amneal pharmaceuticals ny llc - Medication Listings

Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T 4 ) sodium]. Synthetic T 4 is identical to that produced in the human thyroid gland. Levothyroxine (T 4 ) sodium has an empirical formula of C 15 H 10 I 4 N NaO 4 • H 2 O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Chemical Structure Inactive Ingredients Colloidal silicon dioxide, lactose, magnesium stearate, microcrystalline cellulose, corn starch, acacia and sodium starch glycolate. The following are the coloring additives per tablet strength: Strength (mcg) Color Additive(s) 25 FD&C Yellow No. 6 Aluminum Lake 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake 112 D&C Red No. 27 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake

Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N -dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below: Metformin hydrochloride extended-release tablets, USP is a white to off-white crystalline compound with a molecular formula of C 4 H 11 N 5 • HCl and a molecular weight of 165.63. Metformin hydrochloride extended-release tablets, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride extended-release tablets, USP is 6.68. Metformin hydrochloride extended-release tablets, USP contain 500 mg or 750 mg of metformin hydrochloride, USP as active ingredient. Metformin hydrochloride extended-release tablets, USP 500 mg and 750 mg contain the inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, povidone, sodium carbonate anhydrous, talc and xanthan gum. USP Dissolution Test pending. System Components and Performance - Metformin hydrochloride extended-release tablets, comprise a dual hydrophilic polymer matrix system. Metformin hydrochloride is combined with a drug release controlling polymer to form an "inner" phase, which is then incorporated as discrete particles into an "external" phase of a second polymer. After administration, fluid from the gastrointestinal (GI) tract enters the tablet, causing the polymers to hydrate and swell. Drug is released slowly from the dosage form by a process of diffusion through the gel matrix that is essentially independent of pH. The hydrated polymer system is not rigid and is expected to be broken up by normal peristalsis in the GI tract. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass. 10

Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α 1 -[( tert -Butylamino) methyl]- 4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula: The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively. Each tablet also contains the following inactive ingredients: lactose monohydrate, magnesium stearate, pregelatinized (corn) starch and sodium lauryl sulfate. structure

The active ingredient of Albuterol Sulfate Inhalation Aerosol is albuterol sulfate, USP, a racemic salt, of albuterol, USP. Albuterol sulfate, USP has the chemical name α 1 -[( tert -butylamino) methyl]-4-hydroxy- m -xylene-α,α'-diol sulfate (2:1) (salt), and has the following chemical structure: The molecular weight of albuterol sulfate, USP is 576.7, and the empirical formula is (C 13 H 21 NO 3 ) 2 •H 2 SO 4 . Albuterol sulfate, USP is a white to off-white crystalline powder. It is soluble in water and slightly soluble in ethanol. Albuterol sulfate, USP is the official generic name in the United States, and salbutamol sulfate is the World Health Organization recommended generic name. Albuterol Sulfate Inhalation Aerosol is a pressurized metered-dose aerosol unit with a dose counter. Albuterol Sulfate, USP is for oral inhalation only. It contains a microcrystalline suspension of albuterol sulfate, USP in propellant HFA-134a (1, 1, 1, 2-tetrafluoroethane) and ethanol. Prime the inhaler before using for the first time and in cases where the inhaler has not been used for more than 2 weeks by releasing three sprays into the air, away from the face. After priming, each actuation delivers 108 mcg albuterol sulfate, USP, from the actuator mouthpiece (equivalent to 90 mcg of albuterol, USP base). Each canister provides 200 actuations (inhalations). This product does not contain chlorofluorocarbons (CFCs) as the propellant. Structural Formula

Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, that are readily absorbed from the gastrointestinal tract. The chemical formula for prednisone is C 21 H 26 O 5 . Chemically, it is 17,21-dihydroxypregna-1,4-diene- 3,11,20-trione and has the following structure: Prednisone, USP is a white or practically white, crystalline powder and has a molecular weight of 358.4 g/mol. It melts at about 234°C. Prednisone, USP is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Prednisone tablets, USP contain 1 mg or 5 mg of prednisone, USP. The inactive ingredients for prednisone tablets, USP include: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate type A and stearic acid. Meets USP Dissolution Test 2. ty

Prednisone tablets, USP contain prednisone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione. Its molecular formula is C 21 H 26 O 5 and its molecular weight is 358.4 g/mole. The structural formula is represented below: Prednisone tablets, USP are available in 2 strengths: 10 mg and 20 mg. Inactive Ingredients: Lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate type A. Meets USP Dissolution Test 2. ACTIONS Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body's immune responses to diverse stimuli. structure

Ibuprofen tablets contain the active ingredient ibuprofen, which is (±) - 2 - ( p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74° to 77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below: Ibuprofen tablets, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, talc, magnesium stearate, Opadry II contains hypromellose, polyethylene glycol, sodium citrate, lactose monohydrate and titanium dioxide. chem structure

Sildenafil citrate, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate, USP is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H -pyrazolo [4,3- d ] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula: Sildenafil citrate, USP is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil for Oral Suspension: Sildenafil for oral suspension is supplied as white to off-white powder containing 1.57 g of sildenafil citrate, USP (equivalent to 1.12 g sildenafil) in an amber glass bottle intended for reconstitution. Following reconstitution with 90 mL water, the total volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include anhydrous citric acid, colloidal silicon dioxide, grape flavor, sodium benzoate, sodium citrate dihydrate, sorbitol, sucralose, titanium dioxide, and xanthan gum. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided. Structural formula

Sildenafil citrate, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA ® for erectile dysfunction. Sildenafil citrate, USP is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H -pyrazolo [4,3- d ] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate (1:1) and has the following structural formula: Sildenafil citrate, USP is a white or almost white, slightly hygroscopic crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.70 g/mol. Sildenafil for Oral Suspension: Sildenafil for oral suspension is supplied as white to off-white powder containing 1.57 g of sildenafil citrate, USP (equivalent to 1.12 g sildenafil) in an amber glass bottle intended for reconstitution. Following reconstitution with 90 mL water, the total volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include anhydrous citric acid, colloidal silicon dioxide, grape flavor, sodium benzoate powder, sodium citrate dihydrate, sorbitol, sucralose, titanium dioxide, and xanthan gum. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided.

Sildenafil tablets, USP an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate, USP is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1 H -pyrazolo[4,3- d ]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula: Sildenafil citrate, USP is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil tablets, USP are formulated as white to off-white, oval shaped film-coated tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate USP, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. 10

Ciprofloxacin (ciprofloxacin hydrochloride, USP) tablets, USP is a synthetic antimicrobial agent for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C 17 H 18 FN 3 O 3 •HCl•H 2 O and its chemical structure is as follows: Ciprofloxacin, USP is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C 17 H 18 FN 3 O 3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows: Each film coated tablet, for oral administration contains ciprofloxacin hydrochloride, USP equivalent to 250 mg, 500 mg or 750 mg of ciprofloxacin USP, respectively. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, talc, and titanium dioxide. Ciprofoxacin HCl Structural Formula Ciprofoxacin Structural Formula

Tramadol hydrochloride tablets USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis -2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is: The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride, USP is a white or almost white crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide. 1

Tramadol hydrochloride tablets USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis -2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is: The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide. 10

Amphetamine sulfate, USP is a sympathomimetic amino of the amphetamine group. It is a white powder. It has a slightly bitter taste. Its solutions are acid to litmus, having a pH of 5 to 8. It is freely soluble in water, slightly soluble in alcohol and practically insoluble in ether. Each tablet, for oral administration contains 5 mg or 10 mg of amphetamine sulfate, USP. Each tablet also contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, microcrystalline cellulose, stearic acid, and talc. The 10 mg tablet also contains FD&C Blue #1 aluminum lake. Structural Formula: 1

Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine transdermal system 5 mcg/hr 6.25 5 Buprenorphine transdermal system 7.5 mcg/hr 9.375 7.5 Buprenorphine transdermal system 10 mcg/hr 12.5 10 Buprenorphine transdermal system 15 mcg/hr 18.75 15 Buprenorphine transdermal system 20 mcg/hr 25 20 Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone. Structural Formula Figure 1: Cross-Section

Naproxen oral suspension, USP is available as a light orange-colored opaque orange-pineapple flavored oral suspension containing 125 mg/5 mL of naproxen, USP for oral administration. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical name is (+)-(S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. The molecular weight is 230.26 Its molecular formula is C 14 H 14 O 3 , and it has the following chemical structure. Naproxen, USP is an odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen, USP at pH 7.4 is 1.6 to 1.8. The inactive ingredients in naproxen oral suspension, USP include artificial pineapple flavor, FD&C Yellow No. 6, fumaric acid, magnesium aluminum silicate, methylparaben, natural orange flavor, purified water, sodium chloride (38.95 mg/5 mL, 1.69 mEq), sorbitol solution, sucrose and xanthan gum. The pH of the suspension ranges from 2.2 to 3.7. Structural Formula

Abiraterone acetate, USP the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains either 250 mg or 500 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-acetoxy-17-(3-pyridinyl)androsta-5,16-diene and its structure is: Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C 26 H 33 NO 2 and it has a molecular weight of 391.55 g/mol. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg uncoated tablets and 500 mg film-coated tablets with the following inactive ingredients: 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, silicified microcrystalline cellulose, and sodium lauryl sulfate. The coating, Opadry ® II Purple, contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Abiraterone acetate tablets USP, 250 mg meets USP Dissolution Test 3. Abiraterone acetate tablets USP, 500 mg meets USP Dissolution Test 2. 1

Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains either 250 mg or 500 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is: Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C 26 H 33 NO 2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg uncoated tablets and 500 mg film-coated tablets with the following inactive ingredients: 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate. 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, silicified microcrystalline cellulose, and sodium lauryl sulfate. The coating, Opadry ® II Purple, contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Abiraterone acetate tablets USP, 250 mg meets USP Dissolution Test 3. Abiraterone acetate tablets USP, 500 mg meets USP Dissolution Test 2. 1

Aminocaproic acid, USP is 6-aminohexanoic acid, which acts as an inhibitor of fibrinolysis. Its chemical structure is: Aminocaproic acid, USP is freely soluble in water, in acid, and in alkaline solutions, slightly soluble in methanol and in alcohol, practically insoluble in chloroform and in ether. Aminocaproic acid oral solution, USP for oral administration, contains 0.25 g/mL of aminocaproic acid, USP with methylparaben 0.20%, propylparaben 0.05%, edetate disodium 0.30% as preservatives and the following inactive ingredients: sodium saccharin, sorbitol, citric acid anhydrous, glycerin, propylene glycol, purified water, natural and artificial raspberry flavor. 1

Aminocaproic acid is 6-aminohexanoic acid, which acts as an inhibitor of fibrinolysis. Its chemical structure is: Aminocaproic acid, USP is a fine, white to almost white, crystalline powder. It is freely soluble in water, in acids, and in alkaline solutions; it is slightly soluble in methanol and practically insoluble in chloroform and in ether. Each aminocaproic acid tablet, USP for oral administration contains 500 mg of aminocaproic acid, USP and the following inactive ingredients: crospovidone type B, magnesium stearate, povidone and stearic acid. Meets USP Dissolution Test 2. 10

Amlodipine and olmesartan medoxomil provided as a tablet for oral administration, is a combination of the calcium channel blocker (CCB) amlodipine besylate, USP and the angiotensin II receptor blocker (ARB) olmesartan medoxomil, USP. The amlodipine besylate, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate,monobenzenesulphonate. Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S. Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil, USP component of amlodipine and olmesartan medoxomil tablets, USP is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[ p -(o-1 H -tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C 29 H 30 N 6 O 6 . The structural formula for amlodipine besylate, USP is: The structural formula for olmesartan medoxomil, USP is: Amlodipine and olmesartan medoxomil tablets, USP contain amlodipine besylate, USP a white or almost white powder, and olmesartan medoxomil, USP a white to off-white crystalline powder. The molecular weights of amlodipine besylate, USP and olmesartan medoxomil, USP are 567.1 and 558.59, respectively. Amlodipine besylate, USP is slightly soluble in 2-propanol, water, freely soluble in methanol and sparingly soluble in ethanol. Olmesartan medoxomil, USP is practically insoluble in water and sparingly soluble in methanol. Each tablet of amlodipine and olmesartan medoxomil also contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, colloidal silicon dioxide and magnesium stearate. The color coatings contain polyvinyl alcohol, macrogol/ polyethylene glycol 3350, macrogol/ polyethylene glycol 8000, titanium dioxide, talc, iron oxide yellow (5/40 mg, 10/20 mg, 10/40 mg tablets), iron oxide red (10/20 mg and 10/40 mg tablets), and iron oxide black (10/40 mg tablets). USP Dissolution Test is pending. Amlodipine Chemical Structure Olmesartan Chemical Structure

Atropine Sulfate Ophthalmic Solution USP, 1% contains atropine, an anticholinergic, in a sterile colorless, clear solution for topical ophthalmic use. The active ingredient is represented by the chemical structure: Chemical Name: Benzeneacetic acid, α-(hydroxymethyl)-, 8-methyl-8-azabicyclo-[3.2.1]oct-3-yl ester, endo –(±), sulfate (2:1) (salt), monohydrate. Molecular Formula: (C 17 H 23 NO 3 ) 2 • H 2 SO 4 • H 2 O Molecular Weight: 694.83 g/mol Each mL of atropine sulfate ophthalmic solution USP, 1% contains: Active: atropine sulfate, USP 10 mg equivalent to 8.3 mg of atropine. Inactives: benzalkonium chloride 0.1 mg (0.01%), dibasic sodium phosphate, edetate disodium, hypromellose (2910), monobasic sodium phosphate, hydrochloric acid and/or sodium hydroxide may be added to adjust pH (3.5 to 6.0) and water for injection USP. ab

Azathioprine, an immunosuppressive antimetabolite, is available in tablet form for oral administration. Each scored tablet contains 50 mg, 75 mg or 100 mg azathioprine, USP and the inactive ingredients anhydrous lactose, magnesium stearate, povidone, pregelatinized starch (corn starch), and stearic acid. Azathioprine is chemically 1 H -Purine, 6-[(1-methyl-4-nitro-1 H -imidazol-5-yl)thio]. The structural formula of azathioprine is: It is an imidazolyl derivative of 6-mercaptopurine and many of its biological effects are similar to those of the parent compound. Azathioprine, USP is insoluble in water, but may be dissolved with addition of one molar equivalent of alkali. Azathioprine, USP is stable in solution at neutral or acid pH but hydrolysis to mercaptopurine occurs in excess sodium hydroxide (0.1N), especially on warming. Conversion to mercaptopurine also occurs in the presence of sulfhydryl compounds such as cysteine, glutathione and hydrogen sulfide. 1

Azathioprine, an immunosuppressive antimetabolite, is available in tablet form for oral administration. Each scored tablet contains 50 mg azathioprine, USP and the inactive ingredients anhydrous lactose, magnesium stearate, povidone, pregelatinized starch (corn starch), and stearic acid. Azathioprine is chemically 1 H -Purine, 6-[(1-methyl-4-nitro-1 H -imidazol-5-yl)thio]-. The structural formula of azathioprine is: It is an imidazolyl derivative of 6-mercaptopurine and many of its biological effects are similar to those of the parent compound. Azathioprine, USP is insoluble in water, but may be dissolved with addition of one molar equivalent of alkali. Azathioprine, USP is stable in solution at neutral or acid pH but hydrolysis to mercaptopurine occurs in excess sodium hydroxide (0.1N), especially on warming. Conversion to mercaptopurine also occurs in the presence of sulfhydryl compounds such as cysteine, glutathione and hydrogen sulfide. 1

Uses temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: nasal congestion runny nose sneezing itchy nose

The active component of beclomethasone dipropionate HFA inhalation aerosol 40 mcg inhalation aerosol and beclomethasone dipropionate HFA inhalation aerosol 80 mcg inhalation aerosol is beclomethasone dipropionate, USP, a corticosteroid having the chemical name 9-chloro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate. Beclomethasone dipropionate, USP (BDP) is a diester of beclomethasone, a synthetic corticosteroid chemically related to dexamethasone. Beclomethasone differs from dexamethasone in having a chlorine at the 9-alpha carbon in place of a fluorine, and in having a 16 beta-methyl group instead of a 16 alpha-methyl group. Beclomethasone dipropionate, USP is a white to creamy white, odorless powder with a molecular formula of C 28 H 37 ClO 7 and a molecular weight of 521.1. Its chemical structure is: Beclomethasone dipropionate HFA inhalation aerosol is a pressurized, metered-dose aerosol with a dose counter intended for oral inhalation only. Each unit contains a solution of beclomethasone dipropionate, USP in propellant HFA-134a (1,1,1,2 tetrafluoroethane) and ethanol. Beclomethasone dipropionate HFA inhalation aerosol 40 mcg delivers 40 mcg of beclomethasone dipropionate, USP from the actuator and 50 mcg from the valve. Beclomethasone dipropionate HFA inhalation aerosol 80 mcg delivers 80 mcg of beclomethasone dipropionate, USP from the actuator and 100 mcg from the valve. Both products deliver 50 microliters (59 milligrams) of solution formulation from the valve with each actuation. The 40 mcg canisters and the 80 mcg canisters provide 120 inhalations each. Beclomethasone dipropionate HFA inhalation aerosol should be "primed" or actuated twice prior to taking the first dose from a new canister, or when the inhaler has not been used for more than 10 days. Avoid spraying in the eyes or face while priming beclomethasone dipropionate HFA inhalation aerosol. This product does not contain chlorofluorocarbons (CFCs). Structural Formula

Bexarotene capsules contain bexarotene, a member of a subclass of retinoids that selectively activate retinoid X receptors (RXRs). These retinoid receptors have biologic activity distinct from that of retinoic acid receptors (RARs). The chemical name of bexarotene is 4-[1-(5,6,7,8-tetrahydro-3,5,5,8,8-pentamethyl-2-naphthalenyl) ethenyl] benzoic acid, and the structural formula is as follows: Bexarotene is an off-white to white powder with a molecular weight of 348.48 and a molecular formula of C 24 H 28 O 2 . It is insoluble in water and slightly soluble in vegetable oils and ethanol, USP. Each bexarotene capsule contains 75 mg of bexarotene for oral administration. It also contains the following inactive ingredients: butylated hydroxyanisole, polyethylene glycol 400, polysorbate 20 and povidone. The capsule shell contains gelatin, glycerin, purified water, sorbitol sorbitan solution, and titanium dioxide. The imprinting ink contains ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac glaze. Structural Formula

Bexarotene gel, 1% contains bexarotene and is intended for topical application only. Bexarotene is a member of a subclass of retinoids that selectively activate retinoid X receptors (RXRs). These retinoid receptors have biologic activity distinct from that of retinoic acid receptors (RARs). The chemical name is 4-[1-(3,5,5,8,8-pentamethyl-5,6,7,8-tetrahydronaphthalen-2-yl)ethenyl] benzoic acid, and the structural formula is as follows: Bexarotene is a white to off-white powder with a molecular weight of 348.478 and a molecular formula of C 24 H 28 O 2 . It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in acetone, soluble in dimethyl sulfoxide, slightly soluble in ethanol and very slightly soluble in vegetable oil. Bexarotene gel, 1% is a clear gelled solution containing 1.0% (w/w) bexarotene in a base of dehydrated alcohol, polyethylene glycol 400, hydroxypropyl cellulose, and butylated hydroxytoluene. Structural Formula

Bimatoprost is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1-pentenyl]cyclopentyl]-5-N-ethylheptenamide and its molecular weight is 415.58 g/mol. Its molecular formula is C 25 H 37 NO 4 . Its chemical structure is: Bimatoprost is a white to an off-white powder, which is soluble in methanol and alcohol. Bimatoprost ophthalmic solution, 0.01% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg (260 mOsmol/kg to 330 mOsmol/kg). Each mL of Bimatoprost ophthalmic solution 0.01% contains: Active: Bimatoprost, 0.1 mg Preservative: Benzalkonium chloride, 0.15 mg Inactives: Citric acid monohydrate; sodium chloride; sodium phosphate dibasic heptahydrate; and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8 to 7.8. 1

Bromfenac ophthalmic solution, 0.07% is a sterile, nonsteroidal anti-inflammatory drug (NSAID) for topical ophthalmic use. Each mL of bromfenac ophthalmic solution contains 0.805 mg bromfenac sodium sesquihydrate (equivalent to 0.7 mg bromfenac free acid). The USAN name for bromfenac sodium sesquihydrate is bromfenac sodium. Bromfenac sodium is designated chemically as sodium 2-amino-3-(4-bromobenzoyl) phenylacetate sesquihydrate, with a molecular formula of C 15 H 11 BrNNaO 3 •1.5 H 2 O. The chemical structure for bromfenac sodium sesquihydrate is: Bromfenac sodium is a bright orange to yellow powder. It is freely soluble in water, soluble in methanol and very slightly soluble in chloroform, dilute acid and diluted base. The molecular weight of bromfenac sodium is 383.17 g/mol. Bromfenac ophthalmic solution is a clear, yellow solution and supplied as a sterile aqueous 0.07% solution, with a pH of 7.8. The osmolality of bromfenac ophthalmic solution is approximately 300 mOsmol/kg. Each mL of bromfenac ophthalmic solution contains: Active: Each mL contains bromfenac sodium sesquihydrate 0.0805%, which is equivalent to bromfenac free acid 0.07%. Inactives: boric acid, edetate disodium, povidone, sodium borate, sodium sulfite, tyloxapol, sodium hydroxide to adjust pH, and water for injection, USP. Preservative: benzalkonium chloride 0.005%. 1

Bumetanide is a loop diuretic available as 0.5 mg, 1 mg and 2 mg tablets for oral administration; each tablet also contains the following inactive ingredients: anhydrous lactose, magnesium stearate, maize starch, microcrystalline cellulose, pregelatinized starch and talc. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder having a calculated molecular weight of 364.42, and the following structural formula: C 17 H 2 0N 2 O 5 S Meets USP Dissolution Test 2. structure

Cabergoline tablets, USP contain cabergoline, USP a dopamine receptor agonist. The chemical name for cabergoline is 1-[(6-allylergolin-8β-yl)-carbonyl]-1-[3-(dimethylamino) propyl]-3-ethylurea. Its molecular formula is C 26 H 37 N 5 O 2 , and its molecular weight is 451.62 g/mol. The structural formula is as follows: Cabergoline, USP is a white or almost white crystalline powder practically insoluble in water and hexane, very soluble in ethanol, chloroform, acetone, dichloromethane, soluble in 0.1M HCl and freely soluble in toluene. Cabergoline tablets, USP for oral administration, contain 0.5 mg of cabergoline, USP. Inactive ingredients consist of citric acid anhydrous powder, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. chemical structure

Carbidopa and levodopa extended-release tablets, USP are extended-release combination of carbidopa and levodopa for the treatment of Parkinson’s disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white to creamy white, odorless or practically odorless powder, freely soluble in 3N hydrochloric acid; slightly soluble in water and in methanol; practically insoluble in alcohol, in acetone, in chloroform, and in ether, with a molecular weight of 244.24 g/mol. It is designated chemically as (-)-L-α- hydrazino-3,4-dihydroxy-α-methyldrocinnamic acid monohydrate. Its molecular formula is C 10 H 14 N 2 O 4 •H 2 O, and its structural formula is: Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.23 g/mol. Levodopa, USP an aromatic amino acid, is a white to off-white crystalline powder, freely soluble in 3N hydrochloric acid, slightly soluble in water and insoluble in alcohol, with a molecular weight of 197.19 g/mol. It is designated chemically as (2S)-2-Amino-3-(3,4-dihydroxyphenyl) propanoic acid. Its molecular formula is C 9 H 11 NO 4 , and its structural formula is: Carbidopa and levodopa extended-release tablets, USP are supplied as extended-release tablets containing either 50 mg of carbidopa and 200 mg of levodopa, or 25 mg of carbidopa and 100 mg of levodopa. Inactive ingredients: hydroxypropyl cellulose, lake blend purple (contains FD&C Red No. 40, FD &C Blue No. 2) and magnesium stearate. The 50 mg/200 mg tablets are supplied as purple, oval, convex tablets, debossed with “G” left of bisect on one side and “391” on the other side with mottled appearance. The 25 mg/100 mg tablets are supplied as purple, oval, convex tablets, debossed with “G” on one side and “392” on other side with mottled appearance. The carbidopa and levodopa extended-release tablets are polymeric-based drug delivery system that controls the release of carbidopa and levodopa as it slowly erodes. Carbidopa and levodopa extended-release tablet, 25 mg/100 mg is available to facilitate titration and as an alternative to the half-tablet of carbidopa and levodopa extended-release tablet, 50 mg/200 mg. Meets USP Dissolution Test 2. 1 1

Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1 -blocking activity. It is (2 RS )-1-(9 H -Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemiethanolate. It is a racemic mixture with the following structure: Carvedilol phosphate is a white to almost-white solid with a molecular weight of 527.47 (406.5 carvedilol free base) and a molecular formula of C 24 H 26 N 2 O 4 •H 3 PO 4 •1/2 EtOH. Carvedilol phosphate is available for once-a-day administration as extended-release oral capsules containing 10 mg, 20 mg, 40 mg, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate extended-release microparticles that are drug-layered and then coated with methacrylic acid copolymers. Inactive ingredients include corn starch, crospovidone, hydrogenated cottonseed oil, hydroxypropyl cellulose, magnesium stearate, methacrylic acid copolymer type C, polyvinyl alcohol, povidone, silicon dioxide, soybean lecithin, sucrose, talc, titanium dioxide, triethyl citrate and xanthan gum. The 10 mg capsule shells contain D&C Yellow No. 10, FD&C Green No. 3, gelatin and titanium dioxide. The 20 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Red No. 40, gelatin and titanium dioxide. The 40 mg capsule shells contain D&C Red No. 28, D&C Yellow No. 10, FD&C Green No. 3, FD&C Red No. 40, gelatin and titanium dioxide. The 80 mg capsule shells contain gelatin and titanium dioxide. Additionally, the capsule imprint ink contains FD&C Blue No. 1, FD&C Blue No. 2, D&C Yellow No. 10, FD&C Red No. 40, iron oxide black and shellac. Chemical Structure

Chlordiazepoxide hydrochloride and clidinium bromide capsules, USP are a fixed-combination of chlordiazepoxide hydrochloride, a benzodiazepine, and clidinium bromide, an anticholinergic. Each chlordiazepoxide hydrochloride and clidinium bromide capsules, USP contain the active ingredients 5 mg chlordiazepoxide hydrochloride, USP and 2.5 mg clidinium bromide, USP. Each capsule also contains the inactive ingredients D&C Yellow No. 10, FD & C Blue 1, FD&C Green No. 3, gelatin, hydrogenated castor oil, lactose monohydrate, maize starch, titanium dioxide, and purified water. Each capsule is imprinted with black pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, ferrosoferric oxide, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution. Chlordiazepoxide hydrochloride, USP is 7-chloro-2-(methylamino)-5-phenyl-3 H -1,4-benzodiazepine 4-oxide monohydrochloride. A white to slightly yellow crystalline powder, it is sparingly soluble in alcohol (ethanol 96%) and insoluble in hexane. It is unstable in solution and the powder must be protected from light. The molecular formula is C 16 H 15 Cl 2 N 3 O and molecular weight is 336.22 g/mol. The structural formula of chlordiazepoxide hydrochloride, USP is as follows: Clidinium bromide, USP is a synthetic anticholinergic agent which has been shown in experimental and clinical studies to have an antispasmodic and antisecretory effects on the gastrointestinal tract. Clidinium bromide, USP is white to off white crystalline powder. It is soluble in methanol and practically insoluble in ether. The chemical name is (±)-3-hydroxy-1-methylquinuclidinium bromide benzilate, molecular formula is C 22 H 26 BrNO 3 and molecular weight is 432.36 g/mol. Structurally, clidinium bromide, USP is: Meets USP Dissolution Test 2. 1 1

Chlorpromazine hydrochloride, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula: Chlorpromazine hydrochloride, USP is a white to almost white crystalline powder. It is very soluble in water, freely soluble in ethanol (96%). Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, povidone, sodium lauryl sulfate and titanium dioxide. Each tablet is imprinted with black pharmaceutical ink which contains: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, N-butyl alcohol, propylene glycol and shellac. Description

Clindamycin hydrochloride is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules, USP contain clindamycin hydrochloride equivalent to 300 mg of clindamycin. Inactive ingredients:Corn starch, lactose monohydrate and magnesium stearate. Capsule Shell and Printing Ink: black iron oxide, D&C Yellow #10 Aluminum Lake, FD&C Blue #1, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, propylene glycol, shellac, and titanium dioxide. The structural formula is represented below: Molecular Formula: C 18 H 33 ClN 2 O 5 S·HCl Molecular Weight: 461.44 The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside monohydrochloride. Structure

Clindamycin phosphate gel USP, 1%, a topical antibiotic, contains clindamycin phosphate, USP, at a concentration equivalent to 10 mg clindamycin per gram in a gel vehicle consisting of propylene glycol, polyethylene glycol 400, methylparaben, carbomer homopolymer type A, sodium hydroxide and purified water. Chemically, clindamycin phosphate, USP is a water-soluble ester of the semi-synthetic antibiotic produced by a 7 (S)-chloro-substitution of the 7 (R)-hydroxyl group of the parent antibiotic, lincomycin, and has the structural formula represented below: The chemical name for clindamycin phosphate, USP is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans -4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo -α-D- galacto -octopyranoside 2-(dihydrogen phosphate). Structural Formula

Table 4. Description Established Name: Clobazam Tablets Dosage Form: Tablet Route of Administration: Oral Established Pharmacologic Class of Drug: Benzodiazepine Chemical Name: 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4( 3H,5H )-dione Structural Formula: Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylene chloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16 H 13 O 2 N 2 Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, silicon dioxide, and talc. 4

Table 4: Description Established Name: Clobazam Oral Suspension Dosage Forms: Oral Suspension Route of Administration: Oral Established Pharmacologic Class of Drug: Benzodiazepine Chemical Name: 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4( 3H,5H )-dione Structural Formula: Clobazam, USP is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylene chloride. The melting range of clobazam, USP is from 182°C to 185°C. The molecular formula is C 16 H 13 O 2 N 2 Cl and the molecular weight is 300.7. Clobazam oral suspension is available for oral administration as an off-white suspension containing clobazam, USP at a concentration of 2.5 mg/mL. Inactive ingredients include berry flavor, citric acid monohydrate, dibasic sodium phosphate dihydrate, magnesium aluminum silicate, maltitol solution, methylparaben, polysorbate 80, propylene glycol, propylparaben, purified water, simethicone emulsion, sucralose, xanthan gum. formula

Clobetasol propionate shampoo, 0.05%, contains clobetasol propionate USP, a synthetic fluorinated corticosteroid, for topical use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. The chemical name of clobetasol propionate, USP is 21-chloro-9-fluoro-11ß,17-dihydroxy-16ß-methylpregna-1, 4-diene-3, 20-dione 17-propionate. It has the following structural formula: Clobetasol propionate, USP has a molecular weight of 466.97 (CAS Registry Number 25122-46-7). The molecular formula is C 25 H 32 CIFO 5 . Clobetasol propionate, USP is a white to practically white crystalline, odorless powder insoluble in water. Each gram of clobetasol propionate shampoo, 0.05%, contains 0.5 mg of clobetasol propionate, USP in a translucent, colorless to pale yellow viscous liquid shampoo base consisting of alcohol 12.08% v/v, citric acid, coco-betaine, polyquaternium-10, purified water, sodium citrate, and sodium laureth sulfate. Structrual Formula

Clobetasol propionate cream, USP 0.05% contains the active compound clobetasol propionate, USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate, USP, is pregna-1, 4-diene-3, 20-dione, 21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-, (11ß,16ß) and it has the following structural formula: Clobetasol propionate, USP has the empirical formula C 25 H 32 CIFO 5 and a molecular weight of 466.97. It is a white to almost white crystalline powder insoluble in water. Clobetasol propionate cream, USP, contains clobetasol propionate 0.5 mg/g in a cream base of anhydrous citric acid, cetyl alcohol, glycol stearate, lanolin oil, methylparaben, PEG-8 stearate, polysorbate 60, propylene glycol, propylparaben, purified water, sodium citrate, stearyl alcohol, and white petrolatum. Sodium hydroxide pellets may be used to adjust pH. Structural Formula

Cyclosporine ophthalmic emulsion 0.05% contains a topical calcineurin inhibitor immunosuppressant with anti-inflammatory effects. Cyclosporine’s, USP chemical name is Cyclo[[( E )-(2 S ,3 R ,4 R )-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N -methylglycyl- N -methyl-L-leucyl-L-valyl- N -methyl-L-leucyl-L-alanyl-D-alanyl- N -methyl-L-leucyl- N -methyl-L-leucyl- N -methyl-L-valyl] and it has the following structure: Structural Formula Formula: C 62 H 111 N 11 O 12 Mol. Wt.: 1202.6 Cyclosporine, USP is a white to almost white powder. Cyclosporine ophthalmic emulsion appears as a white opaque to slightly translucent homogeneous emulsion. It has an osmolality of 230 to 320 mOsmol/kg and a pH of 6.5 to 8.0. Each mL of cyclosporine ophthalmic emulsion contains: Active: cyclosporine, USP 0.05%. Inactives: glycerin; castor oil; polysorbate 80; carbomer copolymer type A; water for injection; and sodium hydroxide to adjust pH. fgh

Dapsone gel, 7.5%, contains dapsone USP, a sulfone, in an aqueous gel base for topical dermatologic use. Dapsone gel, 7.5% is an off-white to yellow gel with suspended particles. Chemically, dapsone, USP has an empirical formula of C 12 H 12 N 2 O 2 S. It is a white or slightly yellow-white, crystalline powder that has a molecular weight of 248.30. Dapsone, USP chemical name is 4-[(4-aminobenzene) sulfonyl] aniline and its structural formula is: Each gram of dapsone gel, 7.5%, contains 75 mg of dapsone, USP, in a gel of diethylene glycol monoethyl ether, methylparaben, acrylamide/sodium acryloyldimethyl taurate copolymer, isohexadecane, polysorbate 80, and purified water. structure

Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. It has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester. Its molecular formula is C 27 H 37 N 3 O 7 S and its molecular weight is 547.66 g/mol. Darunavir has the following structural formula: Darunavir is a white to creamish solid. It is freely soluble in ethyl acetate and in dichloromethane; practically insoluble in water. Each darunavir tablet contains 600 mg or 800 mg of darunavir. It also contains the inactive ingredients: colloidal silicon dioxide, crospovidone Type A, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A. The 600 mg tablet film-coating, OPADRY-II Orange, contains FD&C Yellow No. 6, polyethylene glycol 3350, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. The 800 mg tablet film-coating, OPADRY-II Brown, contains ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. 1

Deferasirox is an iron-chelating agent provided as a tablet for oral use. Deferasirox is designated chemically as 4-[3,5-bis(2-hydroxyphenyl)-1 H -1,2,4-triazol-1-yl]benzoic acid and has the following structural formula: Deferasirox is a white to slightly yellow powder. It is sparingly soluble in N, N-dimethyl formamide and dimethyl sulfoxide, slightly soluble in methanol and acetone, very slightly soluble in ethanol and practically insoluble in water. It has a molecular formula C 21 H 15 N 3 O 4 and molecular weight of 373.36 g/mol. Deferasirox tablets contain 90 mg, 180 mg, or 360 mg deferasirox. Inactive ingredients include colloidal silicon dioxide, crospovidone type A, magnesium stearate, microcrystalline cellulose, polaxamer 188 and povidone. The 90 mg, 180 mg, and 360 mg strength tablets are coated with Opadry Blue, which contains FD&C BLUE #2, hypromellose, polyethylene glycol, talc and titanium dioxide. 10

The active ingredient in deflazacort tablet is deflazacort (a corticosteroid). Corticosteroids are adrenocortical steroids, both naturally occurring and synthetic. The molecular formula for deflazacort is C 25 H 31 NO 6 . The chemical name for deflazacort is (11β,16β)-21-(acetyloxy)-11-hydroxy-2’-methyl-5’H-pregna-1,4-dieno[17,16-d]oxazole-3,20-dione and the structure is: Deflazacort is a white to off-white crystalline powder and has a molecular weight of 441.52 g/mol. Deflazacort is freely soluble in methylene chloride and in chloroform, soluble in methanol and in acetone, practically insoluble in water and in light petroleum (petroleum ether). Deflazacort tablets for oral administration is available as an immediate-release tablet in strengths of 6 mg, 18 mg, 30 mg and 36 mg. Each tablet contains deflazacort and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, pre-gelatinized corn starch. 1

Desipramine hydrochloride is an antidepressant drug of the tricyclic type, and is chemically: 5 H -Dibenz[ b ƒ]azepine-5-propanamine,10,11-dihydro- N -methyl-, monohydrochloride. Each desipramine hydrochloride tablet, USP contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg of desipramine hydrochloride, USP for oral administration. Inactive Ingredients Desipramine hydrochloride tablets, USP contain the following inactive ingredients: corn starch, D&C Red #27 aluminum lake (in 75 mg), FD&C Blue #1 aluminum lake (in 10 mg and 50 mg), FD&C Blue #2 aluminum lake (in 10 mg), FD&C Red #40 aluminum lake (in 75 mg), FD&C Yellow #6 aluminum lake (in 50 mg, 75 mg and 100 mg), hydroxypropyl cellulose, hypromellose, iron oxide red (in 100 mg), iron oxide yellow (in 25 mg and 50 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. Meets USP Dissolution Test 2. structure formula

Dexamethasone Tablets, USP, for oral administration, are supplied in two potencies, 4 mg and 6 mg containing 4 mg and 6 mg of dexamethasone, USP respectively. Inactive ingredients are corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch and sodium starch glycolate type A. The molecular weight for dexamethasone is 392.46 g/mol. It is designated chemically as (11β,16α)-9-fluoro-11,17,21-trihydroxy-16-methylpregna-1,4-diene-3,20-dione. The molecular formula is C 22 H 29 FO 5 and the structural formula is: Dexamethasone, USP, a synthetic adrenocortical steroid, is a white to practically white crystalline powder. It is stable in air. It is practically insoluble in water. Meets USP Dissolution Test 2. struc

Dexamethasone Tablets, USP are available for oral administration containing 2 mg of dexamethasone, USP. Each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch and sodium starch glycolate type A. Dexamethasone, USP, a synthetic adrenocortical steroid, is a white or practically white crystalline powder. It is stable in air. It is sparingly soluble in acetone, ethanol, dioxane and methanol, slightly soluble in chloroform, practically insoluble in water. The molecular formula is C 22 H 29 FO 5 . The molecular weight is 392.5 g/mol. It is designated chemically as (11β,16α)-9-fluoro-11,17,21-trihydroxy-16-methylpregna-1,4-diene-3,20-dione and the structural formula is: Meets USP Dissolution Test 2. chem struc