dr. reddy's laboratories inc. - Medication Listings

Chlorthalidone is an oral antihypertensive/diuretic. It is a monosulfamyl diuretic that differs chemically from thiazide diuretics in that a double-ring system is incorporated in its structure. It is 2-chloro-5(1- hydroxy-3-oxo-1-isoindolinyl) benzenesulfonamide with the following structural formula: Chlorthalidone, USP is practically insoluble in water, in ether, and in chloroform; soluble in methanol; slightly soluble in ethanol. Chlorthalidone tablets are available containing either 25 mg or 50 mg of chlorthalidone USP and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, Sodium Starch glycolate type-A, talc. Chemical Structure

Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The molecular formula for cinacalcet is C 22 H 22 F 3 N⋅HCl with a molecular weight of 393.9 grams/mol (hydrochloride salt) and 357.4 grams/mol (free base). It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white coloured crystalline powder, that is soluble in ethanol and methanol. The hydrochloride salt of cinacalcet is described chemically as N-[1-(R)-(-)-(1-naphthyl)ethyl]-3-[3-(trifluoromethyl)phenyl]-1-aminopropane hydrochloride and has the following structural formula: Cinacalcet tablets are formulated as light green, oval-shaped, film-coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.06 mg, 66.12 mg, and 99.18 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone and pregelatinized starch (modified corn (maize) starch). Tablets are coated with color (Opadry II green) FD&C blue #2, hypromellose, iron oxide yellow, lactose monohydrate, titanium dioxide and triacetin.

Ciprofloxacin 0.3% and dexamethasone 0.1% otic suspension USP, contains the quinolone antimicrobial, ciprofloxacin hydrochloride USP, combined with the corticosteroid, dexamethasone USP, in a sterile, preserved suspension for otic use. Each mL of ciprofloxacin 0.3% and dexamethasone 0.1% otic suspension contains ciprofloxacin hydrochloride USP (equivalent to 3 mg ciprofloxacin base), 1 mg dexamethasone USP, and 0.1 mg benzalkonium chloride as a preservative. The inactive ingredients are acetic acid, boric acid, edetate disodium, hydroxyethyl cellulose, sodium acetate, sodium chloride, tyloxapol and water for injection. Sodium hydroxide or hydrochloric acid may be added for adjustment of pH. Ciprofloxacin, a quinolone antimicrobial is available as the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid. The empirical formula is C 17 H 18 FN 3 O 3 ·HCl·H 2 O. The molecular weight is 385.82 g/mol and the structural formula is: Figure 1: Structure of Ciprofloxacin Dexamethasone, 9-fluoro-11(beta),17,21-trihydroxy-16(alpha)-methylpregna-1,4-diene-3,20-dione, is a corticosteroid. The empirical formula is C 22 H 29 FO 5 . The molecular weight is 392.46 g/mol and the structural formula is: Figure 2: Structure of Dexamethasone

D -Cycloserine, (R)-4-amino-3-isoxazolidinone, is a broad-spectrum antibiotic that is produced by a strain of Streptomyces orchidaceus and has also been synthesized. Cycloserine is a white to off-white powder that is soluble in water and stable in alkaline solution. It is rapidly destroyed at a neutral or acid pH. Cycloserine has a pH between 5.5 and 6.5 in a solution containing 100 mg/mL. The molecular weight of cycloserine is 102.09, and it has an empirical formula of C 3H6N2O 2 . The structural formula of cycloserine is as follows: Each capsule contains cycloserine, 250 mg (2.45 mmol); D & C Yellow No. 10, F D & C Blue No. 1, F D & C Red No. 3, F D & C Yellow No. 6, gelatin, iron oxide, talc, and titanium dioxide. Structural Formula of Cycloserine

Cyclosporine capsules, USP [MODIFIED] and cyclosporine oral solution, USP [MODIFIED] are oral formulations of cyclosporine that immediately forms a microemulsion in an aqueous environment. Cyclosporine, the active principle in cyclosporine capsules [MODIFIED] and cyclosporine oral solution, USP [MODIFIED], is a cyclic polypeptide immunosuppressant agent consisting of 11 amino acids. It is produced as a metabolite by the fungus species Beauveria nivea . Chemically, cyclosporine is designated as [ R -[ R *, R *-( E )]]-cyclic-(L-alanyl-D-alanyl- N -methyl-L-leucyl- N -methyl-L-leucyl- N -methyl-L-valyl-3-hydroxy- N , 4-dimethyl-L-2-amino-6-octenoyl-L-α-amino-butyryl- N -methylglycyl- N -methyl-L-leucyl-L-valyl- N -methyl-L-leucyl). Each soft gelatin cyclosporine capsule, USP [Modified] for oral administration contains 25 mg or 100 mg of cyclosporine, USP. In addition, each capsule contains the following inactive ingredients: Caprylic/capric triglyceride, dl-alpha-tocopherol, gelatin, glycerin, glyceryl caprylate, PEG-8 caprylic/capric glycerides, PEG-35 castor oil, red iron oxide, shellac, sorbitol special 76% and titanium dioxide USP. Cyclosporine oral solution, USP [MODIFIED] contains 100 mg/mL of cyclosporine, USP. Inactive ingredients: Caprylic/capric triglyceride, dl-alpha-tocopherol, glyceryl caprylate, PEG-8 caprylic/capric glycerides, PEG-35 castor oil. The chemical structure of cyclosporine, USP (also known as cyclosporin A) is:

Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N -decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1-lactone. The chemical structure is: The empirical formula is C 72 H 101 N 17 O 26 ; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 350 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration ( 2.5 ) ]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment; between 4.0 to 5.0. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown.

Decitabine is a nucleoside metabolic inhibitor. Decitabine is a white to off white coloured powder with the molecular formula of C 8 H 12 N 4 O 4 and a molecular weight of 228.21. Its chemical name is 4-amino-1-(2-deoxy-β-D-erythro-pentofuranosyl)-1,3,5-triazin-2(1 H )-one and it has the following structural formula: Decitabine is soluble in dimethyl sulphoxide and sparingly soluble in water. Decitabine for injection for intravenous use, is a sterile, white to almost white lyophilized powder supplied in a clear colorless glass single-dose vial. Each 20 mL vial contains 50 mg decitabine, 68 mg monobasic potassium phosphate (potassium dihydrogen phosphate) and 11.6 mg sodium hydroxide. Sodium hydroxide is used for pH adjustment.

Decitabine is a nucleoside metabolic inhibitor. Decitabine is a white to off white coloured powder with the molecular formula of C 8 H 12 N 4 O 4 and a molecular weight of 228.21. Its chemical name is 4-amino-1-(2-deoxy-β-D-erythro-pentofuranosyl)-1,3,5-triazin-2(1 H )-one and it has the following structural formula: Decitabine is soluble in dimethyl sulphoxide and sparingly soluble in water. Decitabine for injection for intravenous use, is a sterile, white to almost white lyophilized powder supplied in a clear colorless glass single-dose vial. Each 20 mL vial contains 50 mg decitabine, 68 mg monobasic potassium phosphate (potassium dihydrogen phosphate) and 11.6 mg sodium hydroxide. Sodium hydroxide is used for pH adjustment.

Deferasirox is an iron chelating agent. Deferasirox tablets for oral suspension contain 125 mg, 250 mg, or 500 mg deferasirox. Deferasirox is designated chemically as 4-[3,5-Bis (2-hydroxyphenyl)-1H-1,2,4-triazol-1- yl]-benzoic acid and its structural formula is: Deferasirox is a white to slightly yellow powder. Its molecular formula is C 21 H 15 N 3 O 4 and its molecular weight is 373.4 g/mol. Inactive Ingredients : colloidal silicon dioxide, croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone (K30) and sodium lauryl sulphate. str

Deferasirox is an iron-chelating agent provided as a tablet for oral use. Deferasirox is designated chemically as 4-[3,5-bis(2-hydroxy-phenyl)-1 H -1,2,4-triazol-1-yl] benzoic acid and has the following structural formula: Deferasirox is a white to slightly yellow colour powder. It has a molecular formula C 21 H 15 N 3 O 4 and molecular weight of 373.36.It is freely soluble in Dimethyl Formamide; sparingly soluble in Dimethylsulfoxide and practically insoluble in water. Deferasirox tablets contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, croscarmellose sodium, hydrogenated castor oil, lactose monohydrate, low substituted hydroxy propyl cellulose, microcrystalline cellulose, poloxamer (188), povidone (K30) and sodium stearyl fumarate. The film coating contains .hypromellose, titanium dioxide, propylene glycol, talc and iron oxide yellow. structure

Deferiprone tablets contain 1,000 mg or 500 mg deferiprone (3-hydroxy-1,2-dimethylpyridin-4-one), a synthetic, orally active, iron-chelating agent. The molecular formula for deferiprone is C 7 H 9 NO 2 and its molecular weight is 139.15 g/mol. Deferiprone has the following structural formula: Deferiprone is a white to pinkish-white powder. It is sparingly soluble in deionized water (14.3 mg/mL) and has a melting point range of 272°C - 278°C. Deferiprone Tablets (three times a day), 1,000 mg White to off-white, capsule shaped film coated scored tablets, with debossed bisect separating "A" and "67'' on one side and plain on other side. The tablets can be broken in half along the score line. Each tablet contains 1,000 mg deferiprone and the following inactive ingredients: Tablet core - methylcellulose, crospovidone, and magnesium stearate; Coating - hypromellose, macrogol, and titanium dioxide. Deferiprone Tablets, 500 mg White to off-white, capsule shaped film coated scored tablets, with debossed bisect separating "A" and "66" on one side and plain on other side. The tablets can be broken in half along the score line. Each tablet contains 500 mg deferiprone and the following inactive ingredients: Tablet core - methylcellulose, crospovidone and magnesium stearate; Coating - hypromellose, macrogol and titanium dioxide. Image

Desmopressin Acetate Injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows: Mol. Wt. 1068.4 Molecular Formula: C 46 H 64 N 14 O 12 S 2 •C 2 H 4 O 2 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt). Desmopressin acetate solution for injection is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.

Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5- phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure: M.W. 284.74 Diazepam Injection, USP is a sterile solution and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative. structure

Uses for the temporary relief of arthritis pain ONLY in the following areas: hand, wrist, elbow (upper body areas) foot, ankle, knee (lower body areas) this product may take up to 7 days to work for arthritis pain; it is not for immediate relief. If no pain relief in 7 days, stop use

Uses for the temporary relief of arthritis pain ONLY in the following areas: hand, wrist, elbow (upper body areas) foot, ankle, knee (lower body areas) this product may take up to 7 days to work for arthritis pain; it is not for immediate relief. If no pain relief in 7 days, stop use

Difluprednate ophthalmic emulsion (0.05%) is a sterile, topical anti-inflammatory corticosteroid for topical ophthalmic use. The chemical name is 6α,9difluoro-11β,17,21- trihydroxypregna-1,4- diene-3,20-dione 21-acetate 17-butyrate (CAS number 23674-86-4). Difluprednate is represented by the following structural formula: Difluprednate has a molecular weight of 508.55 g/mol, and the molecular formula is C 27 H 34 F 2 O 7 . Each mL difluprednate ophthalmic emulsion (0.05%) contains: ACTIVE: difluprednate 0.5 mg (0.05%); INACTIVE: boric acid, castor oil, glycerin, polysorbate 80, water for injection, sodium acetate anhydrous, edetate disodium dihydrate, sodium hydroxide (to adjust the pH between 5.2 and 5.8). The emulsion is essentially isotonic with a tonicity of 304 to 411 mOsm/kg. PRESERVATIVE: sorbic acid 0.1%.

Dimethyl fumarate delayed-release capsule, USP contains dimethyl fumarate, USP which is also known by its chemical name, dimethyl (E) butenedioate, (C 6 H 8 O 4 ). It has the following structure: Dimethyl fumarate, USP is a white to off-white powder that is freely soluble in dichloromethane and very slightly soluble in water with a molecular mass of 144.13. Dimethyl fumarate, USP is provided as hard gelatin delayed-release capsules for oral administration, containing 120 mg or 240 mg of dimethyl fumarate, USP consisting of the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, methacrylic acid-ethyl acrylate copolymer, methacrylic acid methyl methacrylate copolymer, microcrystalline cellulose, polysorbate 80, sodium lauryl sulfate, talc and triethyl citrate. The capsule shell contains the following inactive ingredients: gelatin and titanium dioxide and is imprinted with black ink, Black imprinting ink contains shellac, propylene glycol, black iron oxide and potassium hydroxide. structure

Use for the temporary relief of minor backache pain

Use for the temporary relief of minor backache pain

Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula: Docetaxel USP is a white to almost-white crystalline powder with molecular formula of C 43 H 53 NO 14 and a molecular weight of 808. It is freely soluble in anhydrous ethanol, soluble in methylene chloride and methanol, practically insoluble in water. One-vial Docetaxel Injection USP Docetaxel injection USP is a sterile, non-pyrogenic, pale yellow to brownish-yellow solution at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) 3 mg citric acid anhydrous in 0.54 grams polysorbate 80 and 0.395 grams dehydrated alcohol solution. The pH of the formulation is 3 to 4.5. Docetaxel injection USP is available in single-dose vials containing 20 mg (1 mL) or 80 mg (4 mL) docetaxel (anhydrous). Docetaxel injection USP requires NO prior dilution with a diluent and is ready to add to the infusion solution.

Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula: Docetaxel USP is a white to almost-white crystalline powder with molecular formula of C 43 H 53 NO 14 and a molecular weight of 808. It is freely soluble in anhydrous ethanol, soluble in methylene chloride and methanol, practically insoluble in water. One-vial Docetaxel Injection USP Docetaxel injection USP is a sterile, non-pyrogenic, pale yellow to brownish-yellow solution at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) 3 mg citric acid anhydrous in 0.54 grams polysorbate 80 and 0.395 grams dehydrated alcohol solution. The pH of the formulation is 3 to 4.5. Docetaxel injection USP is available in single-dose vials containing 20 mg (1 mL) or 80 mg (4 mL) docetaxel (anhydrous). Docetaxel injection USP requires NO prior dilution with a diluent and is ready to add to the infusion solution.

The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C 27 H 29 NO 11 •HCl and the molecular weight is 579.99. The structural formula is: Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula: HSPC has the following structural formula: Representation of a pegylated liposome: doxorubicin-structure. doxorubicin-mpeg-dspe doxorubicin-hspe doxorubicin-pegylated-liposome

Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, USP an anthracycline topoisomerase inhibitor, that is encapsulated in PEGYLATED liposomes for intravenous use. The chemical name of doxorubicin hydrochloride, USP is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxohexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C 27 H 29 NO 11 •HCl; its molecular weight is 579.99. The structure formula is: Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion in 10-mL or 30-mL glass, single-dose vials. Each vial contains 20 mg or 50 mg doxorubicin hydrochloride, USP at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin) and a pH of 6.5. The PEGYLATED liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide for pH adjustment; and sucrose 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the PEGYLATED liposomes. MPEG-DSPE has the following structural formula: n=ca. 45 HSPC has the following structural formula: m,n=14 or 16 Representation of a PEGYLATED liposome:

Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, USP, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate, USP is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate, USP is a yellow to light yellow powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11- dioxo-2-naphthacenecarboxamide, monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula: (C 22 H 24 N 2 O 8 ·HCl) 2 ·C 2 H 6 O·H 2 O M.W.1025.89 Doxycycline hyclate, USP is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate, USP equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg/mL) is between 1.8 and 3.3.

Uses Uses • temporarily relieves minor aches and pains due to: • headache • toothache • backache • menstrual cramps • muscular aches • minor pain of arthritis

Enalaprilat injection, USP is a sterile aqueous solution for intravenous administration. Enalaprilat is an angiotensin-converting enzyme inhibitor. It is chemically described as (S)-1-[N-(1-carboxy-3-phenylpropyl)-L-alanyl]-L-proline dihydrate. Its molecular formula is C 18 H 24 N 2 O 5 •2H 2 O and its structural formula is: Enalaprilat, USP is a white or almost white crystalline powder with a molecular weight of 384.43. It is sparingly soluble in methanol and slightly soluble in water. Each milliliter of enalaprilat injection, USP contains 1.25 mg enalaprilat, USP (anhydrous equivalent); sodium chloride to adjust tonicity; sodium hydroxide to adjust pH; water for injection, q.s.; with benzyl alcohol, 9 mg, added as a preservative.

Ephedrine is an alpha- and beta-adrenergic agonist and a norepinephrine-releasing agent. Ephedrine sulfate injection, USP is a clear, colorless, sterile solution for intravenous injection. It must be diluted before intravenous administration. The chemical name of ephedrine sulfate is benzenemethanol, α-[1-(methylamino)ethyl]-, [R-(R*,S*)]-, sulfate (2:1) (salt), and the molecular weight is 428.5 g/mol. Its structural formula is depicted below: Ephedrine sulfate is freely soluble in water and methanol, slightly soluble in ethanol, very slightly soluble in chloroform, practically insoluble in ether. Each mLof the 50 mg/mL strength contains ephedrine sulfate, USP 50 mg (equivalent to 38 mg ephedrine base) in water for injection. The pH is adjusted with sodium hydroxide and/or glacial acetic acid if necessary. The pH range is 4.5 to 7.0.The 50 mg/mL vial must be diluted before intravenous administration. structural formula

Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9H,15Hfuro[3,2-i]furo[2',3':5,6]pyrano[4,3-b] [1,4]dioxacyclopentacosin-5(4H)-one, 2-[(2S)-3-amino-2-hydroxypropyl] hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-, (2R,3R,3aS,7R,8aS,9S,10aR,11S,12R,13aR,13bS, 15S,18S,21S,24S,26R,28R,29aS)-, methanesulfonate (salt). It has a molecular weight of 826.01 (729.90 for free base). The molecular formula is C 40 H 59 NO 11 •CH 4 O 3 S. Eribulin mesylate has the following structural formula: Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.

USES temporarily relieves itchy and red eyes due to pollen, ragweed, grass, animal hair and dander

USE temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander

USE temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander

The active ingredient in famotidine for oral suspension is a histamine-2 (H2) receptor antagonist. Famotidine is N' -(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4- thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C 8 H 15 N 7 O 2 S 3 and its molecular weight is 337.43. Its structural formula is: Each 5 mL of famotidine for oral suspension when prepared as directed contains 40 mg of famotidine and the following inactive ingredients: anhydrous citric acid, corn starch, flavors (cherry and mint), maltodextrin, sucrose, and xanthan gum. Added as preservatives are methylparaben sodium, propylparaben sodium and sodium benzoate. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Structural Formula

Fenofibrate Tablets, USP is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate, USP. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula: The empirical formula is C 20 H 21 O 4 Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79-82°C. Fenofibrate, USP is a white solid which is stable under ordinary conditions. Inactive Ingredients Each tablet contains colloidal silicon dioxide, croscarmellose sodium, d & c yellow#10 aluminum lake (only 54 mg tablets), lactose monohydrate, lecithin, microcrystalline cellulose, polyvinyl alcohol, povidone k30, pregelatinized maize starch, sodium lauryl sulfate, sodium stearyl fumarate, talc, titanium dioxide, xanthan gum. Fenofibrate Tablets, USP meets USP Dissolution Test 2. structure

Use(s) temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: runny nose sneezing itchy, watery eyes itching of the nose or throat temporarily relives nasal congestion due to the common cold, hay fever or other upper respiratory allergies reduces swelling of nasal passages temporarily relieves sinus congestion and pressure temporarily restores freer breathing through the nose

Finasteride tablets USP, 1 mg contains finasteride as the active ingredient. Finasteride USP, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α -reductase, an intracellular enzyme that converts the androgen testosterone in to 5α -dihydrotestosterone (DHT). Finasteride USP is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-, (5α,17β)-. The molecular formula of finasteride is C 23 H 36 N 2 O 2 and its molecular weight is 372.55. Its structural formula is: Finasteride USP is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents but is practically insoluble in water. Finasteride tablets USP for oral administration are film-coated tablets that contain 1 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, docusate sodium, magnesium stearate and opadry brown (hypromellose, iron oxide red, talc, titanium dioxide, yellow iron oxide) . structure.jpg

Finasteride USP, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17β)-. The empirical formula of finasteride is C 23 H 36 N 2 O 2 and its molecular weight is 372.55. Its structural formula is: Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, docusate sodium, magnesium stearate, opadry blue (FD&C blue #2 aluminium lake, hypromellose, talc, titanium dioxide, yellow iron oxide). The botanical source of the Pregelatinized Starch is Maize.

Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below: Fingolimod hydrochloride USP is a white to practically white powder. It is freely soluble in water and ethanol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride USP, equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: betacyclodextrin, black iron oxide, dehydrated alcohol, gelatin, iron oxide yellow, magnesium stearate, potassium hydroxide, propylene glycol, shellac, sodium lauryl sulphate, strong ammonia solution and titanium dioxide.

Fluorouracil cream, 0.5%, contains fluorouracil for topical dermatologic use. Chemically, fluorouracil is 5-fluoro-2,4(1H, 3H)-pyrimidinedione. The molecular formula is C 4 H 3 FN 2 O 2 . Fluorouracil has a molecular weight of 130.08. Fluorouracil cream contains 0.5% fluorouracil, with 0.35% being incorporated into a patented porous microsphere (Microsponge ® ) composed of methyl methacrylate/glycol dimethacrylate crosspolymer and dimethicone. The cream formulation contains the following other inactive ingredients: Carbomer Homopolymer Type C, glycerin, methyl gluceth-20, methylparaben, octyl hydroxy stearate, polyethylene glycol 400, polysorbate 80, propylene glycol, propylparaben, purified water, sorbitan monooleate, stearic acid, and trolamine. chemical-structure

Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1-piperazineethanol dihydrochloride. The structural formula is represented below: Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, sodium lauryl sulfate, magnesium stearate, polyvinyl alcohol, titanium dioxide , polyethylene glycol, talc, FD&C yellow No. 5 (2.5 mg tablet), FD&C blue No. 1 (5 mg tablet), D&C yellow No. 10 (5 mg tablet), FD&C yellow No. 6 (5 mg & 10 mg tablet), ferric oxide yellow (10 mg tablet) and water. Structural Formula

For Oral Inhalation Only. Formoterol Fumarate Inhalation Solution is supplied as 2 mL of formoterol fumarate inhalation solution packaged in a 2.5 mL single-dose low-density polyethylene vial and overwrapped in a foil pouch. Each vial contains 2 mL of a clear, colorless solution composed of formoterol fumarate dihydrate, USP equivalent to 20 mcg of formoterol fumarate in an isotonic, sterile aqueous solution containing sodium chloride, pH adjusted to 5.0 with citric acid and sodium citrate. The active component of Formoterol Fumarate Inhalation Solution is formoterol fumarate dihydrate, USP, a racemate. Formoterol fumarate dihydrate is a beta 2 -adrenergic bronchodilator. Its chemical name is (±)-2-hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino]ethyl]formanilide fumarate dihydrate; its structural formula is: Formoterol fumarate dihydrate, USP has a molecular weight of 840.93 and its molecular formula is (C 19 H 24 N 2 O 4 ) 2 •C 4 H 4 O 4 •2H 2 O. Formoterol fumarate dihydrate, USP is a white or almost white or slightly yellow powder, which is freely soluble in dimethylformamide, acetic acid, soluble in methanol, slightly soluble in ethanol and isopropanol, slightly soluble in water, and practically insoluble in acetone, dioxane. Formoterol Fumarate Inhalation Solution does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors and the nebulization system used and its performance. Using the PARI-LC Plus ® nebulizer (with a facemask or mouthpiece) connected to a PRONEB ® Ultra compressor under in vitro conditions, the mean delivered dose from the mouthpiece was approximately 7.3 mcg (37% of label claim). The mean nebulizer flow rate was 4 LPM and the nebulization time was 9 minutes. Formoterol Fumarate Inhalation Solution should be administered from a standard jet nebulizer at adequate flow rates via a facemask or mouthpiece. Structural Formula

Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine,a prodrug of aprepitant a substance P/neurokinin-1 (NK 1 ) receptor antagonist, an antiemetic agent, chemically described as 1­ Deoxy-1-(methylamino)-D-glucito[3-[[(2R,3S)-2-[(1R)-1-[3,5- bis(trifluoromethyl)phenyl]ethoxy]-3-(4­ fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate(2:1) (salt).Its empirical formula is C 23 H 22 F 7 N 4 O 6 P • 2(C 7 H 17 NO 5 ) and its structural formula is: Fosaprepitant dimeglumine is a white to off-white powder with a molecular weight of 1004.83. It is freely soluble in water soluble in N,N-Dimethylsulfoxide and insoluble in n-hexane.Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 245.3 mg of fosaprepitant dimeglumine equivalent to 150 mg of fosaprepitant free acid and the following inactive ingredients: edetate disodium (5.4 mg), lactose anhydrous(375 mg), polysorbate 80 (75 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).

Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1 ) receptor antagonist, an antiemetic agent, chemically described as 1­Deoxy-1-(methylamino)-D-glucitol[3-[[(2R,3S)-2-[(1R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4­fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its emperical formula is C 23 H 22 F 7 N 4 O 6 P ⋅2(C 7 H 17 NO 5 ) and its structural formula is Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).

Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine,a prodrug of aprepitant a substance P/neurokinin-1 (NK 1 ) receptor antagonist, an antiemetic agent, chemically described as 1­ Deoxy-1-(methylamino)-D-glucito[3-[[(2R,3S)-2-[(1R)-1-[3,5- bis(trifluoromethyl)phenyl]ethoxy]-3-(4­ fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate(2:1) (salt).Its empirical formula is C 23 H 22 F 7 N 4 O 6 P • 2(C 7 H 17 NO 5 ) and its structural formula is: Fosaprepitant dimeglumine is a white to off-white powder with a molecular weight of 1004.83. It is freely soluble in water soluble in N,N-Dimethylsulfoxide and insoluble in n-hexane.Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 245.3 mg of fosaprepitant dimeglumine equivalent to 150 mg of fosaprepitant free acid and the following inactive ingredients: edetatedisodium (18.8 mg), lactose anhydrous(375 mg), polysorbate 80 (75 mg), sodium hydroxide and/orhydrochloric acid (for pH adjustment).

Use for the relief of pressure, bloating, and fullness commonly referred to as gas

Use(s) helps loosen phlegum (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive

Use(s) helps loosen phlegum (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive

Uses helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive temporarily relieves: cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritants the intensity of coughing the impulse to cough to help you get to sleep

Uses helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive temporarily relieves: cough due to minor throat and bronchial irritation as may occur with the common cold or inhaled irritants the intensity of coughing the impulse to cough to help you get to sleep

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking