pilocarpine hydrochloride - Generic Medications

Pilocarpine hydrochloride ophthalmic solution, USP is a cholinergic agonist prepared as a sterile topical ophthalmic solution. The active ingredient is represented by the chemical structure: Established Name: pilocarpine hydrochloride, USP Chemical Name: 2(3 H )-furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)-methyl]-monohydrochloride, (3S- cis ). Molecular Formula: C 11 H 16 N 2 O 2 • HCl Molecular Weight: 244.72 Pilocarpine hydrochloride, USP is a white or almost white, crystalline powder or colorless crystals hygroscopic. It is very soluble in water, freely soluble in alcohol, slightly soluble in chloroform and insoluble in ether. Each mL of pilocarpine hydrochloride ophthalmic solution, USP contains: Active: pilocarpine hydrochloride, USP 1% (10 mg/mL), 2% (20 mg/mL), or 4% (40 mg/mL). Preservative: benzalkonium chloride 0.01%. Inactives: 0.5% hypromellose 2910; boric acid; sodium citrate; sodium chloride (present in 1% product only); hydrochloric acid and/or sodium hydroxide (to adjust pH); water for injection. Pilocarpine hydrochloride ophthalmic solution, USP has a pH of 3.5 to 5.5 and an osmolality of 270 to 350 mOsm/kg (1% product), 290 to 350 mOsm/kg (2% product) and 500 to 600 mOsm/kg (4% product). ab

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride is a white or almost white, crystalline powder or colorless crystals, hygroscopic which is very soluble in water and freely soluble in ethanol (96 percent). Pilocarpine hydrochloride, with a chemical name of (3 S - cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg pilocarpine hydrochloride tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride USP. Inactive ingredients in the tablet are: hypromellose, microcrystalline cellulose, polyethylene glycol, stearic acid and titanium dioxide. Each 7.5 mg pilocarpine hydrochloride tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride USP. Inactive ingredients in the tablet are: FD&C blue # 2, hypromellose, microcrystalline cellulose, polyethylene glycol, stearic acid and titanium dioxide. FDA approved dissolution test specifications differ from USP. pilocarpine

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S- cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl]monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc.

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S- cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl]monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc.

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S- cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl]monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Chemical Structure

Pilocarpine Hydrochloride Tablets contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, with a chemical name of (3 S - cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1 -methyl-1 H -imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet's film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide and other ingredients. Each 7.5 mg Pilocarpine Hydrochloride Tablet for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet's film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide, FD&C blue # 2 aluminum lake, and other ingredients. 2f444b6e-figure-01

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride with a chemical name of (3S-cis )-2(3H )-Furanone, 3-ethyl-dihydro-4-[(1-methyl-1H-imidazol-5-yl)methyl] mono- hydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet and the tablet’s film coating are: microcrystalline cellulose, stearic acid and opadry II (White). Opadry II (White) contains hypromellose, polydextrose, polyethylene glycol, titanium dioxide and triacetin. pilocarpine-hcl

Pilocarpine hydrochloride ophthalmic solution is a cholinergic agonist prepared as a sterile topical ophthalmic solution. The active ingredient is represented by the chemical structure: Established name: pilocarpine hydrochloride Chemical name: 2(3 H )-furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)-methyl]- monohydrochloride, (3S- cis )-. Molecular Formula: C 11 H 16 N 2 O 2 • HCl; Molecular Weight: 244.72 g/mol. Each mL of contains: Active: pilocarpine hydrochloride 1% (10 mg/mL), 2% (20 mg/mL), or 4% (40 mg/mL). Preservative: benzalkonium chloride 0.01%. Inactives: hypromellose 2910, boric acid, sodium citrate, sodium chloride (present in 1% only); hydrochloric acid and/or sodium hydroxide (to adjust pH); purified water. Pilocarpine hydrochloride ophthalmic solution has a pH of 3.5 to 5.5 and an osmolality of 290 to 350 mOsm/kg (1% and 2% products) and 550 to 600 mOsm/kg (4% product). Chemical Diagram

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S- cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl]monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Chemical Structure

Pilocarpine Hydrochloride Tablets contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, with a chemical name of (3 S-cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet's film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide and other ingredients. Each 7.5 mg Pilocarpine Hydrochloride Tablet for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet's film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide, FD&C blue # 2 aluminum lake, and other ingredients. Strructural Formula

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S- cis )-2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl]monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet's film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc.

Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride,USP, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a white crystalline powder or colorless crystals, hygroscopic which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, with a chemical name of (3 S-cis )-2(3 H )-Furanone, 3-ethyl-dihydro-4-[(1-methyl-1 H -imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72 g/mol. Each 5 mg pilocarpine hydrochloride tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride, USP. Inactive ingredients in the tablet and the tablet’s film coating are: colloidal silicon dioxide, hypromellose Type 2910/ 3cP, 6cP, and 50cP, polyethylene glycol, microcrystalline cellulose, stearic acid, polydextrose, titanium dioxide, triacetate and triacetin. Chemical Structure

Pilocarpine hydrochloride ophthalmic solution USP, 1.25% is a cholinergic muscarinic receptor agonist prepared as an isotonic, clear, colorless, sterile ophthalmic solution containing 1.25% of pilocarpine hydrochloride, USP. The chemical name for pilocarpine hydrochloride, USP is (3S,4R)-3-ethyl-4-[(1-methyl-1H-imidazol-5-yl)methyl]-oxolan-2-one hydrochloride. Its molecular weight is 244.72 g/mol and its molecular formula is C 11 H 16 N 2 O 2 · HCl. Its structural formula is: Pilocarpine hydrochloride, USP is a white or almost white, crystalline powder or colorless crystals hygroscopic. It is very soluble in water and freely soluble in alcohol, slightly soluble in chloroform and insoluble in ether. Each mL of Pilocarpine Hydrochloride Ophthalmic Solution, USP contains: Active: Pilocarpine hydrochloride USP, 1.25% (12.5 mg) equivalent to 1.06% (10.6 mg) pilocarpine free-base. Preservative: Benzalkonium chloride, 0.0075%. Inactives: Boric acid, sodium citrate dihydrate, sodium chloride, water for injection and may also include hydrochloric acid and/or sodium hydroxide for pH adjustment to between 3.5 and 5.5, if necessary. 1

QLOSI (pilocarpine hydrochloride ophthalmic solution) 0.4% is a sterile, clear, colorless to slightly yellowish and slightly viscous ophthalmic solution for topical ophthalmic use which has a pH between 5.1-6.1. The structural formula of pilocarpine hydrochloride is: The chemical name for pilocarpine hydrochloride is: 2(3 H )-Furanone, 3-ethyldihydro-4-[(1-methyl-1 H -imidazol-5-yl)- methyl]-monohydrochloride, (3 S -cis). Its molecular weight is 244.72 g/mol and its molecular formula is C 11 H 16 N 2 O 2 ∙ HCl. Each mL contains 0.4% (4 mg) of pilocarpine hydrochloride as the active ingredient, equivalent to 0.3% (3.4 mg) of pilocarpine free-base. The inactive ingredients in QLOSI are: hypromellose, sodium chloride, sodium hyaluronate, edetate disodium dihydrate, water for injection, and may also include sodium hydroxide and/or hydrochloric acid for pH adjustment. QLOSI does not contain an anti-microbial preservative. Chemical Structure

SALAGEN ® Tablets contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride is a hygroscopic, odorless, bitter tasting white crystal or powder which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, with a chemical name of (3 S-cis )-2(3 H )-Furanone, 3-ethyl-dihydro-4-[(1-methyl-1 H -imidazol-5-yl)methyl] mono-hydrochloride, has a molecular weight of 244.72. Each 5 mg SALAGEN ® Tablet for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet’s film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide and other ingredients. Each 7.5 mg SALAGEN ® Tablet for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet, the tablet’s film coating, and polishing are: carnauba wax, hypromellose, microcrystalline cellulose, stearic acid, titanium dioxide, FD&C blue#2 aluminum lake, and other ingredients. structure

VUITY (pilocarpine hydrochloride ophthalmic solution) 1.25% is a cholinergic muscarinic receptor agonist prepared as an isotonic, clear, colorless, sterile ophthalmic solution containing 1.25% of pilocarpine hydrochloride. The chemical name for pilocarpine hydrochloride is (3S,4R)-3-ethyl-4-[(1-methyl-1H-imidazol-5-yl)methyl]oxolan-2-one hydrochloride. Its molecular weight is 244.72 and its molecular formula is C 11 H 16 N 2 O 2 · HCl. Its structural formula is: Each mL of VUITY contains pilocarpine hydrochloride 1.25% (12.5 mg) as the active ingredient, equivalent to 1.06% (10.6 mg) pilocarpine free-base. Preservative is: benzalkonium chloride 0.0075%. Inactive ingredients in the ophthalmic solution are: boric acid, sodium citrate dihydrate, sodium chloride, purified water, and may also include hydrochloric acid and/or sodium hydroxide for pH adjustment to between 3.5 and 5.5, if necessary. structural formula