buprenorphine - Generic Medications
Browse 27 brand name versions of buprenorphine. Review brand names, dosage forms, strengths, and linked product records.
BRIXADI (buprenorphine) extended-release injection is a sterile, yellowish to yellow clear liquid provided in a single-dose, pre-filled syringe intended for subcutaneous injection only . BRIXADI is designed to deliver buprenorphine at a controlled rate over either one week or one month. The active ingredient in BRIXADI is buprenorphine free base, a partial opioid agonist. BRIXADI is provided in multiple doses with two durations (weekly and monthly). BRIXADI (weekly; 8, 16, 24, 32 mg) consists of 50 mg/mL buprenorphine. The inactive ingredients include dehydrated alcohol (12% v/v), glycerol dioleate (43% v/v), and soybean phosphatidylcholine (41% w/v). BRIXADI (monthly; 64, 96, 128 mg) consists of 356 mg/mL buprenorphine. The inactive ingredients include glycerol dioleate (24% v/v), methylpyrrolidone (31% v/v), and soybean phosphatidylcholine (15% w/v). Upon injection, BRIXADI spontaneously transforms from a low viscous solution to a liquid crystalline gel that encapsulates buprenorphine and releases it at a steady rate as the depot biodegrades. Different drug product strengths, or doses, are accomplished by different syringe fill volumes [see Dosage Forms and Strengths (3) ]. The molecular weight of buprenorphine free base is 467.65 g/mol, and its molecular formula is C29H41NO4. Chemically, buprenorphine is: (2S)-2-[17-(Cyclopropylmethyl)-4,5α-epoxy-3-hydroxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol. The structural formula is: Chemical Structure
Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is (5R,6R,7R,9R,13S,14S)-17-Cyclopropylmethyl-7-[(S)-3,3-dimethyl-2-hydroxybutan-2-yl]-6-methoxy-4,5-epoxy-6,14-ethanomorphinan-3-ol. The structural formula is: The molecular weight of buprenorphine is 467.64; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white crystalline powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol, and slightly soluble in cyclohexane. It dissolves in dilute solutions of acids. The pKa is 8.35 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine transdermal system 5 6.25 4.75 Buprenorphine transdermal system 7.5 9.375 7.125 Buprenorphine transdermal system 10 12.5 9.5 Buprenorphine transdermal system 15 18.75 14.25 Buprenorphine transdermal system 20 25 19.00 Buprenorphine transdermal system is a rectangular or square, tan-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum. structure fig1
Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine transdermal system 5 mcg/hr 6.25 5 Buprenorphine transdermal system 7.5 mcg/hr 9.375 7.5 Buprenorphine transdermal system 10 mcg/hr 12.5 10 Buprenorphine transdermal system 15 mcg/hr 18.75 15 Buprenorphine transdermal system 20 mcg/hr 25 20 Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone. Structural Formula Figure 1: Cross-Section
Buprenorphine sublingual tablet is uncoated, round, biconvex, white to off-white tablet. It contains buprenorphine hydrochloride USP, a partial agonist at the mu-opioid receptor, and is available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP). Each tablet also contains lactose monohydrate, mannitol, povidone, anhydrous citric acid, sodium citrate, butylated hydroxyanisole, corn starch, pregelatinized starch, and magnesium stearate. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is an off-white crystalline powder, slightly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. buprenorphine-str
Buprenorphine is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)-α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the molecular formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5 mcg/hour, 7.5 mcg/hour, 10 mcg/hour, 15 mcg/hour, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Active Surface Total Buprenorphine Rate (mcg/hour) Area (cm 2 ) Content (mg) Buprenorphine transdermal system 5 6.88 5 Buprenorphine transdermal system 7.5 10.313 7.5 Buprenorphine transdermal system 10 13.75 10 Buprenorphine transdermal system 15 20.625 15 Buprenorphine transdermal system 20 27.5 20 Buprenorphine transdermal system is a square, tan-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a tan-colored web backing layer; (2) a separating layer over the buprenorphine-containing adhesive matrix; (3) the buprenorphine-containing adhesive matrix; and (4) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, citric acid, and acrylate copolymer adhesive. structure fig1
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane.
Buprenorphine sublingual tablet is uncoated, round, biconvex, white to off-white tablet. It contains buprenorphine hydrochloride USP, a partial agonist at the mu-opioid receptor, and is available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP). Each tablet also contains lactose monohydrate, mannitol, povidone, anhydrous citric acid, sodium citrate, butylated hydroxyanisole, corn starch, pregelatinized starch, and magnesium stearate. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is an off-white crystalline powder, slightly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. buprenorphine-str
Buprenorphine Transdermal System is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. Chemical Structure System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine Transdermal System 5 6.25 5 Buprenorphine Transdermal System 7.5 9.375 7.5 Buprenorphine Transdermal System 10 12.5 10 Buprenorphine Transdermal System 15 18.75 15 Buprenorphine Transdermal System 20 25 20 Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine- containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum. Figure 1
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemical Structure
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane.
Buprenorphine Sublingual Tablets are supplied as white, sublingual tablets available in two dosage strengths, 2 mg buprenorphine free base and 8 mg buprenorphine free base. Each tablet also contains citric acid anhydrous, corn starch, crospovidone, lactose monohydrate, magnesium stearate, mannitol, povidone, purified water and sodium citrate. Chemically, buprenorphine hydrochloride, USP is (6R, 7R, 14S)-17-Cyclopropylmethyl-7,8-dihydro-7-[(1S)-1-hydroxy-1,2,2-trimethylpropyl]-6-O-methyl-6,14-ethano-17-normorphine hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is a white or almost white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane, acetone, and ethylacetate. chem-fig
Buprenorphine sublingual tablets are uncoated orange oval tablets, imprinted with a logo on one side and a numeric imprint on the other side. The tablets contain buprenorphine HCl, USP and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base). Each tablet also contains citric acid anhydrous, crospovidone, FD&C Yellow #6 HT Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, pregelatinized starch (maize), povidone, sodium citrate dihydrate. Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl, USP has the molecular formula C 2 9 H 4 1 NO 4 •HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. The following chemical structure for Buprenorphine HCl, USP has the molecular formula C29 H41 NO4 • HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane.
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Structure
Buprenorphine sublingual tablet is uncoated, round, biconvex, white to off-white tablet. It contains buprenorphine hydrochloride USP, a partial agonist at the mu-opioid receptor, and is available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP). Each tablet also contains lactose monohydrate, mannitol, povidone, anhydrous citric acid, sodium citrate, butylated hydroxyanisole, corn starch, pregelatinized starch, and magnesium stearate. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is an off-white crystalline powder, slightly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. buprenorphine-str
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemical Structure
Buprenorphine Sublingual Tablets are supplied as white, sublingual tablets available in two dosage strengths, 2 mg buprenorphine free base and 8 mg buprenorphine free base. Each tablet also contains citric acid anhydrous, corn starch, crospovidone, lactose monohydrate, magnesium stearate, mannitol, povidone, purified water and sodium citrate. Chemically, buprenorphine hydrochloride, USP is (6R, 7R, 14S)-17-Cyclopropylmethyl-7,8-dihydro-7-[(1S)-1-hydroxy-1,2,2-trimethylpropyl]-6-O-methyl-6,14-ethano-17-normorphine hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is a white or almost white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane, acetone, and ethylacetate. chem-fig
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemical Structure
Buprenorphine sublingual tablet is uncoated, round, biconvex, white to off-white tablet. It contains buprenorphine hydrochloride USP, a partial agonist at the mu-opioid receptor, and is available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP). Each tablet also contains lactose monohydrate, mannitol, povidone, anhydrous citric acid, sodium citrate, butylated hydroxyanisole, corn starch, pregelatinized starch, and magnesium stearate. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is an off-white crystalline powder, slightly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. buprenorphine-str
Buprenorphine sublingual tablet is uncoated, round, biconvex, white to off-white tablet. It contains buprenorphine hydrochloride USP, a partial agonist at the mu-opioid receptor, and is available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP). Each tablet also contains lactose monohydrate, mannitol, povidone, anhydrous citric acid, sodium citrate, butylated hydroxyanisole, corn starch, pregelatinized starch, and magnesium stearate. Chemically, buprenorphine hydrochloride is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine hydrochloride, USP has the molecular formula C 29 H 41 NO 4 • HCl and the molecular weight is 504.10. It is an off-white crystalline powder, slightly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. buprenorphine-str
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane.
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane.
Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is (5R,6R,7R,9R,13S,14S)-17-Cyclopropylmethyl-7-[(S)-3,3-dimethyl-2-hydroxybutan-2-yl]-6-methoxy-4,5-epoxy-6,14-ethanomorphinan-3-ol. The structural formula is: The molecular weight of buprenorphine is 467.64; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white crystalline powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol, and slightly soluble in cyclohexane. It dissolves in dilute solutions of acids. The pKa is 8.35 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine transdermal system 5 6.25 4.75 Buprenorphine transdermal system 7.5 9.375 7.125 Buprenorphine transdermal system 10 12.5 9.5 Buprenorphine transdermal system 15 18.75 14.25 Buprenorphine transdermal system 20 25 19.00 Buprenorphine transdermal system is a rectangular or square, tan-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum. structure fig1
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemical Structure
Buprenorphine Sublingual Tablets are supplied as white to off white, round flat-faced beveled edged tablets debossed with "RP" on one side and an alphanumeric word identifying product and strength on the other side. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and are available in two dosage strengths, 2 mg buprenorphine and 8 mg buprenorphine (as the free base, equivalent to 2.16 mg buprenorphine hydrochloride USP and 8.64 mg buprenorphine hydrochloride USP, respectively). Each tablet also contains lactose monohydrate, povidone K29/32, anhydrous citric acid, trisodium citrate dihydrate, corn starch, mannitol, crospovidone, and magnesium stearate. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure: Buprenorphine HCl has the molecular formula C 29 H 41 NO 4 ∙ HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane.
Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of buprenorphine transdermal system are available: 5 mcg/hour, 7.5 mcg/hour, 10 mcg/hour, 15 mcg/hour, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) Buprenorphine Transdermal System 5 6.25 5 Buprenorphine Transdermal System 7.5 9.375 7.5 Buprenorphine Transdermal System 10 12.5 10 Buprenorphine Transdermal System 15 18.75 15 Buprenorphine Transdermal System 20 25 20 Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: cross-linked polyacrylate, levulinic acid, oleyl oleate, and kollidon 90F.
BUTRANS is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is: The molecular weight of buprenorphine is 467.6; the empirical formula is C 29 H 41 NO 4 . Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure Five different strengths of BUTRANS are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: BUTRANS Product Specifications Buprenorphine Delivery Rate (mcg/hour) Active Surface Area (cm 2 ) Total Buprenorphine Content (mg) BUTRANS 5 6.25 5 BUTRANS 7.5 9.375 7.5 BUTRANS 10 12.5 10 BUTRANS 15 18.75 15 BUTRANS 20 25 20 BUTRANS is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of BUTRANS (not to scale). The active ingredient in BUTRANS is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum. Chemical Structure Fig 1
SUBLOCADE (buprenorphine extended-release) injection is a clear, viscous, colorless to yellow to amber, sterile solution for subcutaneous injection only . It is designed to deliver buprenorphine at a controlled rate over a one month period. The active ingredient in SUBLOCADE is buprenorphine free base, a mu-opioid receptor partial agonist and a kappa-opioid receptor antagonist. Buprenorphine is dissolved in the ATRIGEL ® delivery system at 18% by weight. The ATRIGEL ® delivery system is a biodegradable 50:50 poly(DL-lactide-co-glycolide) polymer and a biocompatible solvent, N -methyl-2-pyrrolidone (NMP). SUBLOCADE is provided in dosage strengths of 100 mg and 300 mg. Table 6 presents the delivered amounts of the raw materials and the approximate delivered volume for the two dosage strengths. Table 6 Amounts of Raw Materials and Delivered Volume for the Dosage Strengths Raw Materials in SUBLOCADE 100 mg Dosage 300 mg Dosage Buprenorphine 100 mg 300 mg Poly(DL-lactide-co-glycolide) 178 mg 533 mg N -methyl-2-pyrrolidone 278 mg 833 mg Approximate Delivered Volume 0.5 mL 1.5 mL The molecular weight of buprenorphine free base is 467.6, and its molecular formula is C 29 H 41 NO 4 . Chemically, buprenorphine is (2S)-2-[17-(Cyclopropylmethyl)-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol. The structural formula is: Structural Formula
About buprenorphine Generic Drugs
This collection groups medications in our database under the generic name buprenorphine. It currently includes 27 matching listings. Open any result to review brand context, dosage forms, ingredients, and label-backed details.
What You Can Review
Use this page to compare the set of products we have indexed for this generic name. Each result links to more detailed product information and related landing pages.
Safety Information
Always consult a qualified healthcare professional before starting, stopping, or switching any medication. The information on this page is educational and should not replace medical advice.