 mg). The empirical formula of EPA ethyl ester is C 22 H 34 O 2 , and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is: The empirical formula of DHA ethyl ester is C 24 H 36 O 2 , and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is: Omega-3-Acid Ethyl Esters Capsules USP also contain the following inactive ingredients: 4 mg alpha-tocopherol, gelatin, glycerin, hypromellose, propylene glycol, and titanium dioxide. Chemical Structure Chemical Structure

The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The empirical formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3. structure

Oxcarbazepine is an antiepileptic drug available as 150 mg, 300 mg, and 600 mg film-coated tablets for oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5 H -dibenz[b, f ]azepine-5-carboxamide, and its structural formula is: Oxcarbazepine is a white to faintly orange crystalline powder. It is slightly soluble in chloroform, dichloromethane, acetone, and methanol and practically insoluble in ethanol, ether and water. Its molecular weight is 252.27 g/mol. Oxcarbazepine film-coated tablets contain the following inactive ingredients: microcrystalline cellulose, crospovidone, hypromellose, colloidal silicon dioxide, magnesium stearate, talc. Coating: polyvinyl alcohol, talc, titanium dioxide, polyethylene glycol, Contains FD&C Yellow No. 6 as a color additive. FD&C Yellow No. 6 aluminum lake, lecithin, FD&C Blue No. 2 aluminum lake, Contains FD&C Yellow No. 5 as a color additive. [See WARNINGS AND PRECAUTIONS (5.12)]. FD&C Yellow No. 5 aluminum lake. Allergen Statement: This product contains soy. Oxcarbazepine Tablets, USP complies with USP Dissolution Test 2. Chemical Structure

Paroxetine tablets, USP contains paroxetine hydrochloride USP, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)- trans -4 R -(4'-fluorophenyl)-3 S -[(3',4'- methylenedioxyphenoxy) methyl] piperidine hydrochloride anhydrous and has the empirical formula of C 19 H 20 FNO 3 ·HCl. The molecular weight is 365.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 116°C to 120°C and a solubility of 5.4 mg/mL in water. Each film-coated tablet, for oral administration, contains paroxetine hydrochloride equivalent to paroxetine as follows: 10 mg; 20 mg; 30 mg; 40 mg. Inactive ingredients consist of anhydrous lactose, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, sodium starch glycolate and titanium dioxide. Paroxetine tablets comply with USP Related Impurities Test 1. structure

Pazopanib is a kinase inhibitor. Pazopanib is presented as the hydrochloride salt, with the chemical name 5-[[4-[(2,3-Dimethyl-2 H -indazol-6-yl)methylamino]pyrimidin-2-yl]amino]-2-methylbenzenesulfonamide monohydrochloride. It has the molecular formula C 21 H 23 N 7 O 2 S·HCl and a molecular weight of 473.98 g/mol. Pazopanib hydrochloride has the following chemical structure: Pazopanib hydrochloride is a white to slightly yellow solid. It is very slightly soluble in aqueous solutions, being practically insoluble above pH 4. Pazopanib tablets are for oral use. Each 200-mg tablet of pazopanib tablets contains 200 mg of pazopanib equivalent to 216.7 mg of pazopanib hydrochloride. The inactive ingredients of pazopanib tablets are: Tablet Core: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. Coating: Gray film-coat: hydroxypropyl cellulose, hydroxypropyl methylcellulose, iron oxide black, polyethylene glycol 8000, and titanium dioxide. structuure.jpg

Perphenazine (4-[3-(2-chlorophenothiazin-10-yl)propyl]-1-piperazineethanol), a piperazinyl phenothiazine, having the molecular formula, C 21 H 26 CIN 3 OS. It is available as oral tablets containing 2 mg, 4 mg, 8 mg, and 16 mg of perphenazine. Its structural formula is: Perphenazine is a white or yellowish-white crystalline powder. It is practically insoluble in water; freely soluble in alcohol and in chloroform; soluble in acetone. Each film-coated perphenazine tablet intended for oral administration contains 2 mg, 4 mg, 8 mg and 16 mg of perphenazine. In addition, each tablet contains the following inactive ingredients: corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Additionally, each film-coated perphenazine tablet contains opadry II white 03B28796 which contains hypromellose, polyethylene glycol and titanium dioxide. figure

Phenytoin is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is 5,5-diphenyl-2,4 imidazolidinedione, having the following structural formula: Each extended phenytoin sodium capsule, USP for oral administration contains 100 mg phenytoin sodium, USP. Also contains confectioner's sugar, hypromellose, lactose monohydrate, magnesium stearate, and talc. The capsule shell contains benzyl alcohol, black ink, butylparaben, D&C Yellow #10, edetate calcium disodium, FD&C Red #3, gelatin, methylparaben, propylparaben, sodium lauryl sulfate, sodium propionate, and titanium dioxide. Product in vivo performance is characterized by a slow and extended rate of absorption with peak blood concentrations expected in 4 to 12 hours as contrasted to Prompt Phenytoin Sodium Capsules, USP with a rapid rate of absorption with peak blood concentration expected in 1½ to 3 hours. Meets USP Dissolution Test 2. Chemical Structure

Pirfenidone belongs to the chemical class of pyridone. Pirfenidone tablets are available as film-coated tablets containing 267 mg (yellow) and 801 mg (brown) pirfenidone. Pirfenidone has a molecular formula of C 12 H 11 NO and a molecular weight of 185.22 g/mol. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1­ phenyl-2-1(H)-pyridone or 5-methyl-1-phenyl-2-(1H)-pyridinone. Pirfenidone is a white to pale yellow, non-hygroscopic powder. It is freely soluble in methanol, ethyl alcohol, acetone and chloroform. Sparingly soluble in 1 N hydrochloric acid, water and 0.1 N sodium hydroxide. The melting point is approximately 106°C to 112°C. Pirfenidone tablets, USP contain pirfenidone and the following inactive ingredients: colloidal silicon dioxide, ferric ferrous oxide (801 mg only), ferric oxide red (801 mg only), ferric oxide yellow (267 mg only), hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium starch glycolate, talc and titanium dioxide. Structure.jpg

Pitavastatin tablets for oral use is an HMG-CoA reductase inhibitor. The chemical name for pitavastatin is (+)monocalcium bis {(3R, 5S, 6 E )-7-[2-cyclopropyl-4-(4-fluorophenyl)-3-quinolyl]-3,5- dihydroxy-6-heptenoate}. The structural formula is: The empirical formula for pitavastatin is C 50 H 46 CaF 2 N 2 O 8 and the molecular weight is 880.98. Pitavastatin is odorless and occurs as white to pale-yellow powder. It is freely soluble in pyridine, chloroform, dilute hydrochloric acid, and tetrahydrofuran, soluble in ethylene glycol, sparingly soluble in octanol, slightly soluble in methanol, very slightly soluble in water or ethanol, and practically insoluble in acetonitrile or diethyl ether. Pitavastatin is hygroscopic and slightly unstable in light. Each film-coated pitavastatin tablet contains 1.045 mg, 2.09 mg, or 4.18 mg of pitavastatin calcium, which is equivalent to 1 mg, 2 mg, or 4 mg, respectively of free base and the following inactive ingredients: lactose monohydrate, magnesium carbonate, low-substituted hydroxypropyl cellulose, hypromellose and magnesium stearate. The film coating contains: hypromellose, polyethylene glycol, talc and titanium dioxide. Chemical Structure

Posaconazole delayed-release tablets are an azole antifungal agent. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3 R ,5 R )-5- (2,4-difluorophenyl)tetrahydro-5- (1 H -1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1 S ,2 S )-1-ethyl-2-hydroxypropyl]-2,4-dihydro-3 H -1,2,4-triazol-3-one with an empirical formula of C 37 H 42 F 2 N 8 O 4 and a molecular weight of 700.8. The chemical structure is: Posaconazole is a white powder with a low aqueous solubility. Posaconazole delayed-release tablets are yellow, modified, oval, convex tablets containing 100 mg of posaconazole. Each delayed-release tablet contains the inactive ingredients: Hypromellose Acetate Succinate, Microcrystalline Cellulose, Hydroxypropyl Cellulose, Croscarmellose Sodium, Silicon Dioxide, and Magnesium Stearate. The color coating contains (Polyvinyl Alcohol, Titanium Dioxide, Polyethylene Glycol, Talc, Ferric Oxide Yellow, and Ferrosoferric Oxide). Chemical Structure

Potassium citrate is a citrate salt of potassium. Its molecular formula is K 3 C 6 H 5 O 7 • H 2 O, and it has the following chemical structure: Potassium citrate, USP is a transparent crystals or white, granular powder. It is freely soluble in water and slightly soluble in alcohol. Potassium citrate extended-release tablets, USP intended for oral administration, each contains 5 mEq (540 mg), 10 mEq (1,080 mg) or 15 mEq (1,620 mg) of potassium citrate, USP as monohydrate. In addition, each tablet contains the following inactive ingredients: carnauba wax and magnesium stearate. Meets USP Dissolution Test 2 figure

Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S) -2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C 10 H 17 N 3 S · 2HCl · H 2 O, and its molecular weight is 302.27. The structural formula is: Pramipexole dihydrochloride is a white to almost white crystalline powder. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole Dihydrochloride is freely soluble in water, soluble in methanol, sparingly soluble to slightly soluble in ethanol (96%) and practically insoluble in methylene chloride. Pramipexole dihydrochloride tablets 0.125 mg: Each tablet contains 0.125 mg pramipexole dihydrochloride monohydrate equivalent to 0.118 mg pramipexole dihydrochloride. Pramipexole dihydrochloride tablets 0.25 mg: Each tablet contains 0.25 mg pramipexole dihydrochloride monohydrate equivalent to 0.235 mg pramipexole dihydrochloride. Pramipexole dihydrochloride tablets 0.5 mg: Each tablet contains 0.5 mg pramipexole dihydrochloride monohydrate equivalent to 0.47 mg pramipexole dihydrochloride. Pramipexole dihydrochloride tablets 0.75 mg: Each tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride tablets 1 mg: Each tablet contains 1 mg pramipexole dihydrochloride monohydrate equivalent to 0.94 mg pramipexole dihydrochloride. Pramipexole dihydrochloride tablets 1.5 mg: Each tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of pramipexole dihydrochloride tablets consist of mannitol, corn starch, colloidal silicon dioxide, povidone, and magnesium stearate. Structural formula

Prasugrel tablets, USP contain prasugrel, a thienopyridine class inhibitor of platelet activation and aggregation mediated by the P2Y 12 ADP receptor. Prasugrel tablets are formulated as the hydrochloride salt, a racemate, which is chemically designated as 5-[(1RS)-2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl]-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2-yl acetate hydrochloride. Prasugrel hydrochloride has the molecular formula C 20 H 20 FNO 3 S•HCl representing a molecular weight of 409.90. The chemical structure of prasugrel hydrochloride is: Prasugrel hydrochloride, USP is a white to light brown crystalline solid. It is soluble at pH 2, slightly soluble at pH 3 to 4, and practically insoluble at pH 6 to 7.5. It also dissolves freely in methanol and is slightly soluble in 1- and 2-propanol and acetone. It is practically insoluble in diethyl ether and ethyl acetate. Prasugrel tablets are available for oral administration as 5 mg or 10 mg capsule shaped, film-coated, unscored tablets, debossed on each side. Each yellow 5 mg tablet is manufactured with 5.49 mg prasugrel hydrochloride, equivalent to 5 mg prasugrel and each brown 10 mg tablet with 10.98 mg prasugrel hydrochloride, equivalent to 10 mg of prasugrel. Other ingredients include crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, mannitol, pregelatinized starch (corn), sucrose stearic acid esters, titanium dioxide, triacetin and yellow iron oxide. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain black iron oxide and red iron oxide. Meets USP Dissolution Test 2. Prasugrel Hydrochloride Structural Formula

Pravastatin sodium is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-2-methyl-8-(2-methyl-1-oxobutoxy)-β,δ,6-trihydroxy-,monosodium salt, [1S- [1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula: Pravastatin sodium is white to off-white powder. It is a relatively polar hydrophilic compound with a partition coefficient (n-octanol/water) of 0.59. It is soluble in water (676 mg/mL). Pravastatin sodium is available for oral administration as 10 mg, 20 mg, 40 mg, and 80 mg tablets. Inactive ingredients include: Croscarmellose sodium, lactose Monohydrate, magnesium oxide, magnesium stearate, microcrystalline cellulose, and povidone. Chemical Struture

Pregabalin is described chemically as ( S )-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8 H 17 NO 2 and the molecular weight is 159.23. The chemical structure of pregabalin is: Pregabalin is a white to off-white, crystalline powder with a pK a1 of 4.2 and a pK a2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is - 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide. Chemical Structure

Anticonvulsant Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1 H ,5 H )-pyrimidinedione. Structural formula: Primidone is a white, crystalline, highly stable substance, M.P. 279 - 284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Each tablet, for oral administration, contains either 50 mg or 250 mg of primidone. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, methylcellulose, acacia, sodium starch glycolate, and magnesium stearate. primidone-molecular-structure

Progesterone capsules contain micronized progesterone for oral administration. Progesterone has a molecular weight of 314.47 and a molecular formula of C 21 H 30 O 2 . Progesterone (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is: Progesterone is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain 100 mg or 200 mg micronized progesterone. The inactive ingredients for progesterone capsules 100 mg include: ferric oxide yellow, gelatin, glycerin, lecithin, peanut oil, and titanium dioxide. The inactive ingredients for progesterone capsules 200 mg include: gelatin, glycerin, lecithin, peanut oil, and titanium dioxide. chemical structure

Propafenone Hydrochloride Tablets USP are an antiarrhythmic drug supplied in scored, film-coated tablets of 150 mg, 225 mg and 300 mg for oral administration. Propafenone has some structural similarities to beta-blocking agents. Chemically, propafenone hydrochloride is 2’-[2-hydroxy-3-(propylamino)-propoxy]-3-phenylpropiophenone hydrochloride, with a molecular weight of 377.92. The molecular formula is C 21 H 27 NO 3 •HCl. The structural formula of propafenone hydrochloride is given below: Propafenone hydrochloride occurs as colorless crystals or white crystalline powder with a very bitter taste. It is slightly soluble in water (20°C), chloroform, and ethanol. The following inactive ingredients are contained in the tablet: corn starch, croscarmellose sodium, hypromellose, maltodextrin, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, silicon dioxide colloidal, titanium dioxide, and triacetin. structure

Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as (±)-1-(Isopropylamino)-3-(1-naphthyloxy)-2-propanolol hydrochloride. Its molecular and structural formulae are: Propranolol hydrochloride, USP is a stable, white to off-white, crystalline powder which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, or 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets are: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 10 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake, the 20 mg tablets also contain FD&C Blue No. 1 Aluminum Lake, the 40 mg tablets also contain FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake and D&C Yellow No. 10 Aluminum Lake, the 60 mg tablets also contain FD&C Blue No. 1 Aluminum Lake and FD&C Red No. 40 Aluminum Lake and the 80 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and D&C Yellow No. 10 Aluminum Lake. Structural Formula

PROVIGIL (modafinil) is a wakefulness‑promoting agent for oral administration. Modafinil is a racemic compound. The chemical name for modafinil is 2‑[(diphenylmethyl)sulfinyl]acetamide. The molecular formula is C 15 H 15 NO 2 S and the molecular weight is 273.35. The chemical structure is: Modafinil is a white to off-white, crystalline powder that is practically insoluble in water and cyclohexane. It is sparingly to slightly soluble in methanol and acetone. PROVIGIL tablets contain 100 mg or 200 mg of modafinil and the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and pregelatinized starch. Chemical_image.jpg

Pyridostigmine bromide tablets, USP are an orally active cholinesterase inhibitor. Chemically, pyridostigmine bromide is 3-hydroxy-1-methylpyridinium bromide dimethylcarbamate. Its structural formula is: Pyridostigmine bromide, USP is a white or almost white crystalline, deliquescent powder. It is very soluble in water and in alcohol, slightly soluble in hexane, practically insoluble in ether. Each pyridostigmine bromide tablet, USP intended for oral administration contains 60 mg of pyridostigmine bromide, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, low substituted hydroxypropyl cellulose, silicon dioxide and stearic acid. figure

Quetiapine extended-release tablets are an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b,f ] [1,4] thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42 H 50 N 6 O 4 S 2 •C 4 H 4 O 4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is: Quetiapine fumarate, USP is a white to off-white crystalline powder which is soluble in 0.1N hydrochloric acid, slightly soluble in water, in alcohol, and in methanol. Quetiapine extended-release tablets,USP are supplied for oral administration as 50 mg (peach), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets are lactose monohydrate, microcrystalline cellulose, sodium citrate dihydrate, hypromellose, and magnesium stearate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose, polyethylene glycol 400 and titanium dioxide. In addition, yellow iron oxide (50 mg, 200 mg and 300 mg tablets) and red iron oxide (50 mg tablets) are included in the film coating of specific strengths. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 172.7 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.38 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.5 mg of quetiapine fumarate equivalent to 400 mg quetiapine. FDA approved dissolution test specifications differ from USP. structural formula

Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [ b , f ] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C 42 H 50 N 6 O 4 S 2 •C 4 H 4 O 4 and it has a molecular weight of 883.10 (fumarate salt). The structural formula is: Quetiapine fumarate USP is a white to off-white powder which is moderately soluble in water. Quetiapine Tablets USP are available for oral administration containing either 25 mg, 50 mg, 100 mg, 200 mg, 300 mg or 400 mg of quetiapine fumarate. Each 25 mg tablet contains the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, povidone, purified water and sodium starch glycolate. The 50 mg, 100 mg, 200 mg, 300 mg and 400 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, purified water and sodium starch glycolate. Each 25 mg tablet contains 28.75 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.5 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.0 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.0 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.0 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.0 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Each tablet meets the requirements of the Test 3 Dissolution in the USP monograph for Quetiapine Tablets USP. chem.jpg

The active ingredient in Rabeprazole Sodium Delayed-Release Tablets is rabeprazole sodium, which is a proton pump inhibitor. It is a substituted benzimidazole known chemically as 2-[[[4-(3-methoxypropoxy)-3-methyl-2-pyridinyl]-methyl]sulfinyl]-1 H- benzimidazole sodium salt. It has an empirical formula of C 18 H 20 N 3 NaO 3 S and a molecular weight of 381.42. Rabeprazole sodium is a white to slightly yellowish-white solid. It is very soluble in water and methanol, freely soluble in ethanol, chloroform, and ethyl acetate and insoluble in ether and n-hexane. The stability of rabeprazole sodium is a function of pH; it is rapidly degraded in acid media, and is more stable under alkaline conditions. The structural figure is: Figure 1 Rabeprazole Sodium Delayed-Release Tablets are available for oral administration as delayed-release, enteric-coated tablets containing 20 mg of rabeprazole sodium. Inactive ingredients of the 20 mg tablet are crospovidone, FD&C Blue #1, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, talc and triethyl citrate. Figure 1

Ramelteon tablets are orally active hypnotic chemically designated as ( S )- N -[2-(1,6,7,8-tetrahydro-2 H -indeno-[5,4- b ]furan-8-yl)ethyl]propionamide and containing one chiral center. The compound is produced as the ( S )-enantiomer, with an empirical formula of C 16 H 21 NO 2 , molecular weight of 259.34, and the following chemical structure: Ramelteon is freely soluble in organic solvents, such as methanol, ethanol, and dimethyl sulfoxide; soluble in 1-octanol and acetonitrile; and very slightly soluble in water and in aqueous buffers from pH 3 to pH 11. Each Ramelteon tablet includes the following inactive ingredients: lactose monohydrate, corn starch, hydroxypropyl cellulose, magnesium stearate, opadry yellow and purified water. Chemical Structure

Risperidone Tablets contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets are available in 0.25 mg (dark yellow), 0.5 mg (reddish brown), 1 mg (white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. Inactive ingredients are colloidal silicon dioxide, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, propylene glycol, starch (corn), talc and titanium dioxide. The 0.25 mg tablets contain yellow iron oxide; the 0.5 mg tablets contain red iron oxide; the 2 mg tablets contain FD&C Yellow No. 6 Aluminum Lake; the 3 mg and 4 mg tablets contain D&C Yellow No. 10 Aluminum Lake; the 4 mg tablets contain FD&C Blue No. 2 Aluminum Lake. risperidone

Rizatriptan benzoate orally disintegrating tablets USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine 1B/1D (5-HT 1B/1D ) receptor agonist. Rizatriptan benzoate is described chemically as: N,N -dimethyl-5-(1 H -1,2,4-triazol-1-ylmethyl)-1 H ­-indole-3-ethanamine monobenzoate and its structural formula is: Its molecular formula is C 15 H 19 N 5 •C 7 H 6 O 2 , representing a molecular weight of the free base of 269.35. Rizatriptan benzoate is a white to almost white crystalline powder that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate orally disintegrating tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains the following inactive ingredients: aspartame, crospovidone, mannitol, microcrystalline cellulose, peppermint, pregelatinized starch (maize), and sodium stearyl fumarate. Meets USP Dissolution Test 2. Chemical Structure

Rizatriptan benzoate tablets USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine 1B/1D (5-HT 1B/1D ) receptor agonist. Rizatriptan benzoate is described chemically as: N,N -dimethyl-5-(1 H -1,2,4-triazol-1-ylmethyl)-1 H ­-indole-3-ethanamine monobenzoate and its structural formula is: Its molecular formula is C 15 H 19 N 5 •C 7 H 6 O 2 , representing a molecular weight of the free base of 269.35. Rizatriptan benzoate is a white to almost white crystalline powder that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: corn starch, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized starch (maize). Chemical Structure

The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its empirical formula is C 17 H 14 Cl 2 F 2 N 2 O 3 and the molecular weight is 403.22. The chemical structure is: The drug substance is a white or practically white crystalline powder with a melting point of 160°C. It is practically insoluble in water and hexane, sparingly soluble in ethanol, and freely soluble in acetone. Roflumilast tablets is supplied as white to off-white, round shaped, uncoated tablets debossed with “R” on one side and “250” or “500” on the other side. Each tablet contains 250 mcg and 500 mcg of roflumilast. Each tablet of roflumilast tablets for oral administration contains the following inactive ingredients: lactose monohydrate, maize starch, hypromellose, and magnesium stearate. rof01

Selegiline hydrochloride is a levorotatory acetylenic derivative of phenethylamine. It is commonly referred to in the clinical and pharmacological literature as l-deprenyl. The chemical name is: (R)-(-)- N ,2-dimethyl- N -2-propynylphenethylamine hydrochloride. It is a white to near white crystalline powder, freely soluble in water, chloroform, and methanol, and has a molecular weight of 223.75. The molecular formula is C 13 H 17 •HCl. The structural formula is as follows: Each tablet, for oral administration, contains 5 mg selegiline hydrochloride. Inactive ingredients are citric acid, anhydrous lactose, magnesium stearate, and microcrystalline cellulose. structure

The active ingredient in sevelamer carbonate tablet is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate a, b = number of primary amine groups a + b = 9 c = number of cross-linking groups c = 1 m = large number to indicate extended polymer network Sevelamer carbonate Tablets: Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are ammonium hydroxide, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, lecithin, mannitol, polyvinyl alcohol, propylene glycol, shellac, talc, xanthan gum and zinc stearate. The tablet imprint contains iron oxide black ink. figure1

Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is butanedioic acid, compounded with (1 S )-(3 R )-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1 H )-iso-quinolinecarboxylate (1:1) having an empirical formula of C 23 H 26 N 2 O 2 •C 4 H 6 O 4 , and a molecular weight of 480.55. The structural formula of solifenacin succinate is: Solifenacin succinate is a white to light yellow powder. It is freely soluble at room temperature in water, and ethanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, and titanium dioxide with yellow ferric oxide (5 mg solifenacin succinate tablet) or red ferric oxide (10 mg solifenacin succinate tablet). structure of Solifenacin succinate

Sorafenib, a kinase inhibitor, is the tosylate salt of sorafenib. Sorafenib tosylate has the chemical name 4-(4-{3-[4-Chloro-3-(trifluoromethyl)phenyl]ureido}phenoxy)N2-methylpyridine-2-carboxamide 4 methylbenzenesulfonate. The molecular formula of sorafenib tosylate is C21H16ClF3N4O3 x C7H8O3S and the molecular weight of sorafenib tosylate is 637.0 g/mole. Its​ structural formula is: : Sorafenib tosylate is a white to yellowish or brownish solid. Sorafenib tosylate is practically insoluble in aqueous media, slightly soluble in ethanol and soluble in PEG 400. Sorafenib Tablets, USP for oral use is supplied as film-coated tablets containing 200 mg sorafenib equivalent to 274 mg sorafenib tosylate and the following inactive ingredients: croscarmellose sodium, ferric oxide red, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulphate, and titanium dioxide. FDA approved dissolution test specifications differ from USP. structural formula of Sorafenib tosylate

Sotalol hydrochloride/Sotalol hydrochloride AF tablets, USP contains sotalol hydrochloride, an antiarrhythmic drug with Class II (beta­-adrenoreceptor blocking) and Class III (cardiac action potential duration prolongation) properties. Sotalol hydrochloride tablets, USP are supplied as a white to off-white, capsule-shaped, scored tablet for oral administration. Sotalol hydrochloride AF is supplied as a white to off-white, capsule-shaped, scored tablet for oral administration. Sotalol hydrochloride is a white, crystalline solid with a molecular weight of 308.8 g/mol. It is hydrophilic, soluble in water, propylene glycol and ethanol, but is only slightly soluble in chloroform. Chemically, sotalol hydrochloride is d,l- N -[4-[1-hydroxy-2-[(1-methylethyl) amino]ethyl]phenyl]methane-sulfonamide monohydrochloride. The molecular formula is C 12 H 20 N 2 O 3 S∙HCl and is represented by the following structural formula: Each Sotalol Hydrochloride tablet, USP/Sotalol Hydrochloride AF tablets, USP for oral administration, contains 80 mg, 120 mg, 160 mg or 240 mg of sotalol hydrochloride. In addition, each tablet also contains the following inactive ingredients: magnesium stearate and microcrystalline cellulose. Structure.jpg

Sucralfate is an α-D-glucopyranoside, β-D-fructofuranosyl-, octakis-(hydrogen sulfate), aluminum complex. It has the following structural formula: Tablets for oral administration contain 1 g of sucralfate, USP. Also contain: povidone, magnesium stearate, and colloidal silicon dioxide. Therapeutic category: antiulcer. Sucralfate Tablets contain sucralfate and sucralfate is an α-D-glucopyranoside, β-D-fructofuranosyl-, octakis-(hydrogen sulfate), aluminum complex.

Sulfamethoxazole and trimethoprim tablets are a synthetic antibacterial combination product available in DS (double strength) tablets, each containing 800 mg sulfamethoxazole and 160 mg trimethoprim; in tablets, each containing 400 mg sulfamethoxazole and 80 mg trimethoprim for oral administration. Sulfamethoxazole is N 1 -(5-methyl-3-isoxazolyl) sulfanilamide; the molecular formula is C 10 H 11 N 3 O 3 S. It is an almost white, odorless, tasteless compound with a molecular weight of 253.28 and the following structural formula: Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl) pyrimidine; the molecular formula is C 14 H 18 N 4 O 3 . It is a white to light yellow, odorless, bitter compound with a molecular weight of 290.3 and the following structural formula: Inactive ingredients: Docusate sodium 85%, sodium benzoate 15%, sodium starch glycolate, magnesium stearate and pregelatinized starch. Chemical Structure chemical structure

Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT 1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(Dimethylamino)ethyl]- N -methylindole-5-methanesulfonamide succinate (1:1), and it has the following structure: The molecular formula is C 14 H 21 N 3 O 2 S•C 4 H 6 O 4 , representing a molecular weight of 413.5. Sumatriptan succinate, USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet for oral administration contains 35, 70, or 140 mg of sumatriptan succinate, USP equivalent to 25, 50, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium lauryl sulfate, titanium dioxide and triacetin. Meets USP Dissolution Test 2. Sumatriptan Structural Formula

Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as (‒)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone monohydrate. The chemical structure of tacrolimus is: Tacrolimus has a molecular formula of C 44 H 69 NO 12 •H 2 O and a formula weight of 822.03. Tacrolimus, USP appears as a white to off-white powder. It is insoluble in water, very soluble in ethanol, and soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. Inactive ingredients include anhydrous lactose, black iron oxide, colloidal silicon dioxide, croscarmellose sodium, gelatin, hypromellose, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The 0.5 mg capsules also contain D&C Red No. 28, D&C Yellow No. 10 and FD&C Red No. 40, the 1 mg capsules also contain FD&C Blue No. 1 and FD&C Red No. 3 and the 5 mg capsules also contain D&C Red No. 33, D&C Red No. 28 and D&C Yellow No. 10. In addition, the black imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Meets USP Dissolution Test 5. Tacrolimus Structural Formula