asclemed usa, inc. - Medication Listings

Moxifloxacin ophthalmic solution, USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. Chemical Name: 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol[3,4b]pyridin­6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. The molecular formula for moxifloxacin hydrochloride, USP is C 21 H 24 FN 3 O 4 ∙HCl and its molecular weight is 437.9 g/mol. The chemical structure is presented below. Moxifloxacin hydrochloride is a slightly yellow to yellow crystalline powder. Each mL of moxifloxacin ophthalmic solution contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Moxifloxacin ophthalmic solution contains: Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, purified water and sodium chloride. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution, USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg. Chemical Structure

Methylprednisolone acetate injectable suspension, USP is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL. Each mL of these preparations contains: ## 40 mg/mL Methylprednisolone Acetate, USP 40 mg Polyethylene glycol 3350 29 mg Myristyl-gamma-picolinium chloride 0.195 mg Sodium chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51. The structural formula is represented below: Methylprednisolone acetate injectable suspension, USP contains methylprednisolone acetate, USP which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate, USP is a white or almost white crystalline powder which melts at about 213° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. 1 DESCRIPTION Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Chemical Structure

Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is ( E )-(2 S ,3 R ,4 R ,5 S )-5-[(2 S ,3 S ,4 S ,5 S )-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-β-methyl-2 H -pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C 26 H 44 O 9 , and the molecular weight is 500.6. The structural formula of mupirocin is: Figure 1. Structure of Murpirocin Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350. Image 1

Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure: Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains 500 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide. structure1

Uses to “revive” someone during an overdose from many prescription pain medications or street drugs such as heroin this medicine can save a life

The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen which is an NSAID and esomeprazole magnesium which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablets are combination of a nonsteroidal anti-inflammatory drug and a PPI available as modified capsule shaped, off white to yellow colored 375 mg/20 mg and 500 mg/20 mg, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen USP and 20 mg of esomeprazole (equivalent to 20.71 mg esomeprazole magnesium USP amorphous form) or 500 mg of naproxen USP and 20 mg of esomeprazole (equivalent to 20.71 mg esomeprazole magnesium USP amorphous form) for oral administration. The inactive ingredients are ammonium hydroxide, croscarmellose sodium, ferric oxide yellow, hypromellose, iron oxide black, lactose monohydrate, magnesium oxide, magnesium stearate, methacrylic acid copolymer, poloxamer, polyethylene glycol 400, povidone, propylene glycol, shellac glaze, simethicone, sodium hydroxide, sodium lauryl sulphate, talc, titanium dioxide and triethyl citrate. The chemical name for naproxen is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen has the following structure: Naproxen has a molecular weight of 230.26 and a molecular formula of C 14 H 14 O 3 . Naproxen USP is white to off-white practically odourless crystalline powder. It is soluble in chloroform, in dehydrated alcohol and in alcohol, sparingly soluble in ether and practically insoluble in water. The octanol/water partition coefficient of naproxen at pH 6.48 is 1.5. The chemical name for esomeprazole is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium amorphous. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. Its molecular formula is (C 17 H 18 N 3 O 3 S) 2 Mg with molecular weight of 713.1. The structural formula is: The esomepraozle magnesium USP is a white to pale cream colored powder. It is slightly soluble in methanol and soluble in N,N-Dimethyl formamide and practically insoluble in heptane and in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. structure1 structure2

Naproxen sodium tablets, USP are nonsteroidal anti-inflammatory drugs and available as white capsule-shape tablets, containing 275 mg or 550 mg of naproxen sodium for oral administration. Naproxen sodium is a member of the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical name for naproxen sodium is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt. Naproxen sodium has a molecular weight of 252.25 and a molecular formula of C 14 H 13 NaO 3 . It has the following structural formula: Naproxen is white to creamy crystalline powder. It is soluble in water and methanol, practically insoluble in chloroform, toluene and acetone, sparingly soluble in alcohol. Each naproxen sodium tablet, USP contains the following inactive ingredients: hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, povidone, talc, and titanium dioxide. Structural Formula

Neomycin and Polymyxin B Sulfates and Hydrocortisone Otic Solution, USP is a sterile antibacterial and anti-inflammatory solution for otic use. Each mL contains: ACTIVES : Neomycin sulfate equivalent to 3.5 mg neomycin base, polymyxin B sulfate equivalent to 10,000 polymyxin B units, and hydrocortisone 10 mg (1%); INACTIVES : Propylene Glycol, Hydrochloric Acid, Potassium Metabisulfite, Cupric Sulfate, Glycerin, Purified Water. The pH range is 2.0 to 4.5. Neomycin sulfate is the sulfate salt of neomycin B and C, which are produced by the growth of Streptomyces fradiae Waksman (Fam. Streptomycetaceae). It has a potency equivalent of not less than 600 micrograms of neomycin standard per milligram, calculated on an anhydrous basis. The structural formulae are: Polymyxin B sulfate is the sulfate salt of polymyxin B 1 and B 2 , which are produced by the growth of Bacillus polymyxa , (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per milligram, calculated on an anhydrous basis. The structural formulae are: Hydrocortisone, 11β, 17, 21 - trihydroxypregn-4-ene-3, 20-dione, is an anti-inflammatory hormone. Its structural formula is: C 21 H 30 O 5 Mol. Wt. 362.46 Neomycin Sulfate (structural formula) Polymyxin B Sulfate (structural formula) Hydrocortisone (structural formula)

Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Nitrofurantoin capsule, USP (monohydrate/macrocrystals) is a hard gelatin capsule. Each capsule contains the equivalent of 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals, USP and 75 mg of nitrofurantoin monohydrate, USP. The chemical name of nitrofurantoin macrocrystals,USP is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4-imidazolidinedione. The chemical structure is the following: Molecular Weight: 238.16 The chemical name of nitrofurantoin monohydrate, USP is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4- imidazolidinedione monohydrate. The chemical structure is the following: Molecular Weight: 256.17 Inactive Ingredients: Each capsule contains carbomer homopolymer type B (carbopol 974P ), corn starch, D & C Yellow No. 10, FD & C Blue No. 1, FD & C Red No. 40, gelatin, isopropyl alcohol, lactose monohydrate, magnesium stearate, mannitol, povidone K30, povidone K90, sodium lauryl sulphate, talc, and titanium dioxide. USP Dissolution Test is pending. Image Image

Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Nitrofurantoin capsules, USP (monohydrate/macrocrystals) are hard gelatin capsule shells containing the equivalent of 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals USP and 75 mg of nitrofurantoin monohydrate USP. The chemical name of nitrofurantoin macrocrystals USP is 1-[[[5-nitro-2-furanyl]methylene]amino]-2,4-imidazolidinedione. The chemical structure is the following: Molecular Weight: 238.16 The chemical name of nitrofurantoin monohydrate USP is 1-[[[5-nitro-2-furanyl]methylene]amino]-2,4-imidazolidinedione monohydrate. The chemical structure is the following: Molecular Weight: 256.17 Inactive Ingredients Each capsule contains carbomer 934P, colloidal silicon dioxide, corn starch, compressible sugar, D&C yellow No. 10, edible white ink, FD&C blue No. 1, FD&C red No. 40, gelatin, lactose monohydrate, magnesium stearate, povidone, talc, and titanium dioxide. Meets USP Dissolution Test 5 Chemical Structure 1 Chemical Structure 2

Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5 H -dibenzo [ a,d ]cyclohepten-5-ylidene)- N -methyl-, hydrochloride. The structural formula is as follows: Nortriptyline Hydrochloride Capsules, USP (equivalent to 10 mg, 25 mg, 50 mg and 75 mg Nortriptyline), for oral administration, contain the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, pregelatinized starch and sodium lauryl sulfate. The 10 mg, 25 mg, 50 mg and 75 mg capsule shells contain: gelatin, methylparaben, propylparaben, sodium lauryl sulfate and titanium dioxide. They may also contain: benzyl alcohol, butylparaben, edetate calcium disodium, silicon dioxide or sodium propionate. The 10 mg, 25 mg and 75 mg capsule shells also contain D&C Yellow No. 10 and FD&C Blue No. 1. chemical-structure

NP Thyroid (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).

NP Thyroid (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).

NP Thyroid® (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).

NP Thyroid® (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).

NP Thyroid® (thyroid tablets, USP) for oral use is a natural preparation derived from porcine thyroid glands. They contain both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine) providing 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) per grain of thyroid. The inactive ingredients are calcium stearate, dextrose (agglomerated) and mineral oil. Contains no ingredient made from a gluten-containing grain (wheat, barley, rye).

Ofloxacin Otic Solution 0.3% is a sterile aqueous anti-infective (antibacterial) solution for otic use. Chemically, ofloxacin has three condensed 6-membered rings made up of a fluorinated carboxyquinolone with a benzoxazine ring. The chemical name of ofloxacin is: (±)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7 H -pyrido [1,2,3- de ]-1,4-benzoxazine-6-carboxylic acid. The molecular formula of ofloxacin is C 18 H 20 FN 3 O 4 and its molecular weight is 361.38. The structural formula is: Ofloxacin otic solution contains 0.3% (3 mg/mL) ofloxacin, USP with benzalkonium chloride (0.0025%), sodium chloride (0.9%), and water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH 6.5±0.5. chemstructure.jpg

USES For the temporary relief of muscle pain and joint pain associated with: -Backache -Cramps -Soreness -Strains -Discomfort -Neckache

The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O representing a molecular weight of 293.4 g/mol. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each 8 mg ondansetron orally disintegrating tablet, USP for oral administration contains 8 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2. Chemical Structure

The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O representing a molecular weight of 293.4. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2. Chemical Structure

The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O representing a molecular weight of 293.4 g/mol. Ondansetron is a white to off-white powder. Each 8 mg ondansetron orally disintegrating tablet, USP for oral administration contains 8 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2. Chemical Structure

The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6. Chemical Structure

The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18 H 19 N 3 O•HCl•2H 2 O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6. Chemical Structure

Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI), is available as: • Capsules containing 30 mg, 45 mg, or 75 mg of oseltamivir for oral use, in the form of oseltamivir phosphate In addition to the active ingredient, each capsule contains croscarmellose sodium, povidone, pregelatinized starch, sodium stearyl fumarate and talc. The 30 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide and red iron oxide. The 45 mg capsule shell contains gelatin, titanium dioxide and black iron oxide. The 75 mg capsule shell contains gelatin, titanium dioxide, yellow iron oxide, black iron oxide and red iron oxide. Each capsule is printed with blue ink, which includes shellac, propylene glycol, strong ammonia solution and FD&C Blue No. 2 as the colorant. The botanical source for pregelatinized starch is maize starch. Oseltamivir phosphate USP is a white to off-white powder with the chemical name [3R-(3α,4β,5α)]-Ethyl 4-(acetyl amino)-5-amino-3-(1-ethylpropoxy)-1-cyclohexene-1-carboxylate phosphate (1:1). The molecular formula is C 16 H 28 N 2 O 4 .H 3 PO 4 . The relative molecular mass is 410.40 for oseltamivir phosphate salt. The structural formula is as follows: Oseltamivirphosphatestructure

Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI), is available as: ● A powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains monosodium citrate, saccharin sodium, sodium benzoate, sorbitol, titanium dioxide, tutti-frutti flavor and xanthan gum. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5-amino 3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C 16 H 28 N 2 O 4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.40 for oseltamivir phosphate salt. The structural formula is as follows: Image 1

Oseltamivir phosphate, an influenza neuraminidase inhibitor (NAI) is available as capsules containing 75 mg oseltamivir for oral use, in the form of oseltamivir phosphate USP. In addition to the active ingredient, each capsule contains pregelatinized starch, talc, povidone, croscarmellose sodium, and sodium stearyl fumarate. The 75 mg capsule shell contains gelatin, titanium dioxide, water, Iron oxide yellow, Iron oxide red and Sodium lauryl sulfate. Imprinting ink contains shellac, black iron oxide, potassium hydroxide. Oseltamivir phosphate is a White to off-white powder with the chemical name (3R, 4R, 5S) -4-acetylamino-5amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C 16 H 28 N 2 O 4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows: Chemical Structure

Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg Inactive Ingredients The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: 01 02

Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet, for oral administration contains: Oxycodone hydrochloride, USP 2.5 mg* (*2.5 mg oxycodone Hydrochloride is equivalent to 2.2409 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 5 mg* (*5 mg oxycodone Hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone Hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP 325 mg Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone Hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP 325 mg Inactive Ingredients The tablets contain: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Oxycodone and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 381.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula: Oxycodone Hydrochloride Structure Acetaminophen Structure.jpg

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone hydrochloride, USP 5 mg* Acetaminophen, USP 325 mg *(5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone) Inactive Ingredients The tablets contain pregelatinized corn starch, crospovidone, povidone, magnesium stearate, colloidal silicon dioxide, and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxy-dihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 Oxycodone and Acetaminophen Tablets, USP, contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: C 8 H 9 NO 2 MW = 151.16 Chemical Structure Chemical Structure

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride, USP 10 mg * Acetaminophen, USP 325 mg *(10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone) Inactive Ingredients The tablets contain pregelatinized corn starch, crospovidone, povidone, magnesium stearate, colloidal silicon dioxide, and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxy-dihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: C 18 H 21 NO 4 ∙HCl MW 351.82 Oxycodone and Acetaminophen Tablets, USP, contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.16. It may be represented by the following structural formula: C 8 H 9 NO 2 MW = 151.16 Chemical Structure Chemical Structure

Oxycodone hydrochloride tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 15 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: C 18 H 21 NO 4 •HCl MW=351.82 Oxycodone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized corn starch, stearic acid, D&C Yellow No. 10 (15 mg tablet) and FD&C Blue No. 2 (15 mg and 30 mg tablet). The 5 mg, 15 mg and 30 mg tablets contain the equivalent of 4.5 mg, 13.5 mg and 27.0 mg, respectively, of oxycodone free base. structure

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base. Chemical Structure

Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula: The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&C Red #30 aluminum lake, the 15 mg tablets contain D&C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&C Blue #1 aluminum lake, and the 20 mg tablets contain FD&C Blue #2 aluminum lake, FD&C Red #40 aluminum lake, and FD&C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base. structure

Uses relieves travelers' diarrhea diarrhea upset stomach due to overindulgence in food and drink, including: heartburn indigestion nausea gas belching fullness

Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α, dimethylphenethylamine hydrochloride. The structural formula is as follows: C 10 H 15 N•HCl M.W. 185.7 Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP is available as an oral capsule containing 15 mg or 30 mg of phentermine hydrochloride (equivalent to 12 mg or 24 mg of phentermine base). a) powder-filled capsules containing 15 mg phentermine hydrochloride (equivalent to 12 mg phentermine) or 30 mg phentermine hydrochloride (equivalent to 24 mg phentermine) and inactive ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, magnesium stearate. In addition, the 15 mg capsules contain black iron oxide, FD&C red No. 3, FD&C yellow No. 5, titanium dioxide; and the blue and clear 30 mg capsules contain D&C red No. 28, FD&C blue No. 1. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide. figure-02

Phentermine hydrochloride USP is a sympathomimetic amine anorectic. It has the chemical name of α,α,-Dimethylphenethylamine hydrochloride. The structural formula is as follows: C 10 H 15 N•HCl M.W. 185.7 Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as a tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP 37.5 mg contain the inactive ingredients Colloidal Silicon Dioxide, Corn Starch, FD&C Blue # 1, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose, Pregelatinized Starch (botanical source: maize), Sugar Spheres, and Stearic Acid. 59600473-figure-02

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. structure DESCRIPTION Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Chemical Structure

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. structure DESCRIPTION Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 1% mg/mL lidocaine HCl (anhyd.) 10 mg/mL sodium chloride 7 Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: image description

Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous use. Each mL contains 1000 mcg cyanocobalamin; sodium chloride 0.9%; benzyl alcohol 1.5%; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide for pH adjustment if necessary (4.5-7.0). Cyanocobalamin appears as dark, red crystals or as an amorphous or crystalline, red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The Vitamin B 12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.34%. The structural formula is represented below: image description

Bupivacaine Hydrochloride Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4) ] . Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula: Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 5 mg of bupivacaine hydrochloride (equivalent to 4.44 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. Chemical Structure DESCRIPTION Methylprednisolone acetate injectable suspension, USP is a sterile anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in 40 mg/mL strength: Each mL of these preparations contains: Methylprednisolone acetate..................................40 mg Polyethylene glycol 3350...................................29.1 mg Polysorbate 80................................................ 1.94 mg Monobasic sodium phosphate monohydrate........ 6.8 mg Dibasic sodium phosphate anhydrous USP............1.42 mg Benzyl alcohol added as a preservative............... 9.16 mg Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20- dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β) and 11β,17,21-Trihydroxy-6α-methylpregna-1,4-diene-3,20-dione 21-acetate the molecular weight is 416.51. The structural formula is represented below: Methylprednisolone acetate sterile aqueous suspension contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water. image description

Prazosin hydrochloride USP, a quinazoline derivative, is the first of a new chemical class of antihypertensives. It is the hydrochloride salt of 1-(4-amino-6,7-dimethoxy 2-quinazolinyl)-4-(2-furoyl) piperazine and its structural formula is: Molecular Formula: C 19 H 21 N 5 O 4• HCl It is white to tan powder, slightly soluble in water, in methanol, in dimethyl formamide, in dimethyl acetamide, very slightly soluble in alcohol, practically insoluble in isotonic saline, in chloroform and in acetone and has a molecular weight of 419.86. Each capsule, for oral administration, contains prazosin hydrochloride, USP equivalent (as the polyhydrate) to 1 mg, 2 mg or 5 mg of prazosin. Inert ingredients in the formulations are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The hard gelatin capsules contain gelatin and titanium dioxide. In addition, the 2 mg empty gelatin capsules contain FD&C Red No. 40, FD&C Red No. 3 and FD&C Blue No. 1; and the 5 mg empty gelatin capsules contain FD&C Red 3 and FD&C Blue No. 1. The imprinting ink also contains Black Iron Oxide, Potassium Hydroxide, Shellac. FDA approved dissolution test specifications differ from USP. Chemical Structure

Prednisolone acetate ophthalmic suspension, USP 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-diene-3, 20-dione 21-acetate and it has the following structure: Structural Formula: prednisolone acetate Each mL of prednisolone acetate ophthalmic suspension 1% contains: Active : prednisolone acetate (microfine suspension) 1% Inactives : benzalkonium chloride as preservative; boric acid; edetate disodium; hypromellose; polysorbate 80; purified water; sodium bisulfite; sodium chloride; and sodium citrate. The pH during its shelf life ranges from 5.0 - 6.0. The following structure for Prednisolone acetate ophthalmic suspension, USP 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-

Pregabalin is described chemically as ( S )-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8 H 17 NO 2 and the molecular weight is 159.23. The chemical structure of pregabalin is: Pregabalin is a white to off-white, crystalline powder with a pK a1 of 4.2 and a pK a2 of 10.6. It is sparingly soluble in water. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide and sodium lauryl sulfate. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg strengths) contain the colorants FD&C Blue 1, FD&C Red 40 and FD&C Yellow 6. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide. Chemical Structure

Pregabalin is described chemically as ( S )-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8 H 17 NO 2 and the molecular weight is 159.23. The chemical structure of pregabalin is: Pregabalin is a white or almost white powder with a pK a1 of 4.4 and a pK a2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide. pregabalinchemistrystructure

Pregabalin is described chemically as (S)-(+)-3-(Aminomethyl)-5-methylhexanoic acid. The molecular formula is C 8 H 17 NO 2 and the molecular weight is 159.23 g/mol. The chemical structure of pregabalin is: Pregabalin, USP is a white to off-white, crystalline solid with a pK a1 of 4.2 and a pK a2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of thepartition coefficient: (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the orange capsule (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) shells contain iron oxide red. The imprinting ink contains iron oxide black, potassium hydroxide, propylene glycol, strong ammonia solution and shellac. Pregabalin Structure

Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is: MW 434.50 Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol. image description

Progesterone capsules contain progesterone, USP for oral administration. Progesterone, USP has a molecular weight of 314.47 and a molecular formula of C 21 H 30 O 2 . Progesterone, USP (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is: Progesterone, USP is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain either 100 mg or 200 mg progesterone, USP. The inactive ingredients for progesterone capsules 100 mg and 200 mg include: arachis oil, D&C Yellow No. 10 aluminum lake, FD&C Yellow No. 6 aluminum lake, gelatin, glycerin, purified water, soy lecithin and titanium dioxide. chem structure

Progesterone capsules contain micronized progesterone for oral administration. Progesterone has a molecular weight of 314.47 and a molecular formula of C 21 H 30 O 2 . Progesterone (pregn-4-ene-3, 20-dione) is a white or creamy white, crystalline powder or colorless crystals practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, melting between 126º and 131ºC. The structural formula is: Progesterone is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain 100 mg or 200 mg micronized progesterone USP. The inactive ingredients for progesterone capsules include: gelatin, glycerin, hypromellose, iron oxide black, lecithin, peanut oil, propylene glycol, titanium dioxide. Chemical Structure

Progesterone USP, capsules contains micronized progesterone for oral administration. Progesterone has a molecular weight of 314.47 and a molecular formula of C 21 H 30 O 2 . Progesterone (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is: Progesterone is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain 100 mg or 200 mg micronized progesterone. The inactive ingredients for progesterone, capsules 100 mg include: ferric oxide yellow NF, gelatin NF, glycerin USP, lecithin NF, peanut oil NF, titanium dioxide USP. The inactive ingredients for progesterone, capsules 200 mg include: gelatin NF, glycerin USP, lecithin NF, peanut oil NF, titanium dioxide USP. chemical structure

Progesterone capsules contain micronized progesterone for oral administration. Progesterone has a molecular weight of 314.47 and a molecular formula of C 21 H 30 O 2 . Progesterone (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is: Progesterone is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain 100 mg or 200 mg micronized progesterone and the following inactive ingredients: peanut oil, gelatin, glycerin, soya lecithin, titanium dioxide, and triglyderides medium chain. Chemical Structure