burel pharmaceuticals, llc - Medication Listings

The active ingredient in pantoprazole sodium delayed-release tablets, USP a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]­-1 H -benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C 16 H 14 F 2 N 3 NaO 4 S x 1.5 H 2 O, with a molecular weight of 432.4. The structural formula is: Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium USP is supplied as a delayed-release tablet, available as 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: calcium stearate, crospovidone, ferric oxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer dispersion, sodium carbonate, and triethyl citrate. The tablets are imprinted with brown ink containing ammonium hydroxide, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, N-butyl alcohol, propylene glycol, and shellac glaze in ethanol. Pantoprazole sodium delayed-release tablets 40 mg complies USP dissolution test 3. chemical structure

Use For the treatment of acne

Betamethasone dipropionate ointment USP (augmented), 0.05% contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17, 21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β, 17,21-trihydroxy-16β -methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C 28 H 37 FO 7 , a molecular weight of 504.6 and the following structural formula: It is a white or almost white, crystalline powder practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of betamethasone dipropionate ointment USP (augmented), 0.05% contains 0.643 mg betamethasone dipropionate USP (equivalent to 0.5 mg betamethasone), in a white to off-white ointment base of propylene glycol, propylene glycol monopalmitostearate, white petrolatum, and white wax. str

Each Butalbital and acetaminophen tablets, 50 mg/ 325 mg for oral administration contains: *Butalbital, USP………...….. 50 mg Acetaminophen, USP..……. 325 mg Each Butalbital and acetaminophen tablets, 50 mg/ 300 mg for oral administration contains: *Butalbital, USP………...….. 50 mg Acetaminophen, USP..……. 300 mg * Habit forming ingredient In addition, each tablet contains the following inactive ingredients: Microcrystalline Cellulose, Silicified Microcrystalline Cellulose, Croscarmellose Sodium, Colloidal Silicon Dioxide, Magnesium Stearate, Pregelatinized Starch, Povidone, Crospovidone and Stearic Acid. Butalbital (5-allyl-5-isobutylbarbituric acid), a slightly bitter, white, odorless, crystalline powder, is a short to intermediate-acting barbiturate. It has the following structural formula: C 11 H 16 N 2 O 3 M.W.=224.26 Acetaminophen (4'-hydroxyacetanilide), a slightly bitter, white, odorless, crystalline powder, is a non- opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C 8 H 9 NO 2 M.W.=151.16 Image Image

Carglumic acid tablets for oral suspension contain 200 mg of carglumic acid. Carglumic acid, the active substance, is a carbamoyl phosphate synthetase 1 (CPS 1) activator and is soluble in dimethyl formamide and sparingly soluble in water. The chemical name of carglumic acid is N-carbamoyl-L-glutamic acid or (2S)-2-(carbamoylamino) pentanedioic acid. The empirical formula is C 6 H 10 N 2 O 5 and the molecular weight is 190.16. The structural formula is: The inactive ingredients of carglumic acid tablets for oral suspension are croscarmellose sodium, microcrystalline cellulose, sodium lauryl sulfate, colloidal silicon dioxide and sodium stearyl fumarate. Image

Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contain mixed salts of a single-entity amphetamine, a CNS stimulant. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contains equal amounts (by weight) of four salts: dextroamphetamine sulfate, amphetamine sulfate, dextroamphetamine saccharate and amphetamine (D, L)-aspartate monohydrate. This results in a 3.1:1 mixture of dextro- to levo- amphetamine base equivalent. The 5 mg, 10 mg, 15 mg, 20 mg, 25 mg and 30 mg strength extended-release capsules are for oral administration. Dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules contains two types of drug-containing beads (immediate-release and delayed release) which prolong the release of amphetamine compared to the dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate (immediate-release) tablet formulation. Each Capsule Contains: Capsule Strength 5 mg 10 mg 15 mg 20 mg 25 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Amphetamine (D,L)- Aspartate Monohydrate 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Dextroamphetamine Sulfate USP 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Amphetamine Sulfate USP 1.25 mg 2.5 mg 3.75 mg 5.0 mg 6.25 mg 7.5 mg Total amphetamine base equivalence 3.1 mg 6.3 mg 9.4 mg 12.5 mg 15.6 mg 18.8 mg d- amphetamine base equivalence 2.4 mg 4.7 mg 7.1 mg 9.5 mg 11.9 mg 14.2 mg l- amphetamine base equivalence 0.75 mg 1.5 mg 2.3 mg 3.0 mg 3.8 mg 4.5 mg Inactive Ingredients and Colors The inactive ingredients in dextroamphetamine saccharate, amphetamine aspartate monohydrate, dextroamphetamine sulfate and amphetamine sulfate extended-release capsules include: ferric oxide red, ferric oxide yellow, gelatin capsules, hypromellose 2910/3 cP, 6 cP and 50 cP, methacrylic acid and ethyl acrylate copolymer, titanium dioxide, polyethylene glycol, polysorbate 80, sugar spheres, talc, and triethyl citrate. The 5 mg gelatin capsules contain gelatin, titanium dioxide, D&C yellow #10, FD&C blue #1 and FD&C yellow #6. The 10 mg gelatin capsules contain gelatin, FD&C blue #1, and FD&C red #40. The 15 mg gelatin capsules contain gelatin, titanium dioxide, FD&C blue #1, and FD&C yellow #6. The 20 mg gelatin capsules contain gelatin, titanium dioxide, and FD&C red #3. The 25 mg gelatin capsules contain gelatin, FD&C red #40, and FD&C yellow #6. The 30 mg gelatin capsules contain gelatin, titanium dioxide, D&C red #28, and FD&C red #40. The ink ingredients are common for all strengths: the capsule imprint black ink contains FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake, FD&C yellow #6 aluminum lake, propylene glycol, and shellac.

Finasteride tablets USP contain finasteride USP as the active ingredient. Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). The chemical name of finasteride is N-tert -Butyl-3-oxo-4-aza-5α-androst-1-ene-17β-carboxamide. The molecular formula of finasteride is C 23 H 36 N 2 O 2 and its molecular weight is 372.55. Its structural formula is: Finasteride USP is a white to off-white, crystalline solid with a melting point between 254°C and 262°C. It is freely soluble in chloroform and in lower alcohol solvents but is practically insoluble in water. Finasteride tablets USP are film-coated tablets for oral administration. Each tablet contains 1 mg of finasteride USP and the following inactive ingredients: docusate sodium, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinised starch (maize), sodium starch glycolate, talc, and titanium dioxide. Chemical Structure

Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4'-fluorobutyrophenone and it has the following structural formula: Each tablet for oral administration contains haloperidol USP, 10 mg. Inactive ingredients include lactose monohydrate, microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and stearic acid. Chemical structure of haloperidol

Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chlorophenyl)-4-hydroxypiperidino]-4'-fluorobutyrophenone and it has the following structural formula: Each tablet for oral administration contains haloperidol USP, 5 mg. Inactive ingredients include lactose monohydrate, microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and stearic acid. Chemical structure of haloperidol

Ketoconazole tablets USP is a synthetic broad-spectrum antifungal agent available in scored white tablets, each containing 200 mg ketoconazole base for oral administration. Inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and methylcellulose. Ketoconazole is cis-1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl] methoxyl]phenyl] piperazine and has the following structural formula: Ketoconazole is a white to slightly beige, odorless powder, soluble in acids, with a molecular weight of 531.44g/mol. FDA approved dissolution test specifications differ from USP. Image

Leflunomide is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C 12 H 9 F 3 N 2 O 2 , a molecular weight of 270.2 and the following structural formula: Leflunomide is available for oral administration as tablets containing 10 or 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: lactose monohydrate, hydroxypropyl cellulose, tartaric acid, sodium lauryl sulfate, magnesium stearate, opadry white, polyvinyl alcohol, titanium dioxide, talc, lecithin, and xanthan gum. Chemical Structure

Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2 -adrenergic receptor agonist [see Clinical Pharmacology ( 12 ) ]. The chemical name for levalbuterol HCl is (R)-α 1 -[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows: The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C 13 H 21 NO 3 •HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5). Chem Structure

Milophene™ (clomiphene citrate) Tablets, USP is an orally administered, nonsteroidal, ovulatory stimulant designated chemically as 2-[p-(2-chloro-1,2-diphenylvinyl)phenoxy] triethylamine citrate (1:1). It has the molecular formula of C 26 H 28 CINO • C 6 H 8 O 7 and a molecular weight of 598.10. It is represented structurally as: Clomiphene citrate is a white to pale yellow, essentially odorless, crystalline powder. It is freely soluble in methanol; soluble in ethanol; slightly soluble in acetone, water, and chloroform; and insoluble in ether. Clomiphene citrate is a mixture of two geometric isomers [cis (zuclomiphene) and trans (enclomiphene)] containing between 30% and 50% of the cis-isomer. Each off-white debossed tablet contains 50 mg Milophene™ (clomiphene citrate) USP. The tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized corn starch, and sucrose. This is the structural formula

Nicardipine hydrochloride capsules for oral administration each contain 20 mg or 30 mg of nicardipine hydrochloride. Nicardipine hydrochloride capsules are a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine structure with the IUPAC (International Union of Pure and Applied Chemistry) chemical name 2-(benzyl-methyl amino)ethyl methyl 1,4-dihydro-2,6-dimethyl- 4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride, and it has the following structure: Molecular formula: C 26 H 29 N 3 O 6 ● HCl Nicardipine hydrochloride is a pale greenish-yellow, crystalline powder that melts at about 169°C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Each capsule, for oral administration, contains 20 mg or 30 mg of nicardipine hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate and pregelatinized starch with capsule shell composed of gelatin, titanium dioxide and FD&C blue #1. Imprinting ink composed of black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. Image

Each phenoxybenzamine hydrochloride capsule, USP with white opaque cap and body, is imprinted "PHEH" on cap and "10" on body, and contains 10 mg of phenoxybenzamine hydrochloride USP. Inactive ingredients consist of anhydrous lactose and talc. The capsule shell contains gelatin and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. Phenoxybenzamine hydrochloride is N -(2-Chloroethyl)- N -(1-methyl-2-phenoxyethyl)benzylamine hydrochloride: Phenoxybenzamine hydrochloride USP is white or almost white crystalline powder with a molecular weight of 340.3, which melts between 136° and 141°C. It is freely soluble in ethanol, sparingly soluble in water. str

Self-topical neutral fluoride gel containing 1.1% (w/v) sodium fluoride for use as a dental caries preventative in pediatric patients and adults. This prescription is not a dentifrice.

Sodium Polystyrene Sulfonate Suspension, USP can be administered orally or in an enema. It is a suspension containing 15 grams of cation-exchange resin (Sodium Polystyrene Sulfonate, USP) per 60 mL of suspension. Also contains Purified Water, USP; Propylene Glycol, USP; Sodium Saccharin, USP; Methylparaben, NF; Propylparaben, NF; Xanthan Gum, NF; and Citric Acid Anhydrous, USP. Sodium polystyrene sulfonate is a benzene, diethenyl-, polymer with ethenylbenzene, sulfonated, sodium salt and has the following structural formula: The sodium content of the suspension is 1500 mg (65 mEq) per 60 mL. It is a brown, slightly viscous suspension with an in‑vitro exchange capacity of approximately 3.1 mEq ( in-vivo approximately 1 mEq) of potassium per 4 mL (1 gram) of suspension. It can be administered orally or in an enema. Chem

Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22 H 19 N 3 O 4 representing a molecular weight of 389.41. The structural formula is: The chemical designation is pyrazino[1´,2´:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablet, USP is available as yellow colored, oval-shaped, film coated tablets for oral administration. Each tablet contains 2.5, 5, 10, or 20 mg of tadalafil and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, copovidone, sodium lauryl sulfate, magnesium stearate, hypromellose, titanium dioxide, iron oxide yellow and triacetin. Chemical Structure