almatica pharma llc - Medication Listings

GRALISE contains gabapentin, a gamma-aminobutyric acid (GABA) analogue, as the active pharmaceutical ingredient. Gabapentin's chemical name is 1-(aminomethyl)cyclohexaneacetic acid; with a molecular formula of C 9 H 17 NO 2 and a molecular weight of 171.24 g/mol. Gabapentin chemical structural formula is: Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and acidic and basic solutions. The log of the partition coefficient (n-octanol/ 0.05M phosphate buffer) at pH 7.4 is -1.25. GRALISE is intended for oral administration and is supplied as tablets containing 300 mg, 450 mg, 600 mg, 750 mg, or 900 mg of gabapentin USP. Each 300 mg tablet contains the inactive ingredients Copovidone NF, Hypromellose USP, Magnesium Stearate NF, Microcrystalline Cellulose NF, Polyethylene Oxide NF, and white film coating (Polyvinyl Alcohol USP, Talc USP, Titanium Oxide USP, Polyethylene Glycol 3350 USP, and Lecithin NF (soya)). Each 450 mg tablet contains the inactive ingredients Copovidone NF, Hypromellose USP, Magnesium Stearate NF, Polyethylene Oxide NF, and red film coating (Polyethylene glycol 3350 USP, Polyvinyl Alcohol USP, Talc USP, Titanium Oxide USP, and Iron Oxide Red NF). Each 600 mg tablet contains the inactive ingredients Copovidone NF, Hypromellose USP, Magnesium Stearate NF, Polyethylene Oxide NF, and beige film coating (Polyethylene Glycol 3350 USP, Polyvinyl Alcohol USP, Talc USP, Titanium Oxide USP, Iron Oxide Yellow NF, and Iron Oxide Red NF). Each 750 mg tablet contains the inactive ingredients Copovidone NF, Hypromellose USP, Magnesium Stearate NF, Polyethylene Oxide NF, and yellow film coating (Polyethylene Glycol 3350 USP, Polyvinyl Alcohol USP, Talc USP, Titanium oxide USP, and Iron Oxide Yellow NF). Each 900 mg tablet contains the inactive ingredients Copovidone NF, Hypromellose USP, Magnesium Stearate NF, Polyethylene Oxide NF, and pink film coating (Polyethylene Glycol 3350 USP, Polyvinyl Alcohol USP, Talc USP, Titanium oxide USP, and Iron Oxide Red NF). structure

Sertraline HCl Capsules contain sertraline HCl, a selective serotonin reuptake inhibitor (SSRI). Sertraline HCl has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3,4-dichlorophenyl)-N-methyl-tetralin-1-amine hydrochloride. The empirical formula C 17 H 17 Cl 2 N • HCl is represented by the following structural formula: Sertraline HCl is a white to almost white crystalline powder that is slightly soluble in water, acetone and isopropyl alcohol. Sertraline HCl Capsules is for oral administration and contain 168 mg and 224 mg sertraline HCl, equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: croscarmellose sodium, gelatin, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, silicon dioxide and titanium dioxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives. Chemical Structure

Citalopram Capsules contain citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5carbonitrile, hydrobromide with the following structural formula: The molecular formula is C 20 H 22 BrFN 2 O and its molecular weight is 405.35. Citalopram hydrobromide is a white to almost white crystalline powder. Citalopram hydrobromide is freely soluble in chloroform and sparingly soluble in ethanol and water. Citalopram Capsules is for oral administration and contains 30 mg of citalopram, equivalent to 37.5 mg of citalopram hydrobromide. The strengths reflect citalopram base equivalent content. Citalopram Capsules also contain the inactive ingredients copovidone, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. The capsule shells contain the colorants FD&C Blue #1 and FD&C Red #3.

Escitalopram Capsules contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3(dimethyl-amino)propyl]-1-( p -fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula: The molecular formula is C 20 H 21 FN 2 O • C 2 H 2 O 4 and the molecular weight is 414.43. Escitalopram oxalate occurs as a fine, white to slightly yellow powder and is freely soluble in methanol and in dimethyl sulphoxide, sparingly soluble in water and in alcohol, very slightly soluble in ethyl acetate and in isopropyl alcohol, and insoluble in heptane. Escitalopram Capsules are intended for oral administration and are available only in a 15 mg strength. The capsules contain 15 mg escitalopram (equivalent to 19.16 mg escitalopram oxalate) and the following inactive ingredients: croscarmellose sodium, copovidone, FD&C Blue #1, FD&C Red #40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, talc, and titanium dioxide.

LOREEV XR contains lorazepam, a benzodiazepine. Lorazepam is a nearly white crystalline powder and is practically insoluble in water and slightly soluble in alcohol. It is a 1:1 mixture of (R) and (S) isomers. The chemical name is ±-7-chloro-5-( o -chlorophenyl)-1,3-dihydro-3-hydroxy-2 H -1,4-benzodiazepin-2-one and its structural formula is: Molecular formula: C 15 H 10 Cl 2 N 2 O 2 ; Molecular weight: 321.16 LOREEV XR is intended for oral administration. Each capsule contains 1 mg, 1.5 mg, 2 mg, or 3 mg of lorazepam. The inactive ingredients are colloidal silicon dioxide, corn starch, gelatin, glyceryl monostearate, hypromellose, lactose monohydrate, methyl acrylate methyl methacrylate and methacrylic acid (7:3:1) copolymer 280000 dispersion, microcrystalline cellulose, polysorbate 80, talc, titanium dioxide, and triethyl citrate. Additionally, the capsule shells contain the following colorants: 1 mg capsules: FD&C Yellow No. 5 1.5 mg capsules: FD&C Blue No. 1 and FD&C Red No. 3 2 mg capsules: D&C Yellow No. 10 and FD&C Red No. 3 3 mg capsules: D&C Yellow No. 10, FD&C Blue No. 1, FD&C Yellow No. 6

Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Macrobid ® (Nitrofurantoin Capsules, USP) (monohydrate/macrocrystals) is a hard gelatin capsule. Each capsule contains 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals and 75 mg of nitrofurantoin monohydrate. The chemical name of nitrofurantoin macrocrystals is 1-[[[5-nitro-2-furanyl]methylene]amino]-2,4-imidazolidinedione. The chemical structure is the following: Molecular Weight: 238.16 The chemical name of nitrofurantoin monohydrate is 1-[[[5-nitro-2-furanyl]methylene]amino]-2,4- imidazolidinedione monohydrate. The chemical structure is the following: Molecular Weight: 256.17 Inactive Ingredients: Each capsule contains carbomer 934P, corn starch, compressible sugar, D&C Yellow No. 10, edible gray ink, FD&C Blue No. 1, FD&C Red No. 40, gelatin, lactose, magnesium stearate, povidone, talc, and titanium dioxide. Meets USP Dissolution Test 8.

Macrodantin ® (Nitrofurantoin Capsules, USP) (macrocrystals) is a synthetic chemical of controlled crystal size. It is a stable, yellow, crystalline compound. Macrodantin is an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. Each capsule contains 25 mg, 50 mg, or 100 mg of nitrofurantoin macrocrystals. 1-[[(5-nitro-2-furanyl)methylene]amino]-2, 4-imidazolidinedione Inactive Ingredients: Each capsule contains edible black ink, gelatin, lactose, starch, talc, titanium dioxide, and may contain FD&C Yellow No. 6 and D&C Yellow No. 10.

NAPRELAN (naproxen sodium) Controlled-Release Tablets is a nonsteroidal anti-inflammatory drug, available as controlled-release tablets in 375 mg, 500 mg, and 750 mg strengths for oral administration. The chemical name is 2-naphthaleneacetic acid, 6-methoxy-α-methyl-sodium salt, (S)-. The molecular weight is 252.24. Its molecular formula is C 14 H 13 NaO 3 , and it has the following chemical structure. Naproxen sodium is an odorless crystalline powder, white to creamy in color. It is soluble in methanol and water. NAPRELAN Tablets contain 412.5 mg, 550 mg, or 825 mg of naproxen sodium, equivalent to 375 mg, 500 mg, and 750 mg of naproxen, and 37.5 mg, 50 mg, and 75 mg sodium respectively. Each NAPRELAN Tablet also contains the following inactive ingredients: ammoniomethacrylate copolymer Type A, ammoniomethacrylate copolymer Type B, citric acid, crospovidone, magnesium stearate, methacrylic acid copolymer Type A, microcrystalline cellulose, povidone, and talc. The tablet coating contains hydroxypropyl methylcellulose, polyethylene glycol, and titanium dioxide.

Stalevo is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson's disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C 10 H 14 N 2 O 4 ∙H 2 O, and its structural formula is: Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C 9 H 11 NO 4 , and its structural formula is: Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C 14 H 15 N 3 O 5 and its structural formula is: Stalevo is supplied as tablets in 6 strengths: Stalevo 50:12.5 mg of carbidopa, 50 mg of levodopa and 200 mg of entacapone Stalevo 75: 18.75 mg of carbidopa, 75 mg of levodopa and 200 mg of entacapone Stalevo 100: 25 mg of carbidopa, 100 mg of levodopa and 200 mg of entacapone Stalevo125: 31.25 mg of carbidopa, 125 mg of levodopa and 200 mg of entacapone Stalevo 150: 37.5 mg of carbidopa, 150 mg of levodopa and 200 mg of entacapone Stalevo 200: 50 mg of carbidopa, 200 mg of levodopa and 200 mg of entacapone Inactive Ingredients: corn starch, croscarmellose sodium, glycerol 85%, hypromellose, magnesium stearate, mannitol, polysorbate 80, povidone, sucrose, red iron oxide, and titanium dioxide. Stalevo 50, Stalevo 100, and Stalevo 150 also contain yellow iron oxide. Chemical Structure Chemical Structure Chemical Structure

TENORMIN ® (atenolol), a synthetic, beta 1 -selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2'-hydroxy-3'-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are: Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). TENORMIN is available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate.

Venlafaxine Extended-Release Tablets contains venlafaxine, an SNRI, present as venlafaxine besylate monohydrate salt. Venlafaxine besylate monohydrate is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol benzene sulfonate monohydrate or Cyclohexanol, 1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, benzenesulfonate, monohydrate and has the molecular formula of C 23 H 33 NO 5 S⸱H 2 O. Its molecular weight is 453.59. The structural formula is shown as follows: Venlafaxine besylate is a white to almost white crystalline powder, with a solubility of about 32 mg/ml in water. Its octanol:water partition coefficient is 0.154. Drug release is controlled by a combination of diffusion through the extended-release coating and erosion of the core tablets. The modified drug release is pH independent. Venlafaxine Extended-Release Tablets are intended for oral administration and contains 183.95 mg of venlafaxine besylate monohydrate equivalent to 112.5 mg of venlafaxine. Inactive ingredients: ammonio methacrylate copolymer, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, silicon dioxide, simethicone, talc, titanium dioxide, and triacetin. The tablet printing ink is composed of ammonium hydroxide, black iron oxide, n-butyl alcohol, isopropyl alcohol, propylene glycol, and shellac.

Zolpidem Tartrate Capsules 7.5 mg contains zolpidem tartrate, a gamma-aminobutyric acid (GABA) A receptor positive modulator of the imidazopyridine class. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate. It has the following structure: Zolpidem tartrate is a white to off-white crystalline powder, hygroscopic that is slightly soluble in water, sparingly soluble in methanol alcohol, and practically insoluble in methylene chloride. It has a molecular formula of (C 19 H 21 N 3 O) 2 · C 4 H 6 O 6 and molecular weight of 764.87 g/mol. Zolpidem Tartrate Capsules are intended for oral administration and are available only in a 7.5 mg strength. The capsules contain 7.5 mg zolpidem tartrate, USP (equivalent to 6 mg zolpidem) and include the following inactive ingredients: gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and the colorants FD&C Blue #1, FD&C Red #40 and FD&C Yellow #6. structure