elite laboratories, inc. - Medication Listings

Acetaminophen and codeine phosphate tablets are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C 8 H 9 NO 2 M.W. 151.16 Codeine phosphate, USP, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C 18 H 21 NO 3 •H 3 PO 4 •½H 2 O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/15 mg) contains: Acetaminophen, USP...........................300 mg Codeine Phosphate, USP.......................15 mg Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/30 mg) contains: Acetaminophen, USP...........................300 mg Codeine Phosphate, USP.......................30 mg Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/60 mg) contains: Acetaminophen, USP...........................300 mg Codeine Phosphate, USP.......................60 mg In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, sodium croscarmellose, and magnesium stearate.

The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene]amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is: Dantrolene Sodium is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains corn starch, lactose monohydrate, magnesium stearate, and talc. The capsule shell contains the following ingredients, D&C Yellow #10, FD&C Red #40, gelatin, titanium dioxide, and yellow iron oxide. Black ink contains the following ingredients, D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Blue #2 Aluminum lake, FD&C Red #40 Aluminum lake, n-Butyl alcohol, pharmaceutical glaze (modified) in SD-45, propylene glycol, SDA-3A alcohol and synthetic black iron oxide.

A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. EACH TABLET CONTAINS 5 mg 7.5 mg 10 mg 12.5 mg 15 mg 20 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 1.875mg 2.5 mg 3.125mg 3.75 mg 5 mg 7.5 mg Amphetamine Aspartate Monohydrate 1.25 mg 1.875mg 2.5 mg 3.125mg 3.75 mg 5 mg 7.5 mg Dextroamphetamine Sulfate, USP 1.25 mg 1.875mg 2.5 mg 3.125mg 3.75 mg 5 mg 7.5 mg Amphetamine Sulfate, USP 1.25 mg 1.875mg 2.5 mg 3.125mg 3.75 mg 5 mg 7.5 mg Total Amphetamine Base Equivalence 3.13 mg 4.7 mg 6.3 mg 7.8 mg 9.4 mg 12.6 mg 18.8 mg Inactive Ingredients: compressible sugar, magnesium stearate, maltodextrin, microcrystalline cellulose, sodium saccharin, and pregelatinized starch. Colors: Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets 5 mg, 7.5 mg and 10 mg contain FD&C Blue #1 Aluminum Lake. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets 12.5 mg, 15 mg, 20 mg and 30 mg contain FD&C Yellow #6 Aluminum Lake as a color additive.

Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contain mixed salts of a single-entity amphetamine, a CNS stimulant. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contains equal amounts (by weight) of four salts: dextroamphetamine sulfate, amphetamine sulfate, dextroamphetamine saccharate and amphetamine (D, L)-aspartate monohydrate. This results in a 3.1:1 mixture of dextro- to levo- amphetamine base equivalent. The 5 mg, 10 mg, 15 mg, 20 mg, 25 mg and 30 mg strength extended-release capsules are for oral administration. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contains two types of drug-containing beads (immediate-release and delayed release) which prolong the release of amphetamine compared to the dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate (immediate-release) tablet formulation. Each Capsule contains: Capsule Strength 5 mg 10 mg 15 mg 20 mg 25 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Amphetamine (D,L)- Aspartate Monohydrate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Dextroamphetamine Sulfate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Amphetamine Sulfate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Total amphetamine base equivalence 3.1 mg 6.3 mg 9.4 mg 12.5 mg 15.6 mg 18.8 mg d-amphetamine base equivalence 2.4 mg 4.7 mg 7.1 mg 9.5 mg 11.9 mg 14.2 mg l-amphetamine base equivalence 0.75 mg 1.5 mg 2.3 mg 3.0 mg 3.8 mg 4.5 mg Inactive Ingredients and Colors The inactive ingredients in dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules include: ferric oxide red, ferric oxide yellow, gelatin capsules, hypromellose 2910/3 cP, 6 cP and 50 cP, methacrylic acid and ethyl acrylate copolymer, titanium dioxide, polyethylene glycol, polysorbate 80, sugar spheres, talc, and triethyl citrate. The 5 mg gelatin capsules contain gelatin, titanium dioxide, D&C yellow #10, FD&C blue #1 and FD&C yellow #6. The 10 mg gelatin capsules contain gelatin, FD&C blue #1, and FD&C red #40. The 15 mg gelatin capsules contain gelatin, titanium dioxide, FD&C blue #1, and FD&C yellow #6. The 20 mg gelatin capsules contain gelatin, titanium dioxide, and FD&C red #3. The 25 mg gelatin capsules contain gelatin, FD&C red #40, and FD&C yellow #6. The 30 mg gelatin capsules contain gelatin, titanium dioxide, D&C red #28, and FD&C red #40. The ink ingredients are common for all strengths: the capsule imprint black ink contains FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, propylene glycol, and shellac.

Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan- 6-one tartrate (1:1) hydrate (2:5). It has the following structural formula: Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: Each Hydrocodone Bitartrate and Acetaminophen Tablet, 2.5 mg/325 mg contains: Hydrocodone Bitartrate .......... 2.5 mg Acetaminophen ...................... 325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains: Hydrocodone Bitartrate .......... 5 mg Acetaminophen ...................... 325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains: Hydrocodone Bitartrate ......... 7.5 mg Acetaminophen ...................... 325 mg Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains: Hydrocodone Bitartrate ........ 10 mg Acetaminophen ..................... 325 mg Inactive Ingredients The tablets contain: microcrystalline cellulose, talc, croscarmellose sodium, and magnesium stearate. Additional inactive ingredients from acetaminophen (90%) may contain pregelatinized starch, crospovidone, povidone, and stearic acid. Meets USP Dissolution Test 2.

Isradipine is a calcium antagonist available for oral administration in capsules containing 2.5 mg or 5 mg. The structural formula of isradipine is: Chemically, isradipine is 3,5-Pyridinedicarboxylic acid, 4-(4-benzofurazanyl)-1,4-dihydro-2,6-dimethyl-,methyl 1-methylethyl ester. Isradipine is a yellow, fine crystalline powder which is odorless or has a faint characteristic odor. Isradipine is practically insoluble in water (<10 mg/L at 37°C), but is soluble in ethanol and freely soluble in acetone, chloroform and methylene chloride. Active Ingredient: isradipine Inactive Ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, red iron oxide (5 mg), sodium lauryl sulfate, and titanium dioxide. Black ink contains the following ingredients: Black Iron Oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, n-Butyl Alcohol, Propylene Glycol, and Shellac Glaze in SD-45 Alcohol. Structural formula of Isradipine

Lisdexamfetamine Dimesylate Capsules, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino- N -[(1 S )-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C 15 H 25 N 3 O∙(CH 4 O 3 S) 2 , which corresponds to a molecular weight of 455.60. The chemical structure is: Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Chemical Structure Information for Lisdexamfetamine Dimesylate Capsules: Lisdexamfetamine Dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The capsule shells contain gelatin, titanium dioxide, shellac, black iron oxide and potassium hydroxide. In addition, the 10 mg capsule contains FD&C blue #1 and FD&C red #3; 20mg capsule contains iron oxide yellow; 30mg capsule contains FD&C red #3 and FD&C yellow #6; 40mg contains FD&C blue #1, iron oxide yellow and iron oxide black; 50mg and 60mg contains FD&C blue #1; and 70mg contains FD&C blue#1, FD&C red #3 and FD&C yellow #6.

Loxapine, a dibenzoxazepine compound, represents a subclass of tricyclic antipsychotic agents, chemically distinct from the thioxanthenes, butyrophenones, and phenothiazines. Chemically, it is 2-Chloro-11-(4-methyl-1-piperazinyl)dibenz[ b,f ][1,4]oxazepine. It is present as the succinate salt. Each capsule for oral administration, contains loxapine succinate, USP 6.8 mg, 13.6 mg, 34.0 mg or 68.0 mg equivalent to 5 mg, 10 mg, 25 mg or 50 mg of loxapine base respectively. It also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate and titanium dioxide. The 5 mg capsule contains FD&C Blue #1 and FD&C Yellow #6; the 10 mg capsule contains FDA/E172 Yellow Iron Oxide, FD&C Blue #1, D&C Yellow #10 and FD&C Yellow #6; the 25 mg capsule contains FDA/E172 Yellow Iron Oxide, FD&C Blue #1 and D&C Yellow #10; the 50 mg capsule contains FDA/E172 Yellow Iron Oxide and FD&C Blue #1. The ink ingredients are common for all strengths: the capsule imprint ink contains shellac glaze, ferrosoferric oxide, butyl alcohol, propylene glycol, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, D&C Yellow #10 Aluminum Lake, and FD&C Blue #1 Aluminum Lake.

Methadone Hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Methadone hydrochloride USP is a fine white powder. Its molecular formula is C 21 H 27 NO•HCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. It has the following structural formula: Methadone Hydrochloride Tablets are available for oral administration containing either 5 mg or 10 mg of methadone hydrochloride. Each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose and pregelatinized starch. Methadone HCl Structure

Methotrexate is dihydrofolate reductase inhibitor with the chemical name of N -[4-[[(2,4 diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid. The molecular formula is C 20 H 22 N 8 O 5 and the molecular weight is 454.45 g/mol. The structural formula is: Methotrexate Tablets for oral administration is available in bottles of 100 tablets. Each methotrexate tablet contains 2.5 mg methotrexate equivalent to 2.74 mg methotrexate sodium and the following inactive ingredients: StarLac (Lactose Monohydrate / Starch), and magnesium stearate. image-structure-methotrexate.jpg

Naltrexone hydrochloride, an opioid antagonist, are a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5a)-. The structural formula is as follows: C 20 H 23 NO 4 ∙HCl Molecular Weight: 377.86 Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone Hydrochloride Tablets USP are available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride. Naltrexone Hydrochloride Tablets USP also contain: carnauba wax powder, colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide and yellow iron oxide. Chemical Structure

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains oxycodone hydrochloride and acetaminophen in the following strengths: Oxycodone Hydrochloride, USP 5 mg* (*5 mg Oxycodone HCl is equivalent to 4.4815 mg of Oxycodone.) Acetaminophen, USP 325 mg Oxycodone Hydrochloride, USP 7.5 mg* (*7.5 mg Oxycodone HCl is equivalent to 6.7228 mg of Oxycodone.) Acetaminophen, USP 325 mg. Oxycodone Hydrochloride, USP 10 mg* (*10 mg Oxycodone HCl is equivalent to 8.9637 mg of Oxycodone.) Acetaminophen, USP 325 mg Inactive Ingredients The tablets contain: microcrystalline cellulose, talc, croscarmellose sodium, and magnesium stearate. Additional inactive ingredients from acetaminophen (90%) may contain pregelatinized starch, crospovidone, povidone, and stearic acid. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 •HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: C 18 H 21 NO 4 •HCl MW 351.82 Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: C 8 H 9 NO 2 MW 151.16 Opium Alkaloid- Thebaine Structure Acetaminophen Chemical Structure

Phendimetrazine tartrate, as the dextro isomer, has the chemical name of (2S,3S)-3,4-Dimethyl-2-phenylmorpholine L-(+)-tartrate (1:1). The structural formula is: Phendimetrazine tartrate is a white, odorless crystalline powder. It is freely soluble in water; sparingly soluble in warm alcohol, insoluble in chloroform, acetone, ether and benzene. In addition, the following inactive ingredients are present: colloidal silicon dioxide, D&C Yellow #10 Aluminum Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.

Phentermine hydrochloride USP is a sympathomimetic amine anorectic. It has the chemical name of α,α,-Dimethylphenethylamine hydrochloride. The structural formula is as follows: Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as a tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Each tablet contains the following inactive ingredients: starch, lactose anhydrous, microcrystalline cellulose, colloidal silicon dioxide, stearic acid, magnesium stearate and blue sugar spheres. Phentermine HCl Structure

Ropinirole extended-release tablets, USP, contains ropinirole, a non-ergoline dopamine agonist as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the molecular formula is C 16 H 24 N 2 O•HCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is: Ropinirole hydrochloride USP is a pale cream to light pinkish – yellow powder with a melting range of 243° to 250°C and a solubility of 133 mg/mL in water. Ropinirole extended-release tablets, USP, are formulated as a monolithic slow release matrix tablet with coating. Each biconvex, capsule-shaped tablet contains 2.28, 4.56, 6.84, 9.12, or 13.68 mg of ropinirole hydrochloride USP equivalent to ropinirole 2, 4, 6, 8, or 12 mg, respectively. Inactive ingredients consist of hypromellose, croscarmellose sodium, maltodextrin, lactose monohydrate, hydrogenated castor oil, colloidal silicon dioxide, magnesium stearate, and polyethylene glycol. Additionally, Lake Pigment HT 5516 FD&C Blue 1/Brill (sodium carbonate, sodium bicarbonate, FD&C Blue #1 and simethicone for 2 mg tablet), Lake Pigment HT 5284 Yellow 6 (sodium carbonate, sodium bicarbonate and FD&C Yellow #6 for 12 mg tablet), and ferric oxide red, ferric oxide yellow and ferrosoferric oxide (for 4 mg and 8 mg tablet). Meets USP Dissolution Test 4.

Trimipramine maleate is 5-(3-dimethylamino-2-methylpropyl)-10, 11-dihydro-5H-dibenz (b,f) azepine acid maleate (racemic form). Molecular Formula: C 20 H 26 N 2 • C 4 H 4 O 4 Molecular Weight: 410.5 Trimipramine maleate capsules contain trimipramine maleate equivalent to 25 mg, 50 mg or 100 mg of trimipramine as the base. Inactive Ingredients: Each capsule contains lactose monohydrate and magnesium stearate. The capsule shell contains the following ingredients: D&C Yellow 10 (25 mg and 50 mg), FD&C Blue #1 (25 mg, 50 mg and 100 mg), FD&C Red #40 (50 mg), gelatin, and titanium dioxide. The capsules are imprinted in black ink that contains: alcohol, D&C yellow No. 10 aluminum lake, FD&C blue No. 2/indigo carmine aluminum lake, FD&C blue No. 1/brilliant blue FCF aluminum lake, FD&C red No. 40/allura red AC aluminum lake, propylene glycol, iron oxide black and shellac glaze. Trimipramine maleate is prepared as a racemic mixture which can be resolved into levorotatory and dextrorotatory isomers. The asymmetric center responsible for optical isomerism is marked in the formula by an asterisk. Trimipramine maleate is an almost odorless, white or slightly cream-colored, crystalline substance, melting at 140°-144°C. It is very slightly soluble in ether and water, is slightly soluble in ethyl alcohol and acetone, and freely soluble in chloroform and methanol at 20°C. Structural Formula for Trimipramine Maleate