baxter healthcare corporation - Medication Listings

Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro -N -furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows: Each mL contains: Furosemide 10 mg, Sodium Hydroxide 1.34 mg, Water for Injection q.s., Sodium Chloride for isotonicity, additional Sodium Hydroxide (q.s.) and, if necessary, Hydrochloric Acid (q.s.) to adjust pH between 8.0 and 9.3. spl-image-01-structure.jpg

Acetaminophen, USP is a non-salicylate antipyretic and non-opioid analgesic agent. Acetaminophen, USP is a white, odorless, very fine powder having a slightly bitter taste. Its chemical name is N-acetyl-p-aminophenol. Acetaminophen, USP. It has a molecular weight of 151.16 g/mol and its molecular formula is C 8 H 9 NO 2 . Its structural formula is: Viaflo container is a flexible plastic container fabricated from a multilayer sheeting composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Acetaminophen injection is a sterile, clear, colorless, non pyrogenic, isotonic formulation of acetaminophen intended for intravenous infusion. It has a pH of approximately between 5.0 to 6.3 and an osmolality of approximately 290 mOsm/kg. For 1000 mg/100 mL (10 mg/mL): Each 100 mL contains 1000 mg acetaminophen, USP, 3850 mg mannitol, USP, 25 mg L-cysteine hydrochloride monohydrate, USP, and 10.4 mg dibasic sodium phosphate anhydrous, USP. pH is adjusted with hydrochloric acid and/or sodium hydroxide. For 650 mg/65 mL (10 mg/mL): Each mL contains 10 mg acetaminophen, USP, 0.104 mg dibasic sodium phosphate anhydrous, USP, 0.25 mg L-cysteine hydrochloride monohydrate, USP, and 38.5 mg mannitol, USP. pH is adjusted with hydrochloric acid and/or sodium hydroxide. image-01

0.25% Acetic Acid Irrigation, USP, is a sterile, nonpyrogenic hypotonic solution for irrigation of the urinary bladder. Each 100 mL contains 250 mg Glacial Acetic Acid, USP, (CH 3 COOH) in Water for Injection, USP. pH 3.0 (2.8 to 3.4). Osmolarity: 42 mOsmol/L (calc.). No antimicrobial agent has been added. The container is made from specially formulated polyolefin (PL 325). The polyolefin is a copolymer of ethylene and propylene. It contains no plasticizers or other mobile additives. As a result, the container has virtually no extractability or leachability. The total extractables after two years of storage being less than 0.01 ppm. It is also relatively impermeable to water vapor transmission and, therefore, requires no vapor barrier to maintain the proper drug concentration.

INDICATIONS AND USAGE Anticoagulant Sodium Citrate 4% w/v Solution, USP is intended for use only with automated apheresis devices.

Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]1-methyl-, monohydrochloride. Its empirical molecular formula is C 16 H 21 Cl 2 N 3 O 2 ∙HCl, and the molecular weight is 394.7. Bendamustine hydrochloride contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula: Bendamustine Hydrochloride Injection for intravenous use is supplied as a sterile, clear, and colorless to yellow solution in a multiple-dose clear glass vial. Each milliliter contains 25 mg of bendamustine hydrochloride (equivalent to 22.7 mg bendamustine free base), 0.1 g of alcohol, USP (equivalent to 0.1 g absolute ethanol), 5 mg of monothioglycerol, NF (used as an antioxidant) and q.s. to 1 mL polyethylene glycol 400, NF. Sodium hydroxide, NF is used to adjust the acidity of polyethylene glycol 400. chemical structure

BREVIBLOC (Esmolol Hydrochloride) injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride is: • (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure: • Esmolol hydrochloride has the empirical formula C 16 H 26 NO 4 Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. • Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. 11.1 BREVIBLOC Injection Dosage Forms All BREVIBLOC injection presentations are clear, colorless to light yellow, sterile, nonpyrogenic, iso‑osmotic solutions of esmolol hydrochloride in sodium chloride. The formulations for BREVIBLOC PREMIXED Injection, BREVIBLOC PREMIXED Double Strength Injection, and BREVIBLOC Injection are described in the table below: Table 4 BREVIBLOC Injection Formulations BREVIBLOC PREMIXED Injection (Esmolol Hydrochloride) BREVIBLOC PREMIXED Double Strength Injection (Esmolol Hydrochloride) BREVIBLOC Injection (Esmolol Hydrochloride) Esmolol Hydrochloride, USP 10 mg/mL 20 mg/mL 10 mg/mL Sodium Chloride, USP 5.9 mg/mL 4.1 mg/mL 5.9 mg/mL Water for Injection, USP Q.S. to volume of 250 mL Q.S. to volume of 100 mL Q.S. to volume of 10 mL Sodium Acetate Trihydrate, USP 2.8 mg/mL 2.8 mg/mL 2.8 mg/mL Glacial Acetic Acid, USP 0.546 mg/mL 0.546 mg/mL 0.546 mg/mL Sodium Hydroxide Q.S. to adjust pH to 4.5-5.5 Hydrochloric Acid Q.S. to adjust pH to 4.5-5.5 Q.S. = Quantity sufficient The calculated osmolarity of BREVIBLOC PREMIXED Injection and BREVIBLOC PREMIXED Double Strength Injection is 312 mOsmol/L. The 250 mL and 100 mL bags are non-latex, non-PVC INTRAVIA bags with dual PVC ports. The INTRAVIA bags are manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical compounds from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Esmolol hydrochloride Structural Formula

BREVIBLOC (Esmolol Hydrochloride) injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride is: • (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure: • Esmolol hydrochloride has the empirical formula C 16 H 26 NO 4 Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. • Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. 11.1 BREVIBLOC Injection Dosage Forms All BREVIBLOC injection presentations are clear, colorless to light yellow, sterile, nonpyrogenic, iso-osmotic solutions of esmolol hydrochloride in sodium chloride. The formulations for BREVIBLOC PREMIXED Injection, BREVIBLOC PREMIXED Double Strength Injection, and BREVIBLOC Injection are described in the table below: Table 4 BREVIBLOC Injection Formulations BREVIBLOC PREMIXED Injection (Esmolol Hydrochloride) BREVIBLOC PREMIXED Double Strength Injection (Esmolol Hydrochloride) BREVIBLOC Injection (Esmolol Hydrochloride) Esmolol Hydrochloride, USP 10 mg/mL 20 mg/mL 10 mg/mL Sodium Chloride, USP 5.9 mg/mL 4.1 mg/mL 5.9 mg/mL Water for Injection, USP Q.S. to volume of 250 mL Q.S. to volume of 100 mL Q.S. to volume of 10 mL Sodium Acetate Trihydrate, USP 2.8 mg/mL 2.8 mg/mL 2.8 mg/mL Glacial Acetic Acid, USP 0.546 mg/mL 0.546 mg/mL 0.546 mg/mL Sodium Hydroxide Q.S. to adjust pH to 4.5-5.5 Hydrochloric Acid Q.S. to adjust pH to 4.5-5.5 Q.S. = Quantity sufficient The calculated osmolarity of BREVIBLOC PREMIXED Injection and BREVIBLOC PREMIXED Double Strength Injection is 312 mOsmol/L. The 250 mL and 100 mL bags are non-latex, non-PVC INTRAVIA bags with dual PVC ports. The INTRAVIA bags are manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical compounds from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. BREVIBLOC Structural Formula

BREVIBLOC (Esmolol Hydrochloride) injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride is: • (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure: • Esmolol hydrochloride has the empirical formula C 16 H 26 NO 4 Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. • Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. 11.1 BREVIBLOC Injection Dosage Forms All BREVIBLOC injection presentations are clear, colorless to light yellow, sterile, nonpyrogenic, iso‑osmotic solutions of esmolol hydrochloride in sodium chloride. The formulations for BREVIBLOC PREMIXED Injection, BREVIBLOC PREMIXED Double Strength Injection, and BREVIBLOC Injection are described in the table below: Table 4 BREVIBLOC Injection Formulations BREVIBLOC PREMIXED Injection (Esmolol Hydrochloride) BREVIBLOC PREMIXED Double Strength Injection (Esmolol Hydrochloride) BREVIBLOC Injection (Esmolol Hydrochloride) Esmolol Hydrochloride, USP 10 mg/mL 20 mg/mL 10 mg/mL Sodium Chloride, USP 5.9 mg/mL 4.1 mg/mL 5.9 mg/mL Water for Injection, USP Q.S. to volume of 250 mL Q.S. to volume of 100 mL Q.S. to volume of 10 mL Sodium Acetate Trihydrate, USP 2.8 mg/mL 2.8 mg/mL 2.8 mg/mL Glacial Acetic Acid, USP 0.546 mg/mL 0.546 mg/mL 0.546 mg/mL Sodium Hydroxide Q.S. to adjust pH to 4.5-5.5 Hydrochloric Acid Q.S. to adjust pH to 4.5-5.5 Q.S. = Quantity sufficient The calculated osmolarity of BREVIBLOC PREMIXED Injection and BREVIBLOC PREMIXED Double Strength Injection is 312 mOsmol/L. The 250 mL and 100 mL bags are non-latex, non-PVC INTRAVIA bags with dual PVC ports. The INTRAVIA bags are manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical compounds from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Structural Formula

CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169ºC. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as a ready-to-use sterile, non-pyrogenic, clear, colorless to yellow, iso-osmotic solution for intravenous administration in a 200 mL GALAXY container with 20 mg (0.1 mg/mL) or 40 mg (0.2 mg/mL) nicardipine hydrochloride in either dextrose or sodium chloride. Nicardipine Hydrochloride in 4.8% Dextrose Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 48 mg dextrose hydrous, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.86% Sodium Chloride Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 8.6 mg sodium chloride, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.83% Sodium Chloride Injection 40 mg in 200 mL (0.2 mg/mL) Each mL contains 0.2 mg nicardipine hydrochloride, 8.3 mg sodium chloride, USP, 0.0384 mg citric acid, anhydrous, USP, and 3.84 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. The GALAXY container is fabricated from multilayered plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Cardene Structural Formula

CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169ºC. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as sterile, non-pyrogenic, a clear, pale yellow to yellow color solution, and essentially free from visible particles, in 10 mL single-dose vial for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride, 1 mg ascorbic acid, 0.525 mg citric acid monohydrate, 0.09 mg sodium hydroxide and 48 mg sorbitol (neosorb PF). Citric acid monohydrate and/or sodium hydroxide may have been added to adjust pH to 3.0 to 4.2. Cardene Structural Formula

CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169 o C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as a ready-to-use sterile, non-pyrogenic, clear, colorless to yellow, iso-osmotic solution for intravenous administration in a 200 mL GALAXY container with 20 mg (0.1 mg/mL) or 40 mg (0.2 mg/mL) nicardipine hydrochloride in either dextrose or sodium chloride. Nicardipine Hydrochloride in 4.8% Dextrose Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 48 mg dextrose hydrous, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.86% Sodium Chloride Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 8.6 mg sodium chloride, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.83% Sodium Chloride Injection 40 mg in 200 mL (0.2 mg/mL) Each mL contains 0.2 mg nicardipine hydrochloride, 8.3 mg sodium chloride, USP, 0.0384 mg citric acid, anhydrous, USP, and 3.84 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. The GALAXY container is fabricated from multilayered plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Cardene Structural Formula

CARDENE I.V. (nicardipine hydrochloride) is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). CARDENE I.V. for intravenous administration contains 20 mg (0.1 mg/mL) of nicardipine hydrochloride per 200 mL in either dextrose or sodium chloride or 40 mg (0.2 mg/mL) of nicardipine hydrochloride per 200 mL in sodium chloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a greenish-yellow, odorless, crystalline powder that melts at about 169ºC. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. CARDENE I.V. is available as a ready-to-use sterile, non-pyrogenic, clear, colorless to yellow, iso-osmotic solution for intravenous administration in a 200 mL GALAXY container with 20 mg (0.1 mg/mL) or 40 mg (0.2 mg/mL) nicardipine hydrochloride in either dextrose or sodium chloride. Nicardipine Hydrochloride in 4.8% Dextrose Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 48 mg dextrose hydrous, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.86% Sodium Chloride Injection 20 mg in 200 mL (0.1 mg/mL) Each mL contains 0.1 mg nicardipine hydrochloride, 8.6 mg sodium chloride, USP, 0.0192 mg citric acid, anhydrous, USP, and 1.92 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. Nicardipine Hydrochloride in 0.83% Sodium Chloride Injection 40 mg in 200 mL (0.2 mg/mL) Each mL contains 0.2 mg nicardipine hydrochloride, 8.3 mg sodium chloride, USP, 0.0384 mg citric acid, anhydrous, USP, and 3.84 mg sorbitol, NF. Hydrochloric acid and/or sodium hydroxide may have been added to adjust pH to 3.7 to 4.7. The GALAXY container is fabricated from multilayered plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Cardene Structural Formula

Baxter Cardioplegic Solution is a sterile, nonpyrogenic, essentially isotonic, formulation of electrolytes in Water for Injection, USP. It is a “core solution” intended for use only after addition of sodium bicarbonate to adjust pH prior to administration. After buffering with sodium bicarbonate it is suitable for cardiac instillation (usually with hypothermia) to induce arrest during open heart surgery. Other agents may be added to the solution prior to instillation (See INSTRUCTIONS FOR USE ). Each 100 mL of solution contains Calcium Chloride Dihydrate USP 17.6 mg, Magnesium Chloride, Hexahydrate USP 325.3 mg, Potassium Chloride USP 119.3 mg and Sodium Chloride USP 643 mg in Water for Injection, USP. May contain HCl and/or NaOH for pH adjustment. Electrolyte content per liter (not including ions for pH adjustment): Calcium (Ca ++ ) 2.4 mEq; Magnesium (Mg ++ ) 32 mEq; Potassium (K + ) 16 mEq; Sodium (Na + ) 110 mEq; Chloride (Cl - ) 160 mEq. Osmolar concentration, 304 mOsmol/liter (calc.); pH 3.8 (3.5 to 3.9) prior to sodium bicarbonate addition. It is required that 10 mL (840 mg) of 8.4% Sodium Bicarbonate Injection, USP (10 mEq each of sodium and bicarbonate) be added aseptically and thoroughly mixed with each 1000 mL of cardioplegic solution to adjust pH. Use 10 mL of Hospira 1 List 4900, 8.4% Sodium Bicarbonate Injection, USP, to achieve the approximate pH of 7.8 when measured at room temperature. Use of any other Sodium Bicarbonate Injection may not achieve this pH due to the varying pH’s of Sodium Bicarbonate Injections. Due to its inherent instability with other components, sodium bicarbonate must be added just prior to administration. After this addition, the solution must be stored under refrigeration and be used within 24 hours. The buffered admixture contains the following electrolytes (per liter): Ca ++ 2.4 mEq, Mg ++ 32 mEq, K + 16 mEq, Na + 120 mEq, Cl - 160 mEq and bicarbonate (HCO 3 - ) 10 mEq; osmolar concentration, 324 mOsmol/liter (calc.); pH 7.8 (approx.). If other agents are added, these values may be altered. The solution contains no bacteriostat, or antimicrobial agent and is intended only for use (after adjusting pH with sodium bicarbonate) in a single operative procedure. When smaller amounts are required, the unused portion should be discarded. Cardioplegic Solution with added sodium bicarbonate used as a coronary artery infusate induces cardiac arrest, combats ischemic ionic disturbances, buffers ischemic acidosis and protects energy sources for functional recovery after ischemia. Calcium Chloride, USP is chemically designated calcium chloride, dihydrate (CaCl 2 • 2 H 2 O), white fragments or granules freely soluble in water. Magnesium Chloride, USP is chemically designated magnesium chloride, hexahydrate (MgCl 2 • 6 H 2 O), deliquescent flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinyl chloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.

Cefazolin in Dextrose Injection is a frozen, premixed, iso-osmotic, sterile, nonpyrogenic, single-dose solution containing either 1 g Cefazolin, USP, equivalent to 1.05 g Cefazolin Sodium, USP per 50 mL, 2 g Cefazolin, USP, equivalent to 2.1 g Cefazolin Sodium, USP per 100 mL or 3 g Cefazolin, USP, equivalent to 3.15 g Cefazolin Sodium, USP per 150 mL Galaxy container (PL 2040 Plastic). Dextrose, USP has been added to adjust osmolality (4 % as dextrose hydrous). The approximate osmolality for Cefazolin in Dextrose Injection is 290 mOsmol/kg. Cefazolin Sodium is a semi-synthetic cephalosporin antibacterial for parenteral administration and has the following IUPAC nomenclature: Sodium (6R,7R)-3-[[(5-methyl-1,3,4- thiadiazol-2-yl)thio]methyl]-8-oxo-7-[2-(1 H -tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2- ene-2-carboxylate. Its molecular formula is C 14 H 13 N 8 O 4 S 3 ·Na and its molecular weight is 454.51 (free acid). Cefazolin Sodium USP has the following structural formula: The sodium content is 48 mg/g of cefazolin sodium. The pH of Cefazolin in Dextrose Injection may have been adjusted with sodium bicarbonate, or sodium hydroxide/hydrochloric acid during manufacture. Water for injection, USP is added as drug vehicle. Contains no preservative. The solution is intended for intravenous use after thawing to room temperature. This Galaxy container (PL 2040 Plastic) is fabricated from a specially designed multilayer plastic (PL 2040). Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. However, the suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Cefazolin Sodium, USP Structural Formula.jpg

Clindamycin Injection USP in 5% Dextrose in the GALAXY plastic container for intravenous use is composed of clindamycin phosphate equivalent to 300, 600 and 900 mg of clindamycin premixed with 5% dextrose as a sterile solution. Disodium edetate has been added at a concentration of 0.04 mg/mL. The pH has been adjusted with sodium hydroxide and/or hydrochloric acid. Clindamycin is a semisynthetic antibiotic produced by a 7(S)‑chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name of clindamycin phosphate is L- threo -α-D- galacto -Octopyranoside, methyl-7-chloro-6,7,8-trideoxy-6-[[(1-methyl-4-propyl-2-pyrrolidinyl)carbonyl]amino]‑1-thio-, 2-(dihydrogen phosphate), (2S- trans )-. The molecular formula is C 18 H 34 ClN 2 O 8 PS and the molecular weight is 504.96. The structural formula is represented below: Clindamycin Injection USP in 5% Dextrose in the GALAXY plastic containers is for Intravenous Use. The plastic container is fabricated from a specially designed multilayer plastic. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Clindamycin in 5% Dextrose Structural Formula

CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8 . Table 8: Formulas for Amino Acids Essential Amino Acids Leucine (CH 3 ) 2 CHCH 2 CH (NH 2 ) COOH Isoleucine CH 3 CH 2 CH (CH 3 ) CH (NH 2 ) COOH Valine (CH 3 ) 2 CHCH (NH 2 ) COOH Lysine (added as the hydrochloride salt) H 2 N (CH 2 ) 4 CH (NH 2 ) COOH Phenylalanine (C 6 H 5 ) CH 2 CH (NH 2 ) COOH Histidine (C 3 H 3 N 2 ) CH 2 CH (NH 2 ) COOH Threonine CH 3 CH (OH) CH (NH 2 ) COO Methionine CH 3 S (CH 2 )2 CH (NH 2 ) COOH Tryptophan (C 8 H 6 N) CH 2 CH (NH 2 ) COOH Nonessential Amino Acids Alanine CH 3 CH (NH 2 ) COOH Arginine H 2 NC (NH) NH (CH 2 )3 CH (NH 2 ) COOH Glycine H 2 NCH 2 COOH Proline [(CH 2 ) 3 NH CH] COOH Serine HOCH 2 CH (NH 2 ) COOH Tyrosine [C 6 H 4 (OH)] CH 2 CH (NH 2 ) COOH The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O) and has the following structure: Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [ see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum. Structural Formula Dexrose Hydrous, USP

15% CLINISOL - sulfite-free (Amino Acid) Injection Pharmacy Bulk Package is a sterile, clear, nonpyrogenic, hypertonic solution of essential and nonessential amino acids. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion. The VIAFLEX plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). Exposure to temperatures above 25ºC/77ºF during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological test for plastic containers as well as by tissue culture toxicity studies. Each 100 mL of 15% CLINISOL - sulfite-free (Amino Acid) Injection Pharmacy Bulk Package contains: Amino Acids Total Nitrogen pH 15.0 g 2.37 g 6.0 (5.0 to 7.0) (pH adjusted with glacial acetic acid) Essential Amino Acids Lysine - (from Lysine Acetate) C 6 H 14 N 2 O 2 Leucine - C 6 H 13 NO 2 Phenylalanine – C 9 H 11 NO 2 Valine - C 5 H 11 NO 2 Histidine - C 6 H 9 N 3 O 2 Isoleucine - C 6 H 13 NO 2 Methionine - C 5 H 11 NO 2 S Threonine - C 4 H 9 NO 3 Tryptophan - C 11 H 12 N 2 O 2 Nonessential Amino Acids Alanine - C 3 H 7 NO 2 Arginine - C 6 H 14 N 4 O 2 Glycine - C 2 H 5 NO 2 Proline - C 5 H 9 NO 2 Glutamic Acid - C 5 H 9 NO 4 Serine – C 3 H 7 NO 3 Aspartic Acid – C 4 H 7 NO 4 Tyrosine – C 9 H 11 NO 3 Anion profiles per liter* Acetate from Lysine Acetate and glacial acetic acic *Balanced by ions from amino acids Osmolarity (Calc.) 1.18 g 1.04 g 1.04 g 960 mg 894 mg 749 mg 749 mg 749 mg 250 mg 2.17 g 1.47 g 1.04 g 894 mg 749 mg 592 mg 434 mg 39 mg 127 mEq 1357 mOsmol/L

CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure: The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas: CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum. Structural Formula 1 Structural Formula 2

Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula: Cyclophosphamide is a white crystalline powder with the molecular formula C 7 H 15 Cl 2 N 2 O 2 P•H 2 O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. • 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide • 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide • 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide Cyclophosphamide Structural Formula

Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula: Cyclophosphamide is a white crystalline powder with the molecular formula C 7 H 15 Cl 2 N 2 O 2 P•H 2 O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength single-dose vials. • 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide • 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide • 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide Cyclophosphamide Structural Formula

Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula: Cyclophosphamide is a white crystalline powder with the molecular formula C 7 H 15 Cl 2 N 2 O 2 P•H 2 O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials. • 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide • 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide • 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide Cyclophosphamide Structural Formula

Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula: Cyclophosphamide is a white crystalline powder with the molecular formula C 7 H 15 Cl 2 N 2 O 2 P•H 2 O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength single-dose vials. • 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide • 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide • 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide Cyclophosphamide Structural Formula

Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula: Cyclophosphamide has a molecular formula of C 7 H 15 Cl 2 N 2 O 2 P•H 2 O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Tablets, USP are for oral use and contain 25 mg or 50 mg cyclophosphamide (anhydrous). Inactive ingredients in Cyclophosphamide Tablets are: acacia, FD&C Blue No. 1, D&C Yellow No. 10 Aluminum Lake, lactose, magnesium stearate, starch, stearic acid and talc. Cyclophosphamide Structure Formula

Cysteine hydrochloride injection, USP (cysteine hydrochloride injection) is a sterile, nonpyrogenic solution for intravenous use supplied as 500 mg/10 mL cysteine hydrochloride, USP in a single-dose vial. Each mL of cysteine hydrochloride injection, USP contains 50 mg of cysteine hydrochloride, (equivalent to 34.5 mg of cysteine), and 0.006 mL of hydrochloric acid (6M) in water for injection. Sodium hydroxide and/or hydrochloric acid are used as needed to adjust the pH. The pH range of cysteine hydrochloride injection, USP is 1.0 to 1.5. The active ingredient is cysteine hydrochloride. The chemical name of cysteine hydrochloride is L-cysteine hydrochloride monohydrate. Its molecular formula is C 3 H 7 NO 2 S • HCI • H 2 O and molecular weight is 175.63. The chemical structure of L-cysteine hydrochloride monohydrate is depicted below: Cysteine hydrochloride is a white crystalline powder soluble in water. Cysteine is a sulfur-containing amino acid and is prone to oxidation when exposed to air in aqueous solution, which may convert cysteine to insoluble cystine resulting in precipitation over time. Cysteine hydrochloride injection, USP contains no more than 145 mcg/L of aluminum. Structural Formula

Daptomycin in Sodium Chloride Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus . The chemical name is N -decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl- threo -3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ℇ1 -lactone. The chemical structure is: The empirical formula is C 72 H 101 N 17 O 26 ; the molecular weight is 1620.67. Daptomycin in Sodium Chloride Injection is a single-dose frozen, premixed, iso-osmotic, sterile, nonpyrogenic solution containing either 350 milligrams or 500 milligrams of daptomycin, per 50 mL GALAXY container (PL 2040 Plastic); or 700 milligrams or 1,000 milligrams daptomycin, per 100 mL GALAXY container (PL 2040 Plastic). Daptomycin in Sodium Chloride Injection must be a clear, slightly yellow solution. Sodium Chloride, USP (0.9%) has been added to adjust osmolality. The approximate osmolality is 320 mOsmol/kg. Monobasic Sodium Phosphate, USP and Dibasic Sodium Phosphate, USP were added as buffer agents and the pH may have been adjusted with Hydrochloric Acid, NF and/or Sodium Hydroxide, NF. Water for Injection, USP is added as drug vehicle. Contains no preservative. The solution is intended for intravenous use after thawing to room temperature. This GALAXY container (PL 2040 Plastic) is fabricated from a specially designed multilayer plastic (PL 2040). Solutions are in contact with the polyethylene layer of this container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. However, the suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Daptomycin in 0.9% Sodium Chloride Structual Formula

DAPZURA RT (daptomycin for injection) contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus . The chemical name is N -decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl- threo -3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ℇ1-lactone. The chemical structure is: The empirical formula is C 72 H 101 N 17 O 26 ; the molecular weight is 1620.67. DAPZURA RT is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized powder containing 500 mg of daptomycin for intravenous (IV) use following reconstitution [see Dosage and Administration (2.7) ]. Each vial also contains 238 mg sorbitol and 238 mg of mannitol and sodium hydroxide and/or hydrochloric acid is used to adjust the pH. The pH of the solution upon reconstitution is 6.8. Freshly reconstituted solutions of DAPZURA RT range in color from pale yellow to light brown. Daptomycin Structural Formula

Dextrose Injection, 5% and 10% USP are sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 25 mL, 50 mL, 100 mL, 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Table 1. Contents and Characteristics of Dextrose Injection 5% and 10%, USP Strength Fill Volume Amount of Dextrose Hydrous per Container kcal Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous per Container Osmolarity (mOsmol per liter) Dextrose Injection 5%, USP (0.05 grams/mL) 25 mL Quad pack 1.25 grams 4.25 252 50 mL Single pack Quad pack Multi pack 2.5 grams 8.5 252 100 mL Single pack Quad pack Multi pack 5 grams 17 252 250 mL 12.5 grams 42.5 252 500 mL 25 grams 85 252 1000 mL 50 grams 170 252 Dextrose Injection 10%, USP (0.1 grams/mL) 250 mL 25 grams 85 505 500 mL 50 grams 170 505 1000 mL 100 grams 340 505 Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula: Water for Injection, USP is chemicaly designated H2O. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Dextrose Hydrous Structural Formula

Dextrose Injection 70%, USP is a clear, sterile, nonpyrogenic, hypertonic solution of Dextrose, USP in Water for Injection in a flexible plastic container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program. Dextrose Injection is not for direct intravenous infusion [see Dosage and Administration (2.1) ] . The Pharmacy Bulk Package is designed to facilitate admixture or dilution to provide dextrose in various concentrations and is available in a 2000 mL size. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use following admixture or dilution. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Table 1. Contents and Characteristics of Dextrose Injection 70%, USP Strength Fill Volume Amount of Dextrose Hydrous, USP per container kcal Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous per Container Osmolarity (mOsmol per liter) (calc.) Dextrose Injection 70%, USP (0.7 grams/mL) 2000 mL 1400 grams 4760 3530 Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. Dextrose Injection 70%, USP contains no more than 25 mcg/L of aluminum. Dextrose is derived from corn. Structural formula of Dextrose Hydrous, USP

Dextrose Injection, 5% USP is a clear, sterile, non-pyrogenic solution of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after admixture with a single dose powdered or liquid (up to 10 mL) drug vial [see Dosage and Administration (2.1) ] . Flexible containers, designed to facilitate admixture, are available in 50 mL, and 100 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Table 1. Contents and Characteristics of Dextrose Injection 5%, USP Strength Fill Volume Amount of Dextrose Hydrous per Container kcal Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous per Container mOsmol per liter Dextrose Injection 5%, USP (0.05 grams/mL) 50 mL 2.5 grams 8.5 252 100 mL 5 grams 17 252 Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. Dextrose is derived from corn. The Mini-Bag Plus Container System is a standard diluent container with an integral drug vial adaptor. It allows for drug admixture after connection to a single dose powdered or liquid (up to 10 mL) drug vial having a 13 mm or 20 mm closure. A breakaway seal in the tube between the vial adaptor and the container is broken to allow transfer of the diluent into the vial and reconstitution of a powdered or a liquid (up to 10mL) drug. The Mini-Bag Plus product mechanically prohibits the transfer of contaminants into and out of the system during and after docking, minimizing environmental and personal exposure. The reconstituted drug is then transferred from the vial into the container diluent and mixed to result in an infusion solution for delivery to the patient. The VIAFLEX Plastic Container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. D-Glucose monohydrate Chemical Structure

Dextrose Injection, USP is sterile, non-pyrogenic solutions of Dextrose, USP in Water for Injection in a flexible plastic container for intravenous administration as a source of water and calories. Partial-fill containers, designed to facilitate admixture when necessary, are available in 250 mL, 500 mL, and 1000 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Table 1. Contents and Characteristics of Dextrose Injection 5%, USP Strength Fill Volume Amount of Dextrose Hydrous per Container kcal Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous per Container Osmolarity (mOsmol per liter) Dextrose Injection 5%, USP (0.05 grams/mL) 50 mL 2.5 grams 8.5 252 100 mL 5 grams 17 252 250 mL 12.5 grams 42.5 252 500 mL 25 grams 85 252 1000 mL 50 grams 170 252 Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. Dextrose is derived from corn. VIAFLO is a flexible plastic container fabricated from a multilayer sheeting (PL-2442) composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). Two different administration connectors are available with VIAFLO containers. The VIAFLO dripless access container (DAC) will not drip once the spike is removed. The non-DAC VIAFLO will drip once the spike is removed from the administration port. VIAFLO is not made with natural rubber latex, DEHP, or PVC. Dextrose Hydrous Structural Formula

Dihydroergotamine mesylate is ergotamine hydrogenated in the 9, 10 position as the mesylate salt. Dihydroergotamine mesylate, USP is white to slightly yellowish powder, or off white to faintly red powder. Dihydroergotamine mesylate is known chemically as ergotaman-3´,6´,18-trione,9,10-dihydro-12´-hydroxy-2´-methyl-5´-(phenylmethyl)-,(5´α)-, monomethanesulfonate. Its molecular weight is 679.78 g/mol and its empirical formula is C 33 H 37 N 5 O 5 •CH 4 O 3 S. The chemical structure is: Dihydroergotamine mesylate C 33 H 37 N 5 O 5 ●CH 4 O 3 S Mol. Wt. 679.78 g/mol Dihydroergotamine mesylate injection, USP is a clear, colorless solution supplied in sterile glass ampules for intravenous, intramuscular, or subcutaneous administration. Each mL contains 1 mg Dihydroergotamine Mesylate, USP; Alcohol, USP 6.1% by volume; Glycerin, USP 15% by weight; Water for Injection, USP; Methanesulfonic Acid and/or Sodium Hydroxide for pH adjustment (pH range is 3.4 to 4.9). structural-formula-dihydroergotamine-mesylate

Dobutamine Hydrochloride in 5% Dextrose Injection is a sterile, nonpyrogenic solution of Dobutamine Hydrochloride, USP and Dextrose, USP in Water for Injection, USP. Dobutamine hydrochloride is chemically designated as (±)-4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Dextrose Hydrous, USP is chemically designated as D-Glucopyranose monohydrate. Structural formulas are shown below: Dobutamine Hydrochloride, USP (D-Glucopyranose monohydrate) Dextrose Hydrous, USP Dobutamine Hydrochloride in 5% Dextrose Injection is intended for intravenous use only. It contains no antimicrobial agents. The pH is adjusted with sodium hydroxide and/or hydrochloric acid. Sodium bisulfite is added as a stabilizer. The solution is intended for single use only. When smaller doses are required, the unused portion should be discarded. Composition, osmolarity, pH and caloric content are given in Table 1. Table 1. Composition Approximately 5 mEq/L sodium bisulfite is added as a stabilizer. Dobutamine Hydrochloride in 5% Dextrose Injection. Dobutamine (mg/Container) Dobutamine (mcg/mL) Dextrose Hydrous, USP (g/L) Osmolarity (mOsmol/L) (calc) Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. pH kcal/L 250 mg/250 mL 1000 50 259 3.5 (2.5 to 5.5) 170 500 mg/250 mL 2000 50 266 3.5 (2.5 to 5.5) 170 1000 mg/250 mL 4000 50 280 3.5 (2.5 to 5.5) 170 This Viaflex Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 2207 Plastic). Viaflex containers, including Viaflex Plus containers, are made of flexible plastic and are for parenteral use. Viaflex Plus on the container indicates the presence of a drug additive in a drug vehicle. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Dobutamine Hydrochloride Structural Formula D-Glucopyranose monohydrate - Dextrose Hydrous Structural Formula

Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine, N- tert -butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula: Docetaxel is a white to almost-white powder with an empirical formula of C 43 H 53 NO 14 , and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection is a clear, colorless to pale yellow solution. Docetaxel Injection is sterile, non-pyrogenic, and is available in multiple-dose vials, supplied as 20 mg/2 mL, 80 mg/8 mL and 160 mg/16 mL. Each mL of Docetaxel Injection contains 10 mg docetaxel, 275.9 mg alcohol 96% (v/v), 4 mg citric acid, 648 mg polyethylene glycol 300, and 80 mg polysorbate 80. chemical-structure

Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula: Docetaxel is a white to almost-white powder with an empirical formula of C 43 H 53 NO 14 , and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration for Intravenous infusion only. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution. docetaxel-structure

Dopamine Hydrochloride and 5% Dextrose Injection, USP is a sterile, nonpyrogenic solution of Dopamine Hydrochloride, USP and Dextrose, USP in Water for Injection. Structural formulas are shown below: Dopamine Hydrochloride and 5% Dextrose Injection, USP is intended for intravenous use only. It contains no antimicrobial agents. The pH is adjusted with hydrochloric acid and is 3.5 (2.5 to 4.5). Approximately 5 mEq/L sodium bisulfite is added as a stabilizer. The solution provides a caloric content of 170 kcal/L. The solution is intended for single use only. When smaller doses are required, the unused portion should be discarded. Composition and osmolarity are given below: 800 mcg/mL Dopamine Hydrochloride and 5% Dextrose Injection, USP provides 800 mcg/mL Dopamine Hydrochloride, USP and 50 g/L Dextrose Hydrous, USP with an osmolarity of 261 mOsmol/L (calc). 1600 mcg/mL Dopamine Hydrochloride and 5% Dextrose Injection, USP provides 1600 mcg/mL Dopamine Hydrochloride, USP and 50 g/L Dextrose Hydrous, USP with an osmolarity of 269 mOsmol/L (calc). 3200 mcg/mL Dopamine Hydrochloride and 5% Dextrose Injection, USP provides 3200 mcg/mL Dopamine Hydrochloride, USP and 50 g/L Dextrose Hydrous, USP with an osmolarity of 286 mOsmol/L (calc). Dopamine administered intravenously is a myocardial inotropic agent which also may increase mesenteric and renal blood flow plus urinary output. Dopamine hydrochloride is designated chemically as 3,4-dihydroxyphenethylamine hydrochloride, a white crystalline powder freely soluble in water. Dopamine (also referred to as 3-hydroxytyramine) is a naturally occurring biochemical catecholamine precursor of norepinephrine. This VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 2207 Plastic). VIAFLEX containers, including VIAFLEX Plus containers, are made of flexible plastic and are for parenteral use. VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Dopamine Hydrochloride, USP Structural Formula Image Dextrose Hydrous, USP (D-Gluocpyranose monohydrate) Structural Formula Image

The active ingredient in DOXIL liposomal infusion is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in STEALTH liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6‑trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11‑trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27-H29 -NO11•HCl and the molecular weight is 579.99. The structural formula is: DOXIL liposomal infusion is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The STEALTH liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the STEALTH liposomes. MPEG-DSPE has the following structural formula: HSPC has the following structural formula: Representation of a STEALTH liposome: image-01-doxil-structural-formula image-02-mpge-dspe-structural-formula image-03-hspc-structural-formula image-04-stealth-liposome

Summary not available yet.

Epinephrine in 0.9% Sodium Chloride Injection is a clear, colorless sterile solution containing 16 mg (64 mcg epinephrine base per mL which is equivalent to 116.4 mcg epinephrine bitartrate) epinephrine, USP in 250 mL VIAFLO bag. In 250 ml VIAFLO bag, each 1 mL of Epinephrine in 0.9% Sodium Chloride Injection solution contains 0.032 mg edetate disodium, 9 mg sodium chloride, 0.05 mg sodium metabisulfite, water for injection. Hydrochloric acid and/or sodium hydroxide to adjust pH range of 3.4 to 4.5. This sterile solution is to be administered by the intravenous route. Epinephrine Bitartrate, USP is a sympathomimetic catecholamine (adrenergic agent) designated chemically as 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-, (R) -,[ R -( R *, R *)]-2,3-dihydroxybutanedioate (1:1) (salt), a white or greyish-white or light brownish-grey, odourless, crystalline powder. Slowly darkens on exposure to air and light. It has the following structural formula: The molecular weight of epinephrine bitartrate is 333.3 and molecular formula is C 9 H 13 NO 3 • C 4 H 6 O 6 . Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. VIAFLO container is a flexible plastic container fabricated from a multilayer sheeting composed of Polypropylene (PP), Polyamide (PA) and Polyethylene (PE). The amount of water that can permeate from the container into the overpouch is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. image-01-structural-formula-epinephrine

Esmolol hydrochloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride is: • (±)-Methyl p-[2-hydroxy-3-(isopropylamino) propoxy] hydrocinnamate hydrochloride and has the following structure: • Esmolol hydrochloride has the empirical formula C 16 H 26 NO 4 Cl and a molecular weight of 331.8. It has one asymmetric center and exists as an enantiomeric pair. • Esmolol hydrochloride is a white to off-white crystalline powder. It is a relatively hydrophilic compound which is very soluble in water and freely soluble in alcohol. Its partition coefficient (octanol/water) at pH 7.0 is 0.42 compared to 17.0 for propranolol. 11.1 Esmolol Hydrochloride Injection Dosage Forms Esmolol Hydrochloride Injection is a clear, colorless to light yellow, sterile, nonpyrogenic, iso-osmotic solution of esmolol hydrochloride in sodium chloride. The formulation is described in the table below: Table 4 Formulation for Esmolol Hydrochloride Injection Esmolol Hydrochloride, USP 10 mg/mL Sodium Chloride, USP 5.9 mg/mL Water for Injection, USP Q.S. to volume of 10 mL Sodium Acetate Trihydrate, USP 2.8 mg/mL Glacial Acetic Acid, USP 0.546 mg/mL Sodium Hydroxide Q.S. to adjust pH to 4.5-5.5 Hydrochloric Acid Q.S. to adjust pH to 4.5-5.5 Q.S. = Quantity sufficient Esmolol Hydrochloride Structural Formula

The active ingredient in Famotidine Injection is a histamine H 2 -receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C 8 H 15 N 7 O 2 S 3 and its molecular weight is 337.45. Its structural formula is: Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Famotidine Injection is supplied as a sterile solution, for intravenous use only, in plastic single dose GALAXY containers. Each 50 mL of the premixed, iso-osmotic intravenous injection contains 20 mg Famotidine, USP, and the following inactive ingredients: L-aspartic acid 6.8 mg, sodium chloride, USP, 450 mg, and Water for Injection. The pH ranges from 5.7 to 6.4 and may have been adjusted with additional L-aspartic acid and/or with sodium hydroxide. The GALAXY plastic container is fabricated from a specially designed multilayer plastic. Solutions are in contact with the polyethylene layer of the container and can leach out certain chemical components of the plastic in very small amounts within the expiration period. The suitability and safety of the plastic have been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies. Famotidine Structural Formula

Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo [1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure a calculated molecular weight of 303.3 and the following structural formula: Flumazenil is a white to off-white crystalline compound with an octanol:buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of Flumazenil compounded with 1.8 mg of Methylparaben , 0.2 mg of Propylparaben , 0.9% mg Sodium Chloride , 0.01% Edetate Disodium Dihydrate , and 0.1 mg Glacial Acetic Acid ; the pH is adjusted to 3.4 to 4.6 with Hydrochloric Acid and/or, if necessary, Sodium Hydroxide and Water for Injection q.s. to 1 mL. structure

FORANE (isoflurane, USP), a nonflammable liquid administered by vaporizing, is a general inhalation anesthetic drug. It is 1-chloro-2,2,2-trifluoroethyl difluoromethyl ether, and its structural formula is: Some physical constants are: Molecular weight 184.5 Boiling point at 760 mm Hg 48.5°C Refractive index n 20⸑ D 1.2990-1.3005 Specific gravity 25°/25°C 1.496 Vapor pressure in mm Hg** 20°C 238 25°C 295 30°C 367 35°C 450 **Equation for vapor pressure calculation: log 10 P vap = A + B ⸑ T where: A = 8.056 B = -1664.58 T = °C + 273.16 (Kelvin) Partition coefficients at 37°C Water/gas 0.61 Blood/gas 1.43 Oil/gas 90.8 Partition coefficients at 25°C – rubber and plastic Conductive rubber/gas 62.0 Butyl rubber/gas 75.0 Polyvinyl chloride/gas 110.0 Polyethylene/gas ~2.0 Polyurethane/gas ~1.4 Polyolefin/gas ~1.1 Butyl acetate/gas ~2.5 Purity by gas chromatography >99.9% Lower limit of flammability in oxygen or nitrous oxide at 9 joules/sec. and 23°C None Lower limit of flammability in oxygen or nitrous oxide at 900 joules/sec. and 23°C Greater than useful concentration in anesthesia. Isoflurane is a clear, colorless, stable liquid containing no additives or chemical stabilizers. Isoflurane has a mildly pungent, musty, ethereal odor. Samples stored in indirect sunlight in clear, colorless glass for five years, as well as samples directly exposed for 30 hours to a 2 amp, 115 volt, 60 cycle long wave U.V. light were unchanged in composition as determined by gas chromatography. Isoflurane in one normal sodium methoxide-methanol solution, a strong base, for over six months consumed essentially no alkali, indicative of strong base stability. Isoflurane does not decompose in the presence of soda lime (at normal operating temperatures), and does not attack aluminum, tin, brass, iron or copper. Forane Structural Formula

Fosaprepitant for Injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK 1 ) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2 R ,3 S )-2-[(1 R )-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1 H -1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its empirical formula is C 23 H 22 F 7 N 4 O 6 P ⋅ 2(C 7 H 17 NO 5 ) and its structural formula is: Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of Fosaprepitant for Injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (18.8 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment). Representative Structural Formula

The chemical name of foscarnet sodium is phosphonoformic acid, trisodium salt. Foscarnet sodium is a white, crystalline powder containing 6 equivalents of water of hydration with an empirical formula of Na3CO5P·6H2O and a molecular weight of 300.1. The structural formula is: Foscarnet sodium injection has the potential to chelate divalent metal ions, such as calcium and magnesium, to form stable coordination compounds. Foscarnet sodium injection is a sterile, isotonic aqueous solution for intravenous administration only. The solution is clear and colorless. Each milliliter of foscarnet sodium Injection contains 24 mg of foscarnet sodium hexahydrate in Water for Injection, USP. Hydrochloric acid may have been added to adjust the pH of the solution to 7.4. Foscarnet sodium injection contains no preservatives. Foscarnet Structural Formula

Gentamicin Sulfate, USP, a water soluble antibiotic of the aminoglycoside group, is derived from Micromonospora purpurea , and actinomycete. Gentamicin Sulfate in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution of Gentamicin Sulfate, USP in water for injection with 9 mg/mL sodium chloride (NaCl) to provide isotonicity. The solution is intended for intravenous use and requires no further dilution. pH may be adjusted with sulfuric acid or sodium hydroxide and is approximately 4.5. This VIAFLEX PLUS plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX PLUS on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX PLUS plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Gentamicin Structural Formula

Summary not available yet.

1.5% Glycine Irrigation, USP is a sterile, nonpyrogenic, nonhemolytic, nonelectrolytic or very weakly ionized solution in single dose UROMATIC containers for use as a urologic irrigating solution. Each liter contains 15 g Glycine, USP (NH 2 CH 2 COOH) in water for injection. pH 6.0 (4.5 to 6.5). Osmolarity 200 mOsmol/L (calc.). Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. No antimicrobial agent has been added. The UROMATIC plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.

Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D- glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2) > (1) > (4) > (3) > (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium in Sodium Chloride Injection is a buffered, sterile, nonpyrogenic solution of Heparin Sodium, USP derived from porcine intestinal mucosa, standardized for anticoagulant activity supplied in single dose containers for vascular administration. It contains no antimicrobial agents. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Composition, osmolarity, pH and ionic concentration are shown in Table 1. Table 1. Composition, Osmolarity, pH, and Ionic Concentration of Heparin in 0.9% Sodium Chloride Injection Product Description and Size 1,000 USP Heparin Units in 0.9% Sodium Chloride Injection, 500 mL 1,000 USP Heparin Units in 0.9% Sodium Chloride Injection, 500 mL 2,000 USP Heparin Units in 0.9% Sodium Chloride Injection, 1,000 mL 2,000 USP Heparin Units in 0.9% Sodium Chloride Injection, 1,000 mL NDC# 0338-0431-03 0338-0424-18 0338-0433-04 0338-0428-12 Manufacturing Location Jayuya, PR Toongabbie, AUS Jayuya, PR Toongabbie, AUS Heparin Sodium, USP (units/mL) 2 2 2 2 Sodium Chloride, USP (NaCl) (g/L) 9 9 9 9 Dibasic Sodium Phosphate Heptahydrate, USP (Na 2 HPO 4 *7H 2 O) (g/L) 4.34 ---- 4.34 ---- Dibasic Sodium Phosphate Dodecahydrate, USP (Na 2 HPO 4 *12H 2 O) (g/L) ---- 5.80 ---- 5.80 Citric Acid Hydrous, USP (C 6 H 8 O 7 *H 2 O) (g/L) 0.4 0.4 0.4 0.4 Osmolarity Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥ 600 mOsmol/L) may cause vein damage. (mOsmol/L) 322 322 322 322 pH 7.0 (6.0 to 8.0) 7.0 (6.0 to 8.0) 7.0 (6.0 to 8.0) 7.0 (6.0 to 8.0) Sodium (mEq/L) 186 186 186 186 Chloride (mEq/L) 154 154 154 154 Phosphate (as HPO 4 = ) (mEq/L) 32 (16 mmol/L) 32 (16 mmol/L) 32 (16 mmol/L) 32 (16 mmol/L) Citrate (mEq/L) 6 6 6 6 This VIAFLEX PLUS plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX PLUS on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX PLUS plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g ., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. Heparin Sodium Structural Formula

Hydralazine hydrochloride injection, USP is an antihypertensive available in 1 ml vial for intravenous and intramuscular administration. Each milliliter of the sterile, clear, and colorless solution contains hydralazine hydrochloride USP, 20 mg; methylparaben NF, 0.65 mg; propylparaben NF, 0.35 mg; propylene glycol USP, 103.6 mg. The pH of the solution is 3.4 to 4.0. Hydralazine hydrochloride, USP is 1-hydrazinophthalazine monohydrochloride, and its structural formula is: Molecular formula – C 8 H 8 N 4 · HCl Hydralazine hydrochloride, USP is a white to off-white, crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64 g/mol. image-01-hydralazine-structural-formula

IFEX (ifosfamide for injection, USP) single-dose vials for constitution and administration by intravenous infusion each contain 1 gram or 3 grams of sterile ifosfamide. Ifosfamide is a alkylating drug chemically related to the nitrogen mustards and a synthetic analog of cyclophosphamide. Ifosfamide is 3-(2-chloroethyl)-2-[(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide. The molecular formula is C 7 H 15 Cl 2 N 2 O 2 P and its molecular weight is 261.1. Ifosfamide is a white crystalline powder soluble in water. There are no excipients in the formulation. Each vial contains 1 gram or 3 grams of sterile ifosfamide alone. Its structural formula is: IFEX Structural Formula