atlantic biologicals corp. - Medication Listings

Use for relief of occasional constipation (irregularity). Generally produces bowel movement in 6 to 8 hours.

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Uses relieves heartburn sour stomach acid indigestion the symptoms referred to as gas

Mirtazapine tablets, USP are an orally administered drug. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino[ 2,1-a] pyrido [ 2,3-c] benzazepine and has the empirical formula of C 17 H 19 N 3 . Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture: Mirtazapine USP is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets, USP are supplied for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine USP, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine USP. Each tablet also contains corn starch, hydroxypropyl cellulose, magnesium stearate, colloidal silicon dioxide, lactose monohydrate, hypromellose, and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black, and iron oxide yellow. Mirtazpine Structure

Mucus Relief DM ER Guaifenesin 600 mg (Expectorant) Dextromethorphan HBr 30 mg (Cough Suppressant) 12-hour Relief Controls Cough Thins & Loosens Mucus Extended-release tablets, compared to the active ingredients in Mucinex DM. TAMPER EVIDENT: DO NOT USE IF THE BLISTER UNIT IS TORN, BROKEN, OR SHOWS ANY SIGNS OF TAMPERING

Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a bland water miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Mupirocin is a naturally occurring antibiotic. The chemical name is ( )-(2 ,3 ,4 ,5 )-5-[(2 ,3 ,4 ,5 )-2,3-Epoxy-5-hydroxy-4-methylhexyl]tetrahydro-3,4-dihydroxy-β-methyl-2 -pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C H O and the molecular weight is 500.62. E S R R S S S S S H 26 44 9 The chemical structure is: CHEMICAL STRUCTURE

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Nystatin is obtained from Streptomyces noursei. It is known to be a mixture, but the composition has not been completely elucidated. Nystatin A is closely related to amphotericin B. Each is a macro-cyclic lactone containing a ketal ring, an all-trans polyene system, and a mycosamine (3-amino-3-deoxyrhamose) moiety. Structural formula: Nystatin Oral Suspension, for oral administration, contains 100,000 USP Nystatin Units per mL. Inactive ingredients: alcohol (≤ 1% v/v), sucrose 50% w/v, peppermint oil, NF, cinnamaldehyde, disodium hydrogen phosphate, USP, carboxymethylcellulose sodium, USP, glycerin, USP, saccharin sodium, USP, cherry flavor, methylparaben, NF, propylparaben, NF and purified water, USP. May also contain sodium hydroxide, NF and/ or hydrochloric acid, NF for pH adjustment. chemstructure

Nystatin is an antimycotic polyene antibiotic obtained from Streptomyces noursei . Structural formula: Nystatin Oral Suspension, for oral administration, contains 100,000 USP Nystatin Units per mL. Inactive ingredients: alcohol (≤ 1% v/v), artificial wild cherry flavor, banana flavor, D&C yellow #10, FD&C red #40, glycerin, USP, magnesium aluminum silicate, methylparaben, NF, potassium phosphate dibasic, USP, propylene glycol, USP, propylparaben, NF, purified water, USP and sucrose 33.5%. May also contain citric acid, USP for pH adjustment. image description

Nystatin is an antimycotic polyene antibiotic obtained from Streptomyces noursei . Structural formula: C 47 H 75 NO 17 MW 926.13 Nystatin Oral Suspension USP, for oral administration, contains 100,000 USP Nystatin Units per mL. Inactive ingredients: alcohol (≤ 1% v/v), cherry flavor, citric acid, D&C Yellow No. 10, FD&C Red No. 40, glycerin, magnesium aluminum silicate, methylparaben, potassium phosphate dibasic, propylene glycol, propylparaben, purified water and sucrose. Chemical structure

The active ingredient in ondansetron oral solution, USP is ondansetron hydrochloride, USP as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 5 mL of ondansetron oral solution, USP contains 5 mg of ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Ondansetron oral solution, USP contains the inactive ingredients citric acid anhydrous, glycerin, purified water, saccharin sodium, sodium benzoate, sodium citrate and strawberry flavor. Structural Formula

Directions take preferably at bedtime or as directed by a doctor. Shake Well Before Using.

Directions take preferably at bedtime or as directed by a doctor. Shake Well Before Using.

PerioGard® (Chlorhexidine Gluconate Oral rinse USP, 0.12%) is an oral rinse containing 0.12% chlorhexidine gluconate (1,1'-hexamethylene bis [5-(p-chlorophenyl) biguanide] di-D-gluconate) in a base containing water, propylene glycol, glycerin, sorbitol, polyoxyl 40 hydrogenated castor oil, flavor, cetylpyridinium chloride, and FD&C blue no. 1. PerioGard® product is a near neutral solution (pH range 5-7). Chlorhexidine gluconate is a salt of chlorhexidine and gluconic acid. Its chemical structure is: Chemical Structure

PHENOHYTRO ® ELIXIR Grape Flavored each 5 mL (teaspoonful) oral-administered dose of elixir contains: Phenobarbital, USP ( WARNING: may be habit forming) 16.2 mg Hyoscyamine Sulfate, USP 0.1037 mg Atropine Sulfate, USP 0.0194 mg Scopolamine Hydrobromide, USP 0.0065 mg Alcohol not more than 23.8% INACTIVE INGREDIENTS Purified water, glycerin, sorbitol, ethyl alcohol, sucrose, sodium saccharin, artificial grape flavor, FD&C Red No. 3, FD&C Blue No. 1. DESCRIPTION PHENOHYTRO® ELIXIR Mint Flavored each 5 mL (teaspoonful) oral-administered dose of elixir contains: Phenobarbital, USP ( WARNING: may be habit forming) 16.2 mg Hyoscyamine Sulfate, USP 0.1037 mg Atropine Sulfate, USP 0.0194 mg Scopolamine Hydrobromide, USP 0.0065 mg Alcohol not more than 23.8% INACTIVE INGREDIENTS Purified water, glycerin, sorbitol, ethyl alcohol, sucrose, sodium saccharin, artificial mint flavor, FD&C Yellow No. 5, FD&C Blue No. 1. Phenobarbital is a barbiturate with the chemical name 2,4,6(1H,3H,5H) -Pyrimidinetrione, 5-ethyl-5-phenyl-. It has the following structural formula: C12H12N2O3 Chemical Structure M.W. 232.2 Hyoscyamine sulfate is a belladonna alkaloid with the chemical name Benzeneacetic acid, α-(hydroxmethyl)-, 8-methyl-8-azabicyclo[3.2.1]oct-3-yl ester, [3(S)-endo]-, sulfate (2:1), dihydrate. It has the following structural formula: (C17H23NO3)2 ∙ H2SO4 ∙ 2H2O Chemical Structure M.W. 712.85 Atropine sulfate is belladonna alkaloid with the chemical name: Benzeneacetic acid, α-(Hydroxymethyl)benzeneacetic acid 8-methyl-8-azabicyclo[3.2.1]oct-3-yl ester. It has the following structural formula: (C34H46N2O6 ∙ H2O4S ∙ H2O Chemical Structure M.W. 694.83 Scopolamine hydrobromide is a belladonna alkaloid with the chemical name Benezeneacetic acid, α-(hydroxymethyl)-, 9-methyl-3-oxa-9-azatricyclo[3.31.0.2,4]non-[7-yl ester, hydrobromide, trihydrate, [7(S)-(1α,2β,4β,5α,7β)]-. It has the following structural formula: C17H21NO4 ∙ BrH ∙ 3H2O Chemical Structure M.W. 438.31 image description image description image description image description

Phenytoin is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is 5,5-diphenyl-2,4 imidazolidinedione, having the following structural formula: Each 5 mL of the oral suspension contains 125 mg of phenytoin, USP; carboxymethylcellulose sodium, citric acid anhydrous, FD&C yellow no. 6, magnesium aluminum silicate, orange flavor spray dry natural and artificial, polysorbate 60, purified water, sodium benzoate, sucrose and vanilla flavored powder artificial. Chemical Structure

Posaconazole is an azole antifungal agent available as delayed-release tablet for oral administration. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3 R ,5 R )-5- (2,4-difluorophenyl)tetrahydro-5- (1 H -1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1 S ,2 S )-1-ethyl-2-hydroxypropyl]-2,4-dihydro-3 H -1,2,4-triazol-3-one with an empirical formula of C 37 H 42 F 2 N 8 O 4 and a molecular weight of 700.8. The chemical structure is: Posaconazole is a white powder with a low aqueous solubility. Posaconazole delayed-release tablet is a yellow, coated, oblong tablet, debossed with “100” on one side containing 100 mg of posaconazole. Each delayed-release tablet contains the inactive ingredients: hypromellose acetate succinate, microcrystalline cellulose, hydroxypropylcellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, polyvinyl alcohol partially hydrolyzed, titanium dioxide, macrogol/polyethylene glycol 3350, talc and iron oxide yellow. image description

Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose.

Potassium chloride, USP is a white crystalline powder or colorless crystals. It is freely soluble in water and practically insoluble in ethanol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow No. 6, glycerin, methylparaben, natural & artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3.0 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow No. 6,glycerin, methylparaben, natural & artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate dihydrate, sucralose.

Prednisolone Sodium Phosphate Oral Solution (15 mg Prednisolone per 5 mL). Each 5 mL (teaspoonful) of Prednisolone Sodium Phosphate Oral Solution contains 20.2 mg prednisolone sodium phosphate (15 mg prednisolone base) in a palatable, aqueous vehicle Inactive Ingredients: Prednisolone Sodium Phosphate Oral Solution (15 mg Prednisolone per 5 mL) contains the following inactive ingredients: anti-bitter mask, corn syrup, edetate disodium, glycerin, grape flavor, hydroxyethylcellulose, methylparaben, potassium phosphate dibasic, potassium phosphate monobasic, purified water, and sodium saccharin. Prednisolone sodium phosphate occurs as white or slightly yellow, friable granules or powder. It is freely soluble in water; soluble in methanol; slightly soluble in alcohol and in chloroform; and very slightly soluble in acetone and in dioxane. The chemical name of prednisolone sodium phosphate is pregna-1,4-diene-3,20-dione,11,17-dihydroxy-21-(phosphonooxy)- disodium salt, (11b)-. The empirical formula is C 21 H 27 Na 2 O 8 P; the molecular weight is 484.39. Its chemical structure is: Pharmacological Category: Glucocorticoid structure

Prednisolone Sodium Phosphate Oral Solution (10 mg Prednisolone per 5 mL), Prednisolone Sodium Phosphate Oral Solution (15 mg Prednisolone per 5 mL), Prednisolone Sodium Phosphate Oral Solution (20 mg Prednisolone per 5 mL) and Prednisolone Sodium Phosphate Oral Solution (25 mg Prednisolone per 5 mL) are dye free, pale to light yellow solutions. Each 5 mL (teaspoonful) of Prednisolone Sodium Phosphate Oral Solution contains 13.4 mg prednisolone sodium phosphate (10 mg prednisolone base),20.2 mg prednisolone sodium phosphate (15 mg prednisolone base), 26.9 mg prednisolone sodium phosphate (20 mg prednisolone base) or 33.6 mg prednisolone sodium phosphate (25 mg prednisolone base) in a palatable, aqueous vehicle. Inactive Ingredients: Prednisolone Sodium Phosphate Oral Solution (10 mg Prednisolone per 5 mL), Prednisolone Sodium Phosphate Oral Solution (15 mg Prednisolone per 5 mL), Prednisolone Sodium Phosphate Oral Solution (20 mg Prednisolone per 5 mL) and Prednisolone Sodium Phosphate Oral Solution (25 mg Prednisolone per 5 mL) contains the following inactive ingredients: anti-bitter mask, corn syrup, edetate disodium, glycerin, grape flavor, hydroxyethylcellulose, methylparaben, potassium phosphate dibasic, potassium phosphate monobasic, purified water, and sodium saccharin. Prednisolone sodium phosphate occurs as white or slightly yellow, friable granules or powder. It is freely soluble in water; soluble in methanol; slightly soluble in alcohol and in chloroform; and very slightly soluble in acetone and in dioxane. The chemical name of prednisolone sodium phosphate is pregna-1,4-diene-3,20-dione,11,17-dihydroxy-21-(phosphonooxy)- disodium salt, (11b)-. The empirical formula is C 21 H 27 Na 2 O 8 P; the molecular weight is 484.39. Its chemical structure is: Pharmacological Category: Glucocorticoid structure

Each teaspoonful (5 mL) of Promethazine Hydrochloride Syrup (Promethazine Hydrochloride Oral Solution, USP) contains 6.25 mg promethazine HCl in a flavored syrup base with a pH between 4.9 and 5.4. Alcohol 8%(v/v). The inactive ingredients present are: anhydrous citric acid, ascorbic acid, D&C yellow No. 10, edetate disodium, FD&C blue No. 1 powder, FD&C red No. 40, glycerin, methylparaben, natural and artificial strawberry banana flavor, natural fruit punch flavor, purified water, sodium benzoate, sodium citrate, sodium propionate, sodium saccharin, and sucrose. Promethazine hydrochloride is a racemic compound; the empirical formula is C 17 H 20 N 2 S•HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10H-Phenothiazine-10-ethanamine, N,N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula: Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol. structure

Promethazine HCl and Codeine Phosphate Oral Solution contains codeine, an opioid agonist, and promethazine, a phenothiazine. Each 5 mL of Promethazine HCl and Codeine Phosphate Oral Solution contains 10 mg of codeine phosphate and 6.25 mg of promethazine hydrochloride for oral administration. Promethazine HCl and Codeine Phosphate Oral Solution has a pH between 4.8 and 5.4 and contains alcohol 8% (v/v). Promethazine HCl and Codeine Phosphate Oral Solution also contains the following inactive ingredients: anhydrous citric acid, ascorbic acid, D&C Red # 33, edetate disodium, FD&C Blue #1, methylparaben, peach-mint flavor, propylene glycol, propylparaben, purified water, saccharin sodium, sodium benzoate, sodium citrate anhydrous, sodium metabisulfite, sucrose. Codeine Phosphate The chemical name for codeine phosphate is 7,8-Didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate. Codeine is one of the naturally occurring phenanthrene alkaloids of opium derived from the opium poppy, it is classified pharmacologically as a narcotic analgesic. The phosphate salt of codeine occurs as white, needle-shaped crystals or white crystalline powder. Codeine phosphate is freely soluble in water and slightly soluble in alcohol. The molecular weight is 406.37. Its molecular formula is C 18 H 21 NO 3 •H 3 PO 4 • ½ H 2 O, and it has the following chemical structure. Promethazine Hydrochloride The chemical name for promethazine hydrochloride, a phenothiazine derivative, is (±)-10-[2- (Dimethylamino)propyl] phenothiazine monohydrochloride. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. The molecular weight is 320.88. Its molecular formula is C 17 H 20 N 2 S•HCl, and it has the following chemical structure. Codeine chem draw structure Promethazine chem draw structure

Each 5 mL (one teaspoonful), for oral administration contains: Dextromethorphan hydrobromide 15 mg; promethazine hydrochloride 6.25 mg. Alcohol 7%. Inactive Ingredients: Ascorbic acid, citric acid, D&C yellow #10, FD&C yellow #6, menthol, methylparaben, orange pineapple flavor, propylene glycol, propylparaben, purified water, saccharin sodium, sodium benzoate, sodium citrate and sucrose. Dextromethorphan hydrobromide is a salt of the methyl ether of the dextrorotatory isomer of levorphanol, a narcotic analgesic. It is chemically designated as 3-methoxy-17-methyl-9α, 13α, 14α-morphinan hydrobromide monohydrate. Dextromethorphan hydrobromide occurs as white crystals sparingly soluble in water and freely soluble in alcohol. It has a molecular weight of 370.32, a molecular formula of C 18 H 25 NO•HBr•H 2 O, and the following structural formula: Promethazine is a racemic compound. Promethazine hydrochloride, a phenothiazine derivative, is chemically designated as 10 H -Phenothiazine-10-ethanamine, N , N , α-trimethyl-monohydrochloride. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. It has a molecular weight of 320.88, a molecular formula of C 17 H 20 N 2 S•HCI, and the following structural formula: dextromethorphan-struc-form promethazine-struc-form

Propranolol Hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its molecular and structural formula, as well as molecular weight are: Propranolol Hydrochloride USP is a stable, odorless, white to off-white crystalline powder which is readily soluble in water and ethanol. Each 5 mL of Oral Solution for oral administration contains: Propranolol Hydrochloride USP ………………………….20 mg or 40 mg Alcohol……………………………………………………0.6%. Chemical Structure Inactive Ingredients Propranolol Hydrochloride Oral Solution is available for oral administration containing either 20 mg per 5 mL or 40 mg per 5 mL of propranolol hydrochloride USP. The oral solution contains the following inactive ingredients: citric acid anhydrous, crème de menthe flavor, disodium edetate, methyl paraben, propylene glycol, propylparaben, purified water, saccharin sodium, sorbitol solution and strawberry flavor.

Propranolol Hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its molecular and structural formula, as well as molecular weight are: Propranolol Hydrochloride USP is a stable, odorless, white to off-white crystalline powder which is readily soluble in water and ethanol. Each 5 mL of Oral Solution for oral administration contains: Propranolol Hydrochloride USP ………………………….20 mg or 40 mg Alcohol……………………………………………………0.6%. Chemical Structure Inactive Ingredients Propranolol Hydrochloride Oral Solution is available for oral administration containing either 20 mg per 5 mL or 40 mg per 5 mL of propranolol hydrochloride USP. The oral solution contains the following inactive ingredients: citric acid anhydrous, crème de menthe flavor, disodium edetate, methyl paraben, propylene glycol, propylparaben, purified water, saccharin sodium, sorbitol solution and strawberry flavor.

Uses for the temporary relief of minor aches and pains ask your doctor about other uses for aspirin

Risperidone oral solution contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)- 1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23 H 27 FN 4 O 2 and its molecular weight is 410.49. The structural formula is: Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone is also available as a 1 mg/mL oral solution. Risperidone Oral Solution contains the following inactive ingredients: benzoic acid, sodium hydroxide, sorbitol solution, tartaric acid, and purified water. Figure 1

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Use reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking

Directions shake well before use take preferably at bedtime or as directed by a doctor

The active ingredient in sevelamer carbonate tablets is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride (Renagel ® ). Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine- co -N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Sevelamer Carbonate Tablets: Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are acetylated monoglycerides, ammonium hydroxide, black iron oxide, colloidal silicon dioxide, crospovidone, glyceryl behenate, hydroxypropyl cellulose, hypromellose, mannitol, propylene glycol, shellac glaze and talc. Chemical Structure

Use relieves bloating, pressure and fullness commonly referred to as gas

Uses relieves the symptoms referred to as gas

Sodium Citrate and Citric Acid Oral Solution USP is a stable and pleasant-tasting systemic alkalizer containing sodium citrate and citric acid in a sugar-free base. It is a nonparticulate neutralizing buffer. Sodium Citrate and Citric Acid Oral Solution USP contains in each teaspoonful (5 mL): SODIUM CITRATE Dihydrate 500 mg (0.34 Molar) CITRIC ACID Monohydrate 334 mg (0.32 Molar) Each mL contains 1 mEq sodium ion and is equivalent to 1 mEq bicarbonate (HCO3). INACTIVE INGREDIENTS: Flavoring, polyethylene glycol, propylene glycol, purified water, sodium benzoate, and sorbitol solution.

Sodium polystyrene sulfonate is a benzene, diethenyl-polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula The drug is a cream to light brown finely ground, powdered form of sodium polystyrene sulfonate, a cation-exchange resin prepared in the sodium phase with an in vitro exchange capacity of approximately 3.1 mEq ( in vivo approximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or in an enema. Chemical Structure

Sodium Polystyrene Sulfonate Powder, for Suspension is a benzene, diethenyl-polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula: The drug is a cream to light brown finely ground, powdered form of sodium polystyrene sulfonate, a cation-exchange resin prepared in the sodium phase with an in vitro exchange capacity of approximately 3.1 mEq ( in vivo approximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or rectally as an enema. One gram of Sodium Polystyrene Sulfonate Powder, for Suspension contains 4.1 mEq of sodium. L:\Labeling Department\ANDA\Sodium Polystyrene Sulfonate_SZ- Done\Epic\Package Insert\2017.10 RLD update\Platimun\Docs for Submission\SBS\Structure

Uses temporary relief of occasional sore throat sore mouth minor mouth irritation pain associated with canker sores

Spironolactone Oral Suspension contains 25 mg of the aldosterone antagonist spironolactone, 17-hydroxy-7α-mercapto-3-oxo-17α-pregn-4-ene-21- carboxylic acid γ-lactone acetate per 5 mL, which has the following structural formula: Spironolactone is practically insoluble in water, soluble in alcohol, and freely soluble in benzene and in chloroform. Inactive ingredients include sorbic acid, potassium sorbate, citric acid anhydrous, sodium citrate dihydrate, simethicone emulsion, saccharin sodium, xanthan gum, Magnasweet 110, glycerin, banana flavor, and purified water. Chemical Structure

SSKI ® (potassium iodide oral solution, USP) is a saturated solution of potassium iodide containing 1 gram of potassium iodide per mL.

Uses relieves occasional constipation (irregularity) generally produces a bowel movement in 6 to 12 hours

Uses relieves travelers' diarrhea diarrhea upset stomach due to overindulgence in food and drink, including: heartburn indigestion nausea gas fullness belching

Uses relieves travelers' diarrhea diarrhea upset stomach due to overindulgence in food and drink, including: heartburn indigestion nausea gas fullness belching

Uses relieves occasional constipation (irregularity) this product generally produces a bowel movement within 12 to 72 hours

Sucralfate Oral Suspension contains sucralfate and sucralfate is an α-D-glucopyranoside, β-D-fructofuranosyl-, octakis-(hydrogen sulfate), aluminum complex. Sucralfate Oral Suspension for oral administration contains 1 g of sucralfate per 10 mL. Sucralfate Oral Suspension also contains: colloidal silicon dioxide, FD&C Red No. 40, wild cherry flavor (contains propylene glycol, artificial flavors, natural flavors, ethyl alcohol), glycerin, methylcellulose, methylparaben, microcrystalline cellulose, purified water, simethicone emulsion, sorbitol solution. Therapeutic category: antiulcer. Structure

Sulfamethoxazole and trimethoprim oral suspension, USP is a synthetic antibacterial combination product containing 200 mg sulfamethoxazole and 40 mg trimethoprim in each teaspoonful (5 mL). Sulfamethoxazole is N 1 -(5-methyl-3-isoxazolyl)sulfanilamide; the molecular formula is C 10 H 11 N 3 O 3 S. It is a white to off-white, practically odorless, crystalline powder, tasteless compound with a molecular weight of 253.28 and the following structural formula: Trimethoprim is 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine; the molecular formula is C 14 H 18 N 4 O 3 . It is a white or cream-colored crystals or crystalline powder with a molecular weight of 290.3 and the following structural formula: Each teaspoonful (5 mL) of the oral suspension contains 200 mg sulfamethoxazole and 40 mg trimethoprim as well as the following inactive ingredients: alcohol 0.04% (v/v), carboxymethylcellulose sodium, citric acid anhydrous, colloidal silicon dioxide, FD&C Red #40, flavour cherry #557, glycerin, methyl paraben, microcrystalline cellulose and carboxymethylcellulose sodium, polysorbate 80, purified water, saccharin sodium, sodium benzoate, and sorbitol solution. STRU 1 STRU 2

Uses relieves the symptoms referred to as gas

Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2,6-dione,3,7-dihydro-1,3-dimethyl-, and is represented by the following structural formula: Structure Structure The molecular formula of anhydrous theophylline is C 7 H 8 N 4 O 2 with a molecular weight of 180.17. Theophylline Oral Solution, USP is available as a solution intended for oral administration, containing 80 mg of theophylline anhydrous per 15 mL (one tablespoonful). Theophylline Oral Solution is alcohol free. Theophylline Oral Solution also contains the following inactive ingredients: anhydrous citric acid, glycerin, methylparaben, orange oil, polysorbate 80, propylene glycol, purified water, sodium benzoate, sodium citrate, sodium saccharin, and sorbitol solution. Theophylline Oral Solution has pH of 4.3 to 4.7. Structure formula

Valproic acid is a carboxylic acid designated as 2-propylpentanoic acid. It is also known as dipropylacetic acid. Valproic acid has the following structure: Valproic acid (pKa 4.8) has a molecular weight of 144 and occurs as a colorless liquid with a characteristic odor. It is slightly soluble in water (1.3 mg/mL) and very soluble in organic solvents. Valproic Acid Capsules are antiepileptics for oral administration. Each soft gelatin capsule contains 250 mg valproic acid. I n ac tive Ingredients Corn oil, FD&C Blue No. 1, gelatin, glycerin, purified water and titanium dioxide. undefined