olanzapine - Generic Medications

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). 138

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for Injection is a sterile, yellow color lyophilized cake or powder and is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 µmol) olanzapine USP with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. checmical-structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). 138

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. srtucture

Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each film-coated tablet contains olanzapine, USP equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH101) and microcrystalline cellulose (Avicel PH102). The color coating contains hypromellose, titanium dioxide and triacetin.

Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 micromol), 5 mg (16 micromol), 7.5 mg (24 micromol), 10 mg (32 micromol), 15 mg (48 micromol), or 20 mg (64 micromol). Inactive ingredients: crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Coating ingredients: 2.5 mg, 5 mg, 7.5 mg and 10 mg tablets, hypromellose, titanium dioxide and sodium lauryl sulfate), 15 mg tablets, hypromellose, titanium dioxide, FD&C Blue #2 Aluminum Lake and FD&C Yellow #6 Aluminum Lake, 20 mg tablets hypromellose, titanium dioxide, talc and iron oxide red. image description

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43 g/mol. The chemical structure is: Olanzapine is a yellow powder. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, mannitol, microcrystalline cellulose and sucralose. Meets USP Disintegration Test 2 structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water Olanzapine tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43. The chemical structure is: Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), ferric oxide yellow (20 mg), hydroxypropyl cellulose, hypromellose, polyethylene glycol and titanium dioxide (all strengths). structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). 138

Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is soluble in n-propanol; sparingly soluble in acetonitrile; slightly soluble in methanol and in dehydrated alcohol; practically insoluble in water. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine, USP equivalent to 5 mg, 10 mg, 15 mg or 20 mg. It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets, USP also contain the following inactive ingredients: aspartame, colloidal silicon dioxide, low-substituted hydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose and strawberry flavor 52311 AP 0551 which contains artificial flavors, benzyl alcohol, maltodextrin, propylene glycol and triethyl citrate. Olanzapine orally disintegrating tablets meets USP Disintegration Test 2. structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation 10H-Thieno[2,3-b][1,5]benzodiazepine, 2-methyl-4-(4-methyl-1-piperazinyl)-. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.4. The chemical structure is: Olanzapine is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in Acetonitrile, slightly soluble in Methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. olanzapineforinj10mgvialstructure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43. The chemical structure is: Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), hydroxypropyl cellulose, hypromellose, iron oxide yellow (20 mg), polyethylene glycol and titanium dioxide (all strengths). structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: [138] Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg).

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: aspartame, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose and sodium stearyl fumarate. The product meets USP Disintegration Test 2. Chemical Structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. srtucture

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Diluted hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). 138

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43 g/mol. The chemical structure is: Olanzapine is a yellow powder. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, mannitol, microcrystalline cellulose and sucralose. Meets USP Disintegration Test 2 structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients lactose monohydrate 50 mg and tartaric acid 3.5 mg. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets, USP also contains the following inactive ingredients: aspartame, crospovidone, magnesium stearate, mannitol, silicone dioxide, sorbitol, talc, and artificial pineapple flavor. Meets USP Disintegration Test 2 Chemical structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43. The chemical structure is: Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), ferric oxide yellow (20 mg), hydroxypropyl cellulose, hypromellose, polyethylene glycol and titanium dioxide (all strengths).

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 15 mg (48 μmol) and 20 mg (64 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. srtucture

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43. The chemical structure is: Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), ferric oxide yellow (20 mg), hydroxypropyl cellulose, hypromellose, polyethylene glycol and titanium dioxide (all strengths). structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets, USP also contains the following inactive ingredients: aspartame, microcrystalline cellulose, low substituted hydroxypropyl cellulose, crospovidone and magnesium stearate. The drug product meets USP Disintegration Test 2. olanzapine-odt-structure

Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each film-coated tablet contains olanzapine, USP equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH101) and microcrystalline cellulose (Avicel PH102). The color coating contains hypromellose, titanium dioxide and triacetin. olanzapine-spl-strc

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 15 mg (48 μmol) and 20 mg (64 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide.

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ][1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.43 g/mol. The chemical structure is: Olanzapine is a yellow powder. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol) or 20 mg (64 mcmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets also contain the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, mannitol, microcrystalline cellulose and sucralose. Meets USP Disintegration Test 2 structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. srtucture

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Structure

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets USP are intended for oral administration only. Each tablet contains olanzapine USP equivalent to 2.5 mg (8 µmol), 5 mg (16 µmol), 7.5 mg (24 µmol) and 10 mg (32 µmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH 101) and microcrystalline cellulose (Avicel PH 102). The color coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. srtucture

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). 138

Olanzapine orally disintegrating tablets, USP are an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine and has the following chemical structure: C 17 H 20 N 4 S M.W. 312.44 Olanzapine, USP is a yellow crystalline powder, which is practically insoluble in water. Olanzapine orally disintegrating tablets, USP are intended for oral administration only. Each orally disintegrating tablet contains olanzapine, USP equivalent to 5 mg (16 micromol), 10 mg (32 micromol), 15 mg (48 micromol) or 20 mg (64 micromol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. Olanzapine orally disintegrating tablets, USP also contain the following inactive ingredients: aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, sodium stearyl fumarate, strawberry flavor and xylitol. Meets USP Disintegration Test 2. Structural Formula

Olanzapine USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 indigo carmine Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg).

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Olanzapine for injection is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. ZYPREXA IntraMuscular (olanzapine for injection) is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10 H -thieno[2,3- b ] [1,5]benzodiazepine. The molecular formula is C 17 H 20 N 4 S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. ZYPREXA IntraMuscular (olanzapine for injection) is intended for intramuscular use only. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. Chemical Structure

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. zyprexa-f001-v1

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. zyprexa-f001-v1

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. zyprexa-f001-v1

ZYPREXA (olanzapine) is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is: Olanzapine is a yellow crystalline solid, which is practically insoluble in water. ZYPREXA tablets are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are carnauba wax, crospovidone, hydroxypropyl cellulose, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, and other inactive ingredients. The color coating contains Titanium Dioxide (all strengths), FD&C Blue No. 2 Aluminum Lake (15 mg), or Synthetic Red Iron Oxide (20 mg). The 2.5, 5, 7.5, and 10 mg tablets are imprinted with edible ink which contains FD&C Blue No. 2 Aluminum Lake. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) is intended for oral administration only. Each orally disintegrating tablet contains olanzapine equivalent to 5 mg (16 μmol), 10 mg (32 μmol), 15 mg (48 μmol) or 20 mg (64 μmol). It begins disintegrating in the mouth within seconds, allowing its contents to be subsequently swallowed with or without liquid. ZYPREXA ZYDIS (olanzapine orally disintegrating tablets) also contains the following inactive ingredients: gelatin, mannitol, aspartame, sodium methyl paraben, and sodium propyl paraben. Each single-dose vial provides for the administration of 10 mg (32 μmol) olanzapine with inactive ingredients 50 mg lactose monohydrate and 3.5 mg tartaric acid. Hydrochloric acid and/or sodium hydroxide may have been added during manufacturing to adjust pH. zyprexa-f001-v1