lidocaine hydrochloride - Generic Medications
Browse 278 brand name versions of lidocaine hydrochloride. Review brand names, dosage forms, strengths, and linked product records.
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Chemical Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: Volume (Total Lidocaine HCl) Lidocaine Hydrochloride (mg/mL) pH For Direct Intravenous Injection: 5 mL (100 mg) 20 5.0 to 7.0 Single-dose: 5 mL (50 mg) 10 5.0 to 7.0 May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14 H 22 N 2 O • HCl • H 2 O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. structural formula lidocaine hydrochloride
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine 3% Cream is a topical anesthetic indicated for the relief of pruritus, pruritic eczemas, abrasions, minor burns, insect bites, pain, soreness, and discomfort due to pruritus ani, pruritus vulvae, hemorrhoids, anal fissures, and similar conditions of the skin and mucous membranes.
Rx only DESCRIPTION Lidocaine Hydrochloride Topical Solution, USP contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Each mL contains: lidocaine hydrochloride, USP .................................................................................................... 40 mg Methylparaben, Sodium Hydroxide (to adjust pH) in an aqueous solution. NOT FOR INJECTION. Lidocaine is a local anesthetic chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It has the following structural formula: chem-structure-lidocaine.jpg
Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O • HCl, and has the following structural formula: Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% 2% Amount (Per mL) Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg £ 20 mg µ Sodium Chloride 7 mg 6 mg Methylparaben 1 mg 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). lidocainestructure
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O •HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Formula1.jpg
Lidocaine Hydrochloride Topical Solution, USP 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution, USP 4% contains lidocaine hydrochloride monohydrate, which is chemically designated as 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate and has the following structural formula: C 14 H 22 N 2 O ∙ HCl ∙ H 2 0 M.W. 288.81 Each mL contains: Lidocaine Hydrochloride Monohydrate, USP...............................40 mg Inactive Ingredients: methylparaben, propylene glycol and purified water. It may also contain sodium hydroxide for pH adjustment. The pH range is between 5.0 and 7.0. An aqueous solution for topical use only. NOT FOR INJECTION. Lidocaine-01
Lidocaine Viscous 2% (Lidocaine Hydrochloride Oral Topical Solution USP) contains a local anesthetic agent and is administered topically. Lidocaine Viscous 2% (Lidocaine Hydrochloride Oral Topical Solution USP) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-,monohydrochloride, and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. Composition of Solution : Each mL contains 20 mg (2%) of lidocaine hydrochloride USP and the following inactive ingredients: carboxymethylcellulose sodium, flavoring, methylparaben, propylparaben, purified water and saccharin sodium. chem-structure.jpg
Lidocaine Hydrochloride Oral Topical Solution, USP 2% (Viscous) contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution, USP 2% (Viscous) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structural formula: The molecular formula of lidocaine hydrochloride is C 14 H 22 N 2 O • HCl • H 2 O. The molecular weight is 288.81. Lidocaine Hydrochloride Monohydrate Chemical Structure COMPOSITION OF SOLUTION: Each mL contains 20 mg of lidocaine HCl, carboxymethylcellulose sodium, flavoring, methylparaben, propylparaben, purified water, and saccharin sodium. The pH of the drug product is 5.0 to 7.0.
Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine hydrochloride injection, USP is by injection, for infiltration and nerve block. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O • HCl•H 2 O, and has the following structural formula: Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 7 mg per mL Lidocaine Hydrochloride, USP (Monohydrate). Ingredients Strength 1% Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg £ Sodium Chloride 7 mg Methylparaben 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid Structural Formula
Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O • HCl•H 2 O, and has the following structural formula: Each single-dose vial contains Lidocaine Hydrochloride Injection, USP, which is a sterile, nonpyrogenic, clear, colorless aqueous solution intended for parenteral administration. [see Indications and Usage (1) ] for special uses. Each mL contains 20 mg lidocaine hydrochloride and 6 mg sodium chloride, in Water for Injection. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH between 5.0 and 7.0. Chemical Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C14H22N2O • HCl • H2O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Table 1 Structure
Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O HClH 2 O, and has the following structural formula: Lidocaine Hydrochloride Injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingradients Strengths 1% Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg£ Sodium Chloride 7 mg Methylparaben 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid £ Quantity is equivalent to 10 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Structure
Lidocaine HCl Topical Solution USP, 4% is a sterile, aqueous solution containing a local anesthetic agent and is administered topically. Lidocaine hydrochloride is designated chemically as acetamide, 2-(diethylamino)-N-(2, 6-dimethylphenyl)-monohydrochloride, with the following structural formula: Composition of Lidocaine HCl 4% Topical Solution: Each mL of aqueous solution contains lidocaine HCl, 40 mg, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. No preservative is added since all or part of the contents of the syringe unit is administered as a single dose and the unit should not be re-used. structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride USP is a white, odorless, crystalline powder. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, clear, colorless, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Chemical Structure
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. lidocainestructure
Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as Lidocaine Hydrochloride Injection-Methylparaben Free indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O • HCl•H 2 O, and has the following structural formula: Lidocaine Hydrochloride Injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% 2% Amount (Per mL) Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg* 20 mg£ Sodium Chloride 7 mg 6 mg Methylparaben 1 mg 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid * Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). £ Quantity is equivalent to 21.3 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine Hydrochloride Injection, USP-Methylparaben Free is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% 2% Amount (Per mL) Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg* 20 mg£ Sodium Chloride 7 mg 6 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid figure 1
Lidocaine Hydrochloride Oral Topical Solution, USP, 2% (viscous) contains a local anesthetic agent and is administered topically. Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. COMPOSITION OF SOLUTION Each mL contains 20 mg of lidocaine HCl, wild cherry flavor, methylparaben, propylparaben, saccharin sodium, sodium carboxymethylcellulose, and sodium hydroxide in purified water. The pH is adjusted to 5.0 to 7.0 with hydrochloric acid and/or sodium hydroxide. image description
Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. Chemical Structure
Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. Chemical Structure
Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple‑dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), monohydrochloride monohydrate and has the molecular weight is of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14 H 22 N 2 O•HCl•H 2 O, and has the following structural formula: Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution containing lidocaine hydrochloride and sodium chloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine hydrochloride (anhydrous) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as an antiseptic preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0) [See How Supplied/Storage and Handling (16) ] for various sizes and strengths. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical structure
Uses Temporary pain relief for minor bums
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride USP is a white, odorless, crystalline powder. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, clear, colorless, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Chemical Structure
Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Lidocaine Hydrochloride Jelly USP, 2% also contains sodium carboxymethylcellulose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine Hydrochloride Jelly USP, 2%: Each mL contains 20 mg of lidocaine HCI. The formulation also contains sodium carboxymethylcellulose and sodium hydroxide and/or hydrochloric acid to adjust pH between 6.0 to 7.0. Chemical Structure
Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2O • HCl•H2O, and has the following structural formula: Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg£ Sodium Chloride 7 mg Methylparaben 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid £Quantity is equivalent to 10.7 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg£ Sodium Chloride 7 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid £Quantity is equivalent to 10.7 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). "Image Description"
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine Hydrochloride Oral Topical Solution, USP 2% (Viscous) contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution, USP 2% (Viscous) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structural formula: The molecular formula of lidocaine hydrochloride is C 14 H 22 N 2 O • HCl • H 2 O. The molecular weight is 288.81. COMPOSITION OF SOLUTION: Each mL contains 20 mg of lidocaine HCl, carboxymethylcellulose sodium, flavoring, methylparaben, propylparaben, purified water, and saccharin sodium. The pH of the drug product is 5.0 to 7.0. Lidocaine Hydrochloride Monohydrate Chemical Structure
Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, purified water, and sodium hydroxide to adjust pH to 6.0-7.0. An aqueous solution. NOT FOR INJECTION. lido-nomenclature
Lidocaine Hydrochloride Injection USP, is a sterile, aqueous solution of lidocaine, an antiarrhythmic agent, prepared with the aid of hydrochloric acid. It is intended for intravenous administration by either direct injection or continuous infusion. Lidocaine hydrochloride is designated 2-(Diethylamino)-2’, 6’-acetoxylidide monohydrochloride and isrepresented by the following structural formula: *pH of the above solution adjusted with sodium hydroxide and/or hydrochloric acid to finished product pH limits between 5 and 7. The medication and fluid pathway of these disposable syringes are sterile and nonpyrogenic in the original, unopened package with component caps in place. These dosage forms do not contain preservatives; once the unit is assembled and used, any remaining portion of the solution must be discarded with the entire unit. Molecular Structure
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C 14 H 22 N 2 O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Lidocaine Chemical Structure
Use Temporarily relieves pain associated with minor burns.
Lidocaine Hydrochloride Injections are sterile, nonpyrogenic, aqueous, isotonic solutions that contain a local anesthetic agent and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Each mL of the 1% solution contains lidocaine hydrochloride 10 mg and sodium chloride 7 mg. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg and sodium chloride 6 mg. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14 H 22 N 2 O • HCl) has the following structural formula: structure-1
Lidocaine Hydrochloride Injections are sterile, nonpyrogenic, aqueous, isotonic solutions that contain a local anesthetic agent and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Each mL of the 1% solution contains lidocaine hydrochloride 10 mg and sodium chloride 7 mg. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg and sodium chloride 6 mg. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14 H 22 N 2 O • HCl) has the following structural formula: structure-1
Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Lidocaine Hydrochloride Jelly USP, 2% also contains sodium carboxymethylcellulose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine Hydrochloride Jelly USP, 2%: Each mL contains 20 mg of lidocaine HCI. The formulation also contains sodium carboxymethylcellulose and sodium hydroxide and/or hydrochloric acid to adjust pH between 6.0 to 7.0. Formula1.jpg
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C 14 H 22 N 2 O•HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. structure
Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION.
Rx only DESCRIPTION Lidocaine Hydrochloride Topical Solution, USP contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Each mL contains: Lidocaine Hydrochloride, USP 40 mg Methylparaben, sodium hydroxide (to adjust pH) in an aqueous solution. NOT FOR INJECTION. Lidocaine is a local anesthetic chemically designated as 2-(diethylamino)-N-(2,6-dimethylphenyl) acetamide monohydrochloride, monohydrate. It has the following structural formula: structural-formula
Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Lidocaine Hydrochloride Jelly USP, 2% also contains sodium carboxymethylcellulose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine Hydrochloride Jelly USP, 2%: Each mL contains 20 mg of lidocaine HCI. The formulation also contains sodium carboxymethylcellulose and sodium hydroxide and/or hydrochloric acid to adjust pH between 6.0 to 7.0. Formula1.jpg
Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C14H22N2O • HCl) has the following structural formula: Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Formula1.jpg
Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically (see INDICATIONS AND USAGE for specific uses). Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: Lidocaine Hydrochloride Jelly USP, 2% also contains sodium carboxymethylcellulose, and the resulting mixture maximizes contact with mucosa and provides lubrication for instrumentation. The unused portion should be discarded after initial use. Composition of Lidocaine Hydrochloride Jelly USP, 2%: Each mL contains 20 mg of lidocaine HCI. The formulation also contains sodium carboxymethylcellulose and sodium hydroxide and/or hydrochloric acid to adjust pH between 6.0 to 7.0. Formula1.jpg
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride in water for injection for parenteral administration in various concentrations with characteristics as follows: Concentration 0.5% 1% 1.5% 2% mg/mL lidocaine HCl (anhyd.) 5 10 15 20 mg/mL sodium chloride 8 7 6.5 6 Multiple-dose vials contain 0.1% of methylparaben added as preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0). See HOW SUPPLIED section for various sizes and strengths. Lidocaine is a local anesthetic of the amide type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethylamino)-N-(2,6-dimethylphenyl)-acetamide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. Chemical Structure
Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution USP, 2% (Viscous) contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. Chemical Structure
Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as Lidocaine Hydrochloride Injection-Methylparaben Free indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2O • HCl•H2O, and has the following structural formula: Lidocaine Hydrochloride Injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% 2% Amount (Per mL) Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg* 20 mg£ Sodium Chloride 7 mg 6 mg Methylparaben 1 mg 1 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid * Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). £ Quantity is equivalent to 21.3 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine Hydrochloride Injection, USP-Methylparaben Free is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Ingredients Strength 1% 2% Amount (Per mL) Amount (Per mL) Lidocaine Hydrochloride (Anhydrous) 10 mg* 20 mg£ Sodium Chloride 7 mg 6 mg Sodium Hydroxide Added for pH Adjustment to approximately 6.5 (5.0 to 7.0) Hydrochloric Acid figure 1
Lidocaine Hydrochloride Oral Topical Solution, USP, 2% (viscous) contains a local anesthetic agent and is administered topically. Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)- N -(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula: The molecular formula of lidocaine is C 14 H 22 N 2 O. The molecular weight is 234.34. COMPOSITION OF SOLUTION Each mL contains 20 mg of lidocaine HCl, wild cherry flavor, methylparaben, propylparaben, saccharin sodium, sodium carboxymethylcellulose, and sodium hydroxide in purified water. The pH is adjusted to 5.0 to 7.0 with hydrochloric acid and/or sodium hydroxide. image description
Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics: Volume (Total Lidocaine HCl) Lidocaine Hydrochloride (mg/mL) pH For Direct Intravenous Injection: 5 mL (100 mg) 20 5.0 to 7.0 Single-dose: 5 mL (50 mg) 10 5.0 to 7.0 May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14 H 22 N 2 O • HCl • H 2 O. The molecular weight is 288.82. It has the following structural formula: The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. structural formula lidocaine hydrochloride
About lidocaine hydrochloride Generic Drugs
This collection groups medications in our database under the generic name lidocaine hydrochloride. It currently includes 278 matching listings. Open any result to review brand context, dosage forms, ingredients, and label-backed details.
What You Can Review
Use this page to compare the set of products we have indexed for this generic name. Each result links to more detailed product information and related landing pages.
Safety Information
Always consult a qualified healthcare professional before starting, stopping, or switching any medication. The information on this page is educational and should not replace medical advice.