alvogen, inc. - Medication Listings

Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15 H 10 I 4 NNaO 4 •H 2 O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown: Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength: Table 9. Levothyroxine Sodium Tablets Color Additives Strength (mcg) Color additive(s) 25 FD&C Yellow No. 6 Aluminum Lake Note – FD&C Yellow No. 6 is orange in color. 50 None 75 FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake 88 FD&C Blue No. 1 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, D&C Yellow No. 10 Aluminum Lake 100 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake* 112 D&C Red No. 27 & 30 Aluminum Lake 125 FD&C Yellow No. 6 Aluminum Lake*, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake 137 FD&C Blue No. 1 Aluminum Lake 150 FD&C Blue No. 2 Aluminum Lake 175 FD&C Blue No. 1 Aluminum Lake, D&C Red No. 27 & 30 Aluminum Lake 200 FD&C Red No. 40 Aluminum Lake 300 D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake*, FD&C Blue No. 1 Aluminum Lake

Sertraline hydrochloride capsules contain sertraline hydrochloride, a selective serotonin reuptake inhibitor (SSRI). Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3,4-dichlorophenyl)-N-methyl-tetralin-1-amine hydrochloride. The empirical formula C 17 H 17 Cl 2 N • HCl is represented by the following structural formula: Sertraline hydrochloride is a white to almost white crystalline powder that is slightly soluble in water, acetone and isopropyl alcohol. Sertraline hydrochloride capsules are for oral administration and contain 168 mg and 224 mg sertraline hydrochloride, USP equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: croscarmellose sodium, gelatin, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, silicon dioxide and titanium dioxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives. Chemical Structure

Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5 mcg/hour, 7.5 mcg/hour, 10 mcg/hour, 15 mcg/hour, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine Transdermal System 5 6.25 5 Buprenorphine Transdermal System 7.5 9.375 7.5 Buprenorphine Transdermal System 10 12.5 10 Buprenorphine Transdermal System 15 18.75 15 Buprenorphine Transdermal System 20 25 20 Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: cross-linked polyacrylate, levulinic acid, oleyl oleate, and kollidon 90F.

BONSITY (teriparatide injection) is a recombinant human parathyroid hormone analog (PTH 1-34). It has an identical sequence to the 34 N-terminal amino acids (the biologically active region) of the 84-amino acid human parathyroid hormone. The molecular formula of teriparatide is C 181 H 291 N 55 O 51 S 2 and the molecular weight is 4117.8 daltons. Its amino acid sequence is shown below: Teriparatide is manufactured using a strain of Pseudomonas fluorescens modified by recombinant DNA technology. BONSITY is supplied as a sterile, colorless, clear, isotonic solution in a glass cartridge which is pre-assembled into a single-patient-use delivery device (pen) for subcutaneous injection. Each pen is filled with volume to allow delivery of 2.24 mL. Each mL contains 250 mcg teriparatide (as a free base), 0.41 mg glacial acetic acid, 0.10 mg sodium acetate, 45.4 mg mannitol, 3 mg metacresol, and water for injection. The drug product is a pH 4.0 solution. Each cartridge, pre-assembled into a delivery device, delivers 20 mcg of teriparatide per dose each day for up to 28 days. Each device contains additional volume to allow troubleshooting of the device 2 times. Chemical Structure

Buprenorphine and naloxone sublingual film is an orange film, imprinted with white ink identifying the product and strength. It contains buprenorphine hydrochloride, a mu-opioid receptor partial agonist and a kappa-opioid receptor antagonist, and naloxone hydrochloride dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone, and 12 mg buprenorphine with 3 mg naloxone. Each sublingual film also contains polyethylene oxide, maltitol, citric acid monohydrate, sodium citrate dihydrate, acesulfame potassium, FD&C yellow #6, lime flavor and white ink. The white ink contains ethyl alcohol, propylene glycol, isopropyl alcohol, n-butyl alcohol, potassium hydroxide, ammonium hydroxide, and titanium dioxide. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α- morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dihydrate is 17-Allyl-4,5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure: Naloxone hydrochloride dihydrate has the molecular formula C 19 H 21 NO 4 • HCl • 2H 2 O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.

Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-2-(tert-Butylamino)-3'-chloropropiophenone hydrochloride. The molecular weight is 276.2. The empirical formula is C 13 H 18 ClNO·HCl. Bupropion hydrochloride powder is white or almost white, crystalline, and soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is: Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration of 450 mg of bupropion hydrochloride, USP as white to off-white extended-release tablets. Each film-coated tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: carboxymethyl cellulose sodium, colloidal silicon dioxide, hydrochloric acid, hydroxypropyl cellulose, hypromellose, magnesium stearate, methacrylic acid copolymer, polyethylene glycol 8000, polyethylene oxide, polyvinyl pyrrolidone and polyvinyl acetate blend, stearic acid, talc, titanium dioxide and triacetin. “BUP450” is printed on one side of the tablet with edible black ink. Structural Formula

Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as Benzenepropanoic acid, α-hydrazino-3,4-dihydroxy-α-methyl-, monohydrate, ( S-; (–)-L-α –hydrazino-3,4- dihydroxy-α-methylhydrocinnamic acid monohydrate. Its empirical formula is C 10 H 14 N 2 O 4 •H 2 O, and its structural formula is: Carbidopa Tablets contain 25 mg of carbidopa. Inactive ingredients are corn starch, FD&C Yellow #6 Aluminum Lake, microcrystalline cellulose, and magnesium stearate. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.23.

Dexamethasone Tablets 0.5 mg, 0.75 mg, 4 mg and 6 mg are for oral administration. Each tablet contains 0.5 mg, 0.75 mg, 4 mg or 6 mg of dexamethasone. Dexamethasone, a synthetic adrenocortical steroid, is a white to practically white, odorless, crystalline powder. It is stable in air. It is practically insoluble in water. It is designated chemically as 9-fluoro-11β, 17, 21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. The structural formula is represented below: C 22 H 29 FO 5 MW 392.47 Each tablet contains anhydrous lactose, croscarmellose sodium, magnesium stearate, microcrystalline cellulose and stearic acid. In addition, the 0.5 mg tablet contains D&C Yellow #10. The 0.75 mg tablet contains D&C Yellow #10 and FD&C Blue #1. Structural Formula

A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate. EACH TABLET CONTAINS 5 mg 7.5 mg 10 mg 12.5 mg 15 mg 20 mg 30 mg Dextroamphetamine Saccharate 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Aspartate Monohydrate Equivalent 1.25 mg a 1.875 mg b 2.5 mg c 3.125 mg d 3.75 mg e 5 mg f 7.5 mg g Dextroamphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Amphetamine Sulfate, USP 1.25 mg 1.875 mg 2.5 mg 3.125 mg 3.75 mg 5 mg 7.5 mg Total Amphetamine Base Equivalence 3.13 mg 4.7 mg 6.3 mg 7.8 mg 9.4 mg 12.6 mg 18.8 mg a 1.25 mg of Amphetamine Aspartate Monohydrate equivalent to 1.17 mg Amphetamine Aspartate (Anhydrous) as supplied b 1.875 mg of Amphetamine Aspartate Monohydrate equivalent to 1.755 mg Amphetamine Aspartate (Anhydrous) as supplied c 2.5 mg of Amphetamine Aspartate Monohydrate equivalent to 2.34 mg Amphetamine Aspartate (Anhydrous) as supplied d 3.125 mg of Amphetamine Aspartate Monohydrate equivalent to 2.925 mg Amphetamine Aspartate (Anhydrous) as supplied e 3.75 mg of Amphetamine Aspartate Monohydrate equivalent to 3.51 mg Amphetamine Aspartate (Anhydrous) as supplied f 5 mg of Amphetamine Aspartate Monohydrate equivalent to 4.6 mg Amphetamine Aspartate (Anhydrous) as supplied g 7.5 mg of Amphetamine Aspartate Monohydrate equivalent to 7.03 mg Amphetamine Aspartate (Anhydrous) as supplied Inactive Ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate. Colors: Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets, 5 mg is a white tablet, which contains no color additives. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets, 7.5 mg and 10 mg contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets, 12.5 mg, 15 mg, 20 mg and 30 mg contain FD&C Yellow #6 Aluminum Lake as a color additive.

Disulfiram is an alcohol antagonist drug. CHEMICAL NAME: bis(diethylthiocarbamoyl) disulfide. STRUCTURAL FORMULA: Disulfiram occurs as a white to off-white, odorless, and almost tasteless powder, soluble in water to the extent of about 20 mg in 100 mL, and in alcohol to the extent of about 3.8 g in 100 mL. Each tablet for oral administration contains 250 mg disulfiram, USP. Tablets also contain colloidal silicon dioxide, anhydrous lactose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and stearic acid.

Each gram of estradiol vaginal cream, USP, 0.01% contains 0.1 mg estradiol (as estradiol hemihydrate) in a nonliquefying base containing propylene glycol, methylparaben, sodium lauryl sulfate, mono- and di-glycerides, stearyl alcohol, ceresin wax, tert-butylhydroquinone, disodium EDTA, hypromellose, and purified water. Estradiol hemihydrate is chemically described as estra-1,3,5(10)-triene-3,17β-diol hemihydrate. It has an empirical formula of C 18 H 24 O 2 . ½H 2 O and molecular weight of 272.37. The structural formula is: structure

Hydrocodone bitartrate extended-release tablets are supplied in 20 mg, 30 mg, 40 mg, 60 mg, 80 mg, 100 mg and 120 mg film-coated tablets for oral administration. The tablet strengths describe the amount of hydrocodone per tablet as the bitartrate salt. Hydrocodone bitartrate is an opioid agonist. Its chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). Its structural formula is: Empirical formula: C 18 H 21 NO 3 • C 4 H 6 O 6 • 2½H 2 O; Molecular weight: 494.49. Hydrocodone bitartrate exists as fine white crystals or a crystalline powder. It is affected by light. It is soluble in water, slightly soluble in alcohol, and insoluble in ether and chloroform. The 20 mg, 30 mg, 40 mg, 60 mg, 80 mg, 100 mg and 120 mg tablets contain the following inactive ingredients: hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol (PEG), polyethylene oxide, polysorbate 80, polyvinyl alcohol, talc, and titanium dioxide. The 30 mg tablets also contain iron oxide red and iron oxide yellow. The 40 mg tablets also contain iron oxide red. The 60 mg tablets also contain FD&C Blue #2. The 80 mg tablets also contain D&C Red #27 and FD&C Blue #1. The 100 mg tablets also contain FD&C Blue #2 and iron oxide yellow. The 120 mg tablets also contain iron oxide yellow. The tablet imprinting ink contains ammonium hydroxide, butyl alcohol, iron oxide black, isopropyl alcohol, propylene glycol, and shellac.

Hydrocodone bitartrate extended-release capsules are hard gelatin capsules for oral administration. Hydrocodone bitartrate is an opioid agonist and occurs as fine, white crystals, or as a crystalline powder. The chemical name is 4,5(alpha)-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5) or morphinan-6-one, 4,5-epoxy-3-methoxy-17-methyl-, (5 alpha)-, [R (R*, R*)]-2,3-dihydroxybutanedioate (1:1), hydrate (2:5). It has the following structural formula: Each hydrocodone bitartrate extended-release capsule contains either 10 mg, 15 mg, 20 mg, 30 mg, 40 mg, or 50 mg of hydrocodone bitartrate USP. All capsule strengths include the following inactive ingredients: ammonio methacrylate copolymer Type B, copovidone, gelatin, silicon dioxide, sodium lauryl sulfate, sugar spheres, and talc. The capsule shells contain the following colorants: black iron oxide (50 mg capsule), D&C yellow #10 (all capsule strengths), FD&C blue #1 (10 mg, 15 mg, and 30 mg capsules), FD&C red #3 (15 mg and 30 mg capsules), FD&C red #40 (30 mg capsule), FD&C yellow #6 (all capsule strengths) and titanium dioxide (all capsule strengths). The imprinting ink for all capsule strengths contains: black iron oxide, D&C yellow #10, FD&C blue #1, FD&C blue #2, FD&C red # 40, n-butyl alcohol, propylene glycol and shellac.

Lenalidomide capsules, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2 H -isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure: 3-(4-amino-1-oxo 1,3-dihydro-2 H -isoindol-2-yl) piperidine-2,6-dione The empirical formula for lenalidomide is C 13 H 13 N 3 O 3 , and the gram molecular weight is 259.3. Lenalidomide is an off-white to pale-yellow solid powder. It is soluble in organic solvent/water mixtures, and buffered aqueous solvents. Lenalidomide is more soluble in organic solvents and low pH solutions. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, lactose anhydrous, magnesium stearate and microcrystalline cellulose. The 2.5 mg capsule shell contains gelatin, red iron oxide, yellow iron oxide, titanium dioxide, FD&C blue #1, FD&C red #3, FD&C red #40 and black ink. The 5 mg capsule shell contains gelatin, titanium dioxide, black iron oxide, red iron oxide, yellow iron oxide, FD&C blue #1, FD&C yellow #6 and black ink. The 10 mg capsule shell contains gelatin, titanium dioxide, FD&C blue #1, FD&C red #40, FD&C yellow #6, FD&C yellow #5 and black ink. The 15 mg capsule shell contains gelatin, titanium dioxide, FD&C blue #1, FD&C red #40, FD&C yellow #5, black iron oxide, red iron oxide, yellow iron oxide and black ink. The 20 mg capsule shell contains gelatin, titanium dioxide, FD&C blue #1, FD&C red #40, red iron oxide, yellow iron oxide and black ink. The 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The black imprinting ink contains shellac, strong ammonia solution, black iron oxide. structure

Lisdexamfetamine dimesylate capsules, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino- N -[(1 S )-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C 15 H 25 N 3 O∙(CH 4 O 3 S) 2 , which corresponds to a molecular weight of 455.60. The chemical structure is: Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for Lisdexamfetamine Dimesylate Capsules: Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine). Inactive ingredients: black iron oxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, propylene glycol, shellac, and titanium dioxide. The capsule shells contain gelatin, titanium dioxide, FD&C Blue #1 (40 mg, 50 mg, 60 mg and 70 mg), FD&C Red #3 (10 mg, 30 mg, 60 mg, and 70 mg), FD&C Red #40 (40 mg), and D&C Yellow #10 (30 mg and 70 mg). structure

Methenamine Hippurate Tablets are a urinary tract antiseptic drug. Each white, scored tablet contains methenamine hippurate 1g (see HOW SUPPLIED). Methenamine Hippurate Tablets also contain: magnesium stearate, povidone and saccharin sodium. Chemically, methenamine hippurate is the hippuric acid salt of methenamine (hexamethylenetetramine). Structural formula: C 15 H 21 N 5 O 3 Molecular Weight 319.37 Methenamine structural formula

Naproxen Sodium Controlled-Release Tablets is a nonsteroidal anti-inflammatory drug, available as controlled-release tablets in 375 mg, 500 mg, and 750 mg strengths for oral administration. The chemical name is 2-naphthaleneacetic acid, 6-methoxy-α-methyl-sodium salt, (S)-. The molecular weight is 252.24. Its molecular formula is C 14 H 13 NaO 3 , and it has the following chemical structure. Naproxen sodium is an odorless crystalline powder, white to creamy in color. It is soluble in methanol and water. Naproxen Sodium Controlled-Release Tablets contain 412.5 mg, 550 mg, or 825 mg of naproxen sodium, equivalent to 375 mg, 500 mg, and 750 mg of naproxen, and 37.5 mg, 50 mg, and 75 mg sodium respectively. Each Naproxen Sodium Controlled-Release Tablet also contains the following inactive ingredients: ammoniomethacrylate copolymer Type A, ammoniomethacrylate copolymer Type B, citric acid, crospovidone, magnesium stearate, methacrylic acid copolymer Type A, microcrystalline cellulose, povidone, and talc. The tablet coating contains hydroxypropyl methylcellulose, polyethylene glycol, and titanium dioxide.

Nitrofurantoin (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione Inactive Ingredients: Each capsule contains edible black ink, gelatin, lactose, starch, talc, titanium dioxide, and may contain FD&C Yellow No. 6 and D&C Yellow No. 10.

Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Nitrofurantoin capsules, USP (monohydrate/macrocrystals) is a hard gelatin capsule. Each capsule contains 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals and 75 mg of nitrofurantoin monohydrate. The chemical name of nitrofurantoin macrocrystals is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4-imidazolidinedione. The chemical structure is the following: Molecular Weight: 238.16 The chemical name of nitrofurantoin monohydrate is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4- imidazolidinedione monohydrate. The chemical structure is the following: Molecular Weight: 256.17 Inactive Ingredients: Each capsule contains carbomer 934P, corn starch, compressible sugar, D&C Yellow No. 10, edible gray ink, FD&C Blue No. 1, FD&C Red No. 40, gelatin, lactose, magnesium stearate, povidone, talc, and titanium dioxide. Meets USP Dissolution Test 8.

Oseltamivir phosphate, USP, an influenza neuraminidase inhibitor (NAI), is available as capsules containing 30 mg, 45 mg, or 75 mg oseltamivir for oral use. In addition to the active ingredient, each capsule contains croscarmellose sodium, povidone K-30, pregelatinized starch, sodium stearyl fumarate and talc. The 30 mg shell (yellow / yellow) contains gelatin, iron oxide red, iron oxide yellow, purified water and titanium dioxide. The 45 mg shell (grey / grey) contains gelatin, iron oxide black, purified water and titanium dioxide. The 75 mg shell (yellow / grey) contains gelatin, iron oxide black (in body), iron oxide red, iron oxide yellow (in cap), purified water and titanium dioxide. Each capsule is printed with blue ink, which includes butyl alcohol, dehydrated alcohol, FD&C Blue No. 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonium solution. Oseltamivir phosphate, USP is a white to off white powder with the chemical name (3R,4R,5S)-4-acetylamino-5-amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C 16 H 28 N 2 O 4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows:

Oseltamivir phosphate, USP, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains colloidal silicon dioxide, monosodium citrate, saccharin sodium, sodium benzoate, sorbitol, titanium dioxide, tutti-frutti flavoring and xanthan gum. Oseltamivir phosphate, USP is a white to off-white powder with the chemical name (3R,4R,5S)-4-acetylamino-5-amino­3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C 16 H 28 N 2 O 4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows:

Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains: Oxycodone Hydrochloride, USP.................................... 5 mg* (*5 mg oxycodone hydrochloride is equivalent to 4.4815 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 7.5 mg* (*7.5 mg oxycodone hydrochloride is equivalent to 6.7228 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Oxycodone Hydrochloride, USP.................................... 10 mg* (*10 mg oxycodone hydrochloride is equivalent to 8.9637 mg of oxycodone.) Acetaminophen, USP.................................................... 325 mg Inactive Ingredients All strengths of Oxycodone and Acetaminophen Tablets, USP contain the inactive ingredients crospovidone, lactose monohydrate, povidone, pregelatinized corn starch, and stearic acid. The 5 mg/325 mg tablets contain FD&C Blue No. 1 Aluminum Lake as a colorant. The 7.5 mg/325 mg tablets contain FD&C Yellow No. 6 Aluminum Lake as a colorant. The 10 mg/325 mg tablets contain D&C Yellow No. 10 Aluminum Lake as a colorant. Oxycodone and acetaminophen tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18 H 21 NO 4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula: Oxycodone and acetaminophen tablets contain acetaminophen, 4'-hydroxyacetanilide, a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8 H 9 NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula:

Oxycodone hydrochloride tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 15 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula: Oxycodone hydrochloride tablets contain the following inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized corn starch, stearic acid, D&C Yellow No. 10 (15 mg tablet) and FD&C Blue No. 2 (15 mg and 30 mg tablet). The 5 mg, 15 mg and 30 mg tablets contain the equivalent of 4.5 mg, 13.5 mg and 27.0 mg, respectively, of oxycodone free base.

INDICATION Pyridostigmine Bromide Extended-release Tablets is useful in the treatment of myasthenia gravis.

Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine,2,3-dihydro-N-2-propynyl-,(1R)-, methanesulfonate. The molecular formula of rasagiline mesylate is C 12 H 13 N•CH 4 SO 3 and its molecular weight is 267.34. Its structural formula is: Rasagiline mesylate is a white to off-white powder, freely soluble in water or ethanol and sparingly soluble in isopropanol. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: lactose monohydrate, pregelatinized starch, corn starch, talc, stearic acid, and citric acid monohydrate. structure

Teriparatide injection is a recombinant human parathyroid hormone analog (PTH 1-34). It has an identical sequence to the 34 N‑terminal amino acids (the biologically active region) of the 84-amino acid human parathyroid hormone. The molecular formula of teriparatide is C 181 H 291 N 55 O 51 S 2 and the molecular weight is 4117.8 daltons. Its amino acid sequence is shown below: Teriparatide is manufactured using a strain of Pseudomonas fluorescens modified by recombinant DNA technology. Teriparatide injection is supplied as a sterile, colorless, clear, isotonic solution in a glass cartridge which is pre-assembled into a single-patient-use delivery device (pen) for subcutaneous injection. Each pen is filled with volume to allow delivery of 2.24 mL. Each mL contains 250 mcg teriparatide (as a free base), 0.41 mg glacial acetic acid, 0.10 mg sodium acetate, 45.4 mg mannitol, 3 mg metacresol, and water for injection. The drug product is a pH 4.0 solution. Each cartridge, pre-assembled into a delivery device, delivers 20 mcg of teriparatide per dose each day for up to 28 days. Each device contains additional volume to allow troubleshooting of the device 2 times. amino-acid-sequence

Testosterone Cypionate Injection, USP, for intramuscular injection, contains testosterone cypionate which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone cypionate is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for testosterone cypionate is androst-4-en-3-one,17-(3-cyclopentyl-1-oxopropoxy)-, (17β)-. Its molecular formula is C 27 H 40 O 3 , and the molecular weight 412.61. The structural formula is represented below: Testosterone Cypionate Injection, USP is available as 200 mg/mL testosterone cypionate. Each mL of the solution contains Testosterone Cypionate, 200 mg; Benzyl Benzoate, 0.2 mL; Cottonseed Oil, 560 mg; Benzyl Alcohol (as preservative), 9.45 mg.