auromedics pharma llc - Medication Listings

Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration ). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula: Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ , with the molecular formula C 8 H 10 N 5 NaO 3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. Acyclovir Sodium Chemical Structure

Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride (C 25 H 29 I 2 NO 3 •HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula: Amiodarone hydrochloride USP is a white or almost white, fine crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection, USP is a sterile clear, pale yellow solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride USP, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2) ]. Amiodarone Hydrochloride Chemical Structure

Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C 65 H 82 N 2 O 18 S 2 . Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is: Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated. Atracurium Besylate Chemical Structure

Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C 65 H 82 N 2 O 18 S 2 . Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is: Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple-dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated. Atracurium Besylate Chemical Structure

Cyanocobalamin injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin, USP appears as red to purplish red, crystalline powder or small crystals. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B 12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C 63 H 88 CoN 14 O 14 P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below. chemical structure

Dexrazoxane for injection, a cardioprotective agent for use in conjunction with doxorubicin, is a sterile, pyrogen-free lyophilizate intended for intravenous administration. Chemically, dexrazoxane is (S)-4,4’-(1-methyl-1,2-ethanediyl)bis-2,6- piperazinedione. The structural formula is as follows: Dexrazoxane, an intracellular chelating agent, is a derivative of EDTA. Dexrazoxane for injection is a white to off-white or pale pink lyophilized powder or cake that melts at 191° to 197°C. It is sparingly soluble in water and 0.1 N HCl, slightly soluble in ethanol and methanol, and practically insoluble in nonpolar organic solvents. The pKa is 2.1. Dexrazoxane has an octanol/water partition coefficient of 0.025 and degrades rapidly above a pH of 7.0. Each 250 mg vial contains dexrazoxane hydrochloride equivalent to 250 mg dexrazoxane. Hydrochloric Acid, NF is added for pH adjustment. When reconstituted as directed with the 25 mL vial of 0.167 Molar (M/6) sodium lactate injection, USP diluent provided, each mL contains: 10 mg dexrazoxane. The pH of the resultant solution is 3.5 to 5.5. dexrazoxane-str

Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19 H 28 BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows: Glycopyrrolate occurs as a white crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP is a sterile, clear colorless solution; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Chemical Structure

Hydroxyprogesterone Caproate Injection, USP is a sterile, long-acting preparation of the caproate ester of the naturally- occurring progestational hormone, hydroxyprogesterone, in an oil solution for intramuscular use. The chemical name for hydroxyprogesterone caproate is pregn-4-ene-3,20-dione, 17[(1-oxohexyl)oxy]. It has a molecular formula of C 27 H 40 O 4 and a molecular weight of 428.60. Hydroxyprogesterone caproate exists as white or creamy white crystalline powder. The structural formula is: Each 5 mL multiple-dose vial contains hydroxyprogesterone caproate, 250 mg/mL, in castor oil (28.6% v/v) and benzyl benzoate (46 % v/v) with the preservative benzyl alcohol (2% v/v). Chemical Structure

Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is whose molecular formula is Na 2 [Fe(CN) 5 NO] • 2H 2 O, and whose molecular weight is 297.95. Dry sodium nitroprusside USP is a reddish-brown crystals or powder, soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium Nitroprusside Injection is sterile, reddish brown color solution, essentially free from visible particles and is available as: 50 mg Vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside USP in water for injection. Chemical Structure

Zoledronic acid injection contains zoledronic acid, a bisphosphonic acid which is an inhibitor of osteoclastic bone resorption. Zoledronic acid is designated chemically as (1-Hydroxy-2-imidazol-1-yl-phosphonoethyl) phosphonic acid monohydrate and its structural formula is: Zoledronic acid monohydrate is a white to off white crystalline powder. Its molecular formula is C 5 H 10 N 2 O 7 P 2 •H 2 O and its molar mass is 290.1 g/mol. Zoledronic acid is highly soluble in 0.1N sodium hydroxide solution, sparingly soluble in water and 0.1N hydrochloric acid, and practically insoluble in organic solvents. The pH of a 0.7% solution of zoledronic acid in water is approximately 2.0. Zoledronic acid injection is available in 5 mL vials as a sterile clear, colorless liquid solution for dilution prior to intravenous infusion. Each 5 mL solution for dilution prior to intravenous infusion vial contains 4.264 mg zoledronic acid monohydrate, corresponding to 4 mg zoledronic acid on an anhydrous basis, 220 mg of mannitol, USP, water for injection, and 24 mg of sodium citrate, USP. Inactive Ingredients: Mannitol USP, water for injection, and sodium citrate USP, as buffering agent. Zoledronic Acid Monohydrate Chemical Structure