cipla usa inc. - Medication Listings

Rizatriptan benzoate tablets, USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine 1B/1D (5-HT 1B/1D ) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N -dimethyl-5-(1 H -1,2,4-triazol-1-ylmethyl)-1 H -indole-3-ethanamine monobenzoate and its structural formula is: Its molecular formula is C 15 H 19 N 5 •C 7 H 6 O 2 , representing a molecular weight of the free base of 269.4. Rizatriptan benzoate, USP is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate tablets are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, starch (corn starch), pregelatinized starch ( maize), colloidal silicon dioxide, ferric oxide (red), and magnesium stearate. Image

The active ingredient in sevelamer carbonate tablets is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride (Renagel ®) . Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate-binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1: Chemical Structure of Sevelamer Carbonate a, b = number of primary amine groups a + b = 9 c = number of cross-linking groups c = 1 m = large number to indicate extended polymer network Sevelamer Carbonate Tablets: Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are microcrystalline cellulose, silicified microcrystalline cellulose, crospovidone, hydroxy propyl cellulose, talc, colloidal silicon dioxide, sodium stearyl fumarate, hydroxy propyl methyl cellulose, and diacetylated monoglycerides. Chemical Structure/Figure 1

The active ingredient in sevelamer carbonate tablets is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride (Renagel ®) . Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate a, b = number of primary amine groups a + b = 9 c = number of crosslinking groups c = 1 m = large number to indicate extended polymer network Sevelamer Carbonate Tablets: Each film-coated tablet contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are microcrystalline cellulose, silicified microcrystalline cellulose, crospovidone, hydroxy propyl cellulose, talc, colloidal silicon dioxide, sodium stearyl fumarate, hydroxy propyl methyl cellulose and diacetylated monoglycerides. Chemical Structure/Figure 1

Sumatriptan nasal spray, USP contains sumatriptan USP, a selective 5-HT 1B/1D receptor agonist. Sumatriptan is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide, and it has the following structure: The empirical formula is C 14 H 21 N 3 O 2 S, representing a molecular weight of 295.4. Sumatriptan USP is a white to pale yellow powder that is very slightly soluble in water. Each sumatriptan nasal spray, USP contains 20 mg of sumatriptan USP in a 100- mcL unit dose aqueous buffered solution containing monobasic potassium phosphate NF, anhydrous dibasic sodium phosphate USP, sulfuric acid NF, sodium hydroxide NF, and purified water USP. The pH of the solution is approximately 5.5. The osmolality of the solution is 742 mOsmol for 20-mg sumatriptan nasal spray. API structure

Tadalafil tablets, an oral treatment for pulmonary arterial hypertension, is a selective inhibitor of cyclic guanosine monophosphate (cGMP)–specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22 H 19 N 3 O 4 representing a molecular weight of 389.41. The structural formula is: The chemical designation is pyrazino[1´,2´:1,6]pyrido[3,4–b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a- hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP 20 mg are available brown colored, capsule shaped, biconvex film coated tablet with 'Cipla' debossed on one side and 526 on other side. Each tablet contains 20 mg of tadalafil and the following inactive ingredients: : croscarmellose sodium, hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, titanium dioxide and triacetin. Image

Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C 7 H 6 BFO 2 , the molecular weight is 151.93 and the structural formula is: Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include alcohol 74.81 % (v/v), edetate calcium disodium, and propylene glycol. Image

Tenofovir disoproxil fumarate (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5'-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of TDF is 9-[( R )-2-[[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C 19 H 30 N 5 O 10 P • C 4 H 4 O 4 and a molecular weight of 635.52. It has the following structural formula: Tenofovir disoproxil fumarate is a white to off-white crystalline powder with a solubility of 13.4 mg/mL in distilled water at 25°C. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C. Tenofovir disoproxil fumarate tablets are for oral administration. Each tablet contains 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil, and the following inactive ingredients: Lactose monohydrate, Croscarmellose sodium, Corn starch, Polysorbate 80, Microcrystalline cellulose, Magnesium stearate, Opadry II Y-30-10671-A Light blue. (Lactose monohydrate, HPMC2910/Hypromellose 15cP, Titanium dioxide, Triacetin / Glycerol triacetate, FD&C Blue #2/Indigo carmine Aluminum Lake). In this insert, all dosages are expressed in terms of TDF except where otherwise noted. Image

Terbinafine tablets, USP contain the synthetic allylamine antifungal compound terbinafine hydrochloride. Chemically, terbinafine hydrochloride, USP is (E)- N -(6, 6-dimethyl-2-hepten-4-ynyl)- N -methyl-1-naphthalenemethanamine hydrochloride. The empirical formula C 21 H 26 CIN with a molecular weight of 327.90, and the following structural formula : Terbinafine hydrochloride, USP is a white to off-white fine crystalline powder. It is freely soluble in methanol and methylene chloride, soluble in ethanol, and slightly soluble in water. Each tablet contains: Active Ingredients: terbinafine hydrochloride (equivalent to 250 mg base) Inactive Ingredients: colloidal silicon dioxide NF, hypromellose USP, magnesium stearate NF, microcrystalline cellulose NF, and sodium starch glycolate NF. Image 2

Terbinafine tablets, contain the synthetic allylamine antifungal compound terbinafine hydrochloride. Chemically, terbinafine hydrochloride is (E)- N -(6, 6-dimethyl-2-hepten-4-ynyl)- N -methyl-1-naphthalenemethanamine hydrochloride. The empirical formula C 21 H 26 CIN with a molecular weight of 327.90, and the following structural formula: Terbinafine hydrochloride is a white to off-white fine crystalline powder. It is freely soluble in methanol and methylene chloride, soluble in ethanol, and slightly soluble in water. Each tablet contains: Active Ingredients : terbinafine hydrochloride (equivalent to 250 mg of base) Inactive Ingredients : colloidal silicon dioxide NF, hypromellose USP, magnesium stearate NF, microcrystalline cellulose NF, and sodium starch glycolate NF. Image

Testosterone topical solution is a clear, colorless, single phase solution containing 30 mg of testosterone in 1.5 mL of testosterone topical solution for topical administration through the axilla. The active pharmacologic ingredient in testosterone topical solution is testosterone. Testosterone USP is a white to practically white crystalline powder chemically described as 17-beta hydroxyandrost-4-en-3-one. The structural formula is: The inactive ingredients are ethanol, isopropyl alcohol, octisalate, and povidone. api-structure

Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17β)-. Its molecular formula is C 27 H 40 O 3 , and the molecular weight 412.61. The structural formula is represented below: Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains: Testosterone Cypionate, USP 200 mg Benzyl Benzoate, USP 0.2 mL Cottonseed Oil, USP 560 mg Benzyl Alcohol, USP (as preservative) 9.45 mg testosterone-cypionate-injection-str.

Testosterone cypionate, for intramuscular injection, contains testosterone cypionate which is the oil-soluble 17 (beta)-cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone cypionate is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for testosterone cypionate is androst-4-en-3-one, 17-(3-cyclopentyl- 1-oxopropoxy)-, (17ß)-. Its molecular formula is C 27 H 40 O 3 , and the molecular weight 412.61. The structural formula is represented below: Testosterone cypionate injection, USP is available in two strengths, 100 mg/mL and 200 mg/mL testosterone cypionate. Each mL of the 100 mg/mL solution contains: Testosterone cypionate............................................................................................100 mg Benzyl benzoate ......................................................................................................0.1 mL Cottonseed oil .........................................................................................................736 mg Benzyl alcohol (as preservative) .............................................................................9.45 mg Each mL of the 200 mg/mL solution contains: Testosterone cypionate .............................................................................................200 mg Benzyl benzoate ........................................................................................................0.2 mL Cottonseed oil ...........................................................................................................560 mg Benzyl alcohol (as preservative) ...............................................................................9.45 mg Image

Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pre-gelatinized starch (maize), sodium starch glycolate, magnesium stearate, opadry white (titanium dioxide, hypromellose 3cp, hypromellose 6cp, PEG 400, polysorbate 80) for 25 mg tablets, opadry yellow (titanium dioxide, hypromellose 3cp, hypromellose 6cp, PEG 400, polysorbate 80, iron oxide yellow) for 50 mg tablets, opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow, polysorbate 80, iron oxide red) for 100 mg tablets and, opadry pink (titanium dioxide, hypromellose 6cp, PEG 400,iron oxide red) for 200 mg tablets. topiramate-str

Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, and 100 mg circular tablets and 200 mg capsule shaped tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C 12 H 21 NO 8 S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di- O -isopropylidene-ß-D-fructopyranose sulfamate and has the following structural formula: Each tablet, for oral administration, contains 25 mg, 50 mg, 100 mg and 200 mg topiramate and has the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide. In addition, the 25 mg also contains FD&C Blue#2; the 50 mg and 100 mg also contain red iron oxide and yellow iron oxide; and the 200 mg also contains red iron oxide. topi

Trospium chloride, USP is a quaternary ammonium compound with the chemical name of Spiro[8azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride, USP is C 25 H 30 ClNO 3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below: Trospium chloride, USP is a fine, colorless to slightly yellow, crystalline solid. The compound’s solubility in water is approximately 1 g per 2 mL. Each trospium chloride tablet contains 20 mg of trospium chloride, USP a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, polysorbate 80, xylitol, sucralose, red iron oxide and yellow iron oxide. Meets USP Dissolution Test 2. trospium chloride structural formula

Vigabatrin for oral solution, USP is an oral antiepileptic drug and is available as a white to off-white granular powder for oral solution in packets of 500 mg. The chemical name of vigabatrin, USP a racemate consisting of two enantiomers, is (±) 4 -amino-5-hexenoic acid. The molecular formula is C 6 H 11 NO 2 and the molecular weight is 129.16. It has the following structural formula: Vigabatrin, USP is a white to off-white powder which is freely soluble in water, slightly soluble in methyl alcohol, very slightly soluble in ethyl alcohol and chloroform, and insoluble in toluene and hexane. The pH of a 1% aqueous solution is about 6.9. The n-octanol/water partition coefficient of vigabatrin, USP is about 0.011 (log P =-1.96) at physiologic pH. Vigabatrin melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pK a ) of vigabatrin, USP are 4 and 9.7 at room temperature (25°C). Vigabatrin for oral solution, USP is available as white to off-white granular powder. Each packet contains 500 mg of vigabatrin, USP. The inactive ingredient is povidone. Vigabatrin

Vilazodone hydrochloride tablets for oral administration contain polymorph Form B vilazodone hydrochloride (HCl), a selective serotonin reuptake inhibitor and a 5HT 1A receptor partial agonist. Vilazodone HCl is 5-[4-[4-(5-cyano-1 H -indol-3-yl)butyl]piperazin-1-yl] benzofuran-2-carboxamide hydrochloride Dihydrate. Its molecular weight is 514.03 The structural formula is: In addition to the active ingredient, vilazodone hydrochloride tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, magnesium stearate, colloidal silicon dioxide, polyvinyl alcohol, titanium dioxide, polyethylene glycol 4000, talc, FD&C Blue No.1 (40 mg only), D&C Yellow No.10 (40 mg only),FD&C Yellow No.6 (10 mg and 20 mg), and FD&C Red No.40 (10 mg only). vilazodone_structure

ZEMDRI contains plazomicin sulfate, a semi-synthetic aminoglycoside antibacterial derived from sisomicin. The chemical name of plazomicin sulfate is (2" R ,3" R ,4" R ,5" R )-2"-[(1 S ,2 S ,3 R ,4 S ,6 R )-4-amino-6-[(2'" S )-4'"-amino-2'"-hydroxybutanamido)amino]-3-[(2' S ,3' R )-3'-amino-6'-((2-hydroxyethylamino)methyl)-3',4'-dihydro-2H-pyran-2'-yloxy]-2-hydroxycyclohexyloxy]-5''-methyl-4''-(methylamino)tetrahydro-2H-pyran-3'',5''-diol sulfate. Plazomicin sulfate contains a theoretical 2.5 molar equivalents of sulfate relative to the freebase, based on complete protonation. The molecular weight of plazomicin sulfate is calculated based on 1:2.5 stoichiometry. The corresponding empirical formula is C 25 H 48 N 6 O 10 ∙2.5 H 2 SO 4 (plazomicin sulfate) and the molecular weight of the plazomicin sulfate salt is 837.89 g/mol and the molecular weight of the freebase is 592.69 g/mol. Figure 1: Chemical Structure of Plazomicin Sulfate ZEMDRI injection 500 mg/10 mL is a sterile, clear, colorless-to-yellow liquid for intravenous administration supplied in 10-mL single-dose Type 1 glass vials. Each vial contains plazomicin sulfate equivalent to 500 mg plazomicin freebase at a concentration of 50 mg/mL adjusted to pH 6.5. Each vial also contains Water for Injection and sodium hydroxide for pH adjustment. This sterile, nonpyrogenic solution is formulated without preservatives. Chemical Structure

Zolmitriptan tablets are selective 5-hydroxytryptamine 1B/1D (5HT 1B/1D ) receptor agonists. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino)ethyl]-1H-indol-5yl]methyl]-2-oxazolidinone and has the following chemical structure: The empirical formula is C 16 H 21 N 3 O 2 representing a molecular weight of 287.36. Zolmitriptan is a white to off-white powder that is freely soluble in methanol and dimethylsulfoxide, insoluble in water. Zolmitriptan tablets are available as 2.5 mg (yellow and functionally-score) and 5 mg (pink, not scored) film coated tablets for oral administration. The film coated tablets contain lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, magnesium stearate, hypromellose, polyethylene glycol, polysorbate, titanium dioxide, yellow iron oxide, and red iron oxide. Image

Zonisamide, USP is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide USP, 1,2-benzisoxazole-3-methanesulfonamide. The empirical formula is C 8 H 8 N 2 O 3 S with a molecular weight of 212.23. Zonisamide USP is a white powder, pKa = 10.2, and is moderately soluble in water (0.80 mg/mL) and 0.1 N HCl (0.50 mg/mL). The chemical structure is: Zonisamide is supplied for oral administration as capsules containing 100 mg zonisamide. Each 100 mg capsule contains the labeled amount of zonisamide plus the following inactive ingredients: microcrystalline cellulose, hydrogenated vegetable oil, gelatin and colorants. Components of gelatin capsules (For 100 mg: titanium dioxide, gelatin and FDA/E172 red iron oxide). Imprint ink dye (Black SW- 9008/SW-9009). image