eywa pharma inc - Medication Listings

Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C 8 H 9 NO 2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C 18 H 21 NO 3 H 3 PO 4 ½H 2 O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only). codeine-01 codeine-02

Acetazolamide, an inhibitor of the enzyme carbonic anhydrase is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1,3,4-thiadiazol-2-yl) acetamide and has the following chemical structure: Acetazolamide is available as oral tablets containing 125 mg and 250 mg of acetazolamide respectively and the following inactive ingredients: dibasic calcium phosphate dihydrate, corn starch, crospovidone, povidone, purified water and magnesium stearate. molecular-str

The active ingredient in alosetron tablets, USP is alosetron hydrochloride (HCl), USP a potent and selective antagonist of the serotonin 5-HT3 receptor type. Chemically, alosetron is designated as 2,3,4,5-tetrahydro-5-methyl-2-[(5-methyl-1H-imidazol-4­ yl)methyl]-1H-pyrido[4,3-b]indol-1-one, monohydrochloride. Alosetron is achiral and has the empirical formula C 17 H 18 N 4 O•HCl, representing a molecular weight of 330.8. Alosetron is a white to pale brown colored powder that has a solubility of 66.82 mg/mL in water, 83.34 mg/mL in 0.1N hydrochloric acid, 74.65 mg/mL in pH 6.8 phosphate buffer, and 60.79 mg/mL in pH 8.0 phosphate buffer. The chemical structure of alosetron is: Alosetron Tablets USP are supplied for oral administration as 0.5 mg (white) and 1 mg (white) tablets. The 0.5 mg tablet contains 0.562 mg alosetron hydrochloride, USP equivalent to 0.5 mg alosetron, and the 1 mg tablet contains 1.124 mg alosetron hydrochloride, USP equivalent to 1 mg of alosetron. Each tablet also contains the inactive ingredients lactose (anhydrous), magnesium stearate, microcrystalline cellulose, and pregelatinized starch. The white film coat for the 0.5 mg tablet contains hypromellose, titanium dioxide, macrogol and triacetin. The white film coat for the 1 mg tablet contains hypromellose, titanium dioxide, macrogol and triacetin. alo-str.jpg

Brompheniramine maleate, pseudoephedrine hydrochloride, and dextromethorphan hydrobromide syrup, 2 mg/30 mg/10 mg per 5 mL is a clear, light pink syrup with a butterscotch flavour. Each 5 mL (1 teaspoonful) contains: Brompheniramine Maleate, USP 2 mg Pseudoephedrine Hydrochloride, USP 30 mg Dextromethorphan Hydrobromide, USP 10 mg Alcohol 0.95% v/v In a palatable, aromatic vehicle. Inactive Ingredients: artificial butterscotch flavor, citric acid anhydrous, alcohol, FD&C Red No. 40, glycerin, sucrose, methylparaben, propylene glycol, purified water and sodium benzoate. It may contain 10% citric acid solution or 10% sodium citrate solution for pH adjustment. The pH range is between 4.0 and 6.0. Brompheniramine Maleate, USP(±)-2- p -Bromo-α-2-(dimethylamino)ethylbenzylpyridine maleate (1:1) Pseudoephedrine Hydrochloride, USP (+)-Pseudoephedrine hydrochloride Dextromethorphan Hydrobromide, USP 3-Methoxy-17-methyl-9α, 13α, 14α-morphinan hydrobromide monohydrate Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration. bromfed-str1 bromfed-str2 bromfed-str3

Carbamazepine USP, is an anticonvulsant and specific analgesic for trigeminal neuralgia, available for oral administration as extended-release tablets of 100, 200, and 400 mg. Its chemical name is 5H-dibenz[b,f]azepine-5-carboxamide, and its structural formula is: Carbamazepine USP is a white to off-white powder, practically insoluble in water and soluble in alcohol and in acetone. Its molecular weight is 236.27. Inactive Ingredients: Hypromellose, hydroxyethyl cellulose, cellulose acetate, mannitol, dextrates, sodium lauryl sulfate, magnesium stearate, polyethylene glycol 400, polyethylene glycol 8000, opacode S-1-17823 black ink (contains: shellac glaze, iron oxide black, propylene glycol, ammonium hydroxide 28%). FDA approved dissolution method differs from that of the USP. Tegretol, carbamazepine structural formula

Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/300 mg contains: Hydrocodone Bitartrate .................................................................................................................5 mg Acetaminophen...........................................................................................................................300 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/300 mg contains: Hydrocodone Bitartrate ............................................................................................................7.5 mg Acetaminophen ........................................................................................................................300 mg Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/300 mg contains: Hydrocodone Bitartrate .............................................................................................................10 mg Acetaminophen.........................................................................................................................300 mg In addition, each tablet contains the following inactive ingredients: pregelatinized starch, colloidal silicon dioxide, povidone, crospovidone, croscarmellose sodium, stearic acid, microcrystalline cellulose, magnesium stearate, and FD&C Yellow # 6 Aluminum Lake (5 mg/300 mg only), and FD&C Blue # 1 Aluminum Lake (10 mg/300 mg only). This product complies with USP dissolution test 2. hydrocodone bitartrate chemical structure acetaminophen chemcial structure

Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non- salicylate analgesic and antipyretic. It has the following structural formula: Each Hydrocodone Bitartrate and Acetaminophen Tablet USP, 5 mg/325 mg contains: Hydrocodone Bitartrate………………………..5 mg Acetaminophen……………………………….325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet USP, 7.5 mg/325 mg contains: Hydrocodone Bitartrate………………………..7.5 mg Acetaminophen……………………………….325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet USP, 10 mg/325 mg contains: Hydrocodone Bitartrate………………………..10 mg Acetaminophen……………………………….325 mg In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, FD&C yellow#6 aluminum lake (5 mg/325 mg only), and FD&C blue#1 aluminum lake (10 mg/325 mg only). Meets USP Dissolution Test 2. hydroc-struct aceto-struct

Hydrocodone bitartrate and acetaminophen are available in liquid form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: C 18 H 21 NO 3 • C 4 H 6 O 6 • 2½H 2 O M. W. 494.490 Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non- opiate, non- salicylate analgesic and antipyretic. It has the following structural formula: C 8 H 9 NO 2 M. W. 151.16 Hydrocodone bitartrate and acetaminophen oral solution contains: Per 5 mL Per 15 mL Hydrocodone Bitartrate 2.5 mg 7.5 mg Acetaminophen 108.0 mg 325.0 mg Ethyl Alcohol, USP (190 Proof) 7% 7% In addition, the liquid contains the following inactive ingredients: citric acid anhydrous, ethyl maltol, glycerin, methylparaben, propylene glycol, propylparaben, purified water, saccharin sodium, sorbitol solution, sucrose, with D&C Red #33 and FD&C Red #40 as coloring and natural and artificial flavoring. hydro-str aceta-str

Hydrocortisone Tablets, USP contain hydrocortisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Hydrocortisone, USP is white to practically white, odorless, crystalline powder with a melting point of about 215° C. It is very slightly soluble in water and in ether; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for hydrocortisone is pregn-4-ene-3,20-dione,11,17,21-trihydroxy-, (11β)-. Its molecular weight is 362.46 and the structural formula is as outlined below. Hydrocortisone Tablets, USP are available for oral administration in three strengths: each tablet contains either 5 mg, 10 mg, or 20 mg of hydrocortisone, USP. Inactive ingredients: calcium stearate, corn starch, lactose monohydrate, sorbic acid, sucrose. FDA approved dissolution test specifications differ from USP. ACTIONS Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli. str

Labetalol Hydrochloride Tablets, USP contain labetalol hydrochloride, an adrenergic receptor blocking agent that has both selective alpha 1 adrenergic and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride is a racemate chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride, and it has the following structural formula: Labetalol hydrochloride has the empirical formula C 19 H 24 N 2 O 3 •HCl and a molecular weight of 364.9. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride is a white or off-white crystalline powder, soluble in water. Labetalol Hydrochloride Tablets, USP contain 100 mg, 200 mg, or 300 mg of labetalol hydrochloride and are for oral administration. The tablets also contain the inactive ingredients lactose monohydrate, magnesium stearate, pregelatinized corn starch, sodium starch glycolate. FDA approved dissolution test specifications differ from USP. struct

Methylphenidate hydrochloride oral solution contains methylphenidate hydrochloride a CNS stimulant. It is available as an oral solution in 5 mg/5 mL and 10 mg/5 mL strengths for oral administration. Chemically, methylphenidate hydrochloride is ( d,l (racemic) methyl α-phenyl-2-piperidineacetate hydrochloride and its structural formula is: Methylphenidate hydrochloride USP is a white to off white, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Each mL of methylphenidate hydrochloride oral solution 5 mg/5 mL contains 1 mg of methylphenidate hydrochloride USP. Each mL of methylphenidate hydrochloride oral solution 10 mg/5 mL contains 2 mg of methylphenidate hydrochloride USP. Methylphenidate hydrochloride oral solution also contains the following inactive ingredients: glycerin, polyethylene glycol 1450, concord grape flavor N&A, diluted hydrochloric acid (10%), and purified water. Structure

Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg Inactive Ingredients The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: 01 02

Oxycodone Hydrochloride Oral Solution is an opioid agonist, available as clear yellow solution in 100 mg/5 mL (20 mg/mL) strength for oral administration. Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6one hydrochloride and has the following structural formula: C18H21NO4.HCl MW 351.82 Oxycodone hydrochloride, USP is a white to off-white fine crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). The inactive ingredients in Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) include: citric acid anhydrous, D&C Yellow #10, mixed berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbitol. oxy-str.jpg

Oxycodone hydrochloride oral solution is an opioid agonist, available as solution in 5 mg/5mL (1 mg/mL) strength for oral administration. Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6one hydrochloride and has the following structural formula: C 18 H 21 NO 4 •HCl MW 351.82 Oxycodone hydrochloride, USP is a white to off-white fine crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Oxycodone hydrochloride oral solution USP, 5 mg per 5 mL contains equivalent of 4.5 mg of oxycodone free base per 5 mL and contains the following inactive ingredients: sorbitol solution, saccharin sodium, anhydrous citric acid, sodium citrate dihydrate, sodium benzoate, FD&C red #40, mixed berry flavor, and purified water. oxycodone-struct

Quinidine is an antimalarial schizonticide and an antiarrhythmic agent with Class Ia activity; it is the d-isomer of quinine, and its molecular weight is 324.43. Quinidine gluconate is the gluconate salt of quinidine; its chemical name is cinchonan-9-ol, 6'-methoxy-, (9S)-, mono-D-gluconate; its structural formula is: Its empirical formula is C 20 H 24 N 2 O 2 • C 6 H 12 O 7 , and its molecular weight is 520.58, of which 62.3% is quinidine base. Each quinidine gluconate extended-release tablet contains 324 mg of quinidine gluconate (202 mg of quinidine base) in a matrix to provide extended-release; the inactive ingredients include corn starch, hydroxypropyl methylcellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide, alcohol and sodium alginate. Meets USP Dissolution Test 6. struct

Ursodiol Capsules, USP are a bile acid available as 300 mg capsules suitable for oral administration. Ursodiol (ursodeoxycholic acid) is a naturally occurring bile acid found in small quantities in normal human bile and in the biles of certain other mammals. It is a white or almost white crystalline powder freely soluble in alcohol and in glacial acetic acid, sparingly soluble in chloroform, slightly soluble in ether; practically insoluble in water. The chemical name for ursodiol is 3α,7β-Dihydroxy-5β-cholan-24-oic acid (C 24 H 40 O 4 ). Ursodiol has a molecular weight of 392.57. Its structure is shown below: Each capsule contains 300 mg of ursodiol with the following inactive ingredients: Pregelatinized starch, Silicon Dioxide, Magnesium Stearate and Hard Gelatin capsule shell. Capsule shell contains iron oxide red, iron oxide yellow, titanium dioxide and gelatin. The imprinting ink contains the following: Shellac, Dehydrated Alcohol, Isopropyl Alcohol, Butyl Alcohol, Propylene Glycol, Strong Ammonia Solution, Black Iron Oxide and Potassium Hydroxide. urso-struc.jpg