endo usa, inc. - Medication Listings

Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 , a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula: Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder consisting of the active ingredient, levothyroxine sodium, and the excipients dibasic sodium phosphate heptahydrate, USP; mannitol, USP; and sodium hydroxide, NF in single dose amber glass vials. Levothyroxine Sodium for Injection is available at three dosage strengths: 100 mcg per vial, 200 mcg per vial and 500 mcg per vial. levot-struc-01.jpg

LIDOCAINE PATCH 5% is comprised of an adhesive material containing 5% lidocaine, which is applied to a non‑woven polyester felt backing and covered with a polyethylene terephthalate (PET) film release liner. The release liner is removed prior to application to the skin. The size of the patch is 10 cm x 14 cm. Lidocaine is chemically designated as acetamide, 2‑(diethylamino)‑N‑(2,6‑ dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure: Each adhesive patch contains 700 mg of lidocaine (50 mg per gram adhesive) in an aqueous base. It also contains the following inactive ingredients: dihydroxyaluminum aminoacetate, disodium edetate, gelatin, glycerin, kaolin, methylparaben, polyacrylic acid, polyvinyl alcohol, propylene glycol, propylparaben, sodium carboxymethylcellulose, sodium polyacrylate, D-sorbitol, tartaric acid, and urea. Chemical Structure

Methylprednisolone tablets, USP contain methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)- and the molecular weight is 374.48. The structural formula is represented below: Each methylprednisolone tablet, USP for oral administration contains 4 mg of methylprednisolone, USP. Inactive ingredients: magnesium stearate, microcrystalline cellulose and sodium starch glycolate. This is an image of the structural formula of methylprednisolone.

Methylprednisolone Acetate Injectable Suspension, USP is a sterile anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains: Methylprednisolone acetate 40 mg 80 mg Polyethylene glycol 3350 29.1 mg 28.2 mg Polysorbate 80 1.94 mg 1.88 mg Monobasic sodium phosphate 6.8 mg 6.59 mg Dibasic sodium phosphate USP 1.42 mg 1.37 mg Benzyl alcohol added as a preservative 9.16 mg 8.88 mg Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11ß)- and the molecular weight is 416.51. The structural formula is represented below: Methylprednisolone Acetate Injectable Suspension, USP contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. Figure 1

Midodrine hydrochloride is a vasopressor/antihypotensive. The chemical name for midodrine hydrochloride is acetamide, 2-amino- N -[2-(2,5-dimethoxyphenyl)-2-hydroxyethyl]-, monohydrochloride, (±)-. The molecular weight of midodrine hydrochloride is 290.7. Its structural formula and molecular formula are: Midodrine hydrochloride, USP is an odorless, white, crystalline powder. It is soluble in water and sparingly soluble in methanol and has a pKa of 7.8 (0.3% aqueous solution) and a pH of 3.5 to 5.5 (5% aqueous solution). It has a melting range of 200° to 203°C. Each midodrine hydrochloride tablet, USP for oral administration contains 2.5 mg, 5 mg or 10 mg of midodrine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, pregelatinized starch (maize) and stear-o-wet M (magnesium stearate and sodium lauryl sulphate). MIDODRINE HYDROCHLORIDE

Minoxidil tablets contain minoxidil, an antihypertensive peripheral vasodilator. Minoxidil occurs as a white to off-white, odorless, crystalline solid that is soluble in water to the extent of approximately 2 mg/mL, is readily soluble in propylene glycol or ethanol, and is almost insoluble in acetone, chloroform or ethyl acetate. The chemical name for minoxidil is 2,4-pyrimidinediamine, 6-(1-piperidinyl)-, 3-oxide. The structural formula is represented at right: C 6 H 15 N 5 O MW 209.25 Minoxidil tablets for oral administration contain either 2.5 mg or 10 mg of minoxidil. Inactive ingredients include colloidal silicon dioxide, corn starch, lactose anhydrous, magnesium stearate and microcrystalline cellulose. this is the chemical structure

Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has a molecular formula of C 23 H 31 NO 7 , a molecular weight of 433.50, and the following structural formula: MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 μg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1 -octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate mofetil for injection is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has a molecular formula of C 23 H 31 NO 7 HC1 and a molecular weight of 469.96. Mycophenolate mofetil for injection is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial of mycophenolate mofetil for injection contains mycophenolate mofetil hydrochloride equivalent to 500 mg of mycophenolate mofetil. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of mycophenolate mofetil to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a clear colorless to slightly yellow color solution of MMF, 6 mg/mL [see Dosage and Administration ( 2.6 )]. Chemical Structure

Cyanocobalamin is a synthetic form of vitamin B 12 . The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.35%. The molecular formula is C 63 H 88 CoN 14 O 14 P, which corresponds to a molecular weight of 1355.38 and the following structural formula: Figure 1. Nascobal Chemical Structure Cyanocobalamin occurs as dark red crystals or orthorhombic needles or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly to moderately soluble in water (1:80). Its pharmacologic activity is destroyed by heavy metals (iron) and strong oxidizing or reducing agents (vitamin C), but not by autoclaving for short periods of time (15-20 minutes) at 121°C. The vitamin B 12 coenzymes are very unstable in light. NASCOBAL (cyanocobalamin) nasal spray is a solution of cyanocobalamin, USP (vitamin B 12 ) for administration as a spray to the nasal mucosa. Each single-use device of NASCOBAL NASAL SPRAY contains 0.125 mL of a 500 mcg/0.1 mL solution of cyanocobalamin with, benzalkonium chloride in purified water, citric acid, glycerin and sodium citrate. The spray solution has a pH between 4.5 and 5.5. Each spray delivers an average of 500 mcg of cyanocobalamin per actuation. Image-1

Nitisinone capsules contains nitisinone, which is a hydroxyphenyl-pyruvate dioxygenase inhibitor indicated as an adjunct to dietary restriction of tyrosine and phenylalanine in the treatment of hereditary tyrosinemia type 1 (HT-1). Nitisinone occurs as white to yellow colored powder. It is practically insoluble in water and sparingly soluble in 2M Sodium Hydroxide, Ethanol and Methanol. Chemically, nitisinone is 2-[2-nitro-4-(trifluoromethyl)benzoyl] cyclohexane-1,3-dione, and the structural formula is: Figure 1. The molecular formula is C 14 H 10 F 3 NO 5 with a relative mass of 329.23 Inert ingredients in the formulation are: citric acid anhydrous, hypromellose, mannitol and stearic acid. The empty hard gelatin capsules contains gelatin, sodium lauryl sulfate and titanium dioxide. The capsules shells are imprinted in edible ink which contains black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. structure

Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H- thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-­[(α,α,α-trifluoro- p -tolyl)oxy]propylamine hydrochloride. The molecular formula is C 17 H 18 F 3 NO•HCl, which corresponds to a molecular weight of 345.79. The chemical structures are: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations: 3 mg/25 mg 6 mg/25 mg 6 mg/50 mg 12 mg/25 mg 12 mg/50 mg Olanzapine 3 6 6 12 12 Fluoxetine base equivalent 25 25 50 25 50 Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol. This is the structure

Olmesartan medoxomil, amlodipine and hydrochlorothiazide provided as a tablet for oral administration, is a fixed combination of olmesartan medoxomil (ARB), amlodipine (CCB), and hydrochlorothiazide (thiazide diuretic). Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p-(o- 1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The amlodipine besylate component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20 H 25 CIN 2 O 5 •C 6 H 6 O 3 S. The hydrochlorothiazide component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzo-thiazidiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7 H 8 CIN 3 O 4 S 2 . The structural formula for olmesartan medoxomil is: The structural formula for amlodipine besylate is: The structural formula for hydrochlorothiazide is: Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets contains olmesartan medoxomil, a white to light yellowish-white powder or crystalline powder, amlodipine besylate, a white to off-white crystalline powder, and hydrochlorothiazide, a white or practically white, crystalline powder. The molecular weights of olmesartan medoxomil, amlodipine besylate, and hydrochlorothiazide tablets are 558.6, 567.1, and 297.7, respectively. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution. Each 20/5/12.5 mg tablet contains 20 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/25 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each 40/10/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/10/25 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each tablet of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, and magnesium stearate. The color coating for 20 /5 /12.5 mg, 40 /5 /25 mg tablets contains titanium dioxide, hypromellose, polyethylene glycol and polysorbate, the color coating for 40/10/25 mg and 40/5/12.5 mg tablets contains polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc and iron oxide red and the color coating for 40 /10 /12.5 mg tablets polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc iron oxide yellow and FD&C #6. Olmesartan medoxomil Amlodipine besylate Hydrochlorothiazide

Penicillamine is a chelating agent used in the treatment of Wilson's disease. It is also used to reduce cystine excretion in cystinuria and to treat patients with severe, active rheumatoid arthritis unresponsive to conventional therapy (see INDICATIONS ). It is 3-mercapto-D-valine. It is a white or practically white, crystalline powder, freely soluble in water, slightly soluble in alcohol, and insoluble in ether, acetone, benzene, and carbon tetrachloride. Although its configuration is D, it is levorotatory as usually measured: [α] 25° = -62.5° ± 2° (c = 1, 1N NaOH), D calculated on a dried basis. The empirical formula is C 5 H 11 NO 2 S, giving it a molecular weight of 149.21. The structural formula is: It reacts readily with formaldehyde or acetone to form a thiazolidine-carboxylic acid. Penicillamine capsules, USP for oral administration contain 250 mg of penicillamine. Each capsule contains the following inactive ingredients: lactose monohydrate and magnesium stearate. In addition, the empty hard gelatin capsule shells also contain D & C yellow 10, gelatin and titanium dioxide. The capsules are printed with tek ink containing black iron oxide, potassium hydroxide, titanium dioxide and shellac. chem-stru

Penicillamine is 3-mercapto-D-valine, a disease modifying antirheumatic drug. It is a white or practically white, crystalline powder, freely soluble in water, slightly soluble in alcohol, and insoluble in ether, acetone, benzene, and carbon tetrachloride. Although its configuration is D, it is levorotatory as usually measured: [α]25° = -62.5° ± 2.0° (C = 1, 1 N NaOH) D The empirical formula is C 5 H 11 NO 2 S, giving it a molecular weight of 149.21. The structural formula is: It reacts readily with formaldehyde or acetone to form a thiazolidine-carboxylic acid. Penicillamine tablets, USP (Titratable Tablets) for oral administration contain 250 mg of penicillamine. Other ingredients (inactive): anhydrous lactose, copovidone, corn starch (maize), edetate disodium dihydrate, hypromellose, lactose monohydrate, magnesium stearate, magnesium trisilicate, polyethylene glycol, povidone and stearic acid. chemical-structure

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg All strengths of PERCOCET also contain the following inactive ingredients: Colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, povidone, pregelatinized cornstarch, and stearic acid. May also contain crospovidone. In addition, the 2.5 mg/325 mg strength contains FD&C Red No. 40 Aluminum Lake and the 5 mg/325 mg strength contains FD&C Blue No. 1 Aluminum Lake. The 7.5 mg/325 mg strength contains FD&C Yellow No. 6 Aluminum Lake. The 10 mg/325 mg strength contains D&C Yellow No. 10 Aluminum Lake. The 7.5 mg/325 mg strength and the 10 mg/325 mg strength may also contain corn starch. Oxycodone and Acetaminophen Tablets contain oxycodone, 14- hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: oxycodone hydrochloride chemical structure Acetaminophen Structural Formula

Perphenazine (4-[3-(2-chlorophenothiazin-10-yl)propyl]-1-piperazineethanol), a piperazinyl phenothiazine, having the chemical formula, C 21 H 26 CIN 3 OS. It is available as oral tablets containing 2 mg, 4 mg, 8 mg, and 16 mg of perphenazine. Inactive ingredients: black iron oxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium starch glycolate, talc, titanium dioxide, yellow iron oxide. Its structural formula is: This is the structual formula for Perphenazine.

The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula: Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. This is the image of the structual formula for Phenobarbital.

Pimozide is an orally active antipsychotic agent of the diphenyl-butylpiperidine series. The structural formula of pimozide, 1-[1-[4,4-bis(4-fluorophenyl)butyl]-4-piperidinyl]-1,3-dihydro-2H-benzimidazole-2-one is: The solubility of pimozide in water is less than 0.01 mg/mL; it is slightly soluble in most organic solvents. Each white pimozide tablet contains either 1 mg or 2 mg of pimozide and the following inactive ingredients: calcium stearate, microcrystalline cellulose, lactose anhydrous and corn starch. PIMOZIDE-STRUCTURE.jpg

Posaconazole is an azole antifungal agent. Posaconazole is available as an injection solution to be diluted before intravenous administration. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3 R ,5 R )-5- (2,4-difluorophenyl)tetrahydro-5- (1 H- 1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1 S ,2 S )-1-ethyl-2- hydroxypropyl]-2,4-dihydro- 3H -1,2,4-triazol-3-one with an empirical formula of C 37 H 42 F 2 N 8 O 4 and a molecular weight of 700.8. The chemical structure is: Posaconazole is a white powder with a low aqueous solubility. Posaconazole Injection Posaconazole injection is available as a clear colorless to yellow, sterile liquid essentially free of foreign matter. Each vial contains 300 mg of posaconazole and the following inactive ingredients: 6.68 g Sulfobutyl-Ether-β-Cyclodextrin Sodium Salt (SBECD), 0.0033 g edetate disodium, hydrochloric acid and sodium hydroxide to adjust the pH to 2.6, and water for injection. Posaconazole chemical structure

Posaconazole is an azole antifungal agent available as delayed-release tablet or suspension for oral administration. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3 R ,5 R )-5- (2,4-difluorophenyl)tetrahydro-5- (1 H -1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1 S ,2 S )-1-ethyl-2-hydroxypropyl]-2,4-dihydro-3 H -1,2,4-triazol-3-one with an empirical formula of C 37 H 42 F 2 N 8 O 4 and a molecular weight of 700.8. The chemical structure is: Posaconazole Delayed-Release Tablets Posaconazole is a white powder with a low aqueous solubility. Posaconazole delayed-release tablet is a yellow, coated, oblong tablet containing 100 mg of posaconazole. Each delayed-release tablet contains the inactive ingredients: croscarmellose sodium, hydroxypropylcellulose, hypromellose acetate succinate, iron oxide yellow, Macrogol/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol partially hydrolyzed, silicon dioxide, talc, and titanium dioxide. Posaconazole Oral Suspension Posaconazole oral suspension is a white, cherry-flavored immediate-release suspension containing 40 mg of posaconazole per mL and the following inactive ingredients: artificial cherry flavor, citric acid monohydrate, glycerin, liquid glucose, polysorbate 80, purified water, simethicone, sodium benzoate, sodium citrate dihydrate, titanium dioxide, and xanthan gum. Chemical Structure

Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Oral Solution: 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, natural/artificial orange flavor, purified water, sodium benzoate, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, natural/artificial orange flavor, purified water, sodium benzoate, sodium citrate dihydrate, sucralose.

Potassium Chloride is a white crystalline or colorless solid. It is soluble in water and slightly soluble in alcohol. Chemically, Potassium Chloride is K-Cl with a molecular mass of 74.55. Each pouch of light pink to orange powder contains 1.5 g of potassium chloride, USP, which is equivalent to potassium 20 mEq and chloride 20 mEq and the following inactive ingredients: citric acid anhydrous, colloidal silicon dioxide, FD&C Yellow #6, natural and artificial orange flavor, and sucralose.

Praziquantel, USP is an anthelmintic, trematodicide provided in tablet form for oral administration. Praziquantel, USP is 2-(cyclohexylcarbonyl)-1,2,3,6,7,11b-hexahydro-4H-pyrazino[2,1-a] isoquinolin-4-one with the molecular formula; C 19 H 24 N 2 O 2 . The structural formula is as follows: Praziquantel, USP is a white or almost white crystalline powder. The compound is stable under normal conditions and melts at 136°C to 142°C. The active substance is non-hygroscopic. Praziquantel, USP is freely soluble in ethanol (96 per cent) and in methylene chloride, practically insoluble in water. Praziquantel tablets, USP contain 600 mg of praziquantel, USP. Inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, sodium lauryl sulfate, polyethylene glycol, titanium dioxide and hypromellose. chm-str

Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its molecular and structural formulae are: Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and ethanol. Its molecular weight is 295.80. Propranolol hydrochloride is available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. This is the formula for Propranolol Hydrochloride. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow #10 (10 mg, 40 mg and 80 mg tablets), FD&C Blue #1 (20 mg tablet), FD&C Blue #2 (40 mg tablet), FD&C Red #40 (60 mg tablet), FD&C Yellow #6 (10 mg and 80 mg tablets), magnesium stearate, and microcrystalline cellulose.

Propylthiouracil is one of the thiocarbamide compounds. It is a white, crystalline substance that has a bitter taste and is very slightly soluble in water. Propylthiouracil is an antithyroid drug administered orally. The structural formula is: Each tablet contains propylthiouracil 50 mg and the following inactive ingredients: corn starch, docusate sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium benzoate, and sodium starch glycolate. Propylthiouracil structural formula

QUESTRAN ® (Cholestyramine for Oral Suspension USP), the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in QUESTRAN is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of QUESTRAN powder. Four grams of anhydrous cholestyramine resin is contained in 5 grams of QUESTRAN LIGHT. It is represented by the following structural formula: QUESTRAN powder contains the following inactive ingredients: acacia, citric acid, D&C Yellow No. 10, FD&C Yellow No.6, flavor (natural and artificial Orange), polysorbate 80, propylene glycol alginate and sucrose. QUESTRAN LIGHT contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Red No.40, flavor (natural and artificial Orange), maltodextrin, propylene glycol alginate and xanthan gum. this is the structure

Risperidone Orally Disintegrating Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCI. Risperidone Orally Disintegrating Tablets, USP are available in 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg and 4 mg strengths and are white in color. Risperidone Orally Disintegrating Tablets, USP contain the following inactive ingredients: aspartame, croscarmellose sodium, crospovidone, magnesium stearate, maltodextrin, mannitol, methacrylic acid polymer with divinylbenzene, modified food starch, silicon dioxide, sorbitol, talc, tartaric acid, and natural grapefruit flavor. This product meets USP Disintegration Test 2. risperidone-orally-disintegrating-tablet-7.jpg

Sapropterin dihydrochloride is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in sapropterin dihydrochloride powder for oral solution, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2-dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C 9 H 15 N 5 O 3 ·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula: Sapropterin dihydrochloride is supplied as powder for oral solution containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base). Sapropterin dihydrochloride powder for oral solution is off-white to lightly yellow in color. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose. chem-stru

Sapropterin dihydrochloride is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in sapropterin dihydrochloride powder for oral solution, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is a white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2-dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C 9 H 15 N 5 O 3 ·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula: Sapropterin dihydrochloride is supplied as powder for oral solution containing 500 mg of sapropterin dihydrochloride (equivalent to 384 mg of sapropterin base). Sapropterin dihydrochloride powder for oral solution is off-white to lightly yellow in color. Each unit dose packet contains the following inactive ingredients: ascorbic acid, mannitol, potassium citrate and sucralose. chem-str

Sapropterin dihydrochloride tablets is an orally administered Phenylalanine Hydroxylase activator (or PAH activator). Sapropterin dihydrochloride, the active pharmaceutical ingredient in sapropterin dihydrochloride tablets, is a synthetic preparation of the dihydrochloride salt of naturally occurring tetrahydrobiopterin (BH4). Sapropterin dihydrochloride is white to off-white crystalline powder. The chemical name of sapropterin dihydrochloride is (6R)-2-amino-6-[(1R,2S)-1,2­ dihydroxypropyl]-5,6,7,8-tetrahydro-4(1H)-pteridinone dihydrochloride and the molecular formula is C 9 H 15 N 5 O 3 ·2HCl with a molecular weight of 314.17. Sapropterin dihydrochloride has the following structural formula: Sapropterin dihydrochloride is supplied as tablets containing 100 mg of sapropterin dihydrochloride (equivalent to 76.8 mg of sapropterin base). Tablets are off-white to light yellow, mottled, uncoated, round shaped tablets debossed with ‘P’ on one side and ‘720’ on other side. Each tablet contains the following inactive ingredients: ascorbic acid, colloidal silicon dioxide, copovidone, crospovidone, dibasic calcium phosphate anhydrous, mannitol, riboflavin and sodium stearyl fumarate. sapropterin-dihydrochloride-tablets-2.jpg

Sodium phenylbutyrate powder, USP nasogastric, or gastrostomy tube administration contain Sodium phenylbutyrate, USP. Sodium phenylbutyrate powder is an off-white crystalline substance which is soluble in water and has a strong salty taste. Sodium phenylbutyrate, USP also is freely soluble in methanol and practically insoluble in acetone and diethyl ether. It is known chemically as 4-phenylbutyric acid, sodium salt with a molecular weight of 186 and the molecular formula C 10 H 11 O 2 Na. Chemical Structure: Each gram of Sodium phenylbutyrate powder, USP contains 0.94 grams of sodium phenylbutyrate, USP and the inactive ingredients calcium stearate NF and colloidal silicon dioxide NF. sodiumphenylbutyrate

Sodium Phenylbutyrate Tablets, USP for oral administration contain Sodium phenylbutyrate, USP. Sodium Phenylbutyrate, USP is an off-white crystalline substance which is soluble in water and has a strong salty taste. Sodium Phenylbutyrate, USP also is freely soluble in methanol and practically insoluble in acetone and diethyl ether. It is known chemically as 4-phenylbutyric acid, sodium salt with a molecular weight of 186 and the molecular formula C 10 H 11 O 2 Na. Chemical Structure: Each tablet of Sodium Phenylbutyrate Tablets, USP contains 500 mg of Sodium Phenylbutyrate, USP and the inactive ingredients calcium stearate NF, colloidal silicon dioxide NF, magnesium stearate and microcrystalline cellulose. sodium-phenyl

SUPPRELIN LA is a sterile, non-biodegradable, diffusion-controlled, hydrogel polymer reservoir containing histrelin acetate, a synthetic nonapeptide analog of the naturally occurring gonadotropin releasing hormone (GnRH) possessing a greater potency than the natural sequence hormone. SUPPRELIN LA is designed to deliver approximately 65 mcg histrelin acetate per day over 12 months. The SUPPRELIN LA implant looks like a small thin flexible tube and consists of a 50-mg histrelin acetate drug core inside a 3.5 cm by 3 mm, cylindrical, hydrogel polymer reservoir (Figure 1). The implant may appear partially to completely full with variation in color from off-white to light brown. The color may be uneven within the core. Figure 1: SUPPRELIN LA Implant Diagram (not to scale) The chemical name of histrelin acetate is: L-Pyroglutamyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-N-benzyl-D-histidyl-L-leucyl-L-arginyl-L-proline N-ethylamide, acetate salt. The molecular formula for histrelin acetate is C 66 H 86 N 18 O 12 x 2 CH 3 COOH and its molecular weight is 1443.70 (or 1323.52 as free base). Histrelin is also chemically described as 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-Nt-benzyl-D-histidyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide diacetate. The chemical structure of the free base (histrelin) is represented below in Figure 2. Figure 2: Structure of Histrelin The drug core also contains the inactive ingredient stearic acid NF. The hydrogel polymer reservoir is a hydrophilic cartridge composed of 2-hydroxyethyl methacrylate, 2-hydroxypropyl methacrylate, trimethylolpropane trimethacrylate, benzoin methyl ether, Perkadox-16, and Triton X-100. Each implant is packaged hydrated in a glass vial containing 2 mL of sterile 1.8% sodium chloride solution, so that it is primed for immediate release of the drug upon insertion. A single use, sterile, Insertion Tool is provided along with the implant that can be used for the placement of the SUPPRELIN LA implant into the subcutaneous tissue of the inner aspect of the upper arm. The Insertion Tool is enclosed in a sterile bag and is provided separately from the implant in the Implantation Kit [ see Recommended Procedure for Implant Insertion and Removal ( 2.2 ) ]. hydrogel figure Chemical Structure

TESTIM (testosterone gel) is a clear to translucent hydroalcoholic topical gel containing testosterone, an androgen. TESTIM provides continuous transdermal delivery of testosterone for 24 hours, following a single application to intact, clean, dry skin of the shoulders and/or upper arms. One 5-g or two 5-g tubes of TESTIM contains 50 mg or 100 mg of testosterone, respectively, to be applied daily to the skin’s surface. Approximately 10% of the applied testosterone dose is absorbed across skin of average permeability during a 24-hour period. The active pharmacological ingredient in TESTIM is testosterone. Testosterone USP is a white to practically white crystalline powder chemically described as 17-β hydroxyandrost-4-en-3-one. The structural formula is shown in the following figure: Testim may have an alcoholic/musk odor. Inactive ingredients in TESTIM are purified water, pentadecalactone, carbopol, acrylates, propylene glycol, glycerin, polyethylene glycol, ethanol (74%), and tromethamine. Chemical Structure of testosterone

TESTOPEL ® (testosterone pellets) are cylindrically shaped pellets 3.2mm (1/8 inch) in diameter and approximately 9mm in length. Each sterile pellet weighs approximately 78mg (75mg testosterone) and is ready for implantation. Androgens are steroids that develop and maintain primary and secondary male sex characteristics. Testosterone is a member of this class. Structural formula for testosterone follows: INGREDIENTS Each TESTOPEL ® (testosterone pellets) for subcutaneous implantation contains 75mg testosterone. In addition each pellet contains the following inactive ingredients: stearic acid NF 0.97mg and polyvinylpyrrolidone USP 2mg. TESTOPEL ® (testosterone pellets) consist of crystalline testosterone. When implanted subcutaneously, the pellets slowly release the hormone for a long acting androgenic effect. this is an image of the chemical structure for testosterone.

Theophylline Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2, 6-dione, 3, 7-dihydro-1, 3-dimethyl-, and is represented by the following structural formula: The molecular formula of anhydrous theophylline is C 7 H 8 N 4 O 2 with a molecular weight of 180.17. Theo-24 is available as capsules intended for oral administration, containing 100 mg, 200 mg, 300 mg, or 400 mg of anhydrous theophylline per capsule, in an extended-release formulation which allows a 24-hour dosing interval for appropriate patients. Inactive ingredients are edible ink (which contains synthetic black iron oxide, FD&C Blue No. 1, FD&C Blue No. 2, FD&C Yellow No. 6, D&C Yellow No. 10, FD&C Red No. 40), ethylcellulose, gelatin, pharmaceutical glaze, colloidal silicon dioxide, starch, sucrose, talc, titanium dioxide, and coloring agents: 100 mg - includes FD&C Yellow No. 6; 200 mg - FD&C Red No. 3 and D&C Yellow No. 10; 300 mg - FD&C Blue No. 1 and FD&C Red No. 40; 400 mg - FD&C Red No. 40 and D&C Red No. 28. Theo-24 Extended-release capsules meet Drug Release Test 6 as published in the current USP monograph for Theophylline Extended-release Capsules. This the structural formula for anhydrous theophylline.

Tiopronin delayed-release tablets are a reducing and cystine-binding thiol drug (CBTD) for oral use. Tiopronin is N-(2-Mercaptopropionyl) glycine and has the following structure: Tiopronin has the molecular formula C 5 H 9 NO 3 S and a molecular weight of 163.19. In this drug product tiopronin exists as a dl racemic mixture. Tiopronin is a white to off-white color crystalline powder, which is freely soluble in water. Each tiopronin delayed-release tablet contains 100 mg or 300 mg of tiopronin. The inactive ingredients in tiopronin delayed-release tablets include anhydrous lactose, colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropylcellulose low substitute, hypromellose, magnesium stearate, methacrylic acid and ethyl acrylate copolymer, talc, triethyl citrate. Imprinting ink contains ammonium hydroxide, iron oxide red, propylene glycol, shellac and simethicone. Tiopronin

Tolvaptan is (±)-4'-[(7-chloro-2,3,4,5-tetrahydro-5-hydroxy-1 H -1-benzazepin-1-yl) carbonyl]- o -tolu- m -toluidide. The empirical formula is C 26 H 25 ClN 2 O 3 . Molecular weight is 448.94. The chemical structure is: Tolvaptan tablets for oral use contain 15 mg or 30 mg of tolvaptan. Inactive ingredients include corn starch, FD&C Blue #2/indigo carmine aluminum lake, hydroxypropyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate and microcrystalline cellulose. chem-stru

Topiramate, USP, is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules are available as 200 mg capsules for oral administration. Topiramate is a white to off-white powder. Topiramate is freely soluble in polar organic solvents such as acetonitrile and acetone; and very slightly soluble to practically insoluble in non-polar organic solvents such as hexanes. Topiramate has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.4. Topiramate is designated chemically as 2,3:4,5-Di- O -isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate extended-release capsules are an extended-release capsule. Topiramate extended-release capsules contain the following inactive ingredients: Sugar Spheres (contains sucrose and corn starch), Hypromellose, Povidone, Ethylcellulose, Titanium Dioxide, Talc. The capsule shells contain gelatin, titanium dioxide and colorants- FD&C Red #40, FD&C Yellow #6. Capsule shells are imprinted with black print that contains shellac, black iron oxide, propylene glycol, FD&C red #40, FD&C blue #2, FD&C blue #1 and D&C yellow #10. TOPIRAMATE ER CAPSULE

Topiramate, USP, is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules are available as 25 mg, 50 mg, 100 mg, and 200 mg capsules for oral administration. Topiramate is a white to off-white powder. Topiramate is freely soluble in polar organic solvents such as acetonitrile and acetone; and very slightly soluble to practically insoluble in non-polar organic solvents such as hexanes. Topiramate has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.4. Topiramate is designated chemically as 2,3:4,5-Di- O -isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate extended-release capsules are an extended-release capsule. Topiramate extended-release capsules contain the following inactive ingredients: Sugar Spheres (contains sucrose and corn starch) Hypromellose Povidone Ethylcellulose Titanium Dioxide Talc The capsule shells contain gelatin, titanium dioxide and colorants. The colorants are: Red Iron Oxide (50 mg and 100 mg capsules) FD&C Red #40 (200 mg capsules) FD&C Yellow #6 (25 mg, 100 mg and 200 mg capsules) All capsule shells are imprinted with black print that contains shellac, black iron oxide, propylene glycol, FD&C red #40, FD&C blue #2, FD&C blue #1 and D&C yellow #10 structure.jpg

Tretinoin is a retinoid. The chemical name is all-trans retinoic acid. The molecular formula is C 20 H 28 O 2 and the molecular weight is 300.44 g/mol. The structural formula is: It is a yellow to light orange, crystalline powder with melting point at about 182°C (with decomposition). Tretinoin is practically insoluble in water, sparingly soluble in methylene chloride, and slightly soluble in ethanol (96%). Tretinoin capsules are available as capsules containing 10 mg tretinoin for oral use. Each capsule also contains butylated hydroxyanisole, edetate disodium, soybean oil, hydrogenated vegetable oils, medium chain triglycerides, soya lecithin, and yellow beeswax. The gelatin capsule shell contains gelatin, glycerin, yellow iron oxide, red iron oxide and titanium dioxide. Capsules are printed with edible black ink, which consist of propylene glycol, iron oxide black, polyvinyl acetate phthalate and polyethylene glycol 400. The molecular formula for Tretinoin.

Trientine hydrochloride is N,N' -bis (2-aminoethyl)-1,2-ethanediamine dihydrochloride. It is a white to pale yellow crystalline hygroscopic powder. It is freely soluble in water, soluble in methanol, slightly soluble in ethanol, and insoluble in chloroform and ether. The empirical formula is C 6 H 18 N 4 •2HCl with a molecular weight of 219.2. The structural formula is: NH 2 (CH 2 ) 2 NH(CH 2 ) 2 NH(CH 2 ) 2 NH 2 •2HCl Trientine hydrochloride is a chelating compound for removal of excess copper from the body. Trientine hydrochloride is available as 250 mg capsules for oral administration. Trientine hydrochloride capsules USP, 250 mg contain stearic acid. In addition, the empty hard gelatin capsule shells contain gelatin, iron oxide black, iron oxide red, iron oxide yellow and titanium dioxide. The capsule shells are imprinted with TEK black ink containing butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.

Ursodiol Tablets, USP 250 mg are available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg are available as a scored film-coated tablet for oral administration. Ursodiol, USP (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is white or almost white crystalline powder freely soluble in ethanol, slightly soluble in acetone, and practically insoluble in Methylene chloride and water. The chemical name of ursodiol, USP is 3α,7ß-dihydroxy-5ß-cholan-24-oic acid (C 24 H 40 O 4 ). Ursodiol, USP has a molecular weight of 392.6. Its structure is shown below. Inactive ingredients: caprylic/capric triglycerides, copovidone, hypromellose, microcrystalline cellulose, magnesium stearate, povidone, polydextrose, polyethylene glycol 3350, sodium starch glycolate type A and titanium dioxide. ursodiol-structure.jpg

VALSTAR contains valrubicin (N-trifluoroacetyladriamycin-14-valerate), which is a semisynthetic analog of the anthracycline doxorubicin as a cytotoxic agent. The chemical name of valrubicin is (2 S - cis )-2-[1,2,3,4,6,11-hexahydro-2,5,12-trihydroxy-7-methoxy-6,11-dioxo-4-[[2,3,6-trideoxy-3-[(trifluoroacetyl)amino]-α-L- lyxo -hexopyranosyl]oxyl]-2-naphthacenyl]-2-oxoethylpentanoate. Valrubicin is an orange or orange-red powder that is highly lipophilic, soluble in methylene chloride, ethanol, methanol and acetone, and relatively insoluble in water. Its chemical formula is C 34 H 36 F 3 NO 13 and its molecular weight is 723.65. The chemical structure is shown in FIGURE 1. VALSTAR is intended for intravesical administration in the urinary bladder. It is supplied as a nonaqueous solution that should be diluted before intravesical administration. Each vial of VALSTAR contains 200 mg valrubicin at a concentration of 40 mg/mL in 5 mL of 50% polyoxyl castor oil/50% dehydrated alcohol, USP without preservatives or other additives. The solution is sterile and nonpyrogenic. FIGURE 1. Chemical Structure of Valrubicin

Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α 4 β 2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt of maltodextrin premix (1:1:10), is a powder which is a off-white to pinkish brown color with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano-6 H -pyrazino[2,3- h][3]benzazepine, (2 R ,3 R )-2,3-dihydroxybutanedioate with maltodextrin (1:1:10). It is soluble in water, practically insoluble in acetone and methylene dichloride. Varenicline tartrate has a molecular weight of 361.35 Daltons and maltodextrin, and a molecular formula of C 13 H 13 N 3 • C 4 H 6 O 6 and maltodextrin. The chemical structure is: Varenicline tablets are supplied for oral administration in two strengths: a 0.5 mg circular, biconvex, white to off-white film-coated tablets, debossed with “P” on one side and “155” on other side and a 1 mg circular, biconvex, light blue film-coated tablets, debossed with “P” on one side and “156” on other side. Each 0.5 mg varenicline tablet contains 0.85 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.71 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: croscarmellose sodium, maltodextrin, microcrystalline cellulose, stearic acid. The tablets are film-coated with a coating material containing hydroxypropyl cellulose, hypromellose, talc, and titanium dioxide. In addition to these, the 1 mg tablet film coating includes FD&C blue #2/indigo carmine aluminum lake and iron oxide yellow. chem-stru

Vigabatrin for oral solution, USP is an oral antiepileptic drug and is available as a white to off-white powder for oral solution in packets of 500 mg. The chemical name of vigabatrin, USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C 6 H 11 NO 2 and the molecular weight is 129.16. It has the following structural formula: Vigabatrin, USP is a white or almost white powder which is freely soluble in water, slightly soluble in methanol, practically insoluble in methylene chloride. The pH of a 1% aqueous solution is about 6.9. The n-octanol/water partition coefficient of vigabatrin, USP is about 0.011 (log P=- 1.96) at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pK a ) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Vigabatrin for oral solution, USP is available as a white to off-white powder. Each packet contains 500 mg of vigabatrin, USP. The inactive ingredient is povidone. Vigabatrin

XIAFLEX contains purified collagenase clostridium histolyticum, consisting of two microbial collagenases in a defined mass ratio, Collagenase AUX-I and Collagenase AUX-II, which are isolated and purified from the fermentation of Clostridium histolyticum bacteria. Collagenase AUX-I is a single polypeptide chain consisting of approximately 1000 amino acids of known sequence. It has an observed molecular weight of 114 kiloDaltons (kDa). It belongs to the class I Clostridium histolyticum collagenases. Collagenase AUX-II is a single polypeptide chain consisting of approximately 1000 amino acids of deduced sequence. It has an observed molecular weight of 113 kDa. It belongs to the class II Clostridium histolyticum collagenases. XIAFLEX is supplied as a sterile lyophilized powder (white cake) intended for reconstitution with the supplied sterile diluent (0.3 mg/mL calcium chloride dihydrate in 0.9% sodium chloride) prior to intralesional injection into a Dupuytren’s cord or a Peyronie’s plaque. XIAFLEX is available in single-use, glass vials containing 0.9 mg of collagenase clostridium histolyticum. Each vial also contains 0.5 mg of hydrochloric acid, 18.5 mg of sucrose, and 1.1 mg of tromethamine.

Zolpidem tartrate sublingual tablets contain zolpidem tartrate, USP a non-benzodiazepine hypnotic of the imidazopyridine class. Zolpidem tartrate sublingual tablets are available in 1.75 mg and 3.5 mg strength tablets for sublingual administration. Zolpidem tartrate sublingual tablets are intended to be placed under the tongue where they will disintegrate. Chemically, zolpidem tartrate, USP is N,N -6-trimethyl-2- p -tolylimidazo[1,2- α ]pyridine-3-acetamide L-(+)-tartrate (2:1). Zolpidem tartrate, USP is a white or almost white, crystalline, hygroscopic powder that is slightly soluble in water, sparingly soluble in methanol and practically insoluble in methylene chloride. It has a molecular weight of 764.9. Each zolpidem tartrate sublingual tablet includes the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, pregelatinized starch, mannitol, peppermint flavor, saccharin sodium and corn starch. ZOLPIDEM